Merge branch 'meshtastic:master' into master

.github/workflows/build_native.yml

@@ -14,7 +14,7 @@ jobs:
         shell: bash
         run: |
           sudo apt-get update --fix-missing
-          sudo apt-get install -y libbluetooth-dev libgpiod-dev libyaml-cpp-dev openssl libssl-dev libulfius-dev liborcania-dev libusb-1.0-0-dev
+          sudo apt-get install -y libbluetooth-dev libgpiod-dev libyaml-cpp-dev openssl libssl-dev libulfius-dev liborcania-dev libusb-1.0-0-dev libi2c-dev
 
       - name: Checkout code
         uses: actions/checkout@v4

.github/workflows/build_raspbian.yml

@@ -14,7 +14,7 @@ jobs:
         shell: bash
         run: |
           sudo apt-get update -y --fix-missing
-          sudo apt-get install -y libbluetooth-dev libgpiod-dev libyaml-cpp-dev openssl libssl-dev libulfius-dev liborcania-dev libusb-1.0-0-dev
+          sudo apt-get install -y libbluetooth-dev libgpiod-dev libyaml-cpp-dev openssl libssl-dev libulfius-dev liborcania-dev libusb-1.0-0-dev libi2c-dev
 
       - name: Checkout code
         uses: actions/checkout@v4

.github/workflows/build_raspbian_armv7l.yml

@@ -14,7 +14,7 @@ jobs:
         shell: bash
         run: |
           sudo apt-get update -y --fix-missing
-          sudo apt-get install -y libbluetooth-dev libgpiod-dev libyaml-cpp-dev openssl libssl-dev libulfius-dev liborcania-dev libusb-1.0-0-dev
+          sudo apt-get install -y libbluetooth-dev libgpiod-dev libyaml-cpp-dev openssl libssl-dev libulfius-dev liborcania-dev libusb-1.0-0-dev libi2c-dev
 
       - name: Checkout code
         uses: actions/checkout@v4

.github/workflows/package_amd64.yml

@@ -79,7 +79,7 @@ jobs:
           maintainer: Jonathan Bennett
           version: ${{ steps.version.outputs.version }} # refs/tags/v*.*.*
           arch: amd64
-          depends: libyaml-cpp0.7, openssl, libulfius2.7
+          depends: libyaml-cpp0.7, openssl, libulfius2.7, libi2c0
           desc: Native Linux Meshtastic binary.
 
       - uses: actions/upload-artifact@v4

.github/workflows/package_raspbian.yml

@@ -79,7 +79,7 @@ jobs:
           maintainer: Jonathan Bennett
           version: ${{ steps.version.outputs.version }} # refs/tags/v*.*.*
           arch: arm64
-          depends: libyaml-cpp0.7, openssl, libulfius2.7
+          depends: libyaml-cpp0.7, openssl, libulfius2.7, libi2c0
           desc: Native Linux Meshtastic binary.
 
       - uses: actions/upload-artifact@v4

.github/workflows/package_raspbian_armv7l.yml

@@ -79,7 +79,7 @@ jobs:
           maintainer: Jonathan Bennett
           version: ${{ steps.version.outputs.version }} # refs/tags/v*.*.*
           arch: armhf
-          depends: libyaml-cpp0.7, openssl, libulfius2.7
+          depends: libyaml-cpp0.7, openssl, libulfius2.7, libi2c0
           desc: Native Linux Meshtastic binary.
 
       - uses: actions/upload-artifact@v4

Dockerfile

@@ -14,7 +14,7 @@ USER root
 # trunk-ignore(hadolint/DL3008): Use latest version of packages for buildchain
 RUN apt-get update && apt-get install --no-install-recommends -y wget python3 python3-pip python3-wheel python3-venv g++ zip git \
                            ca-certificates libgpiod-dev libyaml-cpp-dev libbluetooth-dev \
-                           libulfius-dev liborcania-dev libssl-dev pkg-config && \
+                           libusb-1.0-0-dev libulfius-dev liborcania-dev libssl-dev pkg-config && \
     apt-get clean && rm -rf /var/lib/apt/lists/* && mkdir /tmp/firmware
 
 RUN groupadd -g 1000 mesh && useradd -ml -u 1000 -g 1000 mesh && chown mesh:mesh /tmp/firmware
@@ -37,7 +37,7 @@ ENV TZ=Etc/UTC
 
 # trunk-ignore(terrascan/AC_DOCKER_0002): Known terrascan issue
 # trunk-ignore(hadolint/DL3008): Use latest version of packages for buildchain
-RUN apt-get update && apt-get --no-install-recommends -y install libc-bin libc6 libgpiod2 libyaml-cpp0.7 libulfius2.7 liborcania2.3 libssl3 && \
+RUN apt-get update && apt-get --no-install-recommends -y install libc-bin libc6 libgpiod2 libyaml-cpp0.7 libulfius2.7 libusb-1.0-0-dev liborcania2.3 libssl3 && \
     apt-get clean && rm -rf /var/lib/apt/lists/*
 
