mirror of
https://github.com/meshtastic/firmware.git
synced 2025-06-09 06:32:06 +00:00
Basic T-Deck support (#2630)
* add hwid for auto-detection * fix: heltec-wireless-tracker USB serial * T-Deck support * trunk fmt * set FRAMERATE to 1 * fix some defines * trunk fmt * corrected vendor link
This commit is contained in:
Manuel
GitHub
parent
77efbb3f5d
commit
2486892e6d
40
boards/t-deck.json
Normal file
40
boards/t-deck.json
Normal file
@ -0,0 +1,40 @@
|
||||
{
|
||||
"build": {
|
||||
"arduino": {
|
||||
"ldscript": "esp32s3_out.ld"
|
||||
},
|
||||
"core": "esp32",
|
||||
"extra_flags": [
|
||||
"-DBOARD_HAS_PSRAM",
|
||||
"-DARDUINO_USB_CDC_ON_BOOT=1",
|
||||
"-DARDUINO_USB_MODE=0",
|
||||
"-DARDUINO_RUNNING_CORE=1",
|
||||
"-DARDUINO_EVENT_RUNNING_CORE=0"
|
||||
],
|
||||
"f_cpu": "240000000L",
|
||||
"f_flash": "80000000L",
|
||||
"flash_mode": "dio",
|
||||
"hwids": [["0x303A", "0x1001"]],
|
||||
"mcu": "esp32s3",
|
||||
"variant": "t-deck"
|
||||
},
|
||||
"connectivity": ["wifi", "bluetooth", "lora"],
|
||||
"debug": {
|
||||
"default_tool": "esp-builtin",
|
||||
"onboard_tools": ["esp-builtin"],
|
||||
"openocd_target": "esp32s3.cfg"
|
||||
},
|
||||
"frameworks": ["arduino", "espidf"],
|
||||
"name": "Espressif Systems LilyGO T-Deck (16 MB FLASH, 8 MB PSRAM)",
|
||||
"upload": {
|
||||
"flash_size": "16MB",
|
||||
"maximum_ram_size": 327680,
|
||||
"maximum_size": 16777216,
|
||||
"use_1200bps_touch": true,
|
||||
"wait_for_upload_port": true,
|
||||
"require_upload_port": true,
|
||||
"speed": 921600
|
||||
},
|
||||
"url": "https://www.lilygo.cc/en-pl/products/t-deck",
|
||||
"vendor": "LilyGO"
|
||||
}
|
||||
@ -8,6 +8,8 @@
|
||||
#ifdef SDCARD_USE_SPI1
|
||||
SPIClass SPI1(HSPI);
|
||||
#define SDHandler SPI1
|
||||
#else
|
||||
#define SDHandler SPI
|
||||
#endif
|
||||
|
||||
#endif // HAS_SDCARD
|
||||
|
||||
@ -102,7 +102,7 @@ static uint16_t displayWidth, displayHeight;
|
||||
#define SCREEN_WIDTH displayWidth
|
||||
#define SCREEN_HEIGHT displayHeight
|
||||
|
||||
#if defined(USE_EINK) || defined(ILI9341_DRIVER) || defined(ST7735_CS)
|
||||
#if defined(USE_EINK) || defined(ILI9341_DRIVER) || defined(ST7735_CS) || defined(ST7789_CS)
|
||||
// The screen is bigger so use bigger fonts
|
||||
#define FONT_SMALL ArialMT_Plain_16 // Height: 19
|
||||
#define FONT_MEDIUM ArialMT_Plain_24 // Height: 28
|
||||
@ -492,7 +492,7 @@ static void drawNodes(OLEDDisplay *display, int16_t x, int16_t y, NodeStatus *no
|
||||
{
|
||||
char usersString[20];
|
||||
snprintf(usersString, sizeof(usersString), "%d/%d", nodeStatus->getNumOnline(), nodeStatus->getNumTotal());
|
||||
#if defined(USE_EINK) || defined(ILI9341_DRIVER) || defined(ST7735_CS)
|
||||
#if defined(USE_EINK) || defined(ILI9341_DRIVER) || defined(ST7735_CS) || defined(ST7789_CS)
|
||||
display->drawFastImage(x, y + 3, 8, 8, imgUser);
|
||||
#else
|
||||
display->drawFastImage(x, y, 8, 8, imgUser);
|
||||
@ -1482,7 +1482,7 @@ void DebugInfo::drawFrame(OLEDDisplay *display, OLEDDisplayUiState *state, int16
|
||||
#ifdef ARCH_ESP32
|
||||
if (millis() - storeForwardModule->lastHeartbeat >
|
||||
(storeForwardModule->heartbeatInterval * 1200)) { // no heartbeat, overlap a bit
|
||||
#if defined(USE_EINK) || defined(ILI9341_DRIVER) || defined(ST7735_CS)
|
||||
#if defined(USE_EINK) || defined(ILI9341_DRIVER) || defined(ST7735_CS) || defined(ST7789_CS)
|
||||
display->drawFastImage(x + SCREEN_WIDTH - 14 - display->getStringWidth(ourId), y + 3 + FONT_HEIGHT_SMALL, 12, 8,
|
||||
imgQuestionL1);
|
||||
display->drawFastImage(x + SCREEN_WIDTH - 14 - display->getStringWidth(ourId), y + 11 + FONT_HEIGHT_SMALL, 12, 8,
|
||||
@ -1492,7 +1492,7 @@ void DebugInfo::drawFrame(OLEDDisplay *display, OLEDDisplayUiState *state, int16
|
||||
imgQuestion);
|
||||
#endif
|
||||
} else {
|
||||
#if defined(USE_EINK) || defined(ILI9341_DRIVER) || defined(ST7735_CS)
