new device: Lilygo T-Eth-Elite (#6321)

src/DebugConfiguration.h

@@ -121,10 +121,15 @@ extern "C" void logLegacy(const char *level, const char *fmt, ...);
 // Default Bluetooth PIN
 #define defaultBLEPin 123456
 
-#if HAS_ETHERNET
+#if HAS_ETHERNET && !defined(USE_WS5500)
 #include <RAK13800_W5100S.h>
 #endif // HAS_ETHERNET
 
+#if HAS_ETHERNET && defined(USE_WS5500)
+#include <ETHClass2.h>
+#define ETH ETH2
+#endif // HAS_ETHERNET
+
 #if HAS_WIFI
 #include <WiFi.h>
 #endif // HAS_WIFI
@@ -164,4 +169,4 @@ class Syslog
     bool vlogf(uint16_t pri, const char *appName, const char *fmt, va_list args) __attribute__((format(printf, 3, 0)));
 };
 
-#endif // HAS_ETHERNET || HAS_WIFI
+#endif // HAS_NETWORKING

src/Power.cpp

@@ -32,6 +32,11 @@
 #include <WiFi.h>
 #endif
 
+#if HAS_ETHERNET && defined(USE_WS5500)
+#include <ETHClass2.h>
+#define ETH ETH2
+#endif // HAS_ETHERNET
+
 #endif
 
 #ifndef DELAY_FOREVER

src/gps/GPS.cpp

@@ -1104,12 +1104,16 @@ int32_t GPS::runOnce()
     return (powerState == GPS_ACTIVE) ? GPS_THREAD_INTERVAL : 5000;
 }
 
-// clear the GPS rx buffer as quickly as possible
+// clear the GPS rx/tx buffer as quickly as possible
 void GPS::clearBuffer()
 {
+#ifdef ARCH_ESP32
+    _serial_gps->flush(false);
+#else
     int x = _serial_gps->available();
     while (x--)
         _serial_gps->read();
+#endif
 }
 
 /// Prepare the GPS for the cpu entering deep or light sleep, expect to be gone for at least 100s of msecs

src/main.cpp

@@ -55,12 +55,12 @@ NimbleBluetooth *nimbleBluetooth = nullptr;
 NRF52Bluetooth *nrf52Bluetooth = nullptr;
 #endif
 
-#if HAS_WIFI
+#if HAS_WIFI || defined(USE_WS5500)
 #include "mesh/api/WiFiServerAPI.h"
 #include "mesh/wifi/WiFiAPClient.h"
 #endif
 
-#if HAS_ETHERNET
+#if HAS_ETHERNET && !defined(USE_WS5500)
 #include "mesh/api/ethServerAPI.h"
 #include "mesh/eth/ethClient.h"
 #endif

src/mesh/InterfacesTemplates.cpp

@@ -25,7 +25,7 @@ template class LR11x0Interface<LR1121>;
 template class SX126xInterface<STM32WLx>;
 #endif
 
-#if HAS_ETHERNET
+#if HAS_ETHERNET && !defined(USE_WS5500)
 #include "api/ethServerAPI.h"
 template class ServerAPI<EthernetClient>;
 template class APIServerPort<ethServerAPI, EthernetServer>;

src/mesh/api/WiFiServerAPI.h

@@ -3,6 +3,11 @@
 #include "ServerAPI.h"
 #include <WiFi.h>
 
+#if HAS_ETHERNET && defined(USE_WS5500)
+#include <ETHClass2.h>
+#define ETH ETH2
+#endif // HAS_ETHERNET
+
 /**
  * Provides both debug printing and, if the client starts sending protobufs to us, switches to send/receive protobufs
  * (and starts dropping debug printing - FIXME, eventually those prints should be encapsulated in protobufs).

src/mesh/api/ethServerAPI.cpp

@@ -1,7 +1,7 @@
 #include "configuration.h"
 #include <Arduino.h>
 
-#if HAS_ETHERNET
+#if HAS_ETHERNET && !defined(USE_WS5500)
 
