pohui_pohui/firmware
1
0
Fork 0
mirror of https://github.com/meshtastic/firmware.git synced 2025-05-10 15:19:25 +00:00
Code Issues Actions 6 Packages Projects Releases Wiki Activity

Retire lora-relay boards (#4957)

Browse Source 
The lora-relay boards were important pathfinders for nrf52
support some years back. They are no longer commonly produced and
there are now many nrf52 options on the market. Retire these
boards and associated variant.
This commit is contained in:
Tom Fifield 2024-10-05 18:25:28 +08:00 committed by GitHub
parent 6d6ed55ed7
commit 243421b2a5
No known key found for this signature in database
GPG Key ID: B5690EEEBB952194
9 changed files with 1 additions and 705 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

47
boards/lora-relay-v1.json
View File

@ -1,47 +0,0 @@
{
"build": {
"arduino": {
"ldscript": "nrf52840_s140_v6.ld"
},
"core": "nRF5",
"cpu": "cortex-m4",
"extra_flags": "-DARDUINO_NRF52840_LORA_RELAY_V1 -DNRF52840_XXAA",
"f_cpu": "64000000L",
"hwids": [["0x239A", "0x4404"]],
"usb_product": "LORA_RELAY",
"mcu": "nrf52840",
"variant": "lora_relay_v1",
"variants_dir": "variants",
"bsp": {
"name": "adafruit"
},
"softdevice": {
"sd_flags": "-DS140",
"sd_name": "s140",
"sd_version": "6.1.1",
"sd_fwid": "0x00B6"
},
"bootloader": {
"settings_addr": "0xFF000"
}
},
"connectivity": ["bluetooth"],
"debug": {
"jlink_device": "nRF52840_xxAA",
"onboard_tools": ["jlink"],
"svd_path": "nrf52840.svd",
"openocd_target": "nrf52840-mdk-rs"
},
"frameworks": ["arduino"],
"name": "Meshtastic Lora Relay V1 (Adafruit BSP)",
"upload": {
"maximum_ram_size": 248832,
"maximum_size": 815104,
"require_upload_port": true,
"speed": 115200,
"protocol": "jlink",
"protocols": ["jlink", "nrfjprog", "stlink"]
},
"url": "https://github.com/BigCorvus/SX1262-LoRa-BLE-Relay",
"vendor": "BigCorvus"
}

47
boards/lora-relay-v2.json
View File

@ -1,47 +0,0 @@
{
"build": {
"arduino": {
"ldscript": "nrf52840_s140_v6.ld"
},
"core": "nRF5",
"cpu": "cortex-m4",
"extra_flags": "-DARDUINO_NRF52840_LORA_RELAY_V2 -DNRF52840_XXAA",
"f_cpu": "64000000L",
"hwids": [["0x239A", "0x4406"]],
"usb_product": "LORA_RELAY",
"mcu": "nrf52840",
"variant": "lora_relay_v2",
"variants_dir": "variants",
"bsp": {
"name": "adafruit"
},
"softdevice": {
"sd_flags": "-DS140",
"sd_name": "s140",
"sd_version": "6.1.1",
"sd_fwid": "0x00B6"
},
"bootloader": {
"settings_addr": "0xFF000"
}
},
"connectivity": ["bluetooth"],
"debug": {
"jlink_device": "nRF52840_xxAA",
"onboard_tools": ["jlink"],
"svd_path": "nrf52840.svd",
"openocd_target": "nrf52840-mdk-rs"
},
"frameworks": ["arduino"],
"name": "Meshtastic Lora Relay V1 (Adafruit BSP)",
"upload": {
"maximum_ram_size": 248832,
"maximum_size": 815104,
"require_upload_port": true,
"speed": 115200,
"protocol": "jlink",
"protocols": ["jlink", "nrfjprog", "stlink"]
},
"url": "https://github.com/BigCorvus/SX1262-LoRa-BLE-Relay",
"vendor": "BigCorvus"
}