 RUN groupadd -g 1000 mesh && useradd -ml -u 1000 -g 1000 mesh

arch/portduino/portduino.ini

@@ -1,6 +1,6 @@
 ; The Portduino based 'native' environment. Currently supported on Linux targets with real LoRa hardware (or simulated).
 [portduino_base]
-platform = https://github.com/meshtastic/platform-native.git#73bd1a21183ca8b00c4ea58bb21315df31a50dff
+platform = https://github.com/meshtastic/platform-native.git#562d189828f09fbf4c4093b3c0104bae9d8e9ff9
 framework = arduino
 
 build_src_filter = 
@@ -34,7 +34,10 @@ build_flags =
   -Isrc/platform/portduino
   -DRADIOLIB_EEPROM_UNSUPPORTED
   -DPORTDUINO_LINUX_HARDWARE
+  -lpthread
   -lstdc++fs
   -lbluetooth
   -lgpiod
   -lyaml-cpp
+  -li2c
+  -std=c++17

bin/config.d/femtofox/femtofox_EByte-E22-900M30S_Ebyte-E22-900M22S.yaml

@@ -1,16 +0,0 @@
----
-Lora:
-## Ebyte E22-900M30S, E22-900M22S with no external RF switching setup
-## Will work with any module without RF switching, and with TCXO
-  Module: sx1262
-  gpiochip: 1 # subtract 32 from the gpio numbers
-  DIO2_AS_RF_SWITCH: true
-  DIO3_TCXO_VOLTAGE: true
-  CS: 16 #pin6 / GPIO48 1C0
-  IRQ: 23  #pin17 / GPIO55 1C7
-  Busy: 22 #pin16 / GPIO54 1C6
-  Reset: 25 #pin13 / GPIO57 1D1
-  RXen: 24 #pin12 / GPIO56 1D0
-  #TXen: bridge to DIO2 on E22 module
-  spidev: spidev0.0
-  spiSpeed: 2000000

bin/config.d/femtofox/femtofox_EByte-E22-900MM22S.yaml

@@ -1,16 +0,0 @@
----
-Lora:
-## Ebyte E22-900MM22S with no external RF switching setup
-## Will work with any module without RF switching and no TCXO
-  Module: sx1262  
-  gpiochip: 1 # subtract 32 from the gpio numbers
-  DIO2_AS_RF_SWITCH: true
-  DIO3_TCXO_VOLTAGE: true
-  CS: 16 #pin6 / GPIO48 1C0
-  IRQ: 23  #pin17 / GPIO55 1C7
-  Busy: 22 #pin16 / GPIO54 1C6
-  Reset: 25 #pin13 / GPIO57 1D1 
-  RXen: 24 #pin12 / GPIO56 1D0
-  #TXen: bridge to DIO2 on E22 module
-  spidev: spidev0.0
-  spiSpeed: 2000000

bin/config.d/femtofox/femtofox_Heltec-HT-RA62_Seeed-WIO-SX1262.yaml

@@ -1,14 +0,0 @@
----
-Lora:
-## Heltec HT-RA62, Seeed WIO SX1262
-## Will work with any module with automatic RF switching, and with TCXO
-  Module: sx1262
-  gpiochip: 1 # subtract 32 from the gpio numbers
-  DIO2_AS_RF_SWITCH: true
-  DIO3_TCXO_VOLTAGE: true
-  CS: 16 #pin6 (GPIO pin 48 1C0)
-  IRQ: 23  #pin17 (GPIO pin 55 1C7)
-  Reset: 25 #pin13 (GPIO pin 57 1D1)
-  Busy: 22 #pin16 (GPIO pin 54 1C6)
-  spidev: spidev0.0 #pins are (CS=6, CLK=7, MOSI=8, MISO=9)
-  spiSpeed: 2000000

bin/config.d/femtofox/femtofox_LR1121_TCXO.yaml

@@ -0,0 +1,20 @@
+---
+Lora:
+## Ebyte E80-900M22S
+## This is a bit experimental
+## 
+##
+  Module: lr1121
+  gpiochip: 1 # subtract 32 from the gpio numbers
+  DIO3_TCXO_VOLTAGE: 1.8
+  CS: 16 #pin6 / GPIO48 1C0
+  IRQ: 23  #pin17 / GPIO55 1C7
+  Busy: 22 #pin16 / GPIO54 1C6
+  Reset: 25 #pin13 / GPIO57 1D1
+
+
+  spidev: spidev0.0 #pins are (CS=16, CLK=17, MOSI=18, MISO=19)
+  spiSpeed: 2000000
+  
+General:
+  MACAddressSource: eth0

