firmware/variants/radiomaster_900_bandit_nano/variant.h

85 lines
1.6 KiB
C
Raw Normal View History

/*
Initial settings and work by https://github.com/uberhalit and re-work by https://github.com/gjelsoe
Unit provided by Radio Master RC
https://radiomasterrc.com/products/bandit-nano-expresslrs-rf-module with 0.96" OLED display
*/
/*
I2C SDA and SCL.
*/
#define I2C_SDA 14
#define I2C_SCL 12
/*
No GPS - but free solder pads are available inside the case.
*/
#undef GPS_RX_PIN
#undef GPS_TX_PIN
/*
Pin connections from ESP32-D0WDQ6 to SX1276.
*/
#define LORA_DIO0 22
#define LORA_DIO1 21
#define LORA_SCK 18
#define LORA_MISO 19
#define LORA_MOSI 23
#define LORA_CS 4
#define LORA_RESET 5
#define LORA_TXEN 33
/*
This unit has a FAN built-in.
FAN is active at 250mW on it's ExpressLRS Firmware.
*/
#define RF95_FAN_EN 2
/*
LED PIN setup.
*/
#define LED_PIN 15
/*
Five way button when using ADC.
2.632V, 2.177V, 1.598V, 1.055V, 0V
Possible ADC Values:
{ UP, DOWN, LEFT, RIGHT, ENTER, IDLE }
3227, 0 ,1961, 2668, 1290, 4095
*/
#define BUTTON_PIN 39
#define BUTTON_NEED_PULLUP
#define DISPLAY_FLIP_SCREEN
/*
No External notification.
*/
#undef EXT_NOTIFY_OUT
/*
Remapping PIN Names.
Note, that this unit uses RFO
*/
#define USE_RF95
#define USE_RF95_RFO
#define RF95_CS LORA_CS
#define RF95_DIO1 LORA_DIO1
#define RF95_TXEN LORA_TXEN
#define RF95_RESET LORA_RESET
#define RF95_MAX_POWER 12
/*
This module has Skyworks SKY66122 controlled by dacWrite
power rangeing from 100mW to 1000mW.
Mapping of PA_LEVEL to Power output: GPIO26/dacWrite
168 -> 100mW -> 2.11v
148 -> 250mW -> 1.87v
128 -> 500mW -> 1.63v
90 -> 1000mW -> 1.16v
*/
#define RF95_PA_EN 26
#define RF95_PA_DAC_EN
#define RF95_PA_LEVEL 90