3
platformio.ini
View File

@ -17,11 +17,10 @@ default_envs = tbeam
;default_envs = tlora-v2-1-1_6
;default_envs = tlora-v2-1-1_6-tcxo
;default_envs = tlora-t3s3-v1
;default_envs = lora-relay-v1 # nrf board
;default_envs = t-echo
;default_envs = canaryone
;default_envs = nrf52840dk-geeksville
;default_envs = native # lora-relay-v1 # nrf52840dk-geeksville # linux # or if you'd like to change the default to something like lora-relay-v1 put that here
;default_envs = native
;default_envs = nano-g1
;default_envs = pca10059_diy_eink
;default_envs = meshtastic-diy-v1

24
variants/lora_relay_v1/platformio.ini
View File

@ -1,24 +0,0 @@
; The https://github.com/BigCorvus/SX1262-LoRa-BLE-Relay board by @BigCorvus
[env:lora-relay-v1]
extends = nrf52840_base
board = lora-relay-v1
board_level = extra
# add our variants files to the include and src paths
# define build flags for the TFT_eSPI library
build_flags = ${nrf52840_base.build_flags} -Ivariants/lora_relay_v1
-DUSER_SETUP_LOADED
-DTFT_WIDTH=80
-DTFT_HEIGHT=160
-DST7735_GREENTAB160x80
-DST7735_DRIVER
-DTFT_CS=ST7735_CS
-DTFT_DC=ST7735_RS
-DTFT_RST=ST7735_RESET
-DSPI_FREQUENCY=27000000
-L "${platformio.libdeps_dir}/${this.__env__}/bsec2/src/cortex-m4/fpv4-sp-d16-hard"
build_src_filter = ${nrf52_base.build_src_filter} +<../variants/lora_relay_v1>
lib_deps =
${nrf52840_base.lib_deps}
sparkfun/SparkFun BQ27441 LiPo Fuel Gauge Arduino Library@^1.1.0
bodmer/TFT_eSPI@^2.4.76
adafruit/Adafruit NeoPixel @ ^1.12.0