bin/config.d/femtofox/femtofox_SX1262_TCXO.yaml

@@ -0,0 +1,21 @@
+---
+Lora:
+## Ebyte E22-900M30S, E22-900M22S with or without external RF switching setup
+## HT-RA62 (Has internal switching, but whatever)
+## Seeed WIO SX1262 (already has TXEN-DIO2 link, but needs RXEN)
+## Will work with any module with or without RF switching, and with TCXO
+  Module: sx1262
+  gpiochip: 1 # subtract 32 from the gpio numbers
+  DIO2_AS_RF_SWITCH: true
+  DIO3_TCXO_VOLTAGE: true
+  CS: 16 #pin6 / GPIO48 1C0
+  IRQ: 23  #pin17 / GPIO55 1C7
+  Busy: 22 #pin16 / GPIO54 1C6
+  Reset: 25 #pin13 / GPIO57 1D1
+  RXen: 24 #pin12 / GPIO56 1D0 # Not strictly needed for auto-switching, but why complicate things?
+#  TXen: bridge to DIO2 on E22 module
+  spidev: spidev0.0 #pins are (CS=16, CLK=17, MOSI=18, MISO=19)
+  spiSpeed: 2000000
+  
+General:
+  MACAddressSource: eth0

bin/config.d/femtofox/femtofox_SX1262_XTAL.yaml

@@ -0,0 +1,21 @@
+---
+Lora:
+## Ebyte E22-900MM22S with no external RF switching setup
+## Waveshare SX126X XXXM, AI Thinker RA-01SH
+## Will work with any module with or without RF switching and no TCXO
+
+  Module: sx1262  
+  gpiochip: 1 # subtract 32 from the gpio numbers
+  DIO2_AS_RF_SWITCH: true
+  DIO3_TCXO_VOLTAGE: false
+  CS: 16 #pin6 / GPIO48 1C0
+  IRQ: 23  #pin17 / GPIO55 1C7
+  Busy: 22 #pin16 / GPIO54 1C6
+  Reset: 25 #pin13 / GPIO57 1D1 
+  RXen: 24 #pin12 / GPIO56 1D0 # Not strictly needed for auto-switching, but why complicate things?
+#  TXen: bridge to DIO2 on E22 module
+  spidev: spidev0.0 #pins are (CS=16, CLK=17, MOSI=18, MISO=19)
+  spiSpeed: 2000000
+
+General:
+  MACAddressSource: eth0

bin/config.d/femtofox/femtofox_Waveshare-SX126X-XXXM_AI-Thinker-RA-01SH.yaml

@@ -1,13 +0,0 @@
----
-Lora:
-## Waveshare SX126X XXXM, AI Thinker RA-01SH
-## Will work with any module with automatic RF switching, and with no TCXO
-  Module: sx1262  
-  gpiochip: 1 # subtract 32 from the gpio numbers
-  DIO2_AS_RF_SWITCH: true
-  CS: 16 #pin6 (GPIO pin 48 1C0)
-  IRQ: 23  #pin17 (GPIO pin 55 1C7)
-  Reset: 25 #pin13 (GPIO pin 57 1D1)
-  Busy: 22 #pin16 (GPIO pin 54 1C6)
-  spidev: spidev0.0 #pins are (CS=6, CLK=7, MOSI=8, MISO=9)
-  spiSpeed: 2000000

boards/esp32-s3-zero.json

@@ -0,0 +1,41 @@
+{
+  "build": {
+    "arduino": {
+      "partitions": "default.csv",
+      "memory_type": "qio_qspi"
+    },
+    "core": "esp32",
+    "extra_flags": [
+      "-DARDUINO_ESP32S3_DEV",
+      "-DARDUINO_RUNNING_CORE=1",
+      "-DARDUINO_EVENT_RUNNING_CORE=1",
+      "-DARDUINO_USB_CDC_ON_BOOT=1",
+      "-DBOARD_HAS_PSRAM"
+    ],
+    "f_cpu": "240000000L",
+    "f_flash": "80000000L",
+    "flash_mode": "qio",
+    "psram_type": "qio",
+    "hwids": [["0x303A", "0x1001"]],
+    "mcu": "esp32s3",
+    "variant": "esp32s3"
+  },
+  "connectivity": ["wifi", "bluetooth"],
+  "debug": {
+    "default_tool": "esp-builtin",
+    "onboard_tools": ["esp-builtin"],
+    "openocd_target": "esp32s3.cfg"
+  },
+  "frameworks": ["arduino", "espidf"],
+  "platforms": ["espressif32"],
+  "name": "Espressif ESP32-S3-FH4R2 (4 MB QD, 2MB PSRAM)",
+  "upload": {
+    "flash_size": "4MB",
+    "maximum_ram_size": 327680,
+    "maximum_size": 4194304,
+    "require_upload_port": true,
+    "speed": 921600
+  },
+  "url": "https://docs.espressif.com/projects/esp-idf/en/latest/esp32s3/hw-reference/esp32s3/user-guide-devkitc-1.html",
+  "vendor": "Espressif"
+}

platformio.ini

@@ -161,3 +161,4 @@ lib_deps =
 	mprograms/QMC5883LCompass@1.2.3
 	dfrobot/DFRobot_RTU@1.0.3
 	https://github.com/meshtastic/DFRobot_LarkWeatherStation#4de3a9cadef0f6a5220a8a906cf9775b02b0040d
+        robtillaart/INA226@0.6.0

src/Power.cpp

@@ -72,8 +72,9 @@ static const uint8_t ext_chrg_detect_value = EXT_CHRG_DETECT_VALUE;
 #endif
 
