diff --git a/.github/pull_request_template.md b/.github/pull_request_template.md index 512dea311..6ccb4a105 100644 --- a/.github/pull_request_template.md +++ b/.github/pull_request_template.md @@ -1,9 +1,9 @@ +### ❌ (Please delete all these tips and replace them with your text) ❌ + ## Thank you for sending in a pull request, here's some tips to get started! -(Please delete all these tips and replace with your text) - - Before starting on some new big chunk of code, it it is optional but highly recommended to open an issue first - to say "hey, I think this idea X should be implemented and I'm starting work on it. My general plan is Y, any feedback + to say "Hey, I think this idea X should be implemented and I'm starting work on it. My general plan is Y, any feedback is appreciated." This will allow other devs to potentially save you time by not accidentially duplicating work etc... - Please do not check in files that don't have real changes - Please do not reformat lines that you didn't have to change the code on @@ -12,3 +12,4 @@ - If your PR fixes a bug, mention "fixes #bugnum" somewhere in your pull request description. - If your other co-developers have comments on your PR please tweak as needed. - Please also enable "Allow edits by maintainers". +- If your PR gets accepted you can request a "Contributor" role in the Meshtastic Discord diff --git a/CONTRIBUTING.md b/CONTRIBUTING.md new file mode 100644 index 000000000..f579a7fe0 --- /dev/null +++ b/CONTRIBUTING.md @@ -0,0 +1,47 @@ +# Contributing to Meshtastic Firmware + +We're excited that you're interested in contributing to the Meshtastic firmware! This document provides a high-level overview of how you can get involved. + +## Important First Steps + +Before you begin, please: + +1. **Read our documentation**: Our [official documentation](https://meshtastic.org/docs/) is a crucial resource. It contains essential information about the project. + +2. **Check out the firmware build guide**: For specific instructions on setting up your development environment and building the firmware, refer to our [Firmware Build Guide](https://meshtastic.org/docs/development/firmware/build/). + +3. Read our [Code of Conduct](https://meshtastic.org/docs/legal/conduct/) + +4. Join our [Discord community](https://discord.com/invite/ktMAKGBnBs) to connect with developers and other contributors to get help. + +## Getting Help and Discussing Ideas + +We encourage open communication and discussion before diving into code changes: + +1. **Use GitHub Discussions**: For new ideas, questions, or to discuss potential changes, start a conversation in our [GitHub Discussions](https://github.com/meshtastic/firmware/discussions) first. This helps us collaborate and avoid duplicate work. + +2. **Join our Discord**: For real-time chat and quick questions, join our [Discord server](https://discord.com/invite/ktMAKGBnBs). It's a great place to get help and connect with other developers and the community. + +3. **Reporting Issues**: If you've identified a bug, please use our bug report template when creating a new issue in the [issue tracker](https://github.com/meshtastic/firmware/issues). Ensure you've searched existing issues to avoid duplicates. + +## Making Contributions + +> [!IMPORTANT] +> Before making any contributions, you must sign our Contributor License Agreement (CLA). You can do this by visiting https://cla-assistant.io/meshtastic/firmware. Be sure to use the GitHub account you will use to submit your contributions when signing. + +1. Fork the repository +2. Create a new branch for your feature or bug fix +3. Make your changes +4. Test your changes thoroughly +5. Create a pull request with a clear description, using the provided template, of your changes. Be sure to enable "Allow edits from maintainers". + +## Coding Standards + +To ensure consistent code formatting across the project: + +1. Install the [Trunk](https://marketplace.visualstudio.com/items?itemName=Trunk.io) extension for Visual Studio Code. +2. Before submitting your changes, run `trunk fmt` to automatically format your code according to our standards. + +Adhering to these formatting guidelines helps maintain code consistency and makes the review process smoother. + +Thank you for contributing to Meshtastic! diff --git a/boards/seeed-sensecap-indicator.json b/boards/seeed-sensecap-indicator.json new file mode 100644 index 000000000..3fc57126f --- /dev/null +++ b/boards/seeed-sensecap-indicator.json @@ -0,0 +1,42 @@ +{ + "build": { + "arduino": { + "ldscript": "esp32s3_out.ld", + "partitions": "default_8MB.csv", + "memory_type": "qio_opi" + }, + "core": "esp32", + "extra_flags": [ + "-DBOARD_HAS_PSRAM", + "-DARDUINO_USB_CDC_ON_BOOT=0", + "-DARDUINO_USB_MODE=1", + "-DARDUINO_RUNNING_CORE=1", + "-DARDUINO_EVENT_RUNNING_CORE=1" + ], + "f_cpu": "240000000L", + "f_flash": "80000000L", + "flash_mode": "qio", + "hwids": [["0x1A86", "0x7523"]], + "mcu": "esp32s3", + "variant": "esp32s3r8" + }, + "connectivity": ["wifi", "bluetooth", "lora"], + "debug": { + "default_tool": "esp-builtin", + "onboard_tools": ["esp-builtin"], + "openocd_target": "esp32s3.cfg" + }, + "frameworks": ["arduino"], + "name": "Seeed Studio SenseCAP Indicator", + "upload": { + "flash_size": "8MB", + "maximum_ram_size": 327680, + "maximum_size": 8388608, + "require_upload_port": true, + "use_1200bps_touch": true, + "wait_for_upload_port": true, + "speed": 921600 + }, + "url": "https://www.seeedstudio.com/Indicator-for-Meshtastic.html", + "vendor": "Seeed Studio" +} diff --git a/platformio.ini b/platformio.ini index 5121a5665..668496567 100644 --- a/platformio.ini +++ b/platformio.ini @@ -161,4 +161,5 @@ lib_deps = mprograms/QMC5883LCompass@^1.2.0 - https://github.com/meshtastic/DFRobot_LarkWeatherStation#dee914270dc7cb3e43fbf034edd85a63a16a12ee \ No newline at end of file + https://github.com/meshtastic/DFRobot_LarkWeatherStation#dee914270dc7cb3e43fbf034edd85a63a16a12ee + https://github.com/gjelsoe/STK8xxx-Accelerometer.git#v0.1.1 \ No newline at end of file diff --git a/protobufs b/protobufs index 5f7c91adb..0acaec6ef 160000 --- a/protobufs +++ b/protobufs @@ -1 +1 @@ -Subproject commit 5f7c91adb97187e0cb2140de7057344d93444bd1 +Subproject commit 0acaec6eff00e748beeae89148093221f131cd9c diff --git a/src/AccelerometerThread.h b/src/AccelerometerThread.h index c2910007e..629d63c6a 100644 --- a/src/AccelerometerThread.h +++ b/src/AccelerometerThread.h @@ -11,6 +11,9 @@ #include #include #include +#ifdef STK8XXX_INT +#include +#endif #include #include #include @@ -24,6 +27,8 @@ #define ACCELEROMETER_CHECK_INTERVAL_MS 100 #define ACCELEROMETER_CLICK_THRESHOLD 40 +volatile static bool STK_IRQ; + static inline int readRegister(uint8_t address, uint8_t reg, uint8_t *data, uint8_t len) { Wire.beginTransmission(address); @@ -79,6 +84,11 @@ class AccelerometerThread : public concurrency::OSThread if (acceleremoter_type == ScanI2C::DeviceType::MPU6050 && mpu.getMotionInterruptStatus()) { wakeScreen(); + } else if (acceleremoter_type == ScanI2C::DeviceType::STK8BAXX && STK_IRQ) { + STK_IRQ = false; + if (config.display.wake_on_tap_or_motion) { + wakeScreen(); + } } else if (acceleremoter_type == ScanI2C::DeviceType::LIS3DH && lis.getClick() > 0) { uint8_t click = lis.getClick(); if (!config.device.double_tap_as_button_press) { @@ -188,6 +198,15 @@ class AccelerometerThread : public concurrency::OSThread mpu.setMotionDetectionDuration(20); mpu.setInterruptPinLatch(true); // Keep it latched. Will turn off when reinitialized. mpu.setInterruptPinPolarity(true); +#ifdef STK8XXX_INT + } else if (acceleremoter_type == ScanI2C::DeviceType::STK8BAXX && stk8baxx.STK8xxx_Initialization(STK8xxx_VAL_RANGE_2G)) { + STK_IRQ = false; + LOG_DEBUG("STX8BAxx initialized\n"); + stk8baxx.STK8xxx_Anymotion_init(); + pinMode(STK8XXX_INT, INPUT_PULLUP); + attachInterrupt( + digitalPinToInterrupt(STK8XXX_INT), [] { STK_IRQ = true; }, RISING); +#endif } else if (acceleremoter_type == ScanI2C::DeviceType::LIS3DH && lis.begin(accelerometer_found.address)) { LOG_DEBUG("LIS3DH initializing\n"); lis.setRange(LIS3DH_RANGE_2_G); @@ -262,6 +281,9 @@ class AccelerometerThread : public concurrency::OSThread ScanI2C::DeviceType acceleremoter_type; Adafruit_MPU6050 mpu; Adafruit_LIS3DH lis; +#ifdef STK8XXX_INT + STK8xxx stk8baxx; +#endif Adafruit_LSM6DS3TRC lsm; SensorBMA423 bmaSensor; bool BMA_IRQ = false; diff --git a/src/DebugConfiguration.cpp b/src/DebugConfiguration.cpp index 23b140daf..1c081ae29 100644 --- a/src/DebugConfiguration.cpp +++ b/src/DebugConfiguration.cpp @@ -97,12 +97,14 @@ Syslog &Syslog::logMask(uint8_t priMask) void Syslog::enable() { + this->_client->begin(this->_port); this->_enabled = true; } void Syslog::disable() { this->_enabled = false; + this->_client->stop(); } bool Syslog::isEnabled() @@ -193,4 +195,4 @@ inline bool Syslog::_sendLog(uint16_t pri, const char *appName, const char *mess return true; } -#endif \ No newline at end of file +#endif diff --git a/src/configuration.h b/src/configuration.h index 047dbd727..72420cc59 100644 --- a/src/configuration.h +++ b/src/configuration.h @@ -144,6 +144,7 @@ along with this program. If not, see . // ACCELEROMETER // ----------------------------------------------------------------------------- #define MPU6050_ADDR 0x68 +#define STK8BXX_ADR 0x18 #define LIS3DH_ADR 0x18 #define BMA423_ADDR 0x19 #define LSM6DS3_ADDR 0x6A @@ -162,6 +163,7 @@ along with this program. If not, see . // ----------------------------------------------------------------------------- // IO Expander // ----------------------------------------------------------------------------- +#define TCA9535_ADDR 0x20 #define TCA9555_ADDR 0x26 // ----------------------------------------------------------------------------- @@ -171,6 +173,11 @@ along with this program. If not, see . #define GPS_THREAD_INTERVAL 200 #endif +// ----------------------------------------------------------------------------- +// Touchscreen +// ----------------------------------------------------------------------------- +#define FT6336U_ADDR 0x48 + // convert 24-bit color to 16-bit (56K) #define COLOR565(r, g, b) (((r & 0xF8) << 8) | ((g & 0xFC) << 3) | ((b & 0xF8) >> 3)) diff --git a/src/detect/ScanI2C.cpp b/src/detect/ScanI2C.cpp index 73bdf973b..eaba62a78 100644 --- a/src/detect/ScanI2C.cpp +++ b/src/detect/ScanI2C.cpp @@ -37,8 +37,8 @@ ScanI2C::FoundDevice ScanI2C::firstKeyboard() const ScanI2C::FoundDevice ScanI2C::firstAccelerometer() const { - ScanI2C::DeviceType types[] = {MPU6050, LIS3DH, BMA423, LSM6DS3, BMX160}; - return firstOfOrNONE(5, types); + ScanI2C::DeviceType types[] = {MPU6050, LIS3DH, BMA423, LSM6DS3, BMX160, STK8BAXX}; + return firstOfOrNONE(6, types); } ScanI2C::FoundDevice ScanI2C::find(ScanI2C::DeviceType) const diff --git a/src/detect/ScanI2C.h b/src/detect/ScanI2C.h index 0a5b360de..743de7a9a 100644 --- a/src/detect/ScanI2C.h +++ b/src/detect/ScanI2C.h @@ -42,6 +42,7 @@ class ScanI2C BMA423, BQ24295, LSM6DS3, + TCA9535, TCA9555, VEML7700, RCWL9620, @@ -52,7 +53,9 @@ class ScanI2C AHT10, BMX160, DFROBOT_LARK, - NAU7802 + NAU7802, + FT6336U, + STK8BAXX } DeviceType; // typedef uint8_t DeviceAddress; diff --git a/src/detect/ScanI2CTwoWire.cpp b/src/detect/ScanI2CTwoWire.cpp index 21e7ca8ac..48341034b 100644 --- a/src/detect/ScanI2CTwoWire.cpp +++ b/src/detect/ScanI2CTwoWire.cpp @@ -313,17 +313,34 @@ void ScanI2CTwoWire::scanPort(I2CPort port, uint8_t *address, uint8_t asize) } break; case MCP9808_ADDR: - registerValue = getRegisterValue(ScanI2CTwoWire::RegisterLocation(addr, 0x07), 2); - if (registerValue == 0x0400) { - type = MCP9808; - LOG_INFO("MCP9808 sensor found\n"); - } else { - type = LIS3DH; - LOG_INFO("LIS3DH accelerometer found\n"); + // We need to check for STK8BAXX first, since register 0x07 is new data flag for the z-axis and can produce some + // weird result. and register 0x00 doesn't seems to be colliding with MCP9808 and LIS3DH chips. + { + // Check register 0x00 for 0x8700 response to ID STK8BA53 chip. + registerValue = getRegisterValue(ScanI2CTwoWire::RegisterLocation(addr, 0x00), 2); + if (registerValue == 0x8700) { + type = STK8BAXX; + LOG_INFO("STK8BAXX accelerometer found\n"); + break; + } + + // Check register 0x07 for 0x0400 response to ID MCP9808 chip. + registerValue = getRegisterValue(ScanI2CTwoWire::RegisterLocation(addr, 0x07), 2); + if (registerValue == 0x0400) { + type = MCP9808; + LOG_INFO("MCP9808 