ThinkNode G3, ETH support WIP

src/DebugConfiguration.h

@@ -13,6 +13,11 @@ extern MemGet memGet;
 #define LED_STATE_ON 1
 #endif
 
+// WIFI LED
+#ifndef WIFI_STATE_ON
+#define WIFI_STATE_ON 1
+#endif
+
 // -----------------------------------------------------------------------------
 // DEBUG
 // -----------------------------------------------------------------------------
@@ -147,7 +152,9 @@ extern "C" void logLegacy(const char *level, const char *fmt, ...);
 // Default Bluetooth PIN
 #define defaultBLEPin 123456
 
-#if HAS_ETHERNET && !defined(USE_WS5500)
+#if HAS_ETHERNET && defined(USE_CH390D)
+#include <ESP32_CH390.h>
+#elif HAS_ETHERNET && !defined(USE_WS5500)
 #include <RAK13800_W5100S.h>
 #endif // HAS_ETHERNET
 

src/main.cpp

@@ -323,7 +323,7 @@ void setup()
 
 #ifdef WIFI_LED
     pinMode(WIFI_LED, OUTPUT);
-    digitalWrite(WIFI_LED, LOW);
+    digitalWrite(WIFI_LED, HIGH ^ WIFI_STATE_ON);
 #endif
 
 #ifdef BLE_LED

src/mesh/InterfacesTemplates.cpp

@@ -25,7 +25,7 @@ template class LR11x0Interface<LR1121>;
 template class SX126xInterface<STM32WLx>;
 #endif
 
-#if HAS_ETHERNET && !defined(USE_WS5500)
+#if HAS_ETHERNET && !defined(USE_WS5500) && !defined(USE_CH390D)
 #include "api/ethServerAPI.h"
 template class ServerAPI<EthernetClient>;
 template class APIServerPort<ethServerAPI, EthernetServer>;

src/mesh/api/ethServerAPI.cpp

@@ -1,7 +1,7 @@
 #include "configuration.h"
 #include <Arduino.h>
 
-#if HAS_ETHERNET && !defined(USE_WS5500)
+#if HAS_ETHERNET && !defined(USE_WS5500) && !defined(USE_CH390D)
 
 #include "ethServerAPI.h"
 

src/mesh/api/ethServerAPI.h

@@ -1,7 +1,7 @@
 #pragma once
 
 #include "ServerAPI.h"
-#ifndef USE_WS5500
+#if !defined(USE_WS5500) && !defined(USE_CH390D)
 #include <RAK13800_W5100S.h>
 
 /**

src/mesh/wifi/WiFiAPClient.cpp

@@ -354,13 +354,13 @@ static void WiFiEvent(WiFiEvent_t event)
     case ARDUINO_EVENT_WIFI_STA_CONNECTED:
         LOG_INFO("Connected to access point");
 #ifdef WIFI_LED
-        digitalWrite(WIFI_LED, HIGH);
+        digitalWrite(WIFI_LED, LOW ^ WIFI_STATE_ON);
 #endif
         break;
     case ARDUINO_EVENT_WIFI_STA_DISCONNECTED:
         LOG_INFO("Disconnected from WiFi access point");
 #ifdef WIFI_LED
-        digitalWrite(WIFI_LED, LOW);
+        digitalWrite(WIFI_LED, HIGH ^ WIFI_STATE_ON);
 #endif
         if (!isReconnecting) {
             WiFi.disconnect(false, true);
@@ -411,13 +411,13 @@ static void WiFiEvent(WiFiEvent_t event)
     case ARDUINO_EVENT_WIFI_AP_START:
         LOG_INFO("WiFi access point started");
 #ifdef WIFI_LED
-        digitalWrite(WIFI_LED, HIGH);
+        digitalWrite(WIFI_LED, LOW ^ WIFI_STATE_ON);
 #endif
         break;
     case ARDUINO_EVENT_WIFI_AP_STOP:
         LOG_INFO("WiFi access point stopped");
 #ifdef WIFI_LED
-        digitalWrite(WIFI_LED, LOW);
+        digitalWrite(WIFI_LED, HIGH ^ WIFI_STATE_ON);
 #endif
         break;
     case ARDUINO_EVENT_WIFI_AP_STACONNECTED:

src/modules/AdminModule.cpp

@@ -1180,7 +1180,7 @@ void AdminModule::handleGetDeviceConnectionStatus(const meshtastic_MeshPacket &r
     }
 #endif
 