 #if HAS_TELEMETRY && !MESHTASTIC_EXCLUDE_ENVIRONMENTAL_SENSOR && !defined(ARCH_PORTDUINO)
-INA260Sensor ina260Sensor;
 INA219Sensor ina219Sensor;
+INA226Sensor ina226Sensor;
+INA260Sensor ina260Sensor;
 INA3221Sensor ina3221Sensor;
 #endif
 
@@ -413,7 +414,20 @@ class AnalogBatteryLevel : public HasBatteryLevel
 #ifdef EXT_CHRG_DETECT
         return digitalRead(EXT_CHRG_DETECT) == ext_chrg_detect_value;
 #else
+#if HAS_TELEMETRY && !MESHTASTIC_EXCLUDE_ENVIRONMENTAL_SENSOR && !defined(ARCH_PORTDUINO) && !defined(ARCH_STM32WL) &&           \
+    !defined(DISABLE_INA_CHARGING_DETECTION)
+        if (hasINA()) {
+            // get current flow from INA sensor - negative value means power flowing into the battery
+            // default assuming  BATTERY+  <--> INA_VIN+ <--> SHUNT RESISTOR <--> INA_VIN- <--> LOAD
+            LOG_DEBUG("Using INA on I2C addr 0x%x for charging detection", config.power.device_battery_ina_address);
+#if defined(INA_CHARGING_DETECTION_INVERT)
+            return getINACurrent() > 0;
+#else
+            return getINACurrent() < 0;
+#endif
+        }
         return isBatteryConnect() && isVbusIn();
+#endif
 #endif
     }
 
@@ -450,6 +464,9 @@ class AnalogBatteryLevel : public HasBatteryLevel
     {
         if (nodeTelemetrySensorsMap[meshtastic_TelemetrySensorType_INA219].first == config.power.device_battery_ina_address) {
             return ina219Sensor.getBusVoltageMv();
+        } else if (nodeTelemetrySensorsMap[meshtastic_TelemetrySensorType_INA226].first ==
+                   config.power.device_battery_ina_address) {
+            return ina226Sensor.getBusVoltageMv();
         } else if (nodeTelemetrySensorsMap[meshtastic_TelemetrySensorType_INA260].first ==
                    config.power.device_battery_ina_address) {
             return ina260Sensor.getBusVoltageMv();
@@ -460,6 +477,20 @@ class AnalogBatteryLevel : public HasBatteryLevel
         return 0;
     }
 
+    int16_t getINACurrent()
+    {
+        if (nodeTelemetrySensorsMap[meshtastic_TelemetrySensorType_INA219].first == config.power.device_battery_ina_address) {
+            return ina219Sensor.getCurrentMa();
+        } else if (nodeTelemetrySensorsMap[meshtastic_TelemetrySensorType_INA226].first ==
+                   config.power.device_battery_ina_address) {
+            return ina226Sensor.getCurrentMa();
+        } else if (nodeTelemetrySensorsMap[meshtastic_TelemetrySensorType_INA3221].first ==
+                   config.power.device_battery_ina_address) {
+            return ina3221Sensor.getCurrentMa();
+        }
+        return 0;
+    }
+
     bool hasINA()
     {
         if (!config.power.device_battery_ina_address) {
@@ -469,6 +500,10 @@ class AnalogBatteryLevel : public HasBatteryLevel
             if (!ina219Sensor.isInitialized())
                 return ina219Sensor.runOnce() > 0;
             return ina219Sensor.isRunning();
+        } else if (nodeTelemetrySensorsMap[meshtastic_TelemetrySensorType_INA226].first ==
+                   config.power.device_battery_ina_address) {
+            if (!ina226Sensor.isInitialized())
+                return ina226Sensor.runOnce() > 0;
         } else if (nodeTelemetrySensorsMap[meshtastic_TelemetrySensorType_INA260].first ==
                    config.power.device_battery_ina_address) {
             if (!ina260Sensor.isInitialized())

src/detect/ScanI2C.h

@@ -64,7 +64,8 @@ class ScanI2C
         TPS65233,
         MPR121KB,
         CGRADSENS,
-        INA226
+        INA226,
+        NXP_SE050,
     } DeviceType;
 