sensor found\n"); + break; + } + + // Check register 0x0F for 0x3300 response to ID LIS3DH chip. + registerValue = getRegisterValue(ScanI2CTwoWire::RegisterLocation(addr, 0x0F), 2); + if (registerValue == 0x3300) { + type = LIS3DH; + LOG_INFO("LIS3DH accelerometer found\n"); + } + + break; } - - break; - case SHT31_4x_ADDR: registerValue = getRegisterValue(ScanI2CTwoWire::RegisterLocation(addr, 0x89), 2); if (registerValue == 0x11a2 || registerValue == 0x11da || registerValue == 0xe9c) { @@ -371,12 +388,14 @@ void ScanI2CTwoWire::scanPort(I2CPort port, uint8_t *address, uint8_t asize) SCAN_SIMPLE_CASE(BMX160_ADDR, BMX160, "BMX160 accelerometer found\n"); SCAN_SIMPLE_CASE(BMA423_ADDR, BMA423, "BMA423 accelerometer found\n"); SCAN_SIMPLE_CASE(LSM6DS3_ADDR, LSM6DS3, "LSM6DS3 accelerometer found at address 0x%x\n", (uint8_t)addr.address); + SCAN_SIMPLE_CASE(TCA9535_ADDR, TCA9535, "TCA9535 I2C expander found\n"); SCAN_SIMPLE_CASE(TCA9555_ADDR, TCA9555, "TCA9555 I2C expander found\n"); SCAN_SIMPLE_CASE(VEML7700_ADDR, VEML7700, "VEML7700 light sensor found\n"); SCAN_SIMPLE_CASE(TSL25911_ADDR, TSL2591, "TSL2591 light sensor found\n"); SCAN_SIMPLE_CASE(OPT3001_ADDR, OPT3001, "OPT3001 light sensor found\n"); SCAN_SIMPLE_CASE(MLX90632_ADDR, MLX90632, "MLX90632 IR temp sensor found\n"); SCAN_SIMPLE_CASE(NAU7802_ADDR, NAU7802, "NAU7802 based scale found\n"); + SCAN_SIMPLE_CASE(FT6336U_ADDR, FT6336U, "FT6336U touchscreen found\n"); default: LOG_INFO("Device found at address 0x%x was not able to be enumerated\n", addr.address); diff --git a/src/gps/GPS.cpp b/src/gps/GPS.cpp index 12ef34c52..046f277ff 100644 --- a/src/gps/GPS.cpp +++ b/src/gps/GPS.cpp @@ -166,18 +166,21 @@ GPS_RESPONSE GPS::getACK(const char *message, uint32_t waitMillis) b = _serial_gps->read(); #ifdef GPS_DEBUG - LOG_DEBUG("%02X", (char *)buffer); + LOG_DEBUG("%c", (b >= 32 && b <= 126) ? b : '.'); #endif buffer[bytesRead] = b; bytesRead++; if ((bytesRead == 767) || (b == '\r')) { if (strnstr((char *)buffer, message, bytesRead) != nullptr) { #ifdef GPS_DEBUG - LOG_DEBUG("\r"); + LOG_DEBUG("\r\nFound: %s\r\n", message); // Log the found message #endif return GNSS_RESPONSE_OK; } else { bytesRead = 0; +#ifdef GPS_DEBUG + LOG_DEBUG("\r\n"); +#endif } } } @@ -505,21 +508,21 @@ bool GPS::setup() delay(250); _serial_gps->write("$CFGMSG,6,1,0\r\n"); delay(250); - } else if (gnssModel == GNSS_MODEL_AG3335) { + } else if (gnssModel == GNSS_MODEL_AG3335 || gnssModel == GNSS_MODEL_AG3352) { - _serial_gps->write("$PAIR066,1,0,1,0,0,1*3B"); // Enable GPS+GALILEO+NAVIC + _serial_gps->write("$PAIR066,1,0,1,0,0,1*3B\r\n"); // Enable GPS+GALILEO+NAVIC // Configure NMEA (sentences will output once per fix) - _serial_gps->write("$PAIR062,0,0*3F"); // GGA ON - _serial_gps->write("$PAIR062,1,0*3F"); // GLL OFF - _serial_gps->write("$PAIR062,2,1*3D"); // GSA ON - _serial_gps->write("$PAIR062,3,0*3D"); // GSV OFF - _serial_gps->write("$PAIR062,4,0*3B"); // RMC ON - _serial_gps->write("$PAIR062,5,0*3B"); // VTG OFF - _serial_gps->write("$PAIR062,6,1*39"); // ZDA ON + _serial_gps->write("$PAIR062,0,1*3F\r\n"); // GGA ON + _serial_gps->write("$PAIR062,1,0*3F\r\n"); // GLL OFF + _serial_gps->write("$PAIR062,2,0*3C\r\n"); // GSA OFF + _serial_gps->write("$PAIR062,3,0*3D\r\n"); // GSV OFF + _serial_gps->write("$PAIR062,4,1*3B\r\n"); // RMC ON + _serial_gps->write("$PAIR062,5,0*3B\r\n"); // VTG OFF + _serial_gps->write("$PAIR062,6,0*38\r\n"); // ZDA ON delay(250); - _serial_gps->write("$PAIR513*3D"); // save configuration + _serial_gps->write("$PAIR513*3D\r\n"); // save configuration } else if (gnssModel == GNSS_MODEL_UBLOX) { // Configure GNSS system to GPS+SBAS+GLONASS (Module may restart after this command) @@ -1019,7 +1022,7 @@ void GPS::down() LOG_DEBUG("%us until next search\n", sleepTime / 1000); // If update interval less than 10 seconds, no attempt to sleep - if (updateInterval <= 10 * 1000UL) + if (updateInterval <= 10 * 1000UL || sleepTime == 0) setPowerState(GPS_IDLE); else { @@ -1184,6 +1187,15 @@ int GPS::prepareDeepSleep(void *unused) return 0; } +#define PROBE_SIMPLE(CHIP, TOWRITE, RESPONSE, DRIVER, TIMEOUT, ...) \ + LOG_DEBUG("Trying " TOWRITE " (" CHIP ") ...\n"); \ + clearBuffer(); \ + _serial_gps->write(TOWRITE "\r\n"); \ + if (getACK(RESPONSE, TIMEOUT) == GNSS_RESPONSE_OK) { \ + LOG_INFO(CHIP " detected, using " #DRIVER " Module\n"); \ + return DRIVER; \ + } + GnssModel_t GPS::probe(int serialSpeed) { #if defined(ARCH_NRF52) || defined(ARCH_PORTDUINO) || defined(ARCH_RP2040) || defined(ARCH_STM32WL) @@ -1195,14 +1207,7 @@ GnssModel_t GPS::probe(int serialSpeed) _serial_gps->updateBaudRate(serialSpeed); } #endif -#ifdef GNSS_AIROHA - return GNSS_MODEL_AG3335; -#endif -#ifdef GPS_DEBUG - for (int i = 0; i < 20; i++) { - getACK("$GP", 200); - } -#endif + memset(&info, 0, sizeof(struct uBloxGnssModelInfo)); uint8_t buffer[768] = {0}; delay(100); @@ -1211,70 +1216,29 @@ GnssModel_t GPS::probe(int serialSpeed) _serial_gps->write("$PCAS03,0,0,0,0,0,0,0,0,0,0,,,0,0*02\r\n"); delay(20); - // get version information from Unicore UFirebirdII Series - // Works for: UC6580, UM620, UM621, UM670A, UM680A, or UM681A - _serial_gps->write("$PDTINFO\r\n"); - delay(750); - if (getACK("UC6580", 500) == GNSS_RESPONSE_OK) { - LOG_INFO("UC6580 detected, using UC6580 Module\n"); - return GNSS_MODEL_UC6580; - } - - clearBuffer(); - _serial_gps->write("$PDTINFO\r\n"); - delay(750); - if (getACK("UM600", 500) == GNSS_RESPONSE_OK) { - LOG_INFO("UM600 detected, using UC6580 Module\n"); - return GNSS_MODEL_UC6580; - } - - // Get version information for ATGM336H - clearBuffer(); - _serial_gps->write("$PCAS06,1*1A\r\n"); - if (getACK("$GPTXT,01,01,02,HW=ATGM336H", 500) == GNSS_RESPONSE_OK) { - LOG_INFO("ATGM336H GNSS init succeeded, using ATGM336H Module\n"); - return GNSS_MODEL_ATGM336H; - } - + // Unicore UFirebirdII Series: UC6580, UM620, UM621, UM670A, UM680A, or UM681A + PROBE_SIMPLE("UC6580", "$PDTINFO", "UC6580", GNSS_MODEL_UC6580, 500); + PROBE_SIMPLE("UM600", "$PDTINFO", "UM600", GNSS_MODEL_UC6580, 500); + PROBE_SIMPLE("ATGM336H", "$PCAS06,1*1A", "$GPTXT,01,01,02,HW=ATGM336H", GNSS_MODEL_ATGM336H, 500); /* ATGM332D series (-11(GPS), -21(BDS), -31(GPS+BDS), -51(GPS+GLONASS), -71-0(GPS+BDS+GLONASS)) based on AT6558 */ - clearBuffer(); - _serial_gps->write("$PCAS06,1*1A\r\n"); - if (getACK("$GPTXT,01,01,02,HW=ATGM332D", 500) == GNSS_RESPONSE_OK) { - LOG_INFO("ATGM332D detected, using ATGM336H Module\n"); - return GNSS_MODEL_ATGM336H; - } + PROBE_SIMPLE("ATGM332D", "$PCAS06,1*1A", "$GPTXT,01,01,02,HW=ATGM332D", GNSS_MODEL_ATGM336H, 500); /* Airoha (Mediatek) AG3335A/M/S, A3352Q, Quectel L89 2.0, SimCom SIM65M */ - clearBuffer(); - _serial_gps->write("PAIR020*38\r\n"); - if (getACK("$PAIR020,AG3335", 500) == GNSS_RESPONSE_OK) { - LOG_INFO("Aioha AG3335 detected, using AG3335 Module\n"); - return GNSS_MODEL_AG3335; - } - // Get version information for Airoha AG3335 - clearBuffer(); - _serial_gps->write("$PMTK605*31\r\n"); + _serial_gps->write("$PAIR062,2,0*3C\r\n"); // GSA OFF to reduce volume + _serial_gps->write("$PAIR062,3,0*3D\r\n"); // GSV OFF to reduce volume + _serial_gps->write("$PAIR513*3D\r\n"); // save configuration + PROBE_SIMPLE("AG3335", "$PAIR021*39", "$PAIR021,AG3335", GNSS_MODEL_AG3335, 500); + PROBE_SIMPLE("AG3352", "$PAIR021*39", "$PAIR021,AG3352", GNSS_MODEL_AG3352, 500); + PROBE_SIMPLE("LC86", "$PQTMVERNO*58", "$PQTMVERNO,LC86", GNSS_MODEL_AG3352, 500); - // Get version information - clearBuffer(); - _serial_gps->write("$PCAS06,0*1B\r\n"); - if (getACK("$GPTXT,01,01,02,SW=", 500) == GNSS_RESPONSE_OK) { - LOG_INFO("L76K GNSS init succeeded, using L76K GNSS Module\n"); - return GNSS_MODEL_MTK; - } + PROBE_SIMPLE("L76K", "$PCAS06,0*1B", "$GPTXT,01,01,02,SW=", GNSS_MODEL_MTK, 500); // Close all NMEA sentences, valid for L76B MTK platform (Waveshare Pico GPS) _serial_gps->write("$PMTK514,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0*2E\r\n"); delay(20); - // Get version information - clearBuffer(); - _serial_gps->write("$PMTK605*31\r\n"); - if (getACK("Quectel-L76B", 500) == GNSS_RESPONSE_OK) { - LOG_INFO("L76B GNSS init succeeded, using L76B GNSS Module\n"); - return GNSS_MODEL_MTK_L76B; - } + PROBE_SIMPLE("L76B", "$PMTK605*31", "Quectel-L76B", GNSS_MODEL_MTK_L76B, 500); uint8_t cfg_rate[] = {0xB5, 0x62, 0x06, 0x08, 0x00, 0x00, 0x00, 0x00}; UBXChecksum(cfg_rate, sizeof(cfg_rate)); diff --git a/src/gps/GPS.h b/src/gps/GPS.h index c0e9fb8b6..caff48f32 100644 --- a/src/gps/GPS.h +++ b/src/gps/GPS.h @@ -30,7 +30,8 @@ typedef enum { GNSS_MODEL_UC6580, GNSS_MODEL_UNKNOWN, GNSS_MODEL_MTK_L76B, - GNSS_MODEL_AG3335 + GNSS_MODEL_AG3335, + GNSS_MODEL_AG3352 } GnssModel_t; typedef enum { @@ -297,7 +298,6 @@ class GPS : private concurrency::OSThread virtual int32_t runOnce() override; // Get GNSS model - String getNMEA(); GnssModel_t probe(int serialSpeed); // delay counter to allow more sats before fixed position stops GPS thread @@ -310,4 +310,4 @@ class GPS : private concurrency::OSThread }; extern GPS *gps; -#endif // Exclude GPS \ No newline at end of file +#endif // Exclude GPS diff --git a/src/gps/RTC.cpp b/src/gps/RTC.cpp index 070038672..c056bb9e4 100644 --- a/src/gps/RTC.cpp +++ b/src/gps/RTC.cpp @@ -43,7 +43,10 @@ void readFromRTC() t.tm_sec = rtc.getSecond(); tv.tv_sec = gm_mktime(&t); tv.tv_usec = 0; - LOG_DEBUG("Read RTC time from RV3028 as %ld\n", tv.tv_sec); + + uint32_t printableEpoch = tv.tv_sec; // Print lib only supports 32 bit but time_t can be 64 bit on some platforms + LOG_DEBUG("Read RTC time from RV3028 getTime as %02d-%02d-%02d %02d:%02d:%02d (%ld)\n", t.tm_year + 1900, t.tm_mon + 1, + t.tm_mday, t.tm_hour, t.tm_min, t.tm_sec, printableEpoch); timeStartMsec = now; zeroOffsetSecs = tv.tv_sec; if (currentQuality == RTCQualityNone) { @@ -71,7 +74,10 @@ void readFromRTC() t.tm_sec = tc.second; tv.tv_sec = gm_mktime(&t); tv.tv_usec = 0; - LOG_DEBUG("Read RTC time from PCF8563 as %ld\n", tv.tv_sec); + + uint32_t printableEpoch = tv.tv_sec; // Print lib only supports 32 bit but time_t can be 64 bit on some platforms + LOG_DEBUG("Read RTC time from PCF8563 getDateTime as %02d-%02d-%02d %02d:%02d:%02d (%ld)\n", t.tm_year + 1900, + t.tm_mon + 1, t.tm_mday, t.tm_hour, t.tm_min, t.tm_sec, printableEpoch); timeStartMsec = now; zeroOffsetSecs = tv.tv_sec; if (currentQuality == RTCQualityNone) { @@ -81,7 +87,8 @@ void readFromRTC() #else if (!gettimeofday(&tv, NULL)) { uint32_t now = millis(); - LOG_DEBUG("Read RTC time as %ld\n", tv.tv_sec); + uint32_t printableEpoch = tv.tv_sec; // Print lib only supports 32 bit but time_t can be 64 bit on some platforms + LOG_DEBUG("Read RTC time as %ld\n", printableEpoch); timeStartMsec = now; zeroOffsetSecs = tv.tv_sec; } @@ -101,6 +108,7 @@ bool perhapsSetRTC(RTCQuality q, const struct timeval *tv, bool forceUpdate) { static uint32_t lastSetMsec = 0; uint32_t now = millis(); + uint32_t printableEpoch = tv->tv_sec; // Print lib only supports 32 bit but time_t can be 64 bit on some platforms bool shouldSet; if (forceUpdate) { @@ -113,7 +121,7 @@ bool perhapsSetRTC(RTCQuality q, const struct timeval *tv, bool forceUpdate) } else if (q >= RTCQualityNTP && (now - lastSetMsec) > (12 * 60 * 60 * 1000UL)) { // Every 12 hrs we will slam in a new GPS or Phone GPS / NTP time, to correct for local RTC clock drift shouldSet = true; - LOG_DEBUG("Reapplying external time to correct clock drift %ld secs\n", tv->tv_sec); + LOG_DEBUG("Reapplying external time to correct clock drift %ld secs\n", printableEpoch); } else { shouldSet = false; LOG_DEBUG("Current RTC quality: %s. Ignoring time of RTC quality of %s\n", RtcName(currentQuality), RtcName(q)); @@ -140,8 +148,8 @@ bool perhapsSetRTC(RTCQuality q, const struct timeval *tv, bool forceUpdate) #endif tm *t = gmtime(&tv->tv_sec); rtc.setTime(t->tm_year + 1900, t->tm_mon + 1, t->tm_wday, t->tm_mday, t->tm_hour, t->tm_min, t->tm_sec); - LOG_DEBUG("RV3028_RTC setTime %02d-%02d-%02d %02d:%02d:%02d %ld\n", t->tm_year + 1900, t->tm_mon + 1, t->tm_mday, - t->tm_hour, t->tm_min, t->tm_sec, tv->tv_sec); + LOG_DEBUG("RV3028_RTC setTime %02d-%02d-%02d %02d:%02d:%02d (%ld)\n", t->tm_year + 1900, t->tm_mon + 1, t->tm_mday, + t->tm_hour, t->tm_min, t->tm_sec, printableEpoch); } #elif defined(PCF8563_RTC) if (rtc_found.address == PCF8563_RTC) { @@ -154,8 +162,8 @@ bool perhapsSetRTC(RTCQuality q, const struct timeval *tv, bool forceUpdate) #endif tm *t = gmtime(&tv->tv_sec); rtc.setDateTime(t->tm_year + 1900, t->tm_mon + 1, t->tm_mday, t->tm_hour, t->tm_min, t->tm_sec); - LOG_DEBUG("PCF8563_RTC setDateTime %02d-%02d-%02d %02d:%02d:%02d %ld\n", t->tm_year + 1900, t->tm_mon + 1, t->tm_mday, - t->tm_hour, t->tm_min, t->tm_sec, tv->tv_sec); + LOG_DEBUG("PCF8563_RTC setDateTime %02d-%02d-%02d %02d:%02d:%02d (%ld)\n", t->tm_year + 1900, t->tm_mon + 1, + t->tm_mday, t->tm_hour, t->tm_min, t->tm_sec, printableEpoch); } #elif defined(ARCH_ESP32) settimeofday(tv, NULL); @@ -272,4 +280,4 @@ time_t gm_mktime(struct tm *tm) #else return mktime(tm); #endif -} \ No newline at end of file +} diff --git a/src/graphics/Screen.cpp b/src/graphics/Screen.cpp index fe7fba2fa..eb2b10b4f 100644 --- a/src/graphics/Screen.cpp +++ b/src/graphics/Screen.cpp @@ -1117,8 +1117,8 @@ static void drawNodes(OLEDDisplay *display, int16_t x, int16_t y, const NodeStat { char usersString[20]; snprintf(usersString, sizeof(usersString), "%d/%d", nodeStatus->getNumOnline(), nodeStatus->getNumTotal()); -#if (defined(USE_EINK) || defined(ILI9341_DRIVER) || defined(ST7735_CS) || defined(ST7789_CS) || defined(USE_ST7789) || \ - defined(HX8357_CS)) && \ +#if (defined(USE_EINK) || defined(ILI9341_DRIVER) || defined(ST7701_CS) || defined(ST7735_CS) || defined(ST7789_CS) || \ + defined(USE_ST7789) || defined(HX8357_CS)) && \ !defined(DISPLAY_FORCE_SMALL_FONTS) display->drawFastImage(x, y + 3, 8, 8, imgUser); #else @@ -1539,7 +1539,8 @@ Screen::Screen(ScanI2C::DeviceAddress address, meshtastic_Config_DisplayConfig_O #elif defined(USE_SSD1306) dispdev = new SSD1306Wire(address.address, -1, -1, geometry, (address.port == ScanI2C::I2CPort::WIRE1) ? HW_I2C::I2C_TWO : HW_I2C::I2C_ONE); -#elif defined(ST7735_CS) || defined(ILI9341_DRIVER) || defined(ST7789_CS) || defined(RAK14014) || defined(HX8357_CS) +#elif defined(ST7735_CS) || defined(ILI9341_DRIVER) || defined(ST7701_CS) || defined(ST7789_CS) || defined(RAK14014) || \ + defined(HX8357_CS) dispdev = new TFTDisplay(address.address, -1, -1, geometry, (address.port == ScanI2C::I2CPort::WIRE1) ? HW_I2C::I2C_TWO : HW_I2C::I2C_ONE); #elif defined(USE_EINK) && !defined(USE_EINK_DYNAMICDISPLAY) @@ -1746,7 +1747,8 @@ void Screen::setup() // Standard behaviour is to FLIP the screen (needed on T-Beam). If this config item is set, unflip it, and thereby logically // flip it. If you have a headache now, you're welcome. if (!config.display.flip_screen) { -#if defined(ST7735_CS) || defined(ILI9341_DRIVER) || defined(ST7789_CS) || defined(RAK14014) || defined(HX8357_CS) +#if defined(ST7701_CS) || defined(ST7735_CS) || defined(ILI9341_DRIVER) || defined(ST7701_CS) || defined(ST7789_CS) || \ + defined(RAK14014) || defined(HX8357_CS) static_cast(dispdev)->flipScreenVertically(); #else dispdev->flipScreenVertically(); @@ -1805,6 +1807,11 @@ void Screen::forceDisplay(bool forceUiUpdate) #ifdef USE_EINK // If requested, make sure queued commands are run, and UI has rendered a new frame if (forceUiUpdate) { + // Force a display refresh, in addition to the UI update + // Changing the GPS status bar icon apparently doesn't register as a change in image + // (False negative of the image hashing algorithm used to skip identical frames) + EINK_ADD_FRAMEFLAG(dispdev, DEMAND_FAST); + // No delay between UI frame rendering setFastFramerate(); @@ -2454,8 +2461,8 @@ void DebugInfo::drawFrame(OLEDDisplay *display, OLEDDisplayUiState *state, int16 #ifdef ARCH_ESP32 if (millis() - storeForwardModule->lastHeartbeat > (storeForwardModule->heartbeatInterval * 1200)) { // no heartbeat, overlap a bit -#if (defined(USE_EINK) || defined(ILI9341_DRIVER) || defined(ST7735_CS) || defined(ST7789_CS) || defined(USE_ST7789) || \ - defined(HX8357_CS)) && \ +#if (defined(USE_EINK) || defined(ILI9341_DRIVER) || defined(ST7701_CS) || defined(ST7735_CS) || defined(ST7789_CS) || \ + defined(USE_ST7789) || defined(HX8357_CS)) && \ !defined(DISPLAY_FORCE_SMALL_FONTS) display->drawFastImage(x + SCREEN_WIDTH - 14 - display->getStringWidth(ourId), y + 3 + FONT_HEIGHT_SMALL, 12, 8, imgQuestionL1); @@ -2466,8 +2473,8 @@ void DebugInfo::drawFrame(OLEDDisplay *display, OLEDDisplayUiState *state, int16 imgQuestion); #endif } else { -#if (defined(USE_EINK) || defined(ILI9341_DRIVER) || defined(ST7735_CS) || defined(ST7789_CS) || defined(USE_ST7789) || \ - defined(HX8357_CS)) && \ +#if (defined(USE_EINK) || defined(ILI9341_DRIVER) || defined(ST7701_CS) || defined(ST7735_CS) || defined(ST7789_CS) || \ + defined(USE_ST7789) || defined(HX8357_CS)) && \ !defined(DISPLAY_FORCE_SMALL_FONTS) display->drawFastImage(x + SCREEN_WIDTH - 18 - display->getStringWidth(ourId), y + 3 + FONT_HEIGHT_SMALL, 16, 8, imgSFL1); @@ -2481,8 +2488,8 @@ void DebugInfo::drawFrame(OLEDDisplay *display, OLEDDisplayUiState *state, int16 #endif } else { // TODO: Raspberry Pi supports more than just the one screen size -#if (defined(USE_EINK) || defined(ILI9341_DRIVER) || defined(ST7735_CS) || defined(ST7789_CS) || defined(USE_ST7789) || \ - defined(HX8357_CS) || ARCH_PORTDUINO) && \ +#if (defined(USE_EINK) || defined(ILI9341_DRIVER) || defined(ST7701_CS) || defined(ST7735_CS) || defined(ST7789_CS) || \ + defined(USE_ST7789) || defined(HX8357_CS) || ARCH_PORTDUINO) && \ !defined(DISPLAY_FORCE_SMALL_FONTS) display->drawFastImage(x + SCREEN_WIDTH - 14 - display->getStringWidth(ourId), y + 3 + FONT_HEIGHT_SMALL, 12, 8, imgInfoL1); diff --git a/src/graphics/ScreenFonts.h b/src/graphics/ScreenFonts.h index 267f6e0a8..34c832635 100644 --- a/src/graphics/ScreenFonts.h +++ b/src/graphics/ScreenFonts.h @@ -12,8 +12,8 @@ #include "graphics/fonts/OLEDDisplayFontsUA.h" #endif -#if (defined(USE_EINK) || defined(ILI9341_DRIVER) || defined(ST7735_CS) || defined(ST7789_CS) || defined(USE_ST7789) || \ - defined(HX8357_CS)) && \ +#if (defined(USE_EINK) || defined(ILI9341_DRIVER) || defined(ST7701_CS) || defined(ST7735_CS) || defined(ST7789_CS) || \ + defined(USE_ST7789) || defined(HX8357_CS)) && \ !defined(DISPLAY_FORCE_SMALL_FONTS) // The screen is bigger so use bigger fonts #define FONT_SMALL ArialMT_Plain_16 // Height: 19 diff --git a/src/graphics/TFTDisplay.cpp b/src/graphics/TFTDisplay.cpp index 27875e910..0c5f3194c 100644 --- a/src/graphics/TFTDisplay.cpp +++ b/src/graphics/TFTDisplay.cpp @@ -506,10 +506,126 @@ class LGFX : public lgfx::LGFX_Device static LGFX *tft = nullptr; +#elif defined(ST7701_CS) +#include // Graphics and font library for ST7701 driver chip +#include +#include + +class LGFX : public lgfx::LGFX_Device +{ + lgfx::Panel_ST7701 _panel_instance; + lgfx::Bus_RGB _bus_instance; + lgfx::Light_PWM _light_instance; + lgfx::Touch_FT5x06 _touch_instance; + + public: + LGFX(void) + { + { + auto cfg = _panel_instance.config(); + cfg.memory_width = 800; + cfg.memory_height = 480; + cfg.panel_width = TFT_WIDTH; + cfg.panel_height = TFT_HEIGHT; + cfg.offset_x = TFT_OFFSET_X; + cfg.offset_y = TFT_OFFSET_Y; + _panel_instance.config(cfg); + } + + { + auto cfg = _panel_instance.config_detail(); + cfg.pin_cs = ST7701_CS; + cfg.pin_sclk = ST7701_SCK; + cfg.pin_mosi = ST7701_SDA; + // cfg.use_psram = 1; + _panel_instance.config_detail(cfg); + } + + { + auto cfg = _bus_instance.config(); + cfg.panel = &_panel_instance; +#ifdef SENSECAP_INDICATOR + cfg.pin_d0 = GPIO_NUM_15; // B0 + cfg.pin_d1 = GPIO_NUM_14; // B1 + cfg.pin_d2 = GPIO_NUM_13; // B2 + cfg.pin_d3 = GPIO_NUM_12; // B3 + cfg.pin_d4 = GPIO_NUM_11; // B4 + + cfg.pin_d5 = GPIO_NUM_10; // G0 + cfg.pin_d6 = GPIO_NUM_9; // G1 + cfg.pin_d7 = GPIO_NUM_8; // G2 + cfg.pin_d8 = GPIO_NUM_7; // G3 + cfg.pin_d9 = GPIO_NUM_6; // G4 + cfg.pin_d10 = GPIO_NUM_5; // G5 + + cfg.pin_d11 = GPIO_NUM_4; // R0 + cfg.pin_d12 = GPIO_NUM_3; // R1 + cfg.pin_d13 = GPIO_NUM_2; // R2 + cfg.pin_d14 = GPIO_NUM_1; // R3 + cfg.pin_d15 = GPIO_NUM_0; // R4 + + cfg.pin_henable = GPIO_NUM_18; + cfg.pin_vsync = GPIO_NUM_17; + cfg.pin_hsync = GPIO_NUM_16; + cfg.pin_pclk = GPIO_NUM_21; + cfg.freq_write = 12000000; + + cfg.hsync_polarity = 0; + cfg.hsync_front_porch = 10; + cfg.hsync_pulse_width = 8; + cfg.hsync_back_porch = 50; + + cfg.vsync_polarity = 0; + cfg.vsync_front_porch = 10; + cfg.vsync_pulse_width = 8; + cfg.vsync_back_porch = 20; + + cfg.pclk_active_neg = 0; + cfg.de_idle_high = 1; + cfg.pclk_idle_high = 0; +#endif + _bus_instance.config(cfg); + } + _panel_instance.setBus(&_bus_instance); + + { + auto cfg = _light_instance.config(); + cfg.pin_bl = ST7701_BL; + _light_instance.config(cfg); + } + _panel_instance.light(&_light_instance); + + { + auto cfg = _touch_instance.config(); + cfg.pin_cs = -1; + cfg.x_min = 0; + cfg.x_max = 479; + cfg.y_min = 0; + cfg.y_max = 479; + cfg.pin_int = -1; // don't use SCREEN_TOUCH_INT; + cfg.pin_rst = SCREEN_TOUCH_RST; + cfg.bus_shared = true; + cfg.offset_rotation = TFT_OFFSET_ROTATION; + + cfg.i2c_port = TOUCH_I2C_PORT; + cfg.i2c_addr = TOUCH_SLAVE_ADDRESS; + cfg.pin_sda = I2C_SDA; + cfg.pin_scl = I2C_SCL; + cfg.freq = 400000; + _touch_instance.config(cfg); + _panel_instance.setTouch(&_touch_instance); + } + + setPanel(&_panel_instance); + } +}; + +static LGFX *tft = nullptr; + #endif -#if defined(ST7735_CS) || defined(ST7789_CS) || defined(ILI9341_DRIVER) || defined(RAK14014) || defined(HX8357_CS) || \ - (ARCH_PORTDUINO && HAS_SCREEN != 0) +#if defined(ST7701_CS) || defined(ST7735_CS) || defined(ST7789_CS) || defined(ILI9341_DRIVER) || defined(RAK14014) || \ + defined(HX8357_CS) || (ARCH_PORTDUINO && HAS_SCREEN != 0) #include "SPILock.h" #include "TFTDisplay.h" #include @@ -715,7 +831,6 @@ bool TFTDisplay::connect() #ifdef UNPHONE unphone.backlight(true); // using unPhone library - LOG_INFO("Power to TFT Backlight\n"); #endif #if !defined(M5STACK_CORE2) tft->init(); @@ -732,7 +847,7 @@ bool TFTDisplay::connect() attachInterrupt(digitalPinToInterrupt(SCREEN_TOUCH_INT), rak14014_tpIntHandle, FALLING); #elif defined(T_DECK) || defined(PICOMPUTER_S3) || defined(CHATTER_2) tft->setRotation(1); // T-Deck has the TFT in landscape -#elif defined(T_WATCH_S3) +#elif defined(T_WATCH_S3) || defined(SENSECAP_INDICATOR) tft->setRotation(2); // T-Watch S3 left-handed orientation #else tft->setRotation(3); // Orient horizontal and wide underneath the silkscreen name label diff --git a/src/graphics/images.h b/src/graphics/images.h index ab3767a89..7028f18e3 100644 --- a/src/graphics/images.h +++ b/src/graphics/images.h @@ -20,8 +20,8 @@ const uint8_t bluetoothConnectedIcon[36] PROGMEM = {0xfe, 0x01, 0xff, 0x03, 0x03 0xfe, 0x31, 0x00, 0x30, 0x30, 0x30, 0x30, 0x30, 0xf0, 0x3f, 0xe0, 0x1f}; #endif -#if (defined(USE_EINK) || defined(ILI9341_DRIVER) || defined(ST7735_CS) || defined(ST7789_CS) || defined(USE_ST7789) || \ - defined(HX8357_CS) || ARCH_PORTDUINO) && \ +#if (defined(USE_EINK) || defined(ILI9341_DRIVER) || defined(ST7701_CS) || defined(ST7735_CS) || defined(ST7789_CS) || \ + defined(USE_ST7789) || defined(HX8357_CS) || ARCH_PORTDUINO) && \ !defined(DISPLAY_FORCE_SMALL_FONTS) const uint8_t imgQuestionL1[] PROGMEM = {0xff, 0x01, 0x01, 0x32, 0x7b, 0x49, 0x49, 0x6f, 0x26, 0x01, 0x01, 0xff}; const uint8_t imgQuestionL2[] PROGMEM = {0x0f, 0x08, 0x08, 0x08, 0x06, 0x0f, 0x0f, 0x06, 0x08, 0x08, 0x08, 0x0f}; diff --git a/src/input/InputBroker.h b/src/input/InputBroker.h index 57c25af4b..082268f0a 100644 --- a/src/input/InputBroker.h +++ b/src/input/InputBroker.h @@ -4,6 +4,20 @@ #define ANYKEY 0xFF #define MATRIXKEY 0xFE +#define INPUT_BROKER_MSG_BRIGHTNESS_UP 0x11 +#define INPUT_BROKER_MSG_BRIGHTNESS_DOWN 0x12 +#define INPUT_BROKER_MSG_REBOOT 0x90 +#define INPUT_BROKER_MSG_SHUTDOWN 0x9b +#define INPUT_BROKER_MSG_GPS_TOGGLE 0x9e +#define INPUT_BROKER_MSG_MUTE_TOGGLE 0xac +#define INPUT_BROKER_MSG_SEND_PING 0xaf +#define INPUT_BROKER_MSG_LEFT 0xb4 +#define INPUT_BROKER_MSG_UP 0xb5 +#define INPUT_BROKER_MSG_DOWN 0xb6 +#define INPUT_BROKER_MSG_RIGHT 0xb7 +#define INPUT_BROKER_MSG_FN_SYMBOL_ON 0xf1 +#define INPUT_BROKER_MSG_FN_SYMBOL_OFF 0xf2 + typedef struct _InputEvent { const char *source; char inputEvent; diff --git a/src/input/LinuxInput.cpp b/src/input/LinuxInput.cpp index 6194195ed..57a87b0ef 100644 --- a/src/input/LinuxInput.cpp +++ b/src/input/LinuxInput.cpp @@ -147,11 +147,11 @@ int32_t LinuxInput::runOnce() case KEY_LEFT: // Left e.inputEvent = meshtastic_ModuleConfig_CannedMessageConfig_InputEventChar_LEFT; break; - e.kbchar = 0xb4; + e.kbchar = INPUT_BROKER_MSG_LEFT; case KEY_RIGHT: // Right e.inputEvent = meshtastic_ModuleConfig_CannedMessageConfig_InputEventChar_RIGHT; break; - e.kbchar = 0xb7; + e.kbchar = INPUT_BROKER_MSG_RIGHT; case KEY_ENTER: // Enter e.inputEvent = meshtastic_ModuleConfig_CannedMessageConfig_InputEventChar_SELECT; break; diff --git a/src/input/SerialKeyboard.cpp b/src/input/SerialKeyboard.cpp index fa3eb2528..7b7a2f3ec 100644 --- a/src/input/SerialKeyboard.cpp +++ b/src/input/SerialKeyboard.cpp @@ -87,7 +87,7 @@ int32_t SerialKeyboard::runOnce() e.inputEvent = meshtastic_ModuleConfig_CannedMessageConfig_InputEventChar_UP; } else if (!