pohui_pohui/firmware
1
0
Fork 0
mirror of https://github.com/meshtastic/firmware.git synced 2025-08-04 12:44:40 +00:00
Code Issues Actions 4 Packages Projects Releases Wiki Activity

Cleanup variant.h for Elecrow Thinknode M5

Browse Source
This commit is contained in:
Jonathan Bennett 2025-08-03 19:08:05 -05:00
parent 917e352915
commit 1aa0bef485
2 changed files with 21 additions and 39 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

1
variants/esp32s3/ELECROW-ThinkNode-M5/platformio.ini
View File

@ -8,7 +8,6 @@ build_flags =
-DEINK_DISPLAY_MODEL=GxEPD2_154_D67 -DEINK_DISPLAY_MODEL=GxEPD2_154_D67
-DEINK_WIDTH=200 -DEINK_WIDTH=200
-DEINK_HEIGHT=200 -DEINK_HEIGHT=200
-DUSE_EINK
-DUSE_EINK_DYNAMICDISPLAY ; Enable Dynamic EInk -DUSE_EINK_DYNAMICDISPLAY ; Enable Dynamic EInk
-DEINK_LIMIT_FASTREFRESH=10 ; How many consecutive fast-refreshes are permitted //20 -DEINK_LIMIT_FASTREFRESH=10 ; How many consecutive fast-refreshes are permitted //20
-DEINK_LIMIT_RATE_BACKGROUND_SEC=10 ; Minimum interval between BACKGROUND updates //30 -DEINK_LIMIT_RATE_BACKGROUND_SEC=10 ; Minimum interval between BACKGROUND updates //30

57
variants/esp32s3/ELECROW-ThinkNode-M5/variant.h
View File

@ -1,46 +1,38 @@
// Status #ifndef ELECROW_ThinkNode_M5_VAR
// #define LED_PIN_POWER 1 #define ELECROW_ThinkNode_M5_VAR
// #define BIAS_T_ENABLE LED_PIN_POWER
// #define BIAS_T_VALUE HIGH
#define ELECROW_ThinkNode_M5
#define M5_buzzer 5
#define UART_TX 43 #define UART_TX 43
#define UART_RX 44 #define UART_RX 44
// LED // LED
#define POWER_LED 3 // red // Both of these are on the GPIO expander
#define LED_POWER 2 #define PCA_LED_USER 1 // the Blue LED
// #define USER_LED 1 //green #define PCA_LED_POWER 3 // the Red LED? Seems to have hardware logic to blink when USB is plugged in.
// USB_CHECK // USB_CHECK
#define USB_CHECK 12 #define EXT_PWR_DETECT 12
#define ADC_V 4 #define ADC_V 8
#define PIN_BUZZER 9
// Buttons
/*
* Buttons
*/
#define PIN_BUTTON2 14 #define PIN_BUTTON2 14
#define PIN_BUTTON1 21 #define PIN_BUTTON1 21
/*Wire Interfaces*/ // Wire Interfaces
#define I2C_SCL 1 #define I2C_SCL 1
#define I2C_SDA 2 #define I2C_SDA 2
// #define I2C_SCL 47
// #define I2C_SDA 48 // GPS pins
/*
* GPS pins
*/
#define GPS_SWITH 10 #define GPS_SWITH 10
// #define HAS_GPS 1 #define HAS_GPS 1
#define GPS_L76K #define GPS_L76K
#define PIN_GPS_REINIT 13 // An output to reset L76K GPS. As per datasheet, low for > 100ms will reset the L76K #define PIN_GPS_REINIT 13 // An output to reset L76K GPS. As per datasheet, low for > 100ms will reset the L76K
#define PIN_GPS_STANDBY 11 // An output to wake GPS, low means allow sleep, high means force wake #define PIN_GPS_STANDBY 11 // An output to wake GPS, low means allow sleep, high means force wake
// Seems to be missing on this new board
// #define PIN_GPS_PPS (32 + 4) // Pulse per second input from the GPS
#define GPS_TX_PIN 20 // This is for bits going TOWARDS the CPU #define GPS_TX_PIN 20 // This is for bits going TOWARDS the CPU
#define GPS_RX_PIN 19 // This is for bits going TOWARDS the GPS #define GPS_RX_PIN 19 // This is for bits going TOWARDS the GPS
@ -60,7 +52,6 @@
#define SX126X_BUSY 5 #define SX126X_BUSY 5
#define SX126X_DIO1 4 #define SX126X_DIO1 4
#define SX126X_DIO2_AS_RF_SWITCH #define SX126X_DIO2_AS_RF_SWITCH
// #define SX126X_DIO3 9
#define SX126X_DIO3_TCXO_VOLTAGE 3.3 #define SX126X_DIO3_TCXO_VOLTAGE 3.3
#define SX126X_POWER_EN 46 #define SX126X_POWER_EN 46
#define SX126X_MAX_POWER 22 // SX126xInterface.cpp defaults to 22 if not defined, but here we define it for good practice #define SX126X_MAX_POWER 22 // SX126xInterface.cpp defaults to 22 if not defined, but here we define it for good practice
@ -70,7 +61,7 @@
#define USE_EINK #define USE_EINK
#define PIN_EINK_EN -1 // Note: this is really just backlight power #define PIN_EINK_EN -1 // Note: this is really just backlight power
#define PCA_PIN_EINK_EN 5 #define PCA_PIN_EINK_EN 5 // This is the pin number on the GPIO expander
#define PIN_EINK_CS 39 #define PIN_EINK_CS 39
#define PIN_EINK_BUSY 42 #define PIN_EINK_BUSY 42
#define PIN_EINK_DC 40 #define PIN_EINK_DC 40
@ -80,20 +71,12 @@
// Controls power for all peripherals (eink + GPS + LoRa + Sensor) // Controls power for all peripherals (eink + GPS + LoRa + Sensor)
#define PIN_POWER_EN -1 #define PIN_POWER_EN -1
#define PCA_PIN_POWER_EN 4 #define PCA_PIN_POWER_EN 4 // This is the pin number on the GPIO expander
// #define PIN_SPI1_MISO -1
// #define PIN_SPI1_MOSI PIN_EINK_MOSI
// #define PIN_SPI1_SCK PIN_EINK_SCLK
/*
* SPI Interfaces
*/
// #define SPI_INTERFACES_COUNT 1s
// For LORA, spi 2
#define PIN_SPI_MISO 7 #define PIN_SPI_MISO 7
#define PIN_SPI_MOSI 15 #define PIN_SPI_MOSI 15
#define PIN_SPI_SCK 16 #define PIN_SPI_SCK 16
#define BUTTON_PIN PIN_BUTTON1 #define BUTTON_PIN PIN_BUTTON1
#define BUTTON_PIN_ALT PIN_BUTTON2 #define BUTTON_PIN_ALT PIN_BUTTON2
#endif