105
variants/lora_relay_v1/variant.cpp
View File

@ -1,105 +0,0 @@
/*
Copyright (c) 2014-2015 Arduino LLC. All right reserved.
Copyright (c) 2016 Sandeep Mistry All right reserved.
Copyright (c) 2018, Adafruit Industries (adafruit.com)
This library is free software; you can redistribute it and/or
modify it under the terms of the GNU Lesser General Public
License as published by the Free Software Foundation; either
version 2.1 of the License, or (at your option) any later version.
This library is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
See the GNU Lesser General Public License for more details.
You should have received a copy of the GNU Lesser General Public
License along with this library; if not, write to the Free Software
Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*/
#include "variant.h"
#include "nrf.h"
#include "wiring_constants.h"
#include "wiring_digital.h"
const uint32_t g_ADigitalPinMap[] = {
// D0 .. D13
25, // D0 is P0.25 (UART TX)
24, // D1 is P0.24 (UART RX
10, // D2 is P0.10 (NFC2)
47, // D3 is P1.15 (LED1)
42, // D4 is P1.10 (LED2)
40, // D5 is P1.08
7, // D6 is P0.07
34, // D7 is P1.02 (Button)
16, // D8 is P0.16 (NeoPixel)
26, // D9 is P0.26 D_RS (IPS data/command control)
27, // D10 is P0.27
6, // D11 is P0.06 D_RES (IPS display reset)
8, // D12 is P0.08 D_CS (IPS display chip select)
41, // D13 is P1.09 BLT (IPS display backlight)
4, // D14 is P0.04 SX1262 RXEN
5, // D15 is P0.05 BOOST_EN (5V buck converter enable for the the radio power)
// D14 .. D21 (aka A0 .. A7)
30, // D16 is P0.30 (A0)
28, // D17 is P0.28 (A1)
2, // D18 is P0.02 (A2)
3, // D19 is P0.03 (A3)
29, // D20 is P0.29 (A4, Battery)
31, // D21 is P0.31 (A5, ARef)
// D22 .. D23 (aka I2C pins)
12, // D22 is P0.12 (SDA)
11, // D23 is P0.11 (SCL)
// D24 .. D26 (aka SPI pins)
15, // D24 is P0.15 (SPI MISO)
13, // D25 is P0.13 (SPI MOSI)
14, // D26 is P0.14 (SPI SCK )
// QSPI pins (not exposed via any header / test point)
// 19, // P0.19 (QSPI CLK)
// 20, // P0.20 (QSPI CS)
// 17, // P0.17 (QSPI Data 0)
// 22, // P0.22 (QSPI Data 1)
// 23, // P0.23 (QSPI Data 2)
// 21, // P0.21 (QSPI Data 3)
// The remaining NFC pin
9, // D27 P0.09 (NFC1, exposed only via test point on bottom of board)
// The following pins were never listed as they were considered unusable
// 0, // P0.00 is XL1 (attached to 32.768kHz crystal) Never expose as GPIOs
// 1, // P0.01 is XL2 (attached to 32.768kHz crystal)
18, // D28 P0.18 is RESET (attached to switch)
// 32, // P1.00 is SWO (attached to debug header)
// D29-D43
27, // D29 P0.27 E22-SX1262 DIO1
28, // D30 P0.28 E22-SX1262 DIO2
30, // D31 P0.30 E22-SX1262 TXEN
35, // D32 P1.03 E22-SX1262 NSS
32 + 8, // D33 P1.08 E22-SX1262 BUSY
32 + 12, // D34 P1.12 E22-SX1262 RESET
32 + 1, // P1.01 BTN_UP
32 + 2, // P1.02 SWITCH
32 + 14, // D37 P1.14 is not connected per schematic
36, // P1.04 is not connected per schematic
37, // P1.05 is not connected per schematic
38, // P1.06 is not connected per schematic
39, // P1.07 is not connected per schematic
43, // P1.11 is not connected per schematic
45, // P1.13 is not connected per schematic
};
void initVariant()
{
// LED1 & LED2
pinMode(PIN_LED1, OUTPUT);
ledOff(PIN_LED1);
pinMode(PIN_LED2, OUTPUT);
ledOff(PIN_LED2);
}