 #include "ethServerAPI.h"
 

src/mesh/api/ethServerAPI.h

@@ -1,6 +1,7 @@
 #pragma once
 
 #include "ServerAPI.h"
+#ifndef USE_WS5500
 #include <RAK13800_W5100S.h>
 
 /**
@@ -23,3 +24,4 @@ class ethServerPort : public APIServerPort<ethServerAPI, EthernetServer>
 };
 
 void initApiServer(int port = SERVER_API_DEFAULT_PORT);
+#endif

src/mesh/http/WebServer.cpp

@@ -12,6 +12,11 @@
 #include <WebServer.h>
 #include <WiFi.h>
 
+#if HAS_ETHERNET && defined(USE_WS5500)
+#include <ETHClass2.h>
+#define ETH ETH2
+#endif // HAS_ETHERNET
+
 #ifdef ARCH_ESP32
 #include "esp_task_wdt.h"
 #endif
@@ -166,14 +171,14 @@ WebServerThread *webServerThread;
 
 WebServerThread::WebServerThread() : concurrency::OSThread("WebServer")
 {
-    if (!config.network.wifi_enabled) {
+    if (!config.network.wifi_enabled && !config.network.eth_enabled) {
         disable();
     }
 }
 
 int32_t WebServerThread::runOnce()
 {
-    if (!config.network.wifi_enabled) {
+    if (!config.network.wifi_enabled && !config.network.eth_enabled) {
         disable();
     }
 

src/mesh/udp/UdpMulticastThread.h

@@ -7,6 +7,11 @@
 #include <AsyncUDP.h>
 #include <WiFi.h>
 
+#if HAS_ETHERNET && defined(USE_WS5500)
+#include <ETHClass2.h>
+#define ETH ETH2
+#endif // HAS_ETHERNET
+
 #define UDP_MULTICAST_DEFAUL_PORT 4403 // Default port for UDP multicast is same as TCP api server
 #define UDP_MULTICAST_THREAD_INTERVAL_MS 15000
 

src/mesh/wifi/WiFiAPClient.cpp

@@ -9,6 +9,12 @@
 #include "mesh/api/WiFiServerAPI.h"
 #include "target_specific.h"
 #include <WiFi.h>
+
+#if HAS_ETHERNET && defined(USE_WS5500)
+#include <ETHClass2.h>
+#define ETH ETH2
+#endif // HAS_ETHERNET
+
 #include <WiFiUdp.h>
 #ifdef ARCH_ESP32
 #if !MESHTASTIC_EXCLUDE_WEBSERVER
@@ -52,11 +58,28 @@ Syslog syslog(syslogClient);
 
 Periodic *wifiReconnect;
 
+#ifdef USE_WS5500
+// Startup Ethernet
+bool initEthernet()
+{
+    if ((config.network.eth_enabled) && (ETH.begin(ETH_PHY_W5500, 1, ETH_CS_PIN, ETH_INT_PIN, ETH_RST_PIN, SPI3_HOST,
+                                                   ETH_SCLK_PIN, ETH_MISO_PIN, ETH_MOSI_PIN))) {
+        WiFi.onEvent(WiFiEvent);
+#if !MESHTASTIC_EXCLUDE_WEBSERVER
+        createSSLCert(); // For WebServer
+#endif
+        return true;
+    }
+
+    return false;
+}
+#endif
+
 static void onNetworkConnected()
 {
     if (!APStartupComplete) {
         // Start web server
-        LOG_INFO("Start WiFi network services");
+        LOG_INFO("Start network services");
 
