manual merge of changes from Master

src/main.cpp

@@ -37,7 +37,7 @@
 #include "nimble/NimbleBluetooth.h"
 #endif
 
-#if HAS_WIFI || defined(ARCH_PORTDUINO)
+#if HAS_WIFI
 #include "mesh/wifi/WiFiServerAPI.h"
 #include "mqtt/MQTT.h"
 #endif
@@ -293,6 +293,10 @@ void setup()
     * Boards with an PMU need to be powered on to correctly scan to the device address, such as t-beam-s3-core
     */
     scanI2Cdevice();
+
+    // fixed screen override?
+    if (config.display.oled != Config_DisplayConfig_OledType_OLED_AUTO)
+        screen_model = config.display.oled;
     
     // Init our SPI controller (must be before screen and lora)
     initSPI();

src/mesh/FloodingRouter.cpp

@@ -29,8 +29,8 @@ bool FloodingRouter::shouldFilterReceived(MeshPacket *p)
 
 void FloodingRouter::sniffReceived(const MeshPacket *p, const Routing *c)
 {
-    PacketId ackId = ((c && c->error_reason == Routing_Error_NONE) || !c) ? p->decoded.request_id : 0;
+    bool isAck = ((c && c->error_reason == Routing_Error_NONE)); // consider only ROUTING_APP message without error as ACK
-    if (ackId && p->to != getNodeNum()) {
+    if (isAck && p->to != getNodeNum()) {
         // do not flood direct message that is ACKed 
         DEBUG_MSG("Receiving an ACK not for me, but don't need to rebroadcast this direct message anymore.\n");
         Router::cancelSending(p->to, p->decoded.request_id);   // cancel rebroadcast for this DM

src/modules/ExternalNotificationModule.cpp

@@ -116,9 +116,6 @@ ExternalNotificationModule::ExternalNotificationModule()
     : SinglePortModule("ExternalNotificationModule", PortNum_TEXT_MESSAGE_APP), concurrency::OSThread(
                                                                                     "ExternalNotificationModule")
 {
-    // restrict to the admin channel for rx
-    boundChannel = Channels::gpioChannel;
-
     /*
         Uncomment the preferences below if you want to use the module
         without having to configure it from the PythonAPI or WebUI.
@@ -131,6 +128,11 @@ ExternalNotificationModule::ExternalNotificationModule()
     // moduleConfig.external_notification.alert_bell = 1;
     // moduleConfig.external_notification.output_ms = 1000;
     // moduleConfig.external_notification.output = 13;
+    
+    if (moduleConfig.external_notification.alert_message) {
+        // restrict to the gpio channel for rx
+        boundChannel = Channels::gpioChannel;
+    }
 
     if (moduleConfig.external_notification.enabled) {
 

variants/feather_diy/platformio.ini

@@ -2,7 +2,7 @@
 [env:feather_diy]
 extends = nrf52840_base
 board = adafruit_feather_nrf52840
-build_flags = ${nrf52840_base.build_flags} -Ivariants/feather_diy -D feather_diy
+build_flags = ${nrf52840_base.build_flags} -Ivariants/feather_diy -Dfeather_diy
 build_src_filter = ${nrf52_base.build_src_filter} +<../variants/feather_diy>
 lib_deps = 
   ${nrf52840_base.lib_deps}

variants/feather_diy/variant.cpp

@@ -0,0 +1,24 @@
+/*
+  Copyright (c) 2014-2015 Arduino LLC.  All right reserved.
+  Copyright (c) 2016 Sandeep Mistry All right reserved.
+  Copyright (c) 2018, Adafruit Industries (adafruit.com)
+
+  This library is free software; you can redistribute it and/or
+  modify it under the terms of the GNU Lesser General Public
+  License as published by the Free Software Foundation; either
+  version 2.1 of the License, or (at your option) any later version.
+
+  This library is distributed in the hope that it will be useful,
+  but WITHOUT ANY WARRANTY; without even the implied warranty of
+  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+  See the GNU Lesser General Public License for more details.
+
+  You should have received a copy of the GNU Lesser General Public
+  License along with this library; if not, write to the Free Software
+  Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+*/
+
+#include "variant.h"
+#include "nrf.h"
+#include "wiring_constants.h"
+#include "wiring_digital.h"

variants/feather_diy/variant.h

@@ -1,19 +1,95 @@
-// For OLED LCD
+/*
-#define I2C_SDA 22
+  Copyright (c) 2014-2015 Arduino LLC.  All right reserved.
-#define I2C_SCL 23
+  Copyright (c) 2016 Sandeep Mistry All right reserved.
+  Copyright (c) 2018, Adafruit Industries (adafruit.com)
 
