firmware/src/input/BBQ10Keyboard.cpp

// Based on arturo182 arduino_bbq10kbd library https://github.com/arturo182/arduino_bbq10kbd

#include <Arduino.h>

#include "BBQ10Keyboard.h"

#define _REG_VER 1
#define _REG_CFG 2
#define _REG_INT 3
#define _REG_KEY 4
#define _REG_BKL 5
#define _REG_DEB 6
#define _REG_FRQ 7
#define _REG_RST 8
#define _REG_FIF 9

#define _WRITE_MASK (1 << 7)

#define CFG_OVERFLOW_ON (1 << 0)
#define CFG_OVERFLOW_INT (1 << 1)
#define CFG_CAPSLOCK_INT (1 << 2)
#define CFG_NUMLOCK_INT (1 << 3)
#define CFG_KEY_INT (1 << 4)
#define CFG_PANIC_INT (1 << 5)

#define INT_OVERFLOW (1 << 0)
#define INT_CAPSLOCK (1 << 1)
#define INT_NUMLOCK (1 << 2)
#define INT_KEY (1 << 3)
#define INT_PANIC (1 << 4)

#define KEY_CAPSLOCK (1 << 5)
#define KEY_NUMLOCK (1 << 6)
#define KEY_COUNT_MASK (0x1F)

BBQ10Keyboard::BBQ10Keyboard() : m_wire(nullptr), m_addr(NULL), writeCallback(nullptr), readCallback(nullptr) {}

void BBQ10Keyboard::begin(uint8_t addr, TwoWire *wire)
{
    m_addr = addr;
    m_wire = wire;

    m_wire->begin();

    reset();
}

void BBQ10Keyboard::begin(i2c_com_fptr_t r, i2c_com_fptr_t w, uint8_t addr)
{
    m_addr = addr;
    m_wire = nullptr;
    writeCallback = w;
    readCallback = r;
    reset();
}

void BBQ10Keyboard::reset()
{
    if (m_wire) {
        m_wire->beginTransmission(m_addr);
        m_wire->write(_REG_RST);
        m_wire->endTransmission();
    }
    if (writeCallback) {
        uint8_t data = 0;
        writeCallback(m_addr, _REG_RST, &data, 0);
    }
    delay(100);
}

void BBQ10Keyboard::attachInterrupt(uint8_t pin, void (*func)(void)) const
{
    pinMode(pin, INPUT_PULLUP);
    ::attachInterrupt(digitalPinToInterrupt(pin), func, RISING);
}

void BBQ10Keyboard::detachInterrupt(uint8_t pin) const
{
    ::detachInterrupt(pin);
}

void BBQ10Keyboard::clearInterruptStatus()
{
    writeRegister(_REG_INT, 0x00);
}

uint8_t BBQ10Keyboard::status() const
{
    return readRegister8(_REG_KEY);
}

uint8_t BBQ10Keyboard::keyCount() const
{
    return status() & KEY_COUNT_MASK;
}

BBQ10Keyboard::KeyEvent BBQ10Keyboard::keyEvent() const
{
    KeyEvent event = {.key = '\0', .state = StateIdle};

    if (keyCount() == 0)
        return event;

    const uint16_t buf = readRegister16(_REG_FIF);
    event.key = buf >> 8;
    event.state = KeyState(buf & 0xFF);

    return event;
}

float BBQ10Keyboard::backlight() const
{
    return readRegister8(_REG_BKL) / 255.0f;
}

void BBQ10Keyboard::setBacklight(float value)
{
    writeRegister(_REG_BKL, value * 255);
}

uint8_t BBQ10Keyboard::readRegister8(uint8_t reg) const
{
    if (m_wire) {
        m_wire->beginTransmission(m_addr);
        m_wire->write(reg);
        m_wire->endTransmission();

        m_wire->requestFrom(m_addr, (uint8_t)1);
        if (m_wire->available() < 1)
            return 0;

        return m_wire->read();
    }
    if (readCallback) {
        uint8_t data;
        readCallback(m_addr, reg, &data, 1);
        return data;
    }
    return 0;
}

uint16_t BBQ10Keyboard::readRegister16(uint8_t reg) const
{
    uint8_t data[2] = {0};
    // uint8_t low = 0, high = 0;
    if (m_wire) {
        m_wire->beginTransmission(m_addr);
        m_wire->write(reg);
        m_wire->endTransmission();

        m_wire->requestFrom(m_addr, (uint8_t)2);
        if (m_wire->available() < 2)
            return 0;
        data[0] = m_wire->read();
        data[1] = m_wire->read();
    }
    if (readCallback) {
        readCallback(m_addr, reg, data, 2);
    }
    return (data[1] << 8) | data[0];
}

void BBQ10Keyboard::writeRegister(uint8_t reg, uint8_t value)
{
    uint8_t data[2];
    data[0] = reg | _WRITE_MASK;
    data[1] = value;

    if (m_wire) {
        m_wire->beginTransmission(m_addr);
        m_wire->write(data, sizeof(uint8_t) * 2);
        m_wire->endTransmission();
    }
    if (writeCallback) {
        writeCallback(m_addr, data[0], &(data[1]), 1);
    }
}