firmware/bin/upload-to-bootloader.sh


echo "Converting to uf2 for NRF52 Adafruit bootloader"
bin/uf2conv.py .pio/build/lora-relay-v2/firmware.hex -f 0xADA52840
# cp flash.uf2 /media/kevinh/FTH*BOOT/
@BigCorvus board now kinda boots ###RTT Client: ----------------------------------------------- ###RTT Client: Connecting to J-Link RTT Server via localhost:19021 ... ###RTT Client: Connected. SEGGER J-Link V6.70c - Real time terminal output SEGGER J-Link ARM V9.6, SN=69663845 Process: JLinkGDBServerCLExe Emitting reboot packet for serial shell I2C device found at address 0x55 done Meshtastic swver=unset, hwver=unset Reset reason: 0x0 FIXME, call randomSeed ERROR: No UBLOX GPS found Hoping that NEMA might work RadioConfig reset! Initial packet id 1481765933, numPacketId 4294967295 No saved preferences found NODENUM=0xB18C3A4E, dbsize=1 Starting meshradio init... Set radio: name=Default, config=3, ch=6, power=17 SX1262 init result 0 sending owner !df5db18c3a4e/Unknown 3a4e/?4E Update DB node 0xB18C3A4E, rx_time=0 old user !df5db18c3a4e/Unknown 3a4e/?4E updating changed=0 user !df5db18c3a4e/Unknown 3a4e/?4E Adding packet record (id=0x5851F430 Fr0x4E To0xFF, WantAck0, HopLim3 Payload:User) enqueuing for send (id=0x5851F430 Fr0x4E To0xFF, WantAck0, HopLim3 encrypted) txGood=0,rxGood=0,rxBad=0 Starting low level send (id=0x5851F430 Fr0x4E To0xFF, WantAck0, HopLim3 encrypted) assert failed src/mesh/SX1262Interface.cpp: 102, virtual void SX1262Interface::setStandby(), test=err == ERR_NONE 2020-08-17 18:28:32 +00:00
			`echo "Converting to uf2 for NRF52 Adafruit bootloader"`
corvus2 gps still doesn't work WIP 2020-10-13 06:43:28 +00:00			`bin/uf2conv.py .pio/build/lora-relay-v2/firmware.hex -f 0xADA52840`
Generate UF2 files for NRF52 release builds 2020-08-17 19:29:45 +00:00			`# cp flash.uf2 /media/kevinh/FTH*BOOT/`