     // typedef uint8_t DeviceAddress;

src/detect/ScanI2CTwoWire.cpp

@@ -154,9 +154,14 @@ void ScanI2CTwoWire::scanPort(I2CPort port, uint8_t *address, uint8_t asize)
         }
         i2cBus->beginTransmission(addr.address);
 #ifdef ARCH_PORTDUINO
-        if (i2cBus->read() != -1)
-            err = 0;
-        else
+        err = 2;
+        if ((addr.address >= 0x30 && addr.address <= 0x37) || (addr.address >= 0x50 && addr.address <= 0x5F)) {
+            if (i2cBus->read() != -1)
+                err = 0;
+        } else {
+            err = i2cBus->writeQuick((uint8_t)0);
+        }
+        if (err != 0)
             err = 2;
 #else
         err = i2cBus->endTransmission();
@@ -396,7 +401,6 @@ void ScanI2CTwoWire::scanPort(I2CPort port, uint8_t *address, uint8_t asize)
                 SCAN_SIMPLE_CASE(OPT3001_ADDR, OPT3001, "OPT3001", (uint8_t)addr.address);
                 SCAN_SIMPLE_CASE(MLX90632_ADDR, MLX90632, "MLX90632", (uint8_t)addr.address);
                 SCAN_SIMPLE_CASE(NAU7802_ADDR, NAU7802, "NAU7802", (uint8_t)addr.address);
-                SCAN_SIMPLE_CASE(FT6336U_ADDR, FT6336U, "FT6336U", (uint8_t)addr.address);
                 SCAN_SIMPLE_CASE(MAX1704X_ADDR, MAX17048, "MAX17048", (uint8_t)addr.address);
 #ifdef HAS_TPS65233
                 SCAN_SIMPLE_CASE(TPS65233_ADDR, TPS65233, "TPS65233", (uint8_t)addr.address);
@@ -444,6 +448,26 @@ void ScanI2CTwoWire::scanPort(I2CPort port, uint8_t *address, uint8_t asize)
                 }
                 break;
 
+            case 0x48: {
+                i2cBus->beginTransmission(addr.address);
+                uint8_t getInfo[] = {0x5A, 0xC0, 0x00, 0xFF, 0xFC};
+                uint8_t expectedInfo[] = {0xa5, 0xE0, 0x00, 0x3F, 0x19};
+                uint8_t info[5];
+                size_t len = 0;
+                i2cBus->write(getInfo, 5);
+                i2cBus->endTransmission();
+                len = i2cBus->readBytes(info, 5);
+                if (len == 5 && memcmp(expectedInfo, info, len) == 0) {
+                    LOG_INFO("NXP SE050 crypto chip found\n");
+                    type = NXP_SE050;
+
+                } else {
+                    LOG_INFO("FT6336U touchscreen found\n");
+                    type = FT6336U;
+                }
+                break;
+            }
+
             default:
                 LOG_INFO("Device found at address 0x%x was not able to be enumerated", (uint8_t)addr.address);
             }

src/modules/Telemetry/PowerTelemetry.cpp

@@ -56,6 +56,8 @@ int32_t PowerTelemetryModule::runOnce()
             // therefore, we should only enable the sensor loop if measurement is also enabled
             if (ina219Sensor.hasSensor() && !ina219Sensor.isInitialized())
                 result = ina219Sensor.runOnce();
+            if (ina226Sensor.hasSensor() && !ina226Sensor.isInitialized())
+                result = ina226Sensor.runOnce();
             if (ina260Sensor.hasSensor() && !ina260Sensor.isInitialized())
                 result = ina260Sensor.runOnce();
             if (ina3221Sensor.hasSensor() && !ina3221Sensor.isInitialized())
@@ -170,6 +172,8 @@ bool PowerTelemetryModule::getPowerTelemetry(meshtastic_Telemetry *m)
 #if HAS_TELEMETRY && !defined(ARCH_PORTDUINO)
     if (ina219Sensor.hasSensor())
         valid = ina219Sensor.getMetrics(m);
+    if (ina226Sensor.hasSensor())
+        valid = ina226Sensor.getMetrics(m);
     if (ina260Sensor.hasSensor())
         valid = ina260Sensor.getMetrics(m);
     if (ina3221Sensor.hasSensor())

src/modules/Telemetry/Sensor/CurrentSensor.h

@@ -0,0 +1,13 @@
+#include "configuration.h"
+
+#if !MESHTASTIC_EXCLUDE_ENVIRONMENTAL_SENSOR
+
+#pragma once
+
+class CurrentSensor
+{
+  public:
+    virtual int16_t getCurrentMa() = 0;
+};
+
+#endif

src/modules/Telemetry/Sensor/INA219Sensor.cpp

@@ -45,4 +45,9 @@ uint16_t INA219Sensor::getBusVoltageMv()
     return lround(ina219.getBusVoltage_V() * 1000);
 }
 
+int16_t INA219Sensor::getCurrentMa()
+{
+    return lround(ina219.getCurrent_mA());
+}
+
 #endif

src/modules/Telemetry/Sensor/INA219Sensor.h

@@ -3,11 +3,12 @@
 #if HAS_TELEMETRY && !MESHTASTIC_EXCLUDE_ENVIRONMENTAL_SENSOR
 
 #include "../mesh/generated/meshtastic/telemetry.pb.h"
+#include "CurrentSensor.h"
 #include "TelemetrySensor.h"
 #include "VoltageSensor.h"
 #include <Adafruit_INA219.h>
 