(shiftRegister2 & (1 << 2))) { e.inputEvent = meshtastic_ModuleConfig_CannedMessageConfig_InputEventChar_RIGHT; - e.kbchar = 0xb7; + e.kbchar = INPUT_BROKER_MSG_RIGHT; } else if (!(shiftRegister2 & (1 << 1))) { e.inputEvent = meshtastic_ModuleConfig_CannedMessageConfig_InputEventChar_SELECT; } else if (!(shiftRegister2 & (1 << 0))) { diff --git a/src/input/cardKbI2cImpl.cpp b/src/input/cardKbI2cImpl.cpp index 1bff49475..8aaebcb45 100644 --- a/src/input/cardKbI2cImpl.cpp +++ b/src/input/cardKbI2cImpl.cpp @@ -9,7 +9,7 @@ CardKbI2cImpl::CardKbI2cImpl() : KbI2cBase("cardKB") {} void CardKbI2cImpl::init() { -#ifndef ARCH_PORTDUINO +#if !MESHTASTIC_EXCLUDE_I2C && !defined(ARCH_PORTDUINO) if (cardkb_found.address == 0x00) { LOG_DEBUG("Rescanning for I2C keyboard\n"); uint8_t i2caddr_scan[] = {CARDKB_ADDR, TDECK_KB_ADDR, BBQ10_KB_ADDR}; @@ -57,4 +57,4 @@ void CardKbI2cImpl::init() } #endif inputBroker->registerSource(this); -} +} \ No newline at end of file diff --git a/src/input/kbI2cBase.cpp b/src/input/kbI2cBase.cpp index 024b16b9e..2692fc80d 100644 --- a/src/input/kbI2cBase.cpp +++ b/src/input/kbI2cBase.cpp @@ -94,7 +94,7 @@ int32_t KbI2cBase::runOnce() case 'e': // sym e if (is_sym) { e.inputEvent = meshtastic_ModuleConfig_CannedMessageConfig_InputEventChar_UP; - e.kbchar = 0xb5; + e.kbchar = INPUT_BROKER_MSG_UP; is_sym = false; // reset sym state after second keypress } else { e.inputEvent = ANYKEY; @@ -104,7 +104,7 @@ int32_t KbI2cBase::runOnce() case 'x': // sym x if (is_sym) { e.inputEvent = meshtastic_ModuleConfig_CannedMessageConfig_InputEventChar_DOWN; - e.kbchar = 0xb6; + e.kbchar = INPUT_BROKER_MSG_DOWN; is_sym = false; // reset sym state after second keypress } else { e.inputEvent = ANYKEY; @@ -134,8 +134,8 @@ int32_t KbI2cBase::runOnce() case 0x13: // Code scanner says the SYM key is 0x13 is_sym = !is_sym; e.inputEvent = ANYKEY; - e.kbchar = - is_sym ? 0xf1 : 0xf2; // send 0xf1 to tell CannedMessages to display that the modifier key is active + e.kbchar = is_sym ? INPUT_BROKER_MSG_FN_SYMBOL_ON // send 0xf1 to tell CannedMessages to display that + : INPUT_BROKER_MSG_FN_SYMBOL_OFF; // the modifier key is active break; case 0x0a: // apparently Enter on Q10 is a line feed instead of carriage return e.inputEvent = meshtastic_ModuleConfig_CannedMessageConfig_InputEventChar_SELECT; @@ -214,7 +214,7 @@ int32_t KbI2cBase::runOnce() if (is_sym) { is_sym = false; e.inputEvent = ANYKEY; - e.kbchar = 0xac; // mute notifications + e.kbchar = INPUT_BROKER_MSG_MUTE_TOGGLE; // mute notifications } else { e.inputEvent = ANYKEY; e.kbchar = c; @@ -224,7 +224,7 @@ int32_t KbI2cBase::runOnce() if (is_sym) { is_sym = false; e.inputEvent = ANYKEY; - e.kbchar = 0x11; // Increase Brightness code + e.kbchar = INPUT_BROKER_MSG_BRIGHTNESS_UP; // Increase Brightness code } else { e.inputEvent = ANYKEY; e.kbchar = c; @@ -234,7 +234,7 @@ int32_t KbI2cBase::runOnce() if (is_sym) { is_sym = false; e.inputEvent = ANYKEY; - e.kbchar = 0x12; // Decrease Brightness code + e.kbchar = INPUT_BROKER_MSG_BRIGHTNESS_DOWN; // Decrease Brightness code } else { e.inputEvent = ANYKEY; e.kbchar = c; @@ -244,7 +244,7 @@ int32_t KbI2cBase::runOnce() if (is_sym) { is_sym = false; e.inputEvent = ANYKEY; - e.kbchar = 0xaf; // (fn + space) + e.kbchar = INPUT_BROKER_MSG_SEND_PING; // (fn + space) } else { e.inputEvent = ANYKEY; e.kbchar = c; @@ -254,7 +254,7 @@ int32_t KbI2cBase::runOnce() if (is_sym) { is_sym = false; e.inputEvent = ANYKEY; - e.kbchar = 0x9e; + e.kbchar = INPUT_BROKER_MSG_GPS_TOGGLE; } else { e.inputEvent = ANYKEY; e.kbchar = c; @@ -269,32 +269,33 @@ int32_t KbI2cBase::runOnce() break; case 0xb5: // Up e.inputEvent = meshtastic_ModuleConfig_CannedMessageConfig_InputEventChar_UP; - e.kbchar = 0xb5; + e.kbchar = INPUT_BROKER_MSG_UP; break; case 0xb6: // Down e.inputEvent = meshtastic_ModuleConfig_CannedMessageConfig_InputEventChar_DOWN; - e.kbchar = 0xb6; + e.kbchar = INPUT_BROKER_MSG_DOWN; break; case 0xb4: // Left e.inputEvent = meshtastic_ModuleConfig_CannedMessageConfig_InputEventChar_LEFT; - e.kbchar = 0xb4; + e.kbchar = INPUT_BROKER_MSG_LEFT; break; case 0xb7: // Right e.inputEvent = meshtastic_ModuleConfig_CannedMessageConfig_InputEventChar_RIGHT; - e.kbchar = 0xb7; + e.kbchar = INPUT_BROKER_MSG_RIGHT; break; case 0xc: // Modifier key: 0xc is alt+c (Other options could be: 0xea = shift+mic button or 0x4 shift+$(speaker)) // toggle moddifiers button. is_sym = !is_sym; e.inputEvent = ANYKEY; - e.kbchar = is_sym ? 0xf1 : 0xf2; // send 0xf1 to tell CannedMessages to display that the modifier key is active + e.kbchar = is_sym ? INPUT_BROKER_MSG_FN_SYMBOL_ON // send 0xf1 to tell CannedMessages to display that the + : INPUT_BROKER_MSG_FN_SYMBOL_OFF; // modifier key is active break; - case 0x90: // fn+r + case 0x90: // fn+r INPUT_BROKER_MSG_REBOOT case 0x91: // fn+t - case 0x9b: // fn+s - case 0xac: // fn+m - case 0x9e: // fn+g - case 0xaf: // fn+space + case 0x9b: // fn+s INPUT_BROKER_MSG_SHUTDOWN + case 0xac: // fn+m INPUT_BROKER_MSG_MUTE_TOGGLE + case 0x9e: // fn+g INPUT_BROKER_MSG_GPS_TOGGLE + case 0xaf: // fn+space INPUT_BROKER_MSG_SEND_PING // just pass those unmodified e.inputEvent = ANYKEY; e.kbchar = c; diff --git a/src/main.cpp b/src/main.cpp index 4830a4d35..6242f5ff4 100644 --- a/src/main.cpp +++ b/src/main.cpp @@ -638,8 +638,6 @@ void setup() #if !MESHTASTIC_EXCLUDE_I2C #if !defined(ARCH_PORTDUINO) && !defined(ARCH_STM32WL) && !MESHTASTIC_EXCLUDE_ENVIRONMENTAL_SENSOR if (acc_info.type != ScanI2C::DeviceType::NONE) { - config.display.wake_on_tap_or_motion = true; - moduleConfig.external_notification.enabled = true; accelerometerThread = new AccelerometerThread(acc_info.type); } #endif @@ -751,8 +749,8 @@ void setup() #if !MESHTASTIC_EXCLUDE_I2C // Don't call screen setup until after nodedb is setup (because we need // the current region name) -#if defined(ST7735_CS) || defined(USE_EINK) || defined(ILI9341_DRIVER) || defined(ST7789_CS) || defined(HX8357_CS) || \ - defined(USE_ST7789) +#if defined(ST7701_CS) || defined(ST7735_CS) || defined(USE_EINK) || defined(ILI9341_DRIVER) || defined(ST7789_CS) || \ + defined(HX8357_CS) || defined(USE_ST7789) screen->setup(); #elif defined(ARCH_PORTDUINO) if (screen_found.port != ScanI2C::I2CPort::NO_I2C || settingsMap[displayPanel]) { diff --git a/src/mesh/Channels.cpp b/src/mesh/Channels.cpp index bba7571d2..47c013443 100644 --- a/src/mesh/Channels.cpp +++ b/src/mesh/Channels.cpp @@ -13,10 +13,6 @@ #include "mqtt/MQTT.h" #endif -/// 16 bytes of random PSK for our _public_ default channel that all devices power up on (AES128) -static const uint8_t defaultpsk[] = {0xd4, 0xf1, 0xbb, 0x3a, 0x20, 0x29, 0x07, 0x59, - 0xf0, 0xbc, 0xff, 0xab, 0xcf, 0x4e, 0x69, 0x01}; - Channels channels; const char *Channels::adminChannel = "admin"; diff --git a/src/mesh/Channels.h b/src/mesh/Channels.h index 4f87cb309..e5a750f71 100644 --- a/src/mesh/Channels.h +++ b/src/mesh/Channels.h @@ -129,4 +129,12 @@ class Channels }; /// Singleton channel table -extern Channels channels; \ No newline at end of file +extern Channels channels; + +/// 16 bytes of random PSK for our _public_ default channel that all devices power up on (AES128) +static const uint8_t defaultpsk[] = {0xd4, 0xf1, 0xbb, 0x3a, 0x20, 0x29, 0x07, 0x59, + 0xf0, 0xbc, 0xff, 0xab, 0xcf, 0x4e, 0x69, 0x01}; + +static const uint8_t eventpsk[] = {0x38, 0x4b, 0xbc, 0xc0, 0x1d, 0xc0, 0x22, 0xd1, 0x81, 0xbf, 0x36, + 0xb8, 0x61, 0x21, 0xe1, 0xfb, 0x96, 0xb7, 0x2e, 0x55, 0xbf, 0x74, + 0x22, 0x7e, 0x9d, 0x6a, 0xfb, 0x48, 0xd6, 0x4c, 0xb1, 0xa1}; \ No newline at end of file diff --git a/src/mesh/LR11x0Interface.cpp b/src/mesh/LR11x0Interface.cpp index 8f0dc062e..c0742f241 100644 --- a/src/mesh/LR11x0Interface.cpp +++ b/src/mesh/LR11x0Interface.cpp @@ -104,6 +104,13 @@ template bool LR11x0Interface::init() if (res == RADIOLIB_ERR_CHIP_NOT_FOUND) return false; + LR11x0VersionInfo_t version; + res = lora.getVersionInfo(&version); + if (res == RADIOLIB_ERR_NONE) + LOG_DEBUG("LR11x0 Device %d, HW %d, FW %d.%d, WiFi %d.%d, GNSS %d.%d\n", version.device, version.hardware, + version.fwMajor, version.fwMinor, version.fwMajorWiFi, version.fwMinorWiFi, version.fwGNSS, + version.almanacGNSS); + LOG_INFO("Frequency set to %f\n", getFreq()); LOG_INFO("Bandwidth set to %f\n", bw); LOG_INFO("Power output set to %d\n", power); diff --git a/src/mesh/MeshPacketQueue.cpp b/src/mesh/MeshPacketQueue.cpp index 6581b1ce4..da49ecb61 100644 --- a/src/mesh/MeshPacketQueue.cpp +++ b/src/mesh/MeshPacketQueue.cpp @@ -1,4 +1,5 @@ #include "MeshPacketQueue.h" +#include "NodeDB.h" #include "configuration.h" #include @@ -16,13 +17,9 @@ bool CompareMeshPacketFunc(const meshtastic_MeshPacket *p1, const meshtastic_Mes { assert(p1 && p2); auto p1p = getPriority(p1), p2p = getPriority(p2); - // If priorities differ, use that - // for equal priorities, order by id (older packets have higher priority - this will briefly be wrong when IDs roll over but - // no big deal) - return (p1p != p2p) - ? (p1p < p2p) // prefer bigger priorities - : ((p1->id & ID_COUNTER_MASK) >= (p2->id & ID_COUNTER_MASK)); // Mask to counter portion, prefer smaller packet ids + // for equal priorities, prefer packets already on mesh. + return (p1p != p2p) ? (p1p > p2p) : (getFrom(p1) != nodeDB->getNodeNum() && getFrom(p2) == nodeDB->getNodeNum()); } MeshPacketQueue::MeshPacketQueue(size_t _maxLen) : maxLen(_maxLen) {} @@ -69,8 +66,9 @@ bool MeshPacketQueue::enqueue(meshtastic_MeshPacket *p) return replaceLowerPriorityPacket(p); } - queue.push_back(p); - std::push_heap(queue.begin(), queue.end(), &CompareMeshPacketFunc); + // Find the correct position using upper_bound to maintain a stable order + auto it = std::upper_bound(queue.begin(), queue.end(), p, CompareMeshPacketFunc); + queue.insert(it, p); // Insert packet at the found position return true; } @@ -81,9 +79,7 @@ meshtastic_MeshPacket *MeshPacketQueue::dequeue() } auto *p = queue.front(); - std::pop_heap(queue.begin(), queue.end(), &CompareMeshPacketFunc); - queue.pop_back(); - + queue.erase(queue.begin()); // Remove the highest-priority packet return p; } @@ -104,7 +100,6 @@ meshtastic_MeshPacket *MeshPacketQueue::remove(NodeNum from, PacketId id) auto p = (*it); if (getFrom(p) == from && p->id == id) { queue.erase(it); - std::make_heap(queue.begin(), queue.end(), &CompareMeshPacketFunc); return p; } } @@ -115,28 +110,21 @@ meshtastic_MeshPacket *MeshPacketQueue::remove(NodeNum from, PacketId id) /** Attempt to find and remove a packet from this queue. Returns the packet which was removed from the queue */ bool MeshPacketQueue::replaceLowerPriorityPacket(meshtastic_MeshPacket *p) { - std::sort_heap(queue.begin(), queue.end(), &CompareMeshPacketFunc); // sort ascending based on priority (0 -> 127) - // find first packet which does not compare less (in priority) than parameter packet - auto low = std::lower_bound(queue.begin(), queue.end(), p, &CompareMeshPacketFunc); - - if (low == queue.begin()) { // if already at start, there are no packets with lower priority - return false; + if (queue.empty()) { + return false; // No packets to replace + } + // Check if the packet at the back has a lower priority than the new packet + auto &backPacket = queue.back(); + if (backPacket->priority < p->priority) { + // Remove the back packet + packetPool.release(backPacket); + queue.pop_back(); + // Insert the new packet in the correct order + enqueue(p); + return true; } - if (low == queue.end()) { - // all priorities in the vector are smaller than the incoming packet. Replace the lowest priority (first) element - low = queue.begin(); - } else { - // 'low' iterator points to first packet which does not compare less than parameter - --low; // iterate to lower priority packet - } - - if (getPriority(p) > getPriority(*low)) { - packetPool.release(*low); // deallocate and drop the packet we're replacing - *low = p; // replace low-pri packet at this position with incoming packet with higher priority - } - - std::make_heap(queue.begin(), queue.end(), &CompareMeshPacketFunc); - return true; + // If the back packet's priority is not lower, no replacement occurs + return false; } \ No newline at end of file diff --git a/src/mesh/NodeDB.cpp b/src/mesh/NodeDB.cpp index fa3667f32..5d1db88ae 100644 --- a/src/mesh/NodeDB.cpp +++ b/src/mesh/NodeDB.cpp @@ -121,6 +121,8 @@ NodeDB::NodeDB() owner.hw_model = HW_VENDOR; // Ensure user (nodeinfo) role is set to whatever we're configured to owner.role = config.device.role; + // Ensure macaddr is set to our macaddr as it will be copied in our info below + memcpy(owner.macaddr, ourMacAddr, sizeof(owner.macaddr)); // Include our owner in the node db under our nodenum meshtastic_NodeInfoLite *info = getOrCreateMeshNode(getNodeNum()); @@ -243,7 +245,7 @@ bool NodeDB::factoryReset(bool eraseBleBonds) #endif // second, install default state (this will deal with the duplicate mac address issue) installDefaultDeviceState(); - installDefaultConfig(); + installDefaultConfig(!eraseBleBonds); // Also preserve the private key if we're not erasing BLE bonds installDefaultModuleConfig(); installDefaultChannels(); // third, write everything to disk @@ -266,8 +268,13 @@ bool NodeDB::factoryReset(bool eraseBleBonds) return true; } -void NodeDB::installDefaultConfig() +void NodeDB::installDefaultConfig(bool preserveKey = false) { + uint8_t private_key_temp[32]; + bool shouldPreserveKey = preserveKey && config.has_security && config.security.private_key.size > 0; + if (shouldPreserveKey) { + memcpy(private_key_temp, config.security.private_key.bytes, config.security.private_key.size); + } LOG_INFO("Installing default LocalConfig\n"); memset(&config, 0, sizeof(meshtastic_LocalConfig)); config.version = DEVICESTATE_CUR_VER; @@ -285,6 +292,7 @@ void NodeDB::installDefaultConfig() config.lora.tx_enabled = true; // FIXME: maybe false in the future, and setting region to enable it. (unset region forces it off) config.lora.override_duty_cycle = false; + config.lora.config_ok_to_mqtt = false; #ifdef CONFIG_LORA_REGION_USERPREFS config.lora.region = CONFIG_LORA_REGION_USERPREFS; #else @@ -307,8 +315,14 @@ void NodeDB::installDefaultConfig() #else config.security.admin_key[0].size = 0; #endif + if (shouldPreserveKey) { + config.security.private_key.size = 32; + memcpy(config.security.private_key.bytes, private_key_temp, config.security.private_key.size); + printBytes("Restored key", config.security.private_key.bytes, config.security.private_key.size); + } else { + config.security.private_key.size = 0; + } config.security.public_key.size = 0; - config.security.private_key.size = 0; #ifdef PIN_GPS_EN config.position.gps_en_gpio = PIN_GPS_EN; #endif @@ -362,6 +376,9 @@ void NodeDB::installDefaultConfig() #ifdef DISPLAY_FLIP_SCREEN config.display.flip_screen = true; #endif +#ifdef RAK4630 + config.display.wake_on_tap_or_motion = true; +#endif #ifdef T_WATCH_S3 config.display.screen_on_secs = 30; config.display.wake_on_tap_or_motion = true; @@ -640,7 +657,9 @@ void NodeDB::pickNewNodeNum() while ((nodeNum == NODENUM_BROADCAST || nodeNum < NUM_RESERVED) || ((found = getMeshNode(nodeNum)) && memcmp(found->user.macaddr, ourMacAddr, sizeof(ourMacAddr)) != 0)) { NodeNum candidate = random(NUM_RESERVED, LONG_MAX); // try a new random choice - LOG_WARN("NOTE! Our desired nodenum 0x%x is invalid or in use, so trying for 0x%x\n", nodeNum, candidate); + LOG_WARN("NOTE! Our desired nodenum 0x%x is invalid or in use, by MAC ending in 0x%02x%02x vs our 0x%02x%02x, so " + "trying for 0x%x\n", + nodeNum, found->user.macaddr[4], found->user.macaddr[5], ourMacAddr[4], ourMacAddr[5], candidate); nodeNum = candidate; } LOG_DEBUG("Using nodenum 0x%x \n", nodeNum); @@ -706,7 +725,7 @@ void NodeDB::loadFromDisk() //} else { if (devicestate.version < DEVICESTATE_MIN_VER) { LOG_WARN("Devicestate %d is old, discarding\n", devicestate.version); - factoryReset(); + installDefaultDeviceState(); } else { LOG_INFO("Loaded saved devicestate version %d, with nodecount: %d\n", devicestate.version, devicestate.node_db_lite.size()); @@ -722,7 +741,7 @@ void NodeDB::loadFromDisk() } else { if (config.version < DEVICESTATE_MIN_VER) { LOG_WARN("config %d is old, discarding\n", config.version); - installDefaultConfig(); + installDefaultConfig(true); } else { LOG_INFO("Loaded saved config version %d\n", config.version); } @@ -1035,7 +1054,7 @@ bool NodeDB::updateUser(uint32_t nodeId, meshtastic_User &p, uint8_t channelInde if (p.public_key.size > 0) { printBytes("Incoming Pubkey: ", p.public_key.bytes, 32); if (info->user.public_key.size > 0) { // if we have a key for this user already, don't overwrite with a new one - LOG_INFO("Public Key set for node, not updateing!\n"); + LOG_INFO("Public Key set for node, not updating!\n"); // we copy the key into the incoming packet, to prevent overwrite memcpy(p.public_key.bytes, info->user.public_key.bytes, 32); } else { diff --git a/src/mesh/NodeDB.h b/src/mesh/NodeDB.h index a71f3e134..c94a7653c 100644 --- a/src/mesh/NodeDB.h +++ b/src/mesh/NodeDB.h @@ -182,7 +182,8 @@ class NodeDB void cleanupMeshDB(); /// Reinit device state from scratch (not loading from disk) - void installDefaultDeviceState(), installDefaultChannels(), installDefaultConfig(), installDefaultModuleConfig(); + void installDefaultDeviceState(), installDefaultChannels(), installDefaultConfig(bool preserveKey), + installDefaultModuleConfig(); /// write to flash /// @return true if the save was successful diff --git a/src/mesh/RadioInterface.cpp b/src/mesh/RadioInterface.cpp index 847c7c21b..2a349d534 100644 --- a/src/mesh/RadioInterface.cpp +++ b/src/mesh/RadioInterface.cpp @@ -422,7 +422,7 @@ void RadioInterface::applyModemConfig() switch (loraConfig.modem_preset) { case meshtastic_Config_LoRaConfig_ModemPreset_SHORT_TURBO: - bw = (myRegion->wideLora) ? 812.5 : 500; + bw = (myRegion->wideLora) ? 1625.0 : 500; cr = 5; sf = 7; break; diff --git a/src/mesh/Router.cpp b/src/mesh/Router.cpp index d8e578db1..b222872fa 100644 --- a/src/mesh/Router.cpp +++ b/src/mesh/Router.cpp @@ -378,6 +378,8 @@ bool perhapsDecode(meshtastic_MeshPacket *p) // parsing was successful p->which_payload_variant = meshtastic_MeshPacket_decoded_tag; // change type to decoded p->channel = chIndex; // change to store the index instead of the hash + if (p->decoded.has_bitfield) + p->decoded.want_response |= p->decoded.bitfield & BITFIELD_WANT_RESPONSE_MASK; /* Not actually ever used. // Decompress if needed. jm @@ -424,6 +426,12 @@ meshtastic_Routing_Error perhapsEncode(meshtastic_MeshPacket *p) // If the packet is not yet encrypted, do so now if (p->which_payload_variant == meshtastic_MeshPacket_decoded_tag) { + if (p->from == nodeDB->getNodeNum()) { + p->decoded.has_bitfield = true; + p->decoded.bitfield |= (config.lora.config_ok_to_mqtt << BITFIELD_OK_TO_MQTT_SHIFT); + p->decoded.bitfield |= (p->decoded.want_response << BITFIELD_WANT_RESPONSE_SHIFT); + } + size_t numbytes = pb_encode_to_bytes(bytes, sizeof(bytes), &meshtastic_Data_msg, &p->decoded); /* Not actually used, so save the cycles diff --git a/src/mesh/Router.h b/src/mesh/Router.h index 98486745b..fd4b0ccf9 100644 --- a/src/mesh/Router.h +++ b/src/mesh/Router.h @@ -148,3 +148,8 @@ extern Router *router; /// Generate a unique packet id // FIXME, move this someplace better PacketId generatePacketId(); + +#define BITFIELD_WANT_RESPONSE_SHIFT 1 +#define BITFIELD_OK_TO_MQTT_SHIFT 0 +#define BITFIELD_WANT_RESPONSE_MASK (1 << BITFIELD_WANT_RESPONSE_SHIFT) +#define BITFIELD_OK_TO_MQTT_MASK (1 << BITFIELD_OK_TO_MQTT_SHIFT) \ No newline at end of file diff --git a/src/mesh/TypeConversions.cpp b/src/mesh/TypeConversions.cpp index 513728ca5..6a90ac703 100644 --- a/src/mesh/TypeConversions.cpp +++ b/src/mesh/TypeConversions.cpp @@ -78,7 +78,7 @@ meshtastic_UserLite TypeConversions::ConvertToUserLite(meshtastic_User user) lite.hw_model = user.hw_model; lite.role = user.role; lite.is_licensed = user.is_licensed; - memccpy(lite.macaddr, user.macaddr, sizeof(user.macaddr), sizeof(lite.macaddr)); + memcpy(lite.macaddr, user.macaddr, sizeof(lite.macaddr)); memcpy(lite.public_key.bytes, user.public_key.bytes, sizeof(lite.public_key.bytes)); lite.public_key.size = user.public_key.size; return lite; @@ -94,7 +94,7 @@ meshtastic_User TypeConversions::ConvertToUser(uint32_t nodeNum, meshtastic_User user.hw_model = lite.hw_model; user.role = lite.role; user.is_licensed = lite.is_licensed; - memccpy(user.macaddr, lite.macaddr, sizeof(lite.macaddr), sizeof(user.macaddr)); + memcpy(user.macaddr, lite.macaddr, sizeof(user.macaddr)); memcpy(user.public_key.bytes, lite.public_key.bytes, sizeof(user.public_key.bytes)); user.public_key.size = lite.public_key.size; diff --git a/src/mesh/api/ServerAPI.cpp b/src/mesh/api/ServerAPI.cpp index 140567ad2..3a483aac1 100644 --- a/src/mesh/api/ServerAPI.cpp +++ b/src/mesh/api/ServerAPI.cpp @@ -5,7 +5,7 @@ template ServerAPI::ServerAPI(T &_client) : StreamAPI(&client), concurrency::OSThread("ServerAPI"), client(_client) { - LOG_INFO("Incoming wifi connection\n"); + LOG_INFO("Incoming API connection\n"); } template ServerAPI::~ServerAPI() @@ -49,6 +49,16 @@ template int32_t APIServerPort::runOnce() if (client) { // Close any previous connection (see FIXME in header file) if (openAPI) { +#if RAK_4631 + // RAK13800 Ethernet requests periodically take more time + // This backoff addresses most cases keeping max wait < 1s + // Reconnections are delayed by full wait time + if (waitTime < 400) { + waitTime *= 2; + LOG_INFO("Previous TCP connection still open, trying again in %dms\n", waitTime); + return waitTime; + } +#endif LOG_INFO("Force closing previous TCP connection\n"); delete openAPI; } @@ -56,5 +66,8 @@ template int32_t APIServerPort::runOnce() openAPI = new T(client); } +#if RAK_4631 + waitTime = 100; +#endif return 100; // only check occasionally for incoming connections } diff --git a/src/mesh/api/ServerAPI.h b/src/mesh/api/ServerAPI.h index dd2a767c9..5b84fddd7 100644 --- a/src/mesh/api/ServerAPI.h +++ b/src/mesh/api/ServerAPI.h @@ -31,7 +31,7 @@ template class ServerAPI : public StreamAPI, private concurrency::OSTh }; /** - * Listens for incoming connections and does accepts and creates instances of WiFiServerAPI as needed + * Listens for incoming connections and does accepts and creates instances of ServerAPI as needed */ template class APIServerPort : public U, private concurrency::OSThread { @@ -41,6 +41,10 @@ template class APIServerPort : public U, private concurrency: * delegate to the worker. Once coroutines are implemented we can relax this restriction. */ T *openAPI = NULL; +#if RAK_4631 + // Track wait time for RAK13800 Ethernet requests + int32_t waitTime = 100; +#endif public: explicit APIServerPort(int port); diff --git a/src/mesh/api/ethServerAPI.h b/src/mesh/api/ethServerAPI.h index 59673a684..6f214c75a 100644 --- a/src/mesh/api/ethServerAPI.h +++ b/src/mesh/api/ethServerAPI.h @@ -14,7 +14,7 @@ class ethServerAPI : public ServerAPI }; /** - * Listens for incoming connections and does accepts and creates instances of WiFiServerAPI as needed + * Listens for incoming connections and does accepts and creates instances of EthernetServerAPI as needed */ class ethServerPort : public APIServerPort { diff --git a/src/mesh/eth/ethClient.cpp b/src/mesh/eth/ethClient.cpp index 9f3bb8ab7..1c97f3bed 100644 --- a/src/mesh/eth/ethClient.cpp +++ b/src/mesh/eth/ethClient.cpp @@ -38,7 +38,7 @@ static int32_t reconnectETH() Ethernet.maintain(); if (!ethStartupComplete) { // Start web server - LOG_INFO("... Starting network services\n"); + LOG_INFO("Starting Ethernet network services\n"); #ifndef DISABLE_NTP LOG_INFO("Starting NTP time client\n"); @@ -131,7 +131,8 @@ bool initEthernet() status = Ethernet.begin(mac); } else if (config.network.address_mode == meshtastic_Config_NetworkConfig_AddressMode_STATIC) { LOG_INFO("starting Ethernet Static\n"); - Ethernet.begin(mac, config.network.ipv4_config.ip, config.network.ipv4_config.dns, config.network.ipv4_config.subnet); + Ethernet.begin(mac, config.network.ipv4_config.ip, config.network.ipv4_config.dns, config.network.ipv4_config.gateway, + config.network.ipv4_config.subnet); status = 1; } else { LOG_INFO("Ethernet Disabled\n"); @@ -186,4 +187,4 @@ bool isEthernetAvailable() } } -#endif \ No newline at end of file +#endif diff --git a/src/mesh/generated/meshtastic/apponly.pb.h b/src/mesh/generated/meshtastic/apponly.pb.h