         // start mdns
         if (!MDNS.begin("Meshtastic")) {
@@ -188,6 +211,10 @@ bool isWifiAvailable()
 
     if (config.network.wifi_enabled && (config.network.wifi_ssid[0])) {
         return true;
+#ifdef USE_WS5500
+    } else if (config.network.eth_enabled) {
+        return true;
+#endif
     } else {
         return false;
     }
@@ -282,7 +309,7 @@ bool initWifi()
 // Called by the Espressif SDK to
 static void WiFiEvent(WiFiEvent_t event)
 {
-    LOG_DEBUG("WiFi-Event %d: ", event);
+    LOG_DEBUG("Network-Event %d: ", event);
 
     switch (event) {
     case ARDUINO_EVENT_WIFI_READY:
@@ -377,19 +404,32 @@ static void WiFiEvent(WiFiEvent_t event)
         LOG_INFO("Ethernet started");
         break;
     case ARDUINO_EVENT_ETH_STOP:
+        syslog.disable();
         LOG_INFO("Ethernet stopped");
         break;
     case ARDUINO_EVENT_ETH_CONNECTED:
         LOG_INFO("Ethernet connected");
         break;
     case ARDUINO_EVENT_ETH_DISCONNECTED:
+        syslog.disable();
         LOG_INFO("Ethernet disconnected");
         break;
     case ARDUINO_EVENT_ETH_GOT_IP:
-        LOG_INFO("Obtained IP address (ARDUINO_EVENT_ETH_GOT_IP)");
+#ifdef USE_WS5500
+        LOG_INFO("Obtained IP address: %s, %u Mbps, %s", ETH.localIP().toString().c_str(), ETH.linkSpeed(),
+                 ETH.fullDuplex() ? "FULL_DUPLEX" : "HALF_DUPLEX");
+        onNetworkConnected();
+#endif
         break;
     case ARDUINO_EVENT_ETH_GOT_IP6:
-        LOG_INFO("Obtained IP6 address (ARDUINO_EVENT_ETH_GOT_IP6)");
+#ifdef USE_WS5500
+#if ESP_ARDUINO_VERSION >= ESP_ARDUINO_VERSION_VAL(3, 0, 0)
+        LOG_INFO("Obtained Local IP6 address: %s", ETH.linkLocalIPv6().toString().c_str());
+        LOG_INFO("Obtained GlobalIP6 address: %s", ETH.globalIPv6().toString().c_str());
+#else
+        LOG_INFO("Obtained IP6 address: %s", ETH.localIPv6().toString().c_str());
+#endif
+#endif
         break;
     case ARDUINO_EVENT_SC_SCAN_DONE:
         LOG_INFO("SmartConfig: Scan done");

src/mesh/wifi/WiFiAPClient.h

@@ -9,6 +9,11 @@
 #include <WiFi.h>
 #endif
 
+#if HAS_ETHERNET && defined(USE_WS5500)
+#include <ETHClass2.h>
+#define ETH ETH2
+#endif // HAS_ETHERNET
+
 extern bool needReconnect;
 extern concurrency::Periodic *wifiReconnect;
 
@@ -19,4 +24,9 @@ void deinitWifi();
 
 bool isWifiAvailable();
 
-uint8_t getWifiDisconnectReason();
+uint8_t getWifiDisconnectReason();
+
+#ifdef USE_WS5500
+// Startup Ethernet
+bool initEthernet();
+#endif

src/modules/AdminModule.cpp

@@ -988,7 +988,7 @@ void AdminModule::handleGetDeviceConnectionStatus(const meshtastic_MeshPacket &r
     }
 #endif
 
-#if HAS_ETHERNET
+#if HAS_ETHERNET && !defined(USE_WS5500)
     conn.has_ethernet = true;
     conn.ethernet.has_status = true;
     if (Ethernet.linkStatus() == LinkON) {

src/mqtt/MQTT.cpp

@@ -19,6 +19,10 @@
 #include "mesh/wifi/WiFiAPClient.h"
 #include <WiFi.h>
 #endif
+#if HAS_ETHERNET && defined(USE_WS5500)
+#include <ETHClass2.h>
+#define ETH ETH2
+#endif // HAS_ETHERNET
 #include "Default.h"
 #if !defined(ARCH_NRF52) || NRF52_USE_JSON
 #include "serialization/JSON.h"
@@ -295,6 +299,11 @@ bool connectPubSub(const PubSubConfig &config, PubSubClient &pubSub, Client &cli
 