-class INA219Sensor : public TelemetrySensor, VoltageSensor
+class INA219Sensor : public TelemetrySensor, VoltageSensor, CurrentSensor
 {
   private:
     Adafruit_INA219 ina219;
@@ -20,6 +21,7 @@ class INA219Sensor : public TelemetrySensor, VoltageSensor
     virtual int32_t runOnce() override;
     virtual bool getMetrics(meshtastic_Telemetry *measurement) override;
     virtual uint16_t getBusVoltageMv() override;
+    virtual int16_t getCurrentMa() override;
 };
 
 #endif

src/modules/Telemetry/Sensor/INA226Sensor.cpp

@@ -0,0 +1,58 @@
+#include "configuration.h"
+
+#if HAS_TELEMETRY && !MESHTASTIC_EXCLUDE_ENVIRONMENTAL_SENSOR
+
+#include "../mesh/generated/meshtastic/telemetry.pb.h"
+#include "INA226.h"
+#include "INA226Sensor.h"
+#include "TelemetrySensor.h"
+
+INA226Sensor::INA226Sensor() : TelemetrySensor(meshtastic_TelemetrySensorType_INA226, "INA226") {}
+
+int32_t INA226Sensor::runOnce()
+{
+    LOG_INFO("Init sensor: %s", sensorName);
+    if (!hasSensor()) {
+        return DEFAULT_SENSOR_MINIMUM_WAIT_TIME_BETWEEN_READS;
+    }
+
+    begin(nodeTelemetrySensorsMap[sensorType].second, nodeTelemetrySensorsMap[sensorType].first);
+
+    if (!status) {
+        status = ina226.begin();
+    }
+    return initI2CSensor();
+}
+
+void INA226Sensor::setup() {}
+
+void INA226Sensor::begin(TwoWire *wire, uint8_t addr)
+{
+    _wire = wire;
+    _addr = addr;
+    ina226 = INA226(_addr, _wire);
+    _wire->begin();
+}
+
+bool INA226Sensor::getMetrics(meshtastic_Telemetry *measurement)
+{
+    measurement->variant.environment_metrics.has_voltage = true;
+    measurement->variant.environment_metrics.has_current = true;
+
+    // mV conversion to V
+    measurement->variant.environment_metrics.voltage = ina226.getBusVoltage() / 1000;
+    measurement->variant.environment_metrics.current = ina226.getCurrent_mA();
+    return true;
+}
+
+uint16_t INA226Sensor::getBusVoltageMv()
+{
+    return lround(ina226.getBusVoltage());
+}
+
+int16_t INA226Sensor::getCurrentMa()
+{
+    return lround(ina226.getCurrent_mA());
+}
+
+#endif

src/modules/Telemetry/Sensor/INA226Sensor.h

@@ -0,0 +1,30 @@
+#include "configuration.h"
+
+#if HAS_TELEMETRY && !MESHTASTIC_EXCLUDE_ENVIRONMENTAL_SENSOR
+
+#include "../mesh/generated/meshtastic/telemetry.pb.h"
+#include "CurrentSensor.h"
+#include "TelemetrySensor.h"
+#include "VoltageSensor.h"
+#include <INA226.h>
+
+class INA226Sensor : public TelemetrySensor, VoltageSensor, CurrentSensor
+{
+  private:
+    uint8_t _addr = INA_ADDR;
+    TwoWire *_wire = &Wire;
+    INA226 ina226 = INA226(_addr, _wire);
+
+  protected:
+    virtual void setup() override;
+    void begin(TwoWire *wire = &Wire, uint8_t addr = INA_ADDR);
+
+  public:
+    INA226Sensor();
+    virtual int32_t runOnce() override;
+    virtual bool getMetrics(meshtastic_Telemetry *measurement) override;
+    virtual uint16_t getBusVoltageMv() override;
+    virtual int16_t getCurrentMa() override;
+};
+
+#endif

src/modules/Telemetry/Sensor/INA3221Sensor.cpp

@@ -102,4 +102,9 @@ uint16_t INA3221Sensor::getBusVoltageMv()
     return lround(ina3221.getVoltage(BAT_CH) * 1000);
 }
 
+int16_t INA3221Sensor::getCurrentMa()
+{
+    return lround(ina3221.getCurrent(BAT_CH));
+}
+
 #endif

src/modules/Telemetry/Sensor/INA3221Sensor.h

@@ -3,11 +3,12 @@
 #if HAS_TELEMETRY && !MESHTASTIC_EXCLUDE_ENVIRONMENTAL_SENSOR
 
 #include "../mesh/generated/meshtastic/telemetry.pb.h"
+#include "CurrentSensor.h"
 #include "TelemetrySensor.h"
 #include "VoltageSensor.h"
 #include <INA3221.h>
 