161
variants/lora_relay_v1/variant.h
View File

@ -1,161 +0,0 @@
/*
Copyright (c) 2014-2015 Arduino LLC. All right reserved.
Copyright (c) 2016 Sandeep Mistry All right reserved.
Copyright (c) 2018, Adafruit Industries (adafruit.com)
This library is free software; you can redistribute it and/or
modify it under the terms of the GNU Lesser General Public
License as published by the Free Software Foundation; either
version 2.1 of the License, or (at your option) any later version.
This library is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
See the GNU Lesser General Public License for more details.
You should have received a copy of the GNU Lesser General Public
License along with this library; if not, write to the Free Software
Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*/
#ifndef _VARIANT_LORA_RELAY_V1_
#define _VARIANT_LORA_RELAY_V1_
/** Master clock frequency */
#define VARIANT_MCK (64000000ul)
#define USE_LFXO // Board uses 32khz crystal for LF
// define USE_LFRC // Board uses RC for LF
/*----------------------------------------------------------------------------
* Headers
*----------------------------------------------------------------------------*/
#include "WVariant.h"
#ifdef __cplusplus
extern "C" {
#endif // __cplusplus
// Number of pins defined in PinDescription array
#define PINS_COUNT (43)
#define NUM_DIGITAL_PINS (43)
#define NUM_ANALOG_INPUTS (6) // A6 is used for battery, A7 is analog reference
#define NUM_ANALOG_OUTPUTS (0)
// LEDs
#define PIN_LED1 (3)
#define PIN_LED2 (4)
// #define PIN_NEOPIXEL (8)
#define HAS_NEOPIXEL // Enable the use of neopixels
#define NEOPIXEL_COUNT 1 // How many neopixels are connected
#define NEOPIXEL_DATA 8 // gpio pin used to send data to the neopixels
#define NEOPIXEL_TYPE (NEO_GRB + NEO_KHZ800) // type of neopixels in use
#define LED_BUILTIN PIN_LED1
#define LED_CONN PIN_LED2
#define LED_RED PIN_LED1
#define LED_BLUE PIN_LED2
#define LED_STATE_ON 1 // State when LED is litted
/*
* Buttons
*/
#define PIN_BUTTON1 (7)
/*
* Analog pins
*/
#define PIN_A0 (16)
#define PIN_A1 (17)
#define PIN_A2 (18)
#define PIN_A3 (19)
#define PIN_A4 (20)
#define PIN_A5 (21)
static const uint8_t A0 = PIN_A0;
static const uint8_t A1 = PIN_A1;
static const uint8_t A2 = PIN_A2;
static const uint8_t A3 = PIN_A3;
static const uint8_t A4 = PIN_A4;
static const uint8_t A5 = PIN_A5;
#define ADC_RESOLUTION 14
// Other pins
#define PIN_AREF PIN_A5
#define PIN_VBAT PIN_A4
#define BATTERY_PIN PIN_VBAT
#define PIN_NFC1 (33)
#define PIN_NFC2 (2)
#define PIN_PIEZO (37)
static const uint8_t AREF = PIN_AREF;
/*
* Serial interfaces
*/
#define PIN_SERIAL1_RX (1)
#define PIN_SERIAL1_TX (0)
/*
* SPI Interfaces
*/
#define SPI_INTERFACES_COUNT 1
#define PIN_SPI_MISO (24)
#define PIN_SPI_MOSI (25)
#define PIN_SPI_SCK (26)
static const uint8_t SS = (5);
static const uint8_t MOSI = PIN_SPI_MOSI;
static const uint8_t MISO = PIN_SPI_MISO;
static const uint8_t SCK = PIN_SPI_SCK;
/*
* Wire Interfaces
*/
#define WIRE_INTERFACES_COUNT 1
#define PIN_WIRE_SDA (22)
#define PIN_WIRE_SCL (23)
// I2C device addresses
#define I2C_ADDR_BQ27441 0x55 // Battery gauge
// SX1262 declaration
#define USE_SX1262
// CUSTOM GPIOs the SX1262
#define SX126X_CS (32)
// If you would prefer to get console debug output over the JTAG ICE connection rather than the CDC-ACM USB serial device, just
// define this. #define USE_SEGGER
#define SX126X_DIO1 (29)
#define SX1262_DIO2 (30)
#define SX126X_BUSY (33) // Supposed to be P0.18 but because of reworks, now on P0.31 (18)
#define SX126X_RESET (34)
// #define SX126X_ANT_SW (32 + 10)
#define SX126X_RXEN (14)
#define SX126X_TXEN (31)
#define SX126X_POWER_EN \
(15) // FIXME, see warning hre https://github.com/BigCorvus/SX1262-LoRa-BLE-Relay/blob/master/LORA_RELAY_NRF52840.ino
// Indicates this SX1262 is inside of an ebyte E22 module and special config should be done for that
#define SX126X_DIO3_TCXO_VOLTAGE 1.8
#define ST7735_RESET (11) // Output
#define ST7735_CS (12)
#define TFT_BL (13)
#define ST7735_RS (9)
// #define LORA_DISABLE_SENDING // The board can brownout during lora TX if you don't have a battery connected. Disable sending
// to allow USB power only based debugging
#ifdef __cplusplus
}
#endif
/*----------------------------------------------------------------------------
* Arduino objects - C++ only
*----------------------------------------------------------------------------*/
#endif