-#if HAS_ETHERNET && !defined(USE_WS5500)
+#if HAS_ETHERNET && !defined(USE_WS5500) && !defined(USE_CH390D)
     conn.has_ethernet = true;
     conn.ethernet.has_status = true;
     if (Ethernet.linkStatus() == LinkON) {

src/mqtt/MQTT.h

@@ -15,7 +15,7 @@
 #include <WiFiClientSecure.h>
 #endif
 #endif
-#if HAS_ETHERNET && !defined(USE_WS5500)
+#if HAS_ETHERNET && !defined(USE_WS5500) && !defined(USE_CH390D)
 #include <EthernetClient.h>
 #endif
 

variants/esp32s3/ELECROW-ThinkNode-G3/pins_arduino.h

@@ -0,0 +1,26 @@
+#ifndef Pins_Arduino_h
+#define Pins_Arduino_h
+
+#include <stdint.h>
+
+#define USB_VID 0x303a
+#define USB_PID 0x1001
+
+// The default Wire will be mapped to PMU and RTC
+static const uint8_t SDA = 17;
+static const uint8_t SCL = 18;
+
+// Default SPI will be mapped to Radio
+static const uint8_t SS = 39;
+static const uint8_t MOSI = 40;
+static const uint8_t MISO = 41;
+static const uint8_t SCK = 42;
+
+// #define SPI_MOSI (11)
+// #define SPI_SCK (10)
+// #define SPI_MISO (9)
+// #define SPI_CS (12)
+
+// #define SDCARD_CS SPI_CS
+
+#endif /* Pins_Arduino_h */

variants/esp32s3/ELECROW-ThinkNode-G3/platformio.ini

@@ -0,0 +1,22 @@
+[env:thinknode_g3]
+extends = esp32s3_base
+board = ESP32-S3-WROOM-1-N4
+board_build.psram_type = opi
+
+build_flags = 
+  ${esp32s3_base.build_flags}
+  -D ELECROW_ThinkNode_G3
+  -D HAS_UDP_MULTICAST=1
+  -D BOARD_HAS_PSRAM
+  -D PRIVATE_HW
+#  -D CONFIG_ETH_ENABLED=1
+#  -D CONFIG_ETH_USE_ESP32_EMAC=1
+  -I variants/esp32s3/ELECROW-ThinkNode-G3
+  -mfix-esp32-psram-cache-issue
+
+lib_ignore = 
+    Ethernet
+
+lib_deps = 
+  ${esp32s3_base.lib_deps}
+#  file://../ESP32-CH390/ESP32-CH390-1.0.1.tar.gz

variants/esp32s3/ELECROW-ThinkNode-G3/variant.h

@@ -0,0 +1,36 @@
+#define HAS_GPS 0
+#define HAS_WIRE 0
+#define I2C_NO_RESCAN
+
+#define WIFI_LED 5
+#define WIFI_STATE_ON 0
+
+#define LED_PIN 6 // The blue LORA LED
+#define LED_STATE_ON 0
+#define BUTTON_PIN 4 // the external user button of the device, BOOT and RESET are not accessible without opening it up.
+
+#define USE_SX1262
+#define LORA_SCK 42
+#define LORA_MISO 41
+#define LORA_MOSI 40
+#define LORA_CS 39
+#define LORA_RESET 21
+
+#define SX126X_CS LORA_CS
+#define SX126X_DIO1 15
+#define SX126X_BUSY 47
+#define SX126X_RESET LORA_RESET
+#define SX126X_DIO2_AS_RF_SWITCH
+#define SX126X_DIO3_TCXO_VOLTAGE 1.8
+#define PIN_POWER_EN 45
+
+// #define HAS_ETHERNET 1
+// #define USE_CH390D 1 // this driver uses the same stack as the ESP32 Wifi driver
+
+// #define ETH_MISO_PIN 47
+// #define ETH_MOSI_PIN 21
+// #define ETH_SCLK_PIN 48
+// #define ETH_CS_PIN 45
+// #define ETH_INT_PIN 14
+// #define ETH_RST_PIN -1
+// #define ETH_ADDR 1