-class INA3221Sensor : public TelemetrySensor, VoltageSensor
+class INA3221Sensor : public TelemetrySensor, VoltageSensor, CurrentSensor
 {
   private:
     INA3221 ina3221 = INA3221(INA3221_ADDR42_SDA);
@@ -35,6 +36,7 @@ class INA3221Sensor : public TelemetrySensor, VoltageSensor
     int32_t runOnce() override;
     bool getMetrics(meshtastic_Telemetry *measurement) override;
     virtual uint16_t getBusVoltageMv() override;
+    virtual int16_t getCurrentMa() override;
 };
 
 struct _INA3221Measurement {

src/motion/LIS3DHSensor.cpp

@@ -22,7 +22,7 @@ int32_t LIS3DHSensor::runOnce()
 {
     if (sensor.getClick() > 0) {
         uint8_t click = sensor.getClick();
-        if (!config.device.double_tap_as_button_press) {
+        if (!config.device.double_tap_as_button_press && config.display.wake_on_tap_or_motion) {
             wakeScreen();
         }
 

src/mqtt/MQTT.cpp

@@ -232,14 +232,21 @@ bool isPrivateIpAddress(const IPAddress &ip)
     return false;
 }
 
-std::pair<std::string, uint16_t> parseHostAndPort(std::string address, uint16_t port = 0)
+// Separate a <host>[:<port>] string. Returns a pair containing the parsed host and port. If the port is
+// not present in the input string, or is invalid, the value of the `port` argument will be returned.
+std::pair<String, uint16_t> parseHostAndPort(String server, uint16_t port = 0)
 {
-    const size_t delimIndex = address.find_first_of(':');
+    const int delimIndex = server.indexOf(':');
     if (delimIndex > 0) {
-        port = std::stoul(address.substr(delimIndex + 1, address.length()));
-        address.resize(delimIndex);
+        const long parsedPort = server.substring(delimIndex + 1, server.length()).toInt();
+        if (parsedPort < 1 || parsedPort > UINT16_MAX) {
+            LOG_WARN("Invalid MQTT port %d: %s", parsedPort, server.c_str());
+        } else {
+            port = parsedPort;
+        }
+        server[delimIndex] = 0;
     }
-    return std::make_pair(std::move(address), port);
+    return std::make_pair(std::move(server), port);
 }
 } // namespace
 
@@ -435,7 +442,7 @@ void MQTT::reconnect()
         pubSub.setClient(mqttClient);
 #endif
 
-        std::pair<std::string, uint16_t> hostAndPort = parseHostAndPort(serverAddr, serverPort);
+        std::pair<String, uint16_t> hostAndPort = parseHostAndPort(serverAddr, serverPort);
         serverAddr = hostAndPort.first.c_str();
         serverPort = hostAndPort.second;
         pubSub.setServer(serverAddr, serverPort);
@@ -450,9 +457,7 @@ void MQTT::reconnect()
             enabled = true; // Start running background process again
             runASAP = true;
             reconnectCount = 0;
-#if !defined(ARCH_PORTDUINO)
             isMqttServerAddressPrivate = isPrivateIpAddress(mqttClient.remoteIP());
-#endif
 
             publishNodeInfo();
             sendSubscriptions();

src/platform/rp2xx0/architecture.h

@@ -33,4 +33,6 @@
 #define HW_VENDOR meshtastic_HardwareModel_RP2040_LORA
 #elif defined(RP2040_FEATHER_RFM95)
 #define HW_VENDOR meshtastic_HardwareModel_RP2040_FEATHER_RFM95
+#elif defined(PRIVATE_HW)
+#define HW_VENDOR meshtastic_HardwareModel_PRIVATE_HW
 #endif

src/power.h

@@ -42,10 +42,12 @@ extern RTC_NOINIT_ATTR uint64_t RTC_reg_b;
 
 #if HAS_TELEMETRY && !MESHTASTIC_EXCLUDE_ENVIRONMENTAL_SENSOR && !defined(ARCH_PORTDUINO)
 #include "modules/Telemetry/Sensor/INA219Sensor.h"
+#include "modules/Telemetry/Sensor/INA226Sensor.h"
 #include "modules/Telemetry/Sensor/INA260Sensor.h"
 #include "modules/Telemetry/Sensor/INA3221Sensor.h"
-extern INA260Sensor ina260Sensor;
 extern INA219Sensor ina219Sensor;
+extern INA226Sensor ina226Sensor;
+extern INA260Sensor ina260Sensor;
 extern INA3221Sensor ina3221Sensor;
 #endif
 

variants/nibble_esp32/platformio.ini

@@ -0,0 +1,6 @@
+[env:nibble-esp32]
+extends = esp32s3_base
+board = esp32-s3-zero
+board_level = extra
+build_flags = 
+  ${esp32_base.build_flags} -D PRIVATE_HW -I variants/nibble_esp32

variants/nibble_esp32/variant.h

@@ -0,0 +1,18 @@
+#define I2C_SDA 11 // I2C pins for this board
+#define I2C_SCL 10
+
+#define LED_PIN 1 // If defined we will blink this LED
+
+#define BUTTON_PIN 0 // If defined, this will be used for user button presses
+#define BUTTON_NEED_PULLUP
+
+#define USE_RF95
+#define LORA_SCK 6
+#define LORA_MISO 7
+#define LORA_MOSI 8
+#define LORA_CS 9
+#define LORA_DIO0 5 // a No connect on the SX1262 module
+#define LORA_RESET 4
+
+#define LORA_DIO1 RADIOLIB_NC
+#define LORA_DIO2 RADIOLIB_NC

