diff --git a/bin/config.d/femtofox/femtofox_EByte-E22-900M30S_Ebyte-E22-900M22S.yaml b/bin/config.d/femtofox/femtofox_EByte-E22-900M30S_Ebyte-E22-900M22S.yaml new file mode 100644 index 000000000..6c88b1eb2 --- /dev/null +++ b/bin/config.d/femtofox/femtofox_EByte-E22-900M30S_Ebyte-E22-900M22S.yaml @@ -0,0 +1,16 @@ +--- +Lora: +## Ebyte E22-900M30S, E22-900M22S with no external RF switching setup +## Will work with any module without RF switching, and with TCXO + Module: sx1262 + gpiochip: 1 # subtract 32 from the gpio numbers + DIO2_AS_RF_SWITCH: true + DIO3_TCXO_VOLTAGE: true + CS: 16 #pin6 / GPIO48 1C0 + IRQ: 23 #pin17 / GPIO55 1C7 + Busy: 22 #pin16 / GPIO54 1C6 + Reset: 25 #pin13 / GPIO57 1D1 + RXen: 24 #pin12 / GPIO56 1D0 + #TXen: bridge to DIO2 on E22 module + spidev: spidev0.0 + spiSpeed: 2000000 \ No newline at end of file diff --git a/bin/config.d/femtofox/femtofox_EByte-E22-900MM22S.yaml b/bin/config.d/femtofox/femtofox_EByte-E22-900MM22S.yaml new file mode 100644 index 000000000..451d5d3f4 --- /dev/null +++ b/bin/config.d/femtofox/femtofox_EByte-E22-900MM22S.yaml @@ -0,0 +1,16 @@ +--- +Lora: +## Ebyte E22-900MM22S with no external RF switching setup +## Will work with any module without RF switching and no TCXO + Module: sx1262 + gpiochip: 1 # subtract 32 from the gpio numbers + DIO2_AS_RF_SWITCH: true + DIO3_TCXO_VOLTAGE: true + CS: 16 #pin6 / GPIO48 1C0 + IRQ: 23 #pin17 / GPIO55 1C7 + Busy: 22 #pin16 / GPIO54 1C6 + Reset: 25 #pin13 / GPIO57 1D1 + RXen: 24 #pin12 / GPIO56 1D0 + #TXen: bridge to DIO2 on E22 module + spidev: spidev0.0 + spiSpeed: 2000000 \ No newline at end of file diff --git a/bin/config.d/femtofox/femtofox_Heltec-HT-RA62_Seeed-WIO-SX1262.yaml b/bin/config.d/femtofox/femtofox_Heltec-HT-RA62_Seeed-WIO-SX1262.yaml new file mode 100644 index 000000000..d5f02b42c --- /dev/null +++ b/bin/config.d/femtofox/femtofox_Heltec-HT-RA62_Seeed-WIO-SX1262.yaml @@ -0,0 +1,14 @@ +--- +Lora: +## Heltec HT-RA62, Seeed WIO SX1262 +## Will work with any module with automatic RF switching, and with TCXO + Module: sx1262 + gpiochip: 1 # subtract 32 from the gpio numbers + DIO2_AS_RF_SWITCH: true + DIO3_TCXO_VOLTAGE: true + CS: 16 #pin6 (GPIO pin 48 1C0) + IRQ: 23 #pin17 (GPIO pin 55 1C7) + Reset: 25 #pin13 (GPIO pin 57 1D1) + Busy: 22 #pin16 (GPIO pin 54 1C6) + spidev: spidev0.0 #pins are (CS=6, CLK=7, MOSI=8, MISO=9) + spiSpeed: 2000000 \ No newline at end of file diff --git a/bin/config.d/femtofox/femtofox_Waveshare-SX126X-XXXM_AI-Thinker-RA-01SH.yaml b/bin/config.d/femtofox/femtofox_Waveshare-SX126X-XXXM_AI-Thinker-RA-01SH.yaml new file mode 100644 index 000000000..23834adec --- /dev/null +++ b/bin/config.d/femtofox/femtofox_Waveshare-SX126X-XXXM_AI-Thinker-RA-01SH.yaml @@ -0,0 +1,13 @@ +--- +Lora: +## Waveshare SX126X XXXM, AI Thinker RA-01SH +## Will work with any module with automatic RF switching, and with no TCXO + Module: sx1262 + gpiochip: 1 # subtract 32 from the gpio numbers + DIO2_AS_RF_SWITCH: true + CS: 16 #pin6 (GPIO pin 48 1C0) + IRQ: 23 #pin17 (GPIO pin 55 1C7) + Reset: 25 #pin13 (GPIO pin 57 1D1) + Busy: 22 #pin16 (GPIO pin 54 1C6) + spidev: spidev0.0 #pins are (CS=6, CLK=7, MOSI=8, MISO=9) + spiSpeed: 2000000