26
variants/lora_relay_v2/platformio.ini
View File

@ -1,26 +0,0 @@
; The https://github.com/BigCorvus/LoRa-BLE-Relay-v2 board by @BigCorvus
[env:lora-relay-v2]
extends = nrf52840_base
board = lora-relay-v2
board_level = extra
# add our variants files to the include and src paths
# define build flags for the TFT_eSPI library
build_flags = ${nrf52840_base.build_flags} -Ivariants/lora_relay_v2
-DUSER_SETUP_LOADED
-DTFT_WIDTH=80
-DTFT_HEIGHT=160
-DST7735_GREENTAB160x80
-DST7735_DRIVER
-DTFT_CS=ST7735_CS
-DTFT_DC=ST7735_RS
-DTFT_RST=ST7735_RESET
-DSPI_FREQUENCY=27000000
-DTFT_WR=ST7735_SDA
-DTFT_SCLK=ST7735_SCK
-L "${platformio.libdeps_dir}/${this.__env__}/bsec2/src/cortex-m4/fpv4-sp-d16-hard"
build_src_filter = ${nrf52_base.build_src_filter} +<../variants/lora_relay_v2>
lib_deps =
${nrf52840_base.lib_deps}
sparkfun/SparkFun BQ27441 LiPo Fuel Gauge Arduino Library@^1.1.0
bodmer/TFT_eSPI@^2.4.76
adafruit/Adafruit NeoPixel @ ^1.12.0

105
variants/lora_relay_v2/variant.cpp
View File

@ -1,105 +0,0 @@
/*
Copyright (c) 2014-2015 Arduino LLC. All right reserved.
Copyright (c) 2016 Sandeep Mistry All right reserved.
Copyright (c) 2018, Adafruit Industries (adafruit.com)
This library is free software; you can redistribute it and/or
modify it under the terms of the GNU Lesser General Public
License as published by the Free Software Foundation; either
version 2.1 of the License, or (at your option) any later version.
This library is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
See the GNU Lesser General Public License for more details.
You should have received a copy of the GNU Lesser General Public
License along with this library; if not, write to the Free Software
Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*/
#include "variant.h"
#include "nrf.h"
#include "wiring_constants.h"
#include "wiring_digital.h"
const uint32_t g_ADigitalPinMap[] = {
// D0 .. D13
25, // D0 is P0.25 (UART TX)
24, // D1 is P0.24 (UART RX
10, // D2 is P0.10 (NFC2)
47, // D3 is P1.15 (LED1)
(32 + 10), // D4 is P1.10 (LED2)
40, // D5 is P1.08
7, // D6 is P0.07
34, // D7 is P1.02 (Switch)
16, // D8 is P0.16 (NeoPixel)
26, // D9 is P0.26 D_RS (IPS data/command control)
27, // D10 is P0.27
6, // D11 is P0.06 D_RES (IPS display reset)
8, // D12 is P0.08 D_CS (IPS display chip select)
41, // D13 is P0.23 BLT (IPS display backlight)
4, // D14 is P0.04 SX1262 RXEN
5, // D15 is P0.05 BOOST_EN (5V buck converter enable for the the radio power)
// D14 .. D21 (aka A0 .. A7)
30, // D16 is P0.30 (A0)
28, // D17 is P0.28 (A1)
2, // D18 is P0.02 (A2)
3, // D19 is P0.03 (A3)
29, // D20 is P0.29 (A4, Battery)
31, // D21 is P0.31 (A5, ARef)
// D22 .. D23 (aka I2C pins)
12, // D22 is P0.12 (SDA)
11, // D23 is P0.11 (SCL)
// D24 .. D26 (aka SPI pins)
15, // D24 is P0.15 (SPI MISO)
13, // D25 is P0.13 (SPI MOSI)
14, // D26 is P0.14 (SPI SCK )
// QSPI pins (not exposed via any header / test point)
// 19, // P0.19 (QSPI CLK)
// 20, // P0.20 (QSPI CS)
// 17, // P0.17 (QSPI Data 0)
// 22, // P0.22 (QSPI Data 1)
// 23, // P0.23 (QSPI Data 2)
// 21, // P0.21 (QSPI Data 3)
// The remaining NFC pin
9, // D27 P0.09 (NFC1, exposed only via test point on bottom of board)
// The following pins were never listed as they were considered unusable
// 0, // P0.00 is XL1 (attached to 32.768kHz crystal) Never expose as GPIOs
// 1, // P0.01 is XL2 (attached to 32.768kHz crystal)
18, // D28 P0.18 is RESET (attached to switch)
// 32, // P1.00 is SWO (attached to debug header)
// D29-D43
32 + 12, // D29 P0.27 E22-SX1262 DIO1
28, // D30 P0.28 E22-SX1262 DIO2
30, // D31 P0.30 E22-SX1262 TXEN
35, // D32 P1.03 E22-SX1262 NSS
32 + 8, // D33 P1.08 E22-SX1262 BUSY
27, // D34 P0.27 E22-SX1262 RESET
32 + 1, // D35 P1.01 BTN_UP
32, // D36 P1.0 GPS power
21, // D37 P0.21 disp_clk
36, // P1.04 BTN_OK
37, // D39 P0.19 disp_SDA
38, // D40 P1.06 BUZZER
39, // P1.07 is not connected per schematic
43, // P1.11 is not connected per schematic
45, // P1.13 is not connected per schematic
};
void initVariant()
{
// LED1 & LED2
pinMode(PIN_LED1, OUTPUT);
ledOff(PIN_LED1);
pinMode(PIN_LED2, OUTPUT);
ledOff(PIN_LED2);
}

