firmware/src/mesh/generated/channel.pb.h

/* Automatically generated nanopb header */
/* Generated by nanopb-0.4.7 */

#ifndef PB_CHANNEL_PB_H_INCLUDED
#define PB_CHANNEL_PB_H_INCLUDED
#include <pb.h>

#if PB_PROTO_HEADER_VERSION != 40
#error Regenerate this file with the current version of nanopb generator.
#endif

/* Enum definitions */
/* How this channel is being used (or not).
 Note: this field is an enum to give us options for the future.
 In particular, someday we might make a 'SCANNING' option.
 SCANNING channels could have different frequencies and the radio would
 occasionally check that freq to see if anything is being transmitted.
 For devices that have multiple physical radios attached, we could keep multiple PRIMARY/SCANNING channels active at once to allow
 cross band routing as needed.
 If a device has only a single radio (the common case) only one channel can be PRIMARY at a time
 (but any number of SECONDARY channels can't be sent received on that common frequency) */
typedef enum _Channel_Role {
    /* This channel is not in use right now */
    Channel_Role_DISABLED = 0,
    /* This channel is used to set the frequency for the radio - all other enabled channels must be SECONDARY */
    Channel_Role_PRIMARY = 1,
    /* Secondary channels are only used for encryption/decryption/authentication purposes.
 Their radio settings (freq etc) are ignored, only psk is used. */
    Channel_Role_SECONDARY = 2
} Channel_Role;

/* Struct definitions */
typedef PB_BYTES_ARRAY_T(32) ChannelSettings_psk_t;
/* Full settings (center freq, spread factor, pre-shared secret key etc...)
 needed to configure a radio for speaking on a particular channel This
 information can be encoded as a QRcode/url so that other users can configure
 their radio to join the same channel.
 A note about how channel names are shown to users: channelname-Xy
 poundsymbol is a prefix used to indicate this is a channel name (idea from @professr).
 Where X is a letter from A-Z (base 26) representing a hash of the PSK for this
 channel - so that if the user changes anything about the channel (which does
 force a new PSK) this letter will also change. Thus preventing user confusion if
 two friends try to type in a channel name of "BobsChan" and then can't talk
 because their PSKs will be different.
 The PSK is hashed into this letter by "0x41 + [xor all bytes of the psk ] modulo 26"
 This also allows the option of someday if people have the PSK off (zero), the
 users COULD type in a channel name and be able to talk.
 Y is a lower case letter from a-z that represents the channel 'speed' settings
 (for some future definition of speed)
 FIXME: Add description of multi-channel support and how primary vs secondary channels are used.
 FIXME: explain how apps use channels for security.
 explain how remote settings and remote gpio are managed as an example */
typedef struct _ChannelSettings {
    /* Deprecated in favor of LoraConfig.channel_num */
    uint32_t channel_num;
    /* A simple pre-shared key for now for crypto.
 Must be either 0 bytes (no crypto), 16 bytes (AES128), or 32 bytes (AES256).
 A special shorthand is used for 1 byte long psks.
 These psks should be treated as only minimally secure,
 because they are listed in this source code.
 Those bytes are mapped using the following scheme:
 `0` = No crypto
 `1` = The special "default" channel key: {0xd4, 0xf1, 0xbb, 0x3a, 0x20, 0x29, 0x07, 0x59, 0xf0, 0xbc, 0xff, 0xab, 0xcf, 0x4e, 0x69, 0xbf}
 `2` through 10 = The default channel key, except with 1 through 9 added to the last byte.
 Shown to user as simple1 through 10 */
    ChannelSettings_psk_t psk;
    /* A SHORT name that will be packed into the URL.
 Less than 12 bytes.
 Something for end users to call the channel
 If this is the empty string it is assumed that this channel
 is the special (minimally secure) "Default"channel.
 In user interfaces it should be rendered as a local language translation of "X".
 For channel_num hashing empty string will be treated as "X".
 Where "X" is selected based on the English words listed above for ModemPreset */
    char name[12];
    /* Used to construct a globally unique channel ID.
 The full globally unique ID will be: "name.id" where ID is shown as base36.
 Assuming that the number of meshtastic users is below 20K (true for a long time)
 the chance of this 64 bit random number colliding with anyone else is super low.
 And the penalty for collision is low as well, it just means that anyone trying to decrypt channel messages might need to
 try multiple candidate channels.
 Any time a non wire compatible change is made to a channel, this field should be regenerated.
 There are a small number of 'special' globally known (and fairly) insecure standard channels.
 Those channels do not have a numeric id included in the settings, but instead it is pulled from
 a table of well known IDs.
 (see Well Known Channels FIXME) */
    uint32_t id;
    /* If true, messages on the mesh will be sent to the *public* internet by any gateway ndoe */
    bool uplink_enabled;
    /* If true, messages seen on the internet will be forwarded to the local mesh. */
    bool downlink_enabled;
} ChannelSettings;