 inline bool isConnectedToNetwork()
 {
+#ifdef USE_WS5500
+    if (ETH.connected())
+        return true;
+#endif
+
 #if HAS_WIFI
     return WiFi.isConnected();
 #elif HAS_ETHERNET

src/mqtt/MQTT.h

@@ -14,7 +14,7 @@
 #include <WiFiClientSecure.h>
 #endif
 #endif
-#if HAS_ETHERNET
+#if HAS_ETHERNET && !defined(USE_WS5500)
 #include <EthernetClient.h>
 #endif
 

src/platform/esp32/architecture.h

@@ -176,6 +176,8 @@
 #define HW_VENDOR meshtastic_HardwareModel_SEEED_XIAO_S3
 #elif defined(MESH_TAB)
 #define HW_VENDOR meshtastic_HardwareModel_MESH_TAB
+#elif defined(T_ETH_ELITE)
+#define HW_VENDOR meshtastic_HardwareModel_T_ETH_ELITE
 #endif
 
 // -----------------------------------------------------------------------------

src/platform/esp32/main-esp32.cpp

@@ -26,7 +26,9 @@
 #if !defined(CONFIG_IDF_TARGET_ESP32S2) && !MESHTASTIC_EXCLUDE_BLUETOOTH
 void setBluetoothEnable(bool enable)
 {
-#if HAS_WIFI
+#ifdef USE_WS5500
+    if ((config.bluetooth.enabled == true) && (config.network.wifi_enabled == false))
+#elif HAS_WIFI
     if (!isWifiAvailable() && config.bluetooth.enabled == true)
 #else
     if (config.bluetooth.enabled == true)

variants/t-eth-elite/pins_arduino.h

@@ -0,0 +1,26 @@
+#ifndef Pins_Arduino_h
+#define Pins_Arduino_h
+
+#include <stdint.h>
+
+#define USB_VID 0x303a
+#define USB_PID 0x1001
+
+// The default Wire will be mapped to PMU and RTC
+static const uint8_t SDA = 17;
+static const uint8_t SCL = 18;
+
+// Default SPI will be mapped to Radio
+static const uint8_t SS = 40;
+static const uint8_t MOSI = 11;
+static const uint8_t MISO = 9;
+static const uint8_t SCK = 10;
+
+#define SPI_MOSI (11)
+#define SPI_SCK (10)
+#define SPI_MISO (9)
+#define SPI_CS (12)
+
+#define SDCARD_CS SPI_CS
+
+#endif /* Pins_Arduino_h */

variants/t-eth-elite/platformio.ini

@@ -0,0 +1,16 @@
+[env:t-eth-elite]
+extends = esp32s3_base
+board = esp32s3box
+board_check = true
+build_flags = 
+  ${esp32s3_base.build_flags}
+  -D T_ETH_ELITE
+  -I variants/t-eth-elite
+  -DGPS_POWER_TOGGLE ; comment this line to disable triple press function on the user button to turn off gps entirely.
+
+lib_ignore = 
+    Ethernet
+
+lib_deps = 
+  ${esp32s3_base.lib_deps}
+  https://github.com/meshtastic/ETHClass2#v1.0.0