-#define BUTTON_PIN 7
+  This library is free software; you can redistribute it and/or
+  modify it under the terms of the GNU Lesser General Public
+  License as published by the Free Software Foundation; either
+  version 2.1 of the License, or (at your option) any later version.
+  This library is distributed in the hope that it will be useful,
+  but WITHOUT ANY WARRANTY; without even the implied warranty of
+  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+  See the GNU Lesser General Public License for more details.
+  You should have received a copy of the GNU Lesser General Public
+  License along with this library; if not, write to the Free Software
+  Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+*/
+
+#ifndef _VARIANT_FEATHER_DIY_
+#define _VARIANT_FEATHER_DIY_
+
+/** Master clock frequency */
+#define VARIANT_MCK (64000000ul)
+
+#define USE_LFXO // Board uses 32khz crystal for LF
+// define USE_LFRC    // Board uses RC for LF
+
+/*----------------------------------------------------------------------------
+ *        Headers
+ *----------------------------------------------------------------------------*/
+
+#include "WVariant.h"
+
+#ifdef __cplusplus
+extern "C" {
+#endif // __cplusplus
+
+// Number of pins defined in PinDescription array
+#define PINS_COUNT (48)
+#define NUM_DIGITAL_PINS (48)
+#define NUM_ANALOG_INPUTS (6)
+#define NUM_ANALOG_OUTPUTS (0)
+
+#define WIRE_INTERFACES_COUNT 1
+
+#define PIN_WIRE_SDA (0 + 12) //P0.12 22
+#define PIN_WIRE_SCL (0 + 11) //P0.12 23
+
+#define PIN_LED1 (32 + 15) //P1.15 3
+#define PIN_LED2 (32 + 10) //P1.10 4
+
+#define LED_BUILTIN PIN_LED1
+
+#define LED_GREEN PIN_LED2 // Actually red
+#define LED_BLUE PIN_LED1
+
+#define LED_STATE_ON 1 // State when LED is litted
+
+#define BUTTON_PIN (32 + 2) //P1.02 7
+
+/*
+ * Serial interfaces
+ */
+#define PIN_SERIAL1_RX (0 + 24)  //P0.24 1
+#define PIN_SERIAL1_TX (0 + 25)  //P0.25 0
+
+#define PIN_SERIAL2_RX (-1)
+#define PIN_SERIAL2_TX (-1)
+
+#define SPI_INTERFACES_COUNT 1
+
+#define PIN_SPI_MISO (0 + 15)  //P0.15 24
+#define PIN_SPI_MOSI (0 + 13)  //P0.13 25
+#define PIN_SPI_SCK  (0 + 14)  //P0.14 26
+
+#define SS 2
 
 #define LORA_DIO0 -1  // a No connect on the SX1262/SX1268 module
-#define LORA_RESET 13 // RST for SX1276, and for SX1262/SX1268
+#define LORA_RESET    (32 + 9) //P1.09 13 // RST for SX1276, and for SX1262/SX1268
-#define LORA_DIO1 11  // IRQ for SX1262/SX1268
+#define LORA_DIO1     (0 + 6)  //P0.06 11  // IRQ for SX1262/SX1268
-#define LORA_DIO2 12  // BUSY for SX1262/SX1268
+#define LORA_DIO2     (0 + 8)  //P0.08 12  // BUSY for SX1262/SX1268
 #define LORA_DIO3     // Not connected on PCB, but internally on the TTGO SX1262/SX1268, if DIO3 is high the TXCO is enabled
 
 #define RF95_SCK SCK
 #define RF95_MISO MI
 #define RF95_MOSI MO
-#define RF95_NSS D2
+#define RF95_NSS SS
+
+// enables 3.3V periphery like GPS or IO Module
+#define PIN_3V3_EN (-1)
+
+#undef USE_EINK
 
 // supported modules list
 #define USE_SX1262
@@ -23,11 +99,21 @@
 #define SX126X_DIO1 LORA_DIO1
 #define SX126X_BUSY LORA_DIO2
 #define SX126X_RESET LORA_RESET
-#define SX126X_RXEN 10
+#define SX126X_RXEN (0 + 27) //P0.27 10
-#define SX126X_TXEN 9
+#define SX126X_TXEN (0 + 26) //P0.26 9
 
 #ifdef EBYTE_E22
 // Internally the TTGO module hooks the SX126x-DIO2 in to control the TX/RX switch
 // (which is the default for the sx1262interface code)
 #define SX126X_E22
 #endif
+
+#ifdef __cplusplus
+}
+#endif
+
+/*----------------------------------------------------------------------------
+ *        Arduino objects - C++ only
+ *----------------------------------------------------------------------------*/
+
+#endif