firmware/variants/rpipicow/platformio.ini

[env:picow]
extends = rp2040_base
board = rpipicow
upload_protocol = picotool

# add our variants files to the include and src paths
build_flags = ${rp2040_base.build_flags} 
  -DRPI_PICO
  -Ivariants/rpipicow
  -DHW_SPI1_DEVICE
  -L "${platformio.libdeps_dir}/${this.__env__}/bsec2/src/cortex-m0plus"
  -fexceptions  # for exception handling in MQTT
build_src_filter = ${rp2040_base.build_src_filter} +<mesh/wifi/>
lib_deps =
  ${rp2040_base.lib_deps}
  ${networking_base.lib_deps}
debug_build_flags = ${rp2040_base.build_flags}, -g
debug_tool = cmsis-dap ; for e.g. Picotool
update Raspberry Pico Framework 2022-10-13 11:57:17 +00:00			`[env:picow]`
Raspberry Pi Pico target (with sparkfun lora hat) does compile but needs further work. Also contains a small fix to make PRIVATE_HW targets build again for nRF52 architectures 2022-08-08 21:11:19 +00:00			`extends = rp2040_base`
update Raspberry Pico Framework 2022-10-13 11:57:17 +00:00			`board = rpipicow`
Raspberry Pi Pico target (with sparkfun lora hat) does compile but needs further work. Also contains a small fix to make PRIVATE_HW targets build again for nRF52 architectures 2022-08-08 21:11:19 +00:00			`upload_protocol = picotool`

			`# add our variants files to the include and src paths`
			`build_flags = ${rp2040_base.build_flags}`
RP2040: Enable telemetry and update HW models (#2525) 2023-05-28 15:30:54 +00:00			`-DRPI_PICO`
update Raspberry Pico Framework 2022-10-13 11:57:17 +00:00			`-Ivariants/rpipicow`
RAK11310 (#2299) * POC. Board definition JSON upcoming. Generic for now * side-effect: RP2040 is building again. * WIP Pico Targets * current state of affairs * ahem * POC. Board definition JSON upcoming. Generic for now * side-effect: RP2040 is building again. * WIP Pico Targets * current state of affairs * ahem * fmt * update toolkit and fmt * Add built in LED pin * Use arduino pins * init SPI bus on right pins. * Use SPI1 and control chip select manually * Use macro define for SPI selection. This needs to be defined in the ini file since portduino needs it inside the framework source * Remove manual CS; works when not using setCS() * Remove whoopsie debug line * we are not ARDUINO_AVR_NANO_EVERY any more * fix rp2040 compilation * fix RadioLibHAL * Use new arduino-pico core * Use cortex-m0plus for BSEC2 library * Forgot RAK11310 target for BSEC2 library * That branch was merged * RAK11310 is working too --------- Co-authored-by: Ben Meadors <benmmeadors@gmail.com> Co-authored-by: GUVWAF <thijs@havinga.eu> 2023-05-23 21:19:36 +00:00			`-DHW_SPI1_DEVICE`
fix include path 2024-05-16 13:08:59 +00:00			`-L "${platformio.libdeps_dir}/${this.__env__}/bsec2/src/cortex-m0plus"`
Pico W: Initial Wi-Fi support (#2980) * Pico W: Initial WiFi support: connects, but freezes after a while * Update arduino-pico core to fix hang with Wi-Fi * Add `picow` to workflow since it's different from `pico` now 2023-12-02 20:47:52 +00:00			`-fexceptions # for exception handling in MQTT`
			`build_src_filter = ${rp2040_base.build_src_filter} +<mesh/wifi/>`
Raspberry Pi Pico target (with sparkfun lora hat) does compile but needs further work. Also contains a small fix to make PRIVATE_HW targets build again for nRF52 architectures 2022-08-08 21:11:19 +00:00			`lib_deps =`
Pico W: Initial Wi-Fi support (#2980) * Pico W: Initial WiFi support: connects, but freezes after a while * Update arduino-pico core to fix hang with Wi-Fi * Add `picow` to workflow since it's different from `pico` now 2023-12-02 20:47:52 +00:00			`${rp2040_base.lib_deps}`
Fix: return failure when PhoneAPI times out (#3136) * Add debug options for RP2040 * Rename: "observed" should be plural: "observables" * PhoneAPI: return failure on timeout In `onNotify()`, when disconnected, PhoneAPI removed itself from the list of observers that was looped through in `notifyObservers()`. We should exit that loop in that case. 2024-01-28 13:53:39 +00:00			`${networking_base.lib_deps}`
RP2040: Update core; add mDNS support (#5355) * Update arduino-pico core * RP2040: Add mDNS support * SimpleMDNS `begin` now returns a bool * Add `-g` option to `debug_build_flags` to link files for gdb * RAK11310 needs old platform as well * Change defines to specific architecture * Core version 4.2.1 is out 2024-11-16 00:20:20 +00:00			`debug_build_flags = ${rp2040_base.build_flags}, -g`
Fix: return failure when PhoneAPI times out (#3136) * Add debug options for RP2040 * Rename: "observed" should be plural: "observables" * PhoneAPI: return failure on timeout In `onNotify()`, when disconnected, PhoneAPI removed itself from the list of observers that was looped through in `notifyObservers()`. We should exit that loop in that case. 2024-01-28 13:53:39 +00:00			`debug_tool = cmsis-dap ; for e.g. Picotool`