index f5bacea52..31211a91b 100644 --- a/src/mesh/generated/meshtastic/apponly.pb.h +++ b/src/mesh/generated/meshtastic/apponly.pb.h @@ -55,7 +55,7 @@ extern const pb_msgdesc_t meshtastic_ChannelSet_msg; /* Maximum encoded size of messages (where known) */ #define MESHTASTIC_MESHTASTIC_APPONLY_PB_H_MAX_SIZE meshtastic_ChannelSet_size -#define meshtastic_ChannelSet_size 676 +#define meshtastic_ChannelSet_size 679 #ifdef __cplusplus } /* extern "C" */ diff --git a/src/mesh/generated/meshtastic/config.pb.h b/src/mesh/generated/meshtastic/config.pb.h index eb03ddc58..66ffa0a4b 100644 --- a/src/mesh/generated/meshtastic/config.pb.h +++ b/src/mesh/generated/meshtastic/config.pb.h @@ -510,6 +510,8 @@ typedef struct _meshtastic_Config_LoRaConfig { uint32_t ignore_incoming[3]; /* If true, the device will not process any packets received via LoRa that passed via MQTT anywhere on the path towards it. */ bool ignore_mqtt; + /* Sets the ok_to_mqtt bit on outgoing packets */ + bool config_ok_to_mqtt; } meshtastic_Config_LoRaConfig; typedef struct _meshtastic_Config_BluetoothConfig { @@ -656,7 +658,7 @@ extern "C" { #define meshtastic_Config_NetworkConfig_init_default {0, "", "", "", 0, _meshtastic_Config_NetworkConfig_AddressMode_MIN, false, meshtastic_Config_NetworkConfig_IpV4Config_init_default, ""} #define meshtastic_Config_NetworkConfig_IpV4Config_init_default {0, 0, 0, 0} #define meshtastic_Config_DisplayConfig_init_default {0, _meshtastic_Config_DisplayConfig_GpsCoordinateFormat_MIN, 0, 0, 0, _meshtastic_Config_DisplayConfig_DisplayUnits_MIN, _meshtastic_Config_DisplayConfig_OledType_MIN, _meshtastic_Config_DisplayConfig_DisplayMode_MIN, 0, 0, _meshtastic_Config_DisplayConfig_CompassOrientation_MIN} -#define meshtastic_Config_LoRaConfig_init_default {0, _meshtastic_Config_LoRaConfig_ModemPreset_MIN, 0, 0, 0, 0, _meshtastic_Config_LoRaConfig_RegionCode_MIN, 0, 0, 0, 0, 0, 0, 0, 0, 0, {0, 0, 0}, 0} +#define meshtastic_Config_LoRaConfig_init_default {0, _meshtastic_Config_LoRaConfig_ModemPreset_MIN, 0, 0, 0, 0, _meshtastic_Config_LoRaConfig_RegionCode_MIN, 0, 0, 0, 0, 0, 0, 0, 0, 0, {0, 0, 0}, 0, 0} #define meshtastic_Config_BluetoothConfig_init_default {0, _meshtastic_Config_BluetoothConfig_PairingMode_MIN, 0} #define meshtastic_Config_SecurityConfig_init_default {{0, {0}}, {0, {0}}, 0, {{0, {0}}}, 0, 0, 0, 0} #define meshtastic_Config_SessionkeyConfig_init_default {0} @@ -667,7 +669,7 @@ extern "C" { #define meshtastic_Config_NetworkConfig_init_zero {0, "", "", "", 0, _meshtastic_Config_NetworkConfig_AddressMode_MIN, false, meshtastic_Config_NetworkConfig_IpV4Config_init_zero, ""} #define meshtastic_Config_NetworkConfig_IpV4Config_init_zero {0, 0, 0, 0} #define meshtastic_Config_DisplayConfig_init_zero {0, _meshtastic_Config_DisplayConfig_GpsCoordinateFormat_MIN, 0, 0, 0, _meshtastic_Config_DisplayConfig_DisplayUnits_MIN, _meshtastic_Config_DisplayConfig_OledType_MIN, _meshtastic_Config_DisplayConfig_DisplayMode_MIN, 0, 0, _meshtastic_Config_DisplayConfig_CompassOrientation_MIN} -#define meshtastic_Config_LoRaConfig_init_zero {0, _meshtastic_Config_LoRaConfig_ModemPreset_MIN, 0, 0, 0, 0, _meshtastic_Config_LoRaConfig_RegionCode_MIN, 0, 0, 0, 0, 0, 0, 0, 0, 0, {0, 0, 0}, 0} +#define meshtastic_Config_LoRaConfig_init_zero {0, _meshtastic_Config_LoRaConfig_ModemPreset_MIN, 0, 0, 0, 0, _meshtastic_Config_LoRaConfig_RegionCode_MIN, 0, 0, 0, 0, 0, 0, 0, 0, 0, {0, 0, 0}, 0, 0} #define meshtastic_Config_BluetoothConfig_init_zero {0, _meshtastic_Config_BluetoothConfig_PairingMode_MIN, 0} #define meshtastic_Config_SecurityConfig_init_zero {{0, {0}}, {0, {0}}, 0, {{0, {0}}}, 0, 0, 0, 0} #define meshtastic_Config_SessionkeyConfig_init_zero {0} @@ -746,6 +748,7 @@ extern "C" { #define meshtastic_Config_LoRaConfig_pa_fan_disabled_tag 15 #define meshtastic_Config_LoRaConfig_ignore_incoming_tag 103 #define meshtastic_Config_LoRaConfig_ignore_mqtt_tag 104 +#define meshtastic_Config_LoRaConfig_config_ok_to_mqtt_tag 105 #define meshtastic_Config_BluetoothConfig_enabled_tag 1 #define meshtastic_Config_BluetoothConfig_mode_tag 2 #define meshtastic_Config_BluetoothConfig_fixed_pin_tag 3 @@ -887,7 +890,8 @@ X(a, STATIC, SINGULAR, BOOL, sx126x_rx_boosted_gain, 13) \ X(a, STATIC, SINGULAR, FLOAT, override_frequency, 14) \ X(a, STATIC, SINGULAR, BOOL, pa_fan_disabled, 15) \ X(a, STATIC, REPEATED, UINT32, ignore_incoming, 103) \ -X(a, STATIC, SINGULAR, BOOL, ignore_mqtt, 104) +X(a, STATIC, SINGULAR, BOOL, ignore_mqtt, 104) \ +X(a, STATIC, SINGULAR, BOOL, config_ok_to_mqtt, 105) #define meshtastic_Config_LoRaConfig_CALLBACK NULL #define meshtastic_Config_LoRaConfig_DEFAULT NULL @@ -944,7 +948,7 @@ extern const pb_msgdesc_t meshtastic_Config_SessionkeyConfig_msg; #define meshtastic_Config_BluetoothConfig_size 10 #define meshtastic_Config_DeviceConfig_size 98 #define meshtastic_Config_DisplayConfig_size 30 -#define meshtastic_Config_LoRaConfig_size 82 +#define meshtastic_Config_LoRaConfig_size 85 #define meshtastic_Config_NetworkConfig_IpV4Config_size 20 #define meshtastic_Config_NetworkConfig_size 196 #define meshtastic_Config_PositionConfig_size 62 diff --git a/src/mesh/generated/meshtastic/deviceonly.pb.h b/src/mesh/generated/meshtastic/deviceonly.pb.h index 692402210..209084220 100644 --- a/src/mesh/generated/meshtastic/deviceonly.pb.h +++ b/src/mesh/generated/meshtastic/deviceonly.pb.h @@ -358,7 +358,7 @@ extern const pb_msgdesc_t meshtastic_OEMStore_msg; #define MESHTASTIC_MESHTASTIC_DEVICEONLY_PB_H_MAX_SIZE meshtastic_OEMStore_size #define meshtastic_ChannelFile_size 718 #define meshtastic_NodeInfoLite_size 183 -#define meshtastic_OEMStore_size 3497 +#define meshtastic_OEMStore_size 3500 #define meshtastic_PositionLite_size 28 #define meshtastic_UserLite_size 96 diff --git a/src/mesh/generated/meshtastic/localonly.pb.h b/src/mesh/generated/meshtastic/localonly.pb.h index 91a23dc4f..72f29500c 100644 --- a/src/mesh/generated/meshtastic/localonly.pb.h +++ b/src/mesh/generated/meshtastic/localonly.pb.h @@ -187,7 +187,7 @@ extern const pb_msgdesc_t meshtastic_LocalModuleConfig_msg; /* Maximum encoded size of messages (where known) */ #define MESHTASTIC_MESHTASTIC_LOCALONLY_PB_H_MAX_SIZE meshtastic_LocalModuleConfig_size -#define meshtastic_LocalConfig_size 664 +#define meshtastic_LocalConfig_size 667 #define meshtastic_LocalModuleConfig_size 687 #ifdef __cplusplus diff --git a/src/mesh/generated/meshtastic/mesh.pb.h b/src/mesh/generated/meshtastic/mesh.pb.h index 1bfdc1c70..677b9e51d 100644 --- a/src/mesh/generated/meshtastic/mesh.pb.h +++ b/src/mesh/generated/meshtastic/mesh.pb.h @@ -583,6 +583,9 @@ typedef struct _meshtastic_Data { /* Defaults to false. If true, then what is in the payload should be treated as an emoji like giving a message a heart or poop emoji. */ uint32_t emoji; + /* Bitfield for extra flags. First use is to indicate that user approves the packet being uploaded to MQTT. */ + bool has_bitfield; + uint8_t bitfield; } meshtastic_Data; /* Waypoint message, used to share arbitrary locations across the mesh */ @@ -1085,7 +1088,7 @@ extern "C" { #define meshtastic_User_init_default {"", "", "", {0}, _meshtastic_HardwareModel_MIN, 0, _meshtastic_Config_DeviceConfig_Role_MIN, {0, {0}}} #define meshtastic_RouteDiscovery_init_default {0, {0, 0, 0, 0, 0, 0, 0, 0}, 0, {0, 0, 0, 0, 0, 0, 0, 0}, 0, {0, 0, 0, 0, 0, 0, 0, 0}, 0, {0, 0, 0, 0, 0, 0, 0, 0}} #define meshtastic_Routing_init_default {0, {meshtastic_RouteDiscovery_init_default}} -#define meshtastic_Data_init_default {_meshtastic_PortNum_MIN, {0, {0}}, 0, 0, 0, 0, 0, 0} +#define meshtastic_Data_init_default {_meshtastic_PortNum_MIN, {0, {0}}, 0, 0, 0, 0, 0, 0, false, 0} #define meshtastic_Waypoint_init_default {0, false, 0, false, 0, 0, 0, "", "", 0} #define meshtastic_MqttClientProxyMessage_init_default {"", 0, {{0, {0}}}, 0} #define meshtastic_MeshPacket_init_default {0, 0, 0, 0, {meshtastic_Data_init_default}, 0, 0, 0, 0, 0, _meshtastic_MeshPacket_Priority_MIN, 0, _meshtastic_MeshPacket_Delayed_MIN, 0, 0, {0, {0}}, 0} @@ -1110,7 +1113,7 @@ extern "C" { #define meshtastic_User_init_zero {"", "", "", {0}, _meshtastic_HardwareModel_MIN, 0, _meshtastic_Config_DeviceConfig_Role_MIN, {0, {0}}} #define meshtastic_RouteDiscovery_init_zero {0, {0, 0, 0, 0, 0, 0, 0, 0}, 0, {0, 0, 0, 0, 0, 0, 0, 0}, 0, {0, 0, 0, 0, 0, 0, 0, 0}, 0, {0, 0, 0, 0, 0, 0, 0, 0}} #define meshtastic_Routing_init_zero {0, {meshtastic_RouteDiscovery_init_zero}} -#define meshtastic_Data_init_zero {_meshtastic_PortNum_MIN, {0, {0}}, 0, 0, 0, 0, 0, 0} +#define meshtastic_Data_init_zero {_meshtastic_PortNum_MIN, {0, {0}}, 0, 0, 0, 0, 0, 0, false, 0} #define meshtastic_Waypoint_init_zero {0, false, 0, false, 0, 0, 0, "", "", 0} #define meshtastic_MqttClientProxyMessage_init_zero {"", 0, {{0, {0}}}, 0} #define meshtastic_MeshPacket_init_zero {0, 0, 0, 0, {meshtastic_Data_init_zero}, 0, 0, 0, 0, 0, _meshtastic_MeshPacket_Priority_MIN, 0, _meshtastic_MeshPacket_Delayed_MIN, 0, 0, {0, {0}}, 0} @@ -1179,6 +1182,7 @@ extern "C" { #define meshtastic_Data_request_id_tag 6 #define meshtastic_Data_reply_id_tag 7 #define meshtastic_Data_emoji_tag 8 +#define meshtastic_Data_bitfield_tag 9 #define meshtastic_Waypoint_id_tag 1 #define meshtastic_Waypoint_latitude_i_tag 2 #define meshtastic_Waypoint_longitude_i_tag 3 @@ -1354,7 +1358,8 @@ X(a, STATIC, SINGULAR, FIXED32, dest, 4) \ X(a, STATIC, SINGULAR, FIXED32, source, 5) \ X(a, STATIC, SINGULAR, FIXED32, request_id, 6) \ X(a, STATIC, SINGULAR, FIXED32, reply_id, 7) \ -X(a, STATIC, SINGULAR, FIXED32, emoji, 8) +X(a, STATIC, SINGULAR, FIXED32, emoji, 8) \ +X(a, STATIC, OPTIONAL, UINT32, bitfield, 9) #define meshtastic_Data_CALLBACK NULL #define meshtastic_Data_DEFAULT NULL @@ -1632,13 +1637,13 @@ extern const pb_msgdesc_t meshtastic_ChunkedPayloadResponse_msg; #define meshtastic_ChunkedPayload_size 245 #define meshtastic_ClientNotification_size 415 #define meshtastic_Compressed_size 243 -#define meshtastic_Data_size 270 +#define meshtastic_Data_size 273 #define meshtastic_DeviceMetadata_size 46 #define meshtastic_FileInfo_size 236 #define meshtastic_FromRadio_size 510 #define meshtastic_Heartbeat_size 0 #define meshtastic_LogRecord_size 426 -#define meshtastic_MeshPacket_size 364 +#define meshtastic_MeshPacket_size 367 #define meshtastic_MqttClientProxyMessage_size 501 #define meshtastic_MyNodeInfo_size 18 #define meshtastic_NeighborInfo_size 258 diff --git a/src/mesh/wifi/WiFiAPClient.cpp b/src/mesh/wifi/WiFiAPClient.cpp index e733d1801..07b03222e 100644 --- a/src/mesh/wifi/WiFiAPClient.cpp +++ b/src/mesh/wifi/WiFiAPClient.cpp @@ -15,10 +15,8 @@ #include #ifdef ARCH_ESP32 #if !MESHTASTIC_EXCLUDE_WEBSERVER -#if !MESHTASTIC_EXCLUDE_WEBSERVER #include "mesh/http/WebServer.h" #endif -#endif #include #include static void WiFiEvent(WiFiEvent_t event); @@ -58,7 +56,7 @@ static void onNetworkConnected() { if (!APStartupComplete) { // Start web server - LOG_INFO("Starting network services\n"); + LOG_INFO("Starting WiFi network services\n"); #ifdef ARCH_ESP32 // start mdns @@ -422,4 +420,4 @@ uint8_t getWifiDisconnectReason() { return wifiDisconnectReason; } -#endif \ No newline at end of file +#endif diff --git a/src/modules/AdminModule.cpp b/src/modules/AdminModule.cpp index bfe3a9ba5..4deb99eb7 100644 --- a/src/modules/AdminModule.cpp +++ b/src/modules/AdminModule.cpp @@ -186,18 +186,22 @@ bool AdminModule::handleReceivedProtobuf(const meshtastic_MeshPacket &mp, meshta break; } case meshtastic_AdminMessage_factory_reset_config_tag: { + disableBluetooth(); LOG_INFO("Initiating factory config reset\n"); nodeDB->factoryReset(); + LOG_INFO("Factory config reset finished, rebooting soon.