variants/t-eth-elite/rfswitch.h

@@ -0,0 +1,11 @@
+#include "RadioLib.h"
+
+static const uint32_t rfswitch_dio_pins[] = {RADIOLIB_LR11X0_DIO5, RADIOLIB_LR11X0_DIO6, RADIOLIB_NC, RADIOLIB_NC, RADIOLIB_NC};
+
+static const Module::RfSwitchMode_t rfswitch_table[] = {
+    // mode                  DIO5  DIO6
+    {LR11x0::MODE_STBY, {LOW, LOW}},  {LR11x0::MODE_RX, {HIGH, LOW}},
+    {LR11x0::MODE_TX, {LOW, HIGH}},   {LR11x0::MODE_TX_HP, {LOW, HIGH}},
+    {LR11x0::MODE_TX_HF, {LOW, LOW}}, {LR11x0::MODE_GNSS, {LOW, LOW}},
+    {LR11x0::MODE_WIFI, {LOW, LOW}},  END_OF_MODE_TABLE,
+};

variants/t-eth-elite/variant.h

@@ -0,0 +1,83 @@
+#define HAS_SDCARD
+#define SDCARD_USE_SPI1
+
+#define HAS_GPS 1
+#define GPS_RX_PIN 39
+#define GPS_TX_PIN 42
+#define GPS_BAUDRATE_FIXED 1
+#define GPS_BAUDRATE 9600
+
+#define I2C_SDA 17 // I2C pins for this board
+#define I2C_SCL 18
+
+#define HAS_SCREEN 1 // Allow for OLED Screens on I2C Header of shield
+
+#define LED_PIN 38   // If defined we will blink this LED
+#define BUTTON_PIN 0 // If defined, this will be used for user button presses,
+
+#define BUTTON_NEED_PULLUP
+
+// TTGO uses a common pinout for their SX1262 vs RF95 modules - both can be enabled and we will probe at runtime for RF95 and if
+// not found then probe for SX1262
+#define USE_RF95 // RFM95/SX127x
+#define USE_SX1262
+#define USE_SX1280
+#define USE_LR1121
+
+#define LORA_SCK 10
+#define LORA_MISO 9
+#define LORA_MOSI 11
+#define LORA_CS 40
+#define LORA_RESET 46
+
+// per SX1276_Receive_Interrupt/utilities.h
+#define LORA_DIO0 8
+#define LORA_DIO1 16
+#define LORA_DIO2 RADIOLIB_NC
+
+// per SX1262_Receive_Interrupt/utilities.h
+#ifdef USE_SX1262
+#define SX126X_CS LORA_CS
+#define SX126X_DIO1 8
+#define SX126X_BUSY 16
+#define SX126X_RESET LORA_RESET
+#define SX126X_DIO2_AS_RF_SWITCH
+#define SX126X_DIO3_TCXO_VOLTAGE 1.8
+#endif
+
+// per SX128x_Receive_Interrupt/utilities.h
+#ifdef USE_SX1280
+#define SX128X_CS LORA_CS
+#define SX128X_DIO1 8
+#define SX128X_DIO2 33
+#define SX128X_DIO3 34
+#define SX128X_BUSY 16
+#define SX128X_RESET LORA_RESET
+#define SX128X_RXEN 13
+#define SX128X_TXEN 38
+#define SX128X_MAX_POWER 3
+#endif
+
+// LR1121
+#ifdef USE_LR1121
+#define LR1121_IRQ_PIN 8
+#define LR1121_NRESET_PIN LORA_RESET
+#define LR1121_BUSY_PIN 16
+#define LR1121_SPI_NSS_PIN LORA_CS
+#define LR1121_SPI_SCK_PIN LORA_SCK
+#define LR1121_SPI_MOSI_PIN LORA_MOSI
+#define LR1121_SPI_MISO_PIN LORA_MISO
+#define LR11X0_DIO3_TCXO_VOLTAGE 3.0
+#define LR11X0_DIO_AS_RF_SWITCH
+#endif
+
+#define HAS_ETHERNET 1
+#define USE_WS5500 1 // this driver uses the same stack as the ESP32 Wifi driver
+
+#define ETH_MISO_PIN 47
+#define ETH_MOSI_PIN 21
+#define ETH_SCLK_PIN 48
+#define ETH_CS_PIN 45
+#define ETH_INT_PIN 14
+#define ETH_RST_PIN -1
+#define ETH_ADDR 1