/* A pair of a channel number, mode and the (sharable) settings for that channel */
typedef struct _Channel {
    /* The index of this channel in the channel table (from 0 to MAX_NUM_CHANNELS-1)
 (Someday - not currently implemented) An index of -1 could be used to mean "set by name",
 in which case the target node will find and set the channel by settings.name. */
    int8_t index;
    /* The new settings, or NULL to disable that channel */
    bool has_settings;
    ChannelSettings settings;
    /* TODO: REPLACE */
    Channel_Role role;
} Channel;


#ifdef __cplusplus
extern "C" {
#endif

/* Helper constants for enums */
#define _Channel_Role_MIN Channel_Role_DISABLED
#define _Channel_Role_MAX Channel_Role_SECONDARY
#define _Channel_Role_ARRAYSIZE ((Channel_Role)(Channel_Role_SECONDARY+1))


#define Channel_role_ENUMTYPE Channel_Role


/* Initializer values for message structs */
#define ChannelSettings_init_default             {0, {0, {0}}, "", 0, 0, 0}
#define Channel_init_default                     {0, false, ChannelSettings_init_default, _Channel_Role_MIN}
#define ChannelSettings_init_zero                {0, {0, {0}}, "", 0, 0, 0}
#define Channel_init_zero                        {0, false, ChannelSettings_init_zero, _Channel_Role_MIN}

/* Field tags (for use in manual encoding/decoding) */
#define ChannelSettings_channel_num_tag          1
#define ChannelSettings_psk_tag                  2
#define ChannelSettings_name_tag                 3
#define ChannelSettings_id_tag                   4
#define ChannelSettings_uplink_enabled_tag       5
#define ChannelSettings_downlink_enabled_tag     6
#define Channel_index_tag                        1
#define Channel_settings_tag                     2
#define Channel_role_tag                         3

/* Struct field encoding specification for nanopb */
#define ChannelSettings_FIELDLIST(X, a) \
X(a, STATIC,   SINGULAR, UINT32,   channel_num,       1) \
X(a, STATIC,   SINGULAR, BYTES,    psk,               2) \
X(a, STATIC,   SINGULAR, STRING,   name,              3) \
X(a, STATIC,   SINGULAR, FIXED32,  id,                4) \
X(a, STATIC,   SINGULAR, BOOL,     uplink_enabled,    5) \
X(a, STATIC,   SINGULAR, BOOL,     downlink_enabled,   6)
#define ChannelSettings_CALLBACK NULL
#define ChannelSettings_DEFAULT NULL

#define Channel_FIELDLIST(X, a) \
X(a, STATIC,   SINGULAR, INT32,    index,             1) \
X(a, STATIC,   OPTIONAL, MESSAGE,  settings,          2) \
X(a, STATIC,   SINGULAR, UENUM,    role,              3)
#define Channel_CALLBACK NULL
#define Channel_DEFAULT NULL
#define Channel_settings_MSGTYPE ChannelSettings

extern const pb_msgdesc_t ChannelSettings_msg;
extern const pb_msgdesc_t Channel_msg;

/* Defines for backwards compatibility with code written before nanopb-0.4.0 */
#define ChannelSettings_fields &ChannelSettings_msg
#define Channel_fields &Channel_msg

/* Maximum encoded size of messages (where known) */
#define ChannelSettings_size                     62
#define Channel_size                             77

#ifdef __cplusplus
} /* extern "C" */
#endif

#endif