\n"); reboot(DEFAULT_REBOOT_SECONDS); break; } case meshtastic_AdminMessage_factory_reset_device_tag: { + disableBluetooth(); LOG_INFO("Initiating full factory reset\n"); nodeDB->factoryReset(true); reboot(DEFAULT_REBOOT_SECONDS); break; } case meshtastic_AdminMessage_nodedb_reset_tag: { + disableBluetooth(); LOG_INFO("Initiating node-db reset\n"); nodeDB->resetNodes(); reboot(DEFAULT_REBOOT_SECONDS); @@ -209,6 +213,7 @@ bool AdminModule::handleReceivedProtobuf(const meshtastic_MeshPacket &mp, meshta break; } case meshtastic_AdminMessage_commit_edit_settings_tag: { + disableBluetooth(); LOG_INFO("Committing transaction for edited settings\n"); hasOpenEditTransaction = false; saveChanges(SEGMENT_CONFIG | SEGMENT_MODULECONFIG | SEGMENT_DEVICESTATE | SEGMENT_CHANNELS); @@ -406,7 +411,8 @@ void AdminModule::handleSetConfig(const meshtastic_Config &c) LOG_INFO("Setting config: Device\n"); config.has_device = true; #if !defined(ARCH_PORTDUINO) && !defined(ARCH_STM32WL) && !MESHTASTIC_EXCLUDE_ENVIRONMENTAL_SENSOR - if (config.device.double_tap_as_button_press == false && c.payload_variant.device.double_tap_as_button_press == true) { + if (config.device.double_tap_as_button_press == false && c.payload_variant.device.double_tap_as_button_press == true && + accelerometerThread->enabled == false) { accelerometerThread->start(); } #endif @@ -484,7 +490,8 @@ void AdminModule::handleSetConfig(const meshtastic_Config &c) requiresReboot = false; } #if !defined(ARCH_PORTDUINO) && !defined(ARCH_STM32WL) && !MESHTASTIC_EXCLUDE_ENVIRONMENTAL_SENSOR - if (config.display.wake_on_tap_or_motion == false && c.payload_variant.display.wake_on_tap_or_motion == true) { + if (config.display.wake_on_tap_or_motion == false && c.payload_variant.display.wake_on_tap_or_motion == true && + accelerometerThread->enabled == false) { accelerometerThread->start(); } #endif @@ -557,12 +564,16 @@ void AdminModule::handleSetConfig(const meshtastic_Config &c) break; } + if (requiresReboot) { + disableBluetooth(); + } saveChanges(changes, requiresReboot); } void AdminModule::handleSetModuleConfig(const meshtastic_ModuleConfig &c) { + disableBluetooth(); switch (c.which_payload_variant) { case meshtastic_ModuleConfig_mqtt_tag: LOG_INFO("Setting module config: MQTT\n"); @@ -634,7 +645,6 @@ void AdminModule::handleSetModuleConfig(const meshtastic_ModuleConfig &c) moduleConfig.paxcounter = c.payload_variant.paxcounter; break; } - saveChanges(SEGMENT_MODULECONFIG); } @@ -1029,3 +1039,16 @@ bool AdminModule::messageIsRequest(meshtastic_AdminMessage *r) else return false; } + +void disableBluetooth() +{ +#if HAS_BLUETOOTH +#ifdef ARCH_ESP32 + if (nimbleBluetooth) + nimbleBluetooth->deinit(); +#elif defined(ARCH_NRF52) + if (nrf52Bluetooth) + nrf52Bluetooth->shutdown(); +#endif +#endif +} \ No newline at end of file diff --git a/src/modules/AdminModule.h b/src/modules/AdminModule.h index 61c54d1b1..328e1c824 100644 --- a/src/modules/AdminModule.h +++ b/src/modules/AdminModule.h @@ -59,4 +59,6 @@ class AdminModule : public ProtobufModule, public Obser bool messageIsRequest(meshtastic_AdminMessage *r); }; -extern AdminModule *adminModule; \ No newline at end of file +extern AdminModule *adminModule; + +void disableBluetooth(); \ No newline at end of file diff --git a/src/modules/CannedMessageModule.cpp b/src/modules/CannedMessageModule.cpp index 4df5a03fc..87a3e8927 100644 --- a/src/modules/CannedMessageModule.cpp +++ b/src/modules/CannedMessageModule.cpp @@ -190,17 +190,17 @@ int CannedMessageModule::handleInputEvent(const InputEvent *event) #if defined(T_WATCH_S3) || defined(RAK14014) if (event->inputEvent == static_cast(meshtastic_ModuleConfig_CannedMessageConfig_InputEventChar_LEFT)) { - this->payload = 0xb4; + this->payload = INPUT_BROKER_MSG_LEFT; } else if (event->inputEvent == static_cast(meshtastic_ModuleConfig_CannedMessageConfig_InputEventChar_RIGHT)) { - this->payload = 0xb7; + this->payload = INPUT_BROKER_MSG_RIGHT; } #else // tweak for left/right events generated via trackball/touch with empty kbchar if (!event->kbchar) { if (event->inputEvent == static_cast(meshtastic_ModuleConfig_CannedMessageConfig_InputEventChar_LEFT)) { - this->payload = 0xb4; + this->payload = INPUT_BROKER_MSG_LEFT; } else if (event->inputEvent == static_cast(meshtastic_ModuleConfig_CannedMessageConfig_InputEventChar_RIGHT)) { - this->payload = 0xb7; + this->payload = INPUT_BROKER_MSG_RIGHT; } } else { // pass the pressed key @@ -222,26 +222,26 @@ int CannedMessageModule::handleInputEvent(const InputEvent *event) // Run modifier key code below, (doesnt inturrupt typing or reset to start screen page) switch (event->kbchar) { - case 0x11: // make screen brighter + case INPUT_BROKER_MSG_BRIGHTNESS_UP: // make screen brighter if (screen) screen->increaseBrightness(); LOG_DEBUG("increasing Screen Brightness\n"); break; - case 0x12: // make screen dimmer + case INPUT_BROKER_MSG_BRIGHTNESS_DOWN: // make screen dimmer if (screen) screen->decreaseBrightness(); LOG_DEBUG("Decreasing Screen Brightness\n"); break; - case 0xf1: // draw modifier (function) symbal + case INPUT_BROKER_MSG_FN_SYMBOL_ON: // draw modifier (function) symbal if (screen) screen->setFunctionSymbal("Fn"); break; - case 0xf2: // remove modifier (function) symbal + case INPUT_BROKER_MSG_FN_SYMBOL_OFF: // remove modifier (function) symbal if (screen) screen->removeFunctionSymbal("Fn"); break; // mute (switch off/toggle) external notifications on fn+m - case 0xac: + case INPUT_BROKER_MSG_MUTE_TOGGLE: if (moduleConfig.external_notification.enabled == true) { if (externalNotificationModule->getMute()) { externalNotificationModule->setMute(false); @@ -257,7 +257,7 @@ int CannedMessageModule::handleInputEvent(const InputEvent *event) } } break; - case 0x9e: // toggle GPS like triple press does + case INPUT_BROKER_MSG_GPS_TOGGLE: // toggle GPS like triple press does #if !MESHTASTIC_EXCLUDE_GPS if (gps != nullptr) { gps->toggleGpsMode(); @@ -267,7 +267,7 @@ int CannedMessageModule::handleInputEvent(const InputEvent *event) showTemporaryMessage("GPS Toggled"); #endif break; - case 0xaf: // fn+space send network ping like double press does + case INPUT_BROKER_MSG_SEND_PING: // fn+space send network ping like double press does service->refreshLocalMeshNode(); if (service->trySendPosition(NODENUM_BROADCAST, true)) { showTemporaryMessage("Position \nUpdate Sent"); @@ -283,7 +283,7 @@ int CannedMessageModule::handleInputEvent(const InputEvent *event) validEvent = true; break; } - if (screen && (event->kbchar != 0xf1)) { + if (screen && (event->kbchar != INPUT_BROKER_MSG_FN_SYMBOL_ON)) { screen->removeFunctionSymbal("Fn"); // remove modifier (function) symbal } } @@ -505,7 +505,7 @@ int32_t CannedMessageModule::runOnce() } } else if (this->runState == CANNED_MESSAGE_RUN_STATE_FREETEXT || this->runState == CANNED_MESSAGE_RUN_STATE_ACTIVE) { switch (this->payload) { - case 0xb4: // left + case INPUT_BROKER_MSG_LEFT: if (this->destSelect == CANNED_MESSAGE_DESTINATION_TYPE_NODE) { size_t numMeshNodes = nodeDB->getNumMeshNodes(); if (this->dest == NODENUM_BROADCAST) { @@ -540,7 +540,7 @@ int32_t CannedMessageModule::runOnce() } } break; - case 0xb7: // right + case INPUT_BROKER_MSG_RIGHT: if (this->destSelect == CANNED_MESSAGE_DESTINATION_TYPE_NODE) { size_t numMeshNodes = nodeDB->getNumMeshNodes(); if (this->dest == NODENUM_BROADCAST) { @@ -602,19 +602,19 @@ int32_t CannedMessageModule::runOnce() this->destSelect = CANNED_MESSAGE_DESTINATION_TYPE_NODE; } break; - case 0xb4: // left - case 0xb7: // right + case INPUT_BROKER_MSG_LEFT: + case INPUT_BROKER_MSG_RIGHT: // already handled above break; // handle fn+s for shutdown - case 0x9b: + case INPUT_BROKER_MSG_SHUTDOWN: if (screen) screen->startAlert("Shutting down..."); shutdownAtMsec = millis() + DEFAULT_SHUTDOWN_SECONDS * 1000; runState = CANNED_MESSAGE_RUN_STATE_INACTIVE; break; // and fn+r for reboot - case 0x90: + case INPUT_BROKER_MSG_REBOOT: if (screen) screen->startAlert("Rebooting..."); rebootAtMsec = millis() + DEFAULT_REBOOT_SECONDS * 1000; diff --git a/src/modules/CannedMessageModule.h b/src/modules/CannedMessageModule.h index 9e6af8890..368574c40 100644 --- a/src/modules/CannedMessageModule.h +++ b/src/modules/CannedMessageModule.h @@ -223,4 +223,4 @@ class CannedMessageModule : public SinglePortModule, public ObservableisConnected()) || (rtc_found.address != ScanI2C::ADDRESS_NONE.address); +#endif return hasGpsOrRtc || setFromPhoneOrNtpToday; } diff --git a/src/modules/PositionModule.h b/src/modules/PositionModule.h index c4ef66501..41b86b795 100644 --- a/src/modules/PositionModule.h +++ b/src/modules/PositionModule.h @@ -63,7 +63,7 @@ class PositionModule : public ProtobufModule, private concu bool hasQualityTimesource(); const uint32_t minimumTimeThreshold = - Default::getConfiguredOrDefaultMsScaled(config.position.broadcast_smart_minimum_interval_secs, 30, numOnlineNodes); + Default::getConfiguredOrDefaultMs(config.position.broadcast_smart_minimum_interval_secs, 30); }; struct SmartPosition { diff --git a/src/modules/Telemetry/DeviceTelemetry.cpp b/src/modules/Telemetry/DeviceTelemetry.cpp index f22685d43..305be9904 100644 --- a/src/modules/Telemetry/DeviceTelemetry.cpp +++ b/src/modules/Telemetry/DeviceTelemetry.cpp @@ -100,8 +100,9 @@ meshtastic_Telemetry DeviceTelemetryModule::getDeviceTelemetry() #if ARCH_PORTDUINO t.variant.device_metrics.battery_level = MAGIC_USB_BATTERY_LEVEL; #else - t.variant.device_metrics.battery_level = - powerStatus->getIsCharging() ? MAGIC_USB_BATTERY_LEVEL : powerStatus->getBatteryChargePercent(); + t.variant.device_metrics.battery_level = (!powerStatus->getHasBattery() || powerStatus->getIsCharging()) + ? MAGIC_USB_BATTERY_LEVEL + : powerStatus->getBatteryChargePercent(); #endif t.variant.device_metrics.channel_utilization = airTime->channelUtilizationPercent(); t.variant.device_metrics.voltage = powerStatus->getBatteryVoltageMv() / 1000.0; diff --git a/src/modules/Telemetry/Sensor/T1000xSensor.cpp b/src/modules/Telemetry/Sensor/T1000xSensor.cpp index 4079d8ae3..4772aeb9e 100644 --- a/src/modules/Telemetry/Sensor/T1000xSensor.cpp +++ b/src/modules/Telemetry/Sensor/T1000xSensor.cpp @@ -95,7 +95,7 @@ float T1000xSensor::getTemp() Vout = ntc_vot; Rt = (HEATER_NTC_RP * vcc_vot) / Vout - HEATER_NTC_RP; - for (u8i = 0; u8i < 136; u8i++) { + for (u8i = 0; u8i < 135; u8i++) { if (Rt >= ntc_res2[u8i]) { break; } diff --git a/src/modules/TraceRouteModule.cpp b/src/modules/TraceRouteModule.cpp index dd3d0b4f9..23b4f1ccf 100644 --- a/src/modules/TraceRouteModule.cpp +++ b/src/modules/TraceRouteModule.cpp @@ -53,7 +53,7 @@ void TraceRouteModule::insertUnknownHops(meshtastic_MeshPacket &p, meshtastic_Ro uint8_t hopsTaken = p.hop_start - p.hop_limit; int8_t diff = hopsTaken - *route_count; for (uint8_t i = 0; i < diff; i++) { - if (*route_count < sizeof(*route) / sizeof(route[0])) { + if (*route_count < ROUTE_SIZE) { route[*route_count] = NODENUM_BROADCAST; // This will represent an unknown hop *route_count += 1; } @@ -61,7 +61,7 @@ void TraceRouteModule::insertUnknownHops(meshtastic_MeshPacket &p, meshtastic_Ro // Add unknown SNR values if necessary diff = *route_count - *snr_count; for (uint8_t i = 0; i < diff; i++) { - if (*snr_count < sizeof(*snr_list) / sizeof(snr_list[0])) { + if (*snr_count < ROUTE_SIZE) { snr_list[*snr_count] = INT8_MIN; // This will represent an unknown SNR *snr_count += 1; } @@ -89,7 +89,7 @@ void TraceRouteModule::appendMyIDandSNR(meshtastic_RouteDiscovery *updated, floa snr_list = updated->snr_back; } - if (*snr_count < sizeof(*snr_list) / sizeof(snr_list[0])) { + if (*snr_count < ROUTE_SIZE) { snr_list[*snr_count] = (int8_t)(snr * 4); // Convert SNR to 1 byte *snr_count += 1; } @@ -97,7 +97,7 @@ void TraceRouteModule::appendMyIDandSNR(meshtastic_RouteDiscovery *updated, floa return; // Length of route array can normally not be exceeded due to the max. hop_limit of 7 - if (*route_count < sizeof(*route) / sizeof(route[0])) { + if (*route_count < ROUTE_SIZE) { route[*route_count] = myNodeInfo.my_node_num; *route_count += 1; } else { diff --git a/src/modules/TraceRouteModule.h b/src/modules/TraceRouteModule.h index fe69300de..afe2b3871 100644 --- a/src/modules/TraceRouteModule.h +++ b/src/modules/TraceRouteModule.h @@ -1,6 +1,8 @@ #pragma once #include "ProtobufModule.h" +#define ROUTE_SIZE sizeof(((meshtastic_RouteDiscovery *)0)->route) / sizeof(((meshtastic_RouteDiscovery *)0)->route[0]) + /** * A module that traces the route to a certain destination node */ diff --git a/src/mqtt/MQTT.cpp b/src/mqtt/MQTT.cpp index 797fc7dc3..d14c7a923 100644 --- a/src/mqtt/MQTT.cpp +++ b/src/mqtt/MQTT.cpp @@ -514,19 +514,29 @@ void MQTT::onSend(const meshtastic_MeshPacket &mp, const meshtastic_MeshPacket & return; // no channels have an uplink enabled auto &ch = channels.getByIndex(chIndex); - if (mp_decoded.which_payload_variant != meshtastic_MeshPacket_decoded_tag) { - LOG_CRIT("MQTT::onSend(): mp_decoded isn't actually decoded\n"); - return; - } + if (!mp.pki_encrypted) { + if (mp_decoded.which_payload_variant != meshtastic_MeshPacket_decoded_tag) { + LOG_CRIT("MQTT::onSend(): mp_decoded isn't actually decoded\n"); + return; + } - if (strcmp(moduleConfig.mqtt.address, default_mqtt_address) == 0 && - (mp_decoded.decoded.portnum == meshtastic_PortNum_RANGE_TEST_APP || - mp_decoded.decoded.portnum == meshtastic_PortNum_DETECTION_SENSOR_APP)) { - LOG_DEBUG("MQTT onSend - Ignoring range test or detection sensor message on public mqtt\n"); - return; - } + // check for the lowest bit of the data bitfield set false, and the use of one of the default keys. + if (mp_decoded.from != nodeDB->getNodeNum() && mp_decoded.decoded.has_bitfield && + !