188
variants/lora_relay_v2/variant.h
View File

@ -1,188 +0,0 @@
/*
Copyright (c) 2014-2015 Arduino LLC. All right reserved.
Copyright (c) 2016 Sandeep Mistry All right reserved.
Copyright (c) 2018, Adafruit Industries (adafruit.com)
This library is free software; you can redistribute it and/or
modify it under the terms of the GNU Lesser General Public
License as published by the Free Software Foundation; either
version 2.1 of the License, or (at your option) any later version.
This library is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
See the GNU Lesser General Public License for more details.
You should have received a copy of the GNU Lesser General Public
License along with this library; if not, write to the Free Software
Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*/
#ifndef _VARIANT_LORA_RELAY_V1_
#define _VARIANT_LORA_RELAY_V1_
/** Master clock frequency */
#define VARIANT_MCK (64000000ul)
#define USE_LFXO // Board uses 32khz crystal for LF
// define USE_LFRC // Board uses RC for LF
/*
kevinh todo
ok leds
ok buttons
ok gps power
ok gps signal
ok? lcd
ok buzzer
serial flash
ok lora (inc boost en)
mention dat1 and dat2 on sd card
use hardware spi controller for lcd - not bitbang
*/
/*----------------------------------------------------------------------------
* Headers
*----------------------------------------------------------------------------*/
#include "WVariant.h"
#ifdef __cplusplus
extern "C" {
#endif // __cplusplus
// Number of pins defined in PinDescription array
#define PINS_COUNT (43)
#define NUM_DIGITAL_PINS (43)
#define NUM_ANALOG_INPUTS (6) // A6 is used for battery, A7 is analog reference
#define NUM_ANALOG_OUTPUTS (0)
// LEDs
#define PIN_LED1 (3)
#define PIN_LED2 (4)
// #define PIN_NEOPIXEL (8)
#define HAS_NEOPIXEL // Enable the use of neopixels
#define NEOPIXEL_COUNT 1 // How many neopixels are connected
#define NEOPIXEL_DATA 8 // gpio pin used to send data to the neopixels
#define NEOPIXEL_TYPE (NEO_GRB + NEO_KHZ800) // type of neopixels in use
#define PIN_BUZZER (40)
#define LED_BUILTIN PIN_LED1
#define LED_CONN PIN_LED2
#define LED_RED PIN_LED1
#define LED_BLUE PIN_LED2
#define LED_STATE_ON 1 // State when LED is litted
/*
* Buttons
*/
#define PIN_BUTTON1 (7)
#define PIN_BUTTON2 (35)
#define PIN_BUTTON3 (37)
/*
* Analog pins
*/
#define PIN_A0 (16)
#define PIN_A1 (17)
#define PIN_A2 (18)
#define PIN_A3 (19)
#define PIN_A4 (20)
#define PIN_A5 (21)
static const uint8_t A0 = PIN_A0;