variants/nibble_rp2040/platformio.ini

@@ -0,0 +1,17 @@
+[env:nibble-rp2040]
+extends = rp2040_base
+board = rpipico
+board_level = extra
+upload_protocol = picotool
+
+# add our variants files to the include and src paths
+build_flags = ${rp2040_base.build_flags} 
+  -DPRIVATE_HW
+  -Ivariants/nibble_rp2040
+  -DDEBUG_RP2040_PORT=Serial
+  -DHW_SPI1_DEVICE
+  -L "${platformio.libdeps_dir}/${this.__env__}/bsec2/src/cortex-m0plus"
+lib_deps =
+  ${rp2040_base.lib_deps}
+debug_build_flags = ${rp2040_base.build_flags}, -g
+debug_tool = cmsis-dap ; for e.g. Picotool

variants/nibble_rp2040/variant.h

@@ -0,0 +1,18 @@
+#define ARDUINO_ARCH_AVR
+
+#define BUTTON_PIN -1 // Pin 17 used for antenna switching via DIO4
+
+#define LED_PIN 1
+
+#define HAS_CPU_SHUTDOWN 1
+
+#define USE_RF95
+#define LORA_SCK 10
+#define LORA_MISO 12
+#define LORA_MOSI 11
+#define LORA_CS 13
+
+#define LORA_DIO0 14
+#define LORA_RESET 15
+#define LORA_DIO1 RADIOLIB_NC
+#define LORA_DIO2 RADIOLIB_NC

variants/nugget_s2_lora/platformio.ini

@@ -0,0 +1,6 @@
+[env:nugget-s2-lora]
+extends = esp32s2_base
+board = lolin_s2_mini
+board_level = extra
+build_flags = 
+  ${esp32s2_base.build_flags} -D PRIVATE_HW -I variants/nugget_s2_lora

variants/nugget_s2_lora/variant.h

@@ -0,0 +1,23 @@
+#define I2C_SDA 34 // I2C pins for this board
+#define I2C_SCL 36
+
+#define LED_PIN 15 // If defined we will blink this LED
+
+#define HAS_NEOPIXEL                         // Enable the use of neopixels
+#define NEOPIXEL_COUNT 3                     // How many neopixels are connected
+#define NEOPIXEL_DATA 12                     // gpio pin used to send data to the neopixels
+#define NEOPIXEL_TYPE (NEO_GRB + NEO_KHZ800) // type of neopixels in use
+
+#define BUTTON_PIN 0 // If defined, this will be used for user button presses
+#define BUTTON_NEED_PULLUP
+
+#define USE_RF95
+#define LORA_SCK 6
+#define LORA_MISO 8
+#define LORA_MOSI 10
+#define LORA_CS 13
+#define LORA_DIO0 16
+#define LORA_RESET 5
+
+#define LORA_DIO1 RADIOLIB_NC
+#define LORA_DIO2 RADIOLIB_NC

variants/nugget_s3_lora/platformio.ini

@@ -0,0 +1,6 @@
+[env:nugget-s3-lora]
+extends = esp32s3_base
+board = lolin_s3_mini
+board_level = extra
+build_flags = 
+  ${esp32s3_base.build_flags} -D PRIVATE_HW -I variants/nugget_s3_lora

variants/nugget_s3_lora/variant.h

@@ -0,0 +1,23 @@
+#define I2C_SDA 34 // I2C pins for this board
+#define I2C_SCL 38
+
+#define LED_PIN 15 // If defined we will blink this LED
+
+#define HAS_NEOPIXEL                         // Enable the use of neopixels
+#define NEOPIXEL_COUNT 3                     // How many neopixels are connected
+#define NEOPIXEL_DATA 10                     // gpio pin used to send data to the neopixels
+#define NEOPIXEL_TYPE (NEO_GRB + NEO_KHZ800) // type of neopixels in use
+
+#define BUTTON_PIN 0 // If defined, this will be used for user button presses
+#define BUTTON_NEED_PULLUP
+
+#define USE_RF95
+#define LORA_SCK 6
+#define LORA_MISO 7
+#define LORA_MOSI 8
+#define LORA_CS 9
+#define LORA_DIO0 16 // a No connect on the SX1262 module
+#define LORA_RESET 4
+
+#define LORA_DIO1 RADIOLIB_NC
+#define LORA_DIO2 RADIOLIB_NC

variants/portduino-buildroot/platformio.ini

@@ -3,7 +3,6 @@ extends = portduino_base
 ; Optional libraries should be appended to `PLATFORMIO_BUILD_FLAGS`
 ; environment variable in the buildroot environment.
 build_flags = ${portduino_base.build_flags} -O0 -I variants/portduino-buildroot
-  -std=c++17
 board = buildroot
 lib_deps = ${portduino_base.lib_deps}
 build_src_filter = ${portduino_base.build_src_filter}