(mp_decoded.decoded.bitfield & BITFIELD_OK_TO_MQTT_MASK) && + (ch.settings.psk.size < 2 || (ch.settings.psk.size == 16 && memcmp(ch.settings.psk.bytes, defaultpsk, 16)) || + (ch.settings.psk.size == 32 && memcmp(ch.settings.psk.bytes, eventpsk, 32)))) { + LOG_INFO("MQTT onSend - Not forwarding packet due to DontMqttMeBro flag\n"); + return; + } - if (ch.settings.uplink_enabled || mp.pki_encrypted) { + if (strcmp(moduleConfig.mqtt.address, default_mqtt_address) == 0 && + (mp_decoded.decoded.portnum == meshtastic_PortNum_RANGE_TEST_APP || + mp_decoded.decoded.portnum == meshtastic_PortNum_DETECTION_SENSOR_APP)) { + LOG_DEBUG("MQTT onSend - Ignoring range test or detection sensor message on public mqtt\n"); + return; + } + } + if (mp.pki_encrypted || ch.settings.uplink_enabled) { const char *channelId = mp.pki_encrypted ? "PKI" : channels.getGlobalId(chIndex); meshtastic_ServiceEnvelope *env = mqttPool.allocZeroed(); @@ -537,7 +547,8 @@ void MQTT::onSend(const meshtastic_MeshPacket &mp, const meshtastic_MeshPacket & if (moduleConfig.mqtt.encryption_enabled) { env->packet = (meshtastic_MeshPacket *)∓ LOG_DEBUG("encrypted message\n"); - } else { + } else if (mp_decoded.which_payload_variant == + meshtastic_MeshPacket_decoded_tag) { // Don't upload a still-encrypted PKI packet env->packet = (meshtastic_MeshPacket *)&mp_decoded; LOG_DEBUG("portnum %i message\n", env->packet->decoded.portnum); } diff --git a/src/platform/esp32/architecture.h b/src/platform/esp32/architecture.h index 3a0420947..19852396a 100644 --- a/src/platform/esp32/architecture.h +++ b/src/platform/esp32/architecture.h @@ -166,10 +166,15 @@ #define HW_VENDOR meshtastic_HardwareModel_HELTEC_VISION_MASTER_E290 #elif defined(HELTEC_MESH_NODE_T114) #define HW_VENDOR meshtastic_HardwareModel_HELTEC_MESH_NODE_T114 + #elif defined(M5STACK_COREBASIC) #define HW_VENDOR meshtastic_HardwareModel_M5STACK_COREBASIC #elif defined(M5STACK_CORE2) #define HW_VENDOR meshtastic_HardwareModel_M5STACK_CORE2 + +#elif defined(SENSECAP_INDICATOR) +#define HW_VENDOR meshtastic_HardwareModel_SENSECAP_INDICATOR + #endif // ----------------------------------------------------------------------------- diff --git a/src/platform/extra_variants/heltec_wireless_tracker/variant.cpp b/src/platform/extra_variants/heltec_wireless_tracker/variant.cpp index 84264ef58..0a19a9c3b 100644 --- a/src/platform/extra_variants/heltec_wireless_tracker/variant.cpp +++ b/src/platform/extra_variants/heltec_wireless_tracker/variant.cpp @@ -10,10 +10,14 @@ void lateInitVariant() { // LOG_DEBUG("Heltec tracker initVariant\n"); -#ifdef VEXT_ENABLE - GpioPin *hwEnable = new GpioHwPin(VEXT_ENABLE); - GpioVirtPin *virtGpsEnable = gps ? gps->enablePin : new GpioVirtPin(); +#ifndef MESHTASTIC_EXCLUDE_GPS + GpioVirtPin *virtGpsEnable = gps ? gps->enablePin : new GpioVirtPin(); +#else + GpioVirtPin *virtGpsEnable = new GpioVirtPin(); +#endif + +#ifndef MESHTASTIC_EXCLUDE_SCREEN // On this board we are actually using the backlightEnable signal to already be controlling a physical enable to the // display controller. But we'd _ALSO_ like to have that signal drive a virtual GPIO. So nest it as needed. GpioVirtPin *virtScreenEnable = new GpioVirtPin(); @@ -25,8 +29,11 @@ void lateInitVariant() // Assume screen is initially powered splitter->set(true); } +#endif +#if defined(VEXT_ENABLE) && (!defined(MESHTASTIC_EXCLUDE_GPS) || !defined(MESHTASTIC_EXCLUDE_SCREEN)) // If either the GPS or the screen is on, turn on the external power regulator + GpioPin *hwEnable = new GpioHwPin(VEXT_ENABLE); new GpioBinaryTransformer(virtGpsEnable, virtScreenEnable, hwEnable, GpioBinaryTransformer::Or); #endif } diff --git a/src/serialization/JSONValue.h b/src/serialization/JSONValue.h index 0380d324b..16d53e89f 100644 --- a/src/serialization/JSONValue.h +++ b/src/serialization/JSONValue.h @@ -40,15 +40,15 @@ class JSONValue public: JSONValue(/*NULL*/); - JSONValue(const char *m_char_value); - JSONValue(const std::string &m_string_value); - JSONValue(bool m_bool_value); - JSONValue(double m_number_value); - JSONValue(int m_integer_value); - JSONValue(unsigned int m_integer_value); - JSONValue(const JSONArray &m_array_value); - JSONValue(const JSONObject &m_object_value); - JSONValue(const JSONValue &m_source); + explicit JSONValue(const char *m_char_value); + explicit JSONValue(const std::string &m_string_value); + explicit JSONValue(bool m_bool_value); + explicit JSONValue(double m_number_value); + explicit JSONValue(int m_integer_value); + explicit JSONValue(unsigned int m_integer_value); + explicit JSONValue(const JSONArray &m_array_value); + explicit JSONValue(const JSONObject &m_object_value); + explicit JSONValue(const JSONValue &m_source); ~JSONValue(); bool IsNull() const; diff --git a/variants/diy/platformio.ini b/variants/diy/platformio.ini index adc10de44..2a55f7a79 100644 --- a/variants/diy/platformio.ini +++ b/variants/diy/platformio.ini @@ -7,7 +7,6 @@ build_flags = ${esp32_base.build_flags} -D DIY_V1 -D EBYTE_E22 - -D OLED_RU -I variants/diy/v1 ; Meshtastic DIY v1.1 new schematic based on ESP32-WROOM-32 & SX1262/SX1268 modules @@ -19,7 +18,6 @@ build_flags = ${esp32_base.build_flags} -D DIY_V1 -D EBYTE_E22 - -D OLED_RU -I variants/diy/v1_1 ; Port to Disaster Radio's ESP32-v3 Dev Board @@ -52,7 +50,6 @@ board_level = extra build_flags = ${nrf52840_base.build_flags} -I variants/diy/nrf52_promicro_diy_xtal -D NRF52_PROMICRO_DIY - -D OLED_RU -L "${platformio.libdeps_dir}/${this.__env__}/bsec2/src/cortex-m4/fpv4-sp-d16-hard" build_src_filter = ${nrf52_base.build_src_filter} +<../variants/diy/nrf52_promicro_diy_xtal> lib_deps = @@ -68,7 +65,6 @@ board_level = extra build_flags = ${nrf52840_base.build_flags} -I variants/diy/nrf52_promicro_diy_tcxo -D NRF52_PROMICRO_DIY - -D OLED_RU -L "${platformio.libdeps_dir}/${this.__env__}/bsec2/src/cortex-m4/fpv4-sp-d16-hard" build_src_filter = ${nrf52_base.build_src_filter} +<../variants/diy/nrf52_promicro_diy_tcxo> lib_deps = diff --git a/variants/radiomaster_900_bandit/variant.h b/variants/radiomaster_900_bandit/variant.h index 0499970f5..0c7417cac 100644 --- a/variants/radiomaster_900_bandit/variant.h +++ b/variants/radiomaster_900_bandit/variant.h @@ -11,12 +11,17 @@ /* I2C SDA and SCL. - 0x18 - STK8XXX Accelerometer, Not supported yet. + 0x18 - STK8XXX Accelerometer 0x3C - SH1115 Display Driver */ #define I2C_SDA 14 #define I2C_SCL 12 +/* + I2C STK8XXX Accelerometer Interrupt PIN to ESP32 Pin 6 - SENSOR_CAPP (GPIO37) +*/ +#define STK8XXX_INT 37 + /* No GPS - but free pins are available. */ diff --git a/variants/rak11200/variant.h b/variants/rak11200/variant.h index 3cd601254..259fa6e87 100644 --- a/variants/rak11200/variant.h +++ b/variants/rak11200/variant.h @@ -70,6 +70,7 @@ static const uint8_t SCK = 33; #define LORA_CS SS #define USE_SX1262 +#define SX126X_ANT_SW WB_IO2 #define SX126X_CS SS // NSS for SX126X #define SX126X_DIO1 LORA_DIO1 #define SX126X_BUSY LORA_DIO2 diff --git a/variants/seeed-sensecap-indicator/pins_arduino.h b/variants/seeed-sensecap-indicator/pins_arduino.h new file mode 100644 index 000000000..300f0e0f5 --- /dev/null +++ b/variants/seeed-sensecap-indicator/pins_arduino.h @@ -0,0 +1,56 @@ +#ifndef Pins_Arduino_h +#define Pins_Arduino_h + +#include + +// static const uint8_t LED_BUILTIN = -1; + +// static const uint8_t TX = 43; +// static const uint8_t RX = 44; + +static const uint8_t SDA = 39; +static const uint8_t SCL = 40; + +// Default SPI will be mapped to Radio +static const uint8_t SS = -1; +static const uint8_t MOSI = 48; +static const uint8_t MISO = 47; +static const uint8_t SCK = 41; + +static const uint8_t A0 = 1; +static const uint8_t A1 = 2; +static const uint8_t A2 = 3; +static const uint8_t A3 = 4; +static const uint8_t A4 = 5; +static const uint8_t A5 = 6; +static const uint8_t A6 = 7; +static const uint8_t A7 = 8; +static const uint8_t A8 = 9; +static const uint8_t A9 = 10; +static const uint8_t A10 = 11; +static const uint8_t A11 = 12; +static const uint8_t A12 = 13; +static const uint8_t A13 = 14; +static const uint8_t A14 = 15; +static const uint8_t A15 = 16; +static const uint8_t A16 = 17; +static const uint8_t A17 = 18; +static const uint8_t A18 = 19; +static const uint8_t A19 = 20; + +static const uint8_t T1 = 1; +static const uint8_t T2 = 2; +static const uint8_t T3 = 3; +static const uint8_t T4 = 4; +static const uint8_t T5 = 5; +static const uint8_t T6 = 6; +static const uint8_t T7 = 7; +static const uint8_t T8 = 8; +static const uint8_t T9 = 9; +static const uint8_t T10 = 10; +static const uint8_t T11 = 11; +static const uint8_t T12 = 12; +static const uint8_t T13 = 13; +static const uint8_t T14 = 14; + +#endif /* Pins_Arduino_h */ \ No newline at end of file diff --git a/variants/seeed-sensecap-indicator/platformio.ini b/variants/seeed-sensecap-indicator/platformio.ini new file mode 100644 index 000000000..e6bb2145e --- /dev/null +++ b/variants/seeed-sensecap-indicator/platformio.ini @@ -0,0 +1,28 @@ +; Seeed Studio SenseCAP Indicator +[env:seeed-sensecap-indicator] +extends = esp32s3_base +platform_packages = + platformio/framework-arduinoespressif32 @ https://github.com/mverch67/arduino-esp32.git#add_tca9535 ; based on 2.0.16 + +board = seeed-sensecap-indicator +board_check = true +upload_protocol = esptool + +build_flags = ${esp32_base.build_flags} + -Ivariants/seeed-sensecap-indicator + -DSENSECAP_INDICATOR + -DCONFIG_ARDUHAL_LOG_COLORS + -DRADIOLIB_DEBUG_SPI=0 + -DRADIOLIB_DEBUG_PROTOCOL=0 + -DRADIOLIB_DEBUG_BASIC=0 + -DRADIOLIB_VERBOSE_ASSERT=0 + -DRADIOLIB_SPI_PARANOID=0 + -DIO_EXPANDER=0x40 + -DIO_EXPANDER_IRQ=42 + ;-DIO_EXPANDER_DEBUG + -DUSE_ARDUINO_HAL_GPIO + +lib_deps = ${esp32s3_base.lib_deps} + https://github.com/mverch67/LovyanGFX#develop + earlephilhower/ESP8266Audio@^1.9.7 + earlephilhower/ESP8266SAM@^1.0.1 \ No newline at end of file diff --git a/variants/seeed-sensecap-indicator/variant.h b/variants/seeed-sensecap-indicator/variant.h new file mode 100644 index 000000000..d7ed329eb --- /dev/null +++ b/variants/seeed-sensecap-indicator/variant.h @@ -0,0 +1,64 @@ +#define I2C_SDA 39 +#define I2C_SCL 40 + +#define BUTTON_PIN 38 +// #define BUTTON_NEED_PULLUP + +// #define BATTERY_PIN 27 // A battery voltage measurement pin, voltage divider connected here to measure battery voltage +// #define ADC_CHANNEL ADC1_GPIO27_CHANNEL +// #define ADC_MULTIPLIER 2 + +// ST7701 TFT LCD +#define ST7701_CS (4 | IO_EXPANDER) +#define ST7701_RS -1 // DC +#define ST7701_SDA 48 // MOSI +#define ST7701_SCK 41 +#define ST7701_RESET (5 | IO_EXPANDER) +#define ST7701_MISO 47 +#define ST7701_BUSY -1 +#define ST7701_BL 45 +#define ST7701_SPI_HOST SPI2_HOST +#define ST7701_BACKLIGHT_EN 45 +#define SPI_FREQUENCY 20000000 +#define SPI_READ_FREQUENCY 16000000 +#define TFT_HEIGHT 480 +#define TFT_WIDTH 480 +#define TFT_OFFSET_X 0 +#define TFT_OFFSET_Y 0 +#define TFT_OFFSET_ROTATION 0 +#define TFT_BL 45 +#define SCREEN_ROTATE +#define SCREEN_TRANSITION_FRAMERATE 5 // fps + +#define HAS_TOUCHSCREEN 1 +#define SCREEN_TOUCH_INT (6 | IO_EXPANDER) +#define SCREEN_TOUCH_RST (7 | IO_EXPANDER) +#define TOUCH_I2C_PORT 0 +#define TOUCH_SLAVE_ADDRESS 0x48 + +// Buzzer +#define PIN_BUZZER 19 + +#define HAS_GPS 0 +#undef GPS_RX_PIN +#undef GPS_TX_PIN + +#define USE_SX1262 +#define USE_SX1268 + +#define LORA_SCK 41 +#define LORA_MISO 47 +#define LORA_MOSI 48 +#define LORA_CS (0 | IO_EXPANDER) + +#define LORA_DIO0 -1 // a no connect on the SX1262 module +#define LORA_RESET (1 | IO_EXPANDER) +#define LORA_DIO1 (3 | IO_EXPANDER) // SX1262 IRQ +#define LORA_DIO2 (2 | IO_EXPANDER) // SX1262 BUSY +#define LORA_DIO3 + +#define SX126X_CS LORA_CS +#define SX126X_DIO1 LORA_DIO1 +#define SX126X_BUSY LORA_DIO2 +#define SX126X_RESET LORA_RESET +#define SX126X_DIO2_AS_RF_SWITCH diff --git a/version.properties b/version.properties index 95d3d2538..69c478482 100644 --- a/version.properties +++ b/version.properties @@ -1,4 +1,4 @@ [VERSION] major = 2 minor = 5 -build = 0 +build = 1