static const uint8_t A1 = PIN_A1;
static const uint8_t A2 = PIN_A2;
static const uint8_t A3 = PIN_A3;
static const uint8_t A4 = PIN_A4;
static const uint8_t A5 = PIN_A5;
#define ADC_RESOLUTION 14
// Other pins
#define PIN_AREF PIN_A5
#define PIN_VBAT PIN_A4
#define BATTERY_PIN PIN_VBAT
#define PIN_NFC1 (33)
#define PIN_NFC2 (2)
#define PIN_PIEZO (37)
static const uint8_t AREF = PIN_AREF;
/*
* Serial interfaces
*/
#define PIN_SERIAL1_RX (1)
#define PIN_SERIAL1_TX (0)
/*
* SPI Interfaces
*/
#define SPI_INTERFACES_COUNT 1
#define PIN_SPI_MISO (24)
#define PIN_SPI_MOSI (25)
#define PIN_SPI_SCK (26)
static const uint8_t SS = (5);
static const uint8_t MOSI = PIN_SPI_MOSI;
static const uint8_t MISO = PIN_SPI_MISO;
static const uint8_t SCK = PIN_SPI_SCK;
/*
* Wire Interfaces
*/
#define WIRE_INTERFACES_COUNT 1
#define PIN_WIRE_SDA (22)
#define PIN_WIRE_SCL (23)
// I2C device addresses
#define I2C_ADDR_BQ27441 0x55 // Battery gauge
// SX1262 declaration
#define USE_SX1262
// CUSTOM GPIOs the SX1262
#define SX126X_CS (32)
// If you would prefer to get console debug output over the JTAG ICE connection rather than the CDC-ACM USB serial device, just
// define this. #define USE_SEGGER
#define SX126X_DIO1 (29)
#define SX1262_DIO2 (30)
#define SX126X_BUSY (33) // Supposed to be P0.18 but because of reworks, now on P0.31 (18)
#define SX126X_RESET (34)
// #define SX126X_ANT_SW (32 + 10)
#define SX126X_RXEN (14)
#define SX126X_TXEN (31)
#define SX126X_POWER_EN \
(15) // FIXME, see warning hre https://github.com/BigCorvus/SX1262-LoRa-BLE-Relay/blob/master/LORA_RELAY_NRF52840.ino
// Indicates this SX1262 is inside of an ebyte E22 module and special config should be done for that
#define SX126X_DIO3_TCXO_VOLTAGE 1.8
// ST7565 SPI
#define ST7735_RESET (11) // Output
#define ST7735_CS (12)
#define TFT_BL (13)
#define ST7735_RS (9)
#define ST7735_SDA (39) // actually spi MOSI
#define ST7735_SCK (37) // actually spi clk
#define PIN_GPS_EN 36 // Just kill GPS power when we want it to sleep? FIXME
#define GPS_EN_ACTIVE 0 // GPS Power output is active low
// #define LORA_DISABLE_SENDING // The board can brownout during lora TX if you don't have a battery connected. Disable sending
// to allow USB power only based debugging
#ifdef __cplusplus
}
#endif
/*----------------------------------------------------------------------------
* Arduino objects - C++ only
*----------------------------------------------------------------------------*/
#endif