|
||||
#if defined(USE_EINK) || defined(ILI9341_DRIVER) || defined(ST7735_CS) || defined(ST7789_CS)
|
||||
display->drawFastImage(x + SCREEN_WIDTH - 18 - display->getStringWidth(ourId), y + 3 + FONT_HEIGHT_SMALL, 16, 8,
|
||||
imgSFL1);
|
||||
display->drawFastImage(x + SCREEN_WIDTH - 18 - display->getStringWidth(ourId), y + 11 + FONT_HEIGHT_SMALL, 16, 8,
|
||||
@ -1504,7 +1504,7 @@ void DebugInfo::drawFrame(OLEDDisplay *display, OLEDDisplayUiState *state, int16
|
||||
}
|
||||
#endif
|
||||
} else {
|
||||
#if defined(USE_EINK) || defined(ILI9341_DRIVER) || defined(ST7735_CS)
|
||||
#if defined(USE_EINK) || defined(ILI9341_DRIVER) || defined(ST7735_CS) || defined(ST7789_CS)
|
||||
display->drawFastImage(x + SCREEN_WIDTH - 14 - display->getStringWidth(ourId), y + 3 + FONT_HEIGHT_SMALL, 12, 8,
|
||||
imgInfoL1);
|
||||
display->drawFastImage(x + SCREEN_WIDTH - 14 - display->getStringWidth(ourId), y + 11 + FONT_HEIGHT_SMALL, 12, 8,
|
||||
|
||||
@ -380,7 +380,7 @@ class Screen : public concurrency::OSThread
|
||||
SH1106Wire dispdev;
|
||||
#elif defined(USE_SSD1306)
|
||||
SSD1306Wire dispdev;
|
||||
#elif defined(ST7735_CS) || defined(ILI9341_DRIVER)
|
||||
#elif defined(ST7735_CS) || defined(ILI9341_DRIVER) || defined(ST7789_CS)
|
||||
TFTDisplay dispdev;
|
||||
#elif defined(USE_EINK)
|
||||
EInkDisplay dispdev;
|
||||
|
||||
@ -96,6 +96,118 @@ class LGFX : public lgfx::LGFX_Device
|
||||
|
||||
static LGFX tft;
|
||||
|
||||
#elif defined(ST7789_CS)
|
||||
#include <LovyanGFX.hpp> // Graphics and font library for ST7735 driver chip
|
||||
|
||||
#if defined(ST7789_BACKLIGHT_EN) && !defined(TFT_BL)
|
||||
#define TFT_BL ST7789_BACKLIGHT_EN
|
||||
#endif
|
||||
|
||||
class LGFX : public lgfx::LGFX_Device
|
||||
{
|
||||
lgfx::Panel_ST7789 _panel_instance;
|
||||
lgfx::Bus_SPI _bus_instance;
|
||||
lgfx::Light_PWM _light_instance;
|
||||
lgfx::Touch_GT911 _touch_instance;
|
||||
|
||||
public:
|
||||
LGFX(void)
|
||||
{
|
||||
{
|
||||
auto cfg = _bus_instance.config();
|
||||
|
||||
// SPI
|
||||
cfg.spi_host = ST7789_SPI_HOST;
|
||||
cfg.spi_mode = 0;
|
||||
cfg.freq_write = SPI_FREQUENCY; // SPI clock for transmission (up to 80MHz, rounded to the value obtained by dividing
|
||||
// 80MHz by an integer)
|
||||
cfg.freq_read = SPI_READ_FREQUENCY; // SPI clock when receiving
|
||||
cfg.spi_3wire = false; // Set to true if reception is done on the MOSI pin
|
||||
cfg.use_lock = true; // Set to true to use transaction locking
|
||||
cfg.dma_channel = SPI_DMA_CH_AUTO; // SPI_DMA_CH_AUTO; // Set DMA channel to use (0=not use DMA / 1=1ch / 2=ch /
|
||||
cfg.pin_sclk = ST7789_SCK; // Set SPI SCLK pin number
|
||||
cfg.pin_mosi = ST7789_SDA; // Set SPI MOSI pin number
|
||||
cfg.pin_miso = ST7789_MISO; // Set SPI MISO pin number (-1 = disable)
|
||||
cfg.pin_dc = ST7789_RS; // Set SPI DC pin number (-1 = disable)
|
||||
|
||||
_bus_instance.config(cfg); // applies the set value to the bus.
|
||||
_panel_instance.setBus(&_bus_instance); // set the bus on the panel.
|
||||
}
|
||||
|
||||
{ // Set the display panel control.
|
||||
auto cfg = _panel_instance.config(); // Gets a structure for display panel settings.
|
||||
|
||||
cfg.pin_cs = ST7789_CS; // Pin number where CS is connected (-1 = disable)
|
||||
cfg.pin_rst = -1; // Pin number where RST is connected (-1 = disable)
|
||||
cfg.pin_busy = -1; // Pin number where BUSY is connected (-1 = disable)
|
||||
|
||||
// The following setting values are general initial values for each panel, so please comment out any
|
||||
// unknown items and try them.
|
||||
|
||||
cfg.panel_width = TFT_WIDTH; // actual displayable width
|
||||
cfg.panel_height = TFT_HEIGHT; // actual displayable height
|
||||
cfg.offset_x = TFT_OFFSET_X; // Panel offset amount in X direction
|
||||
cfg.offset_y = TFT_OFFSET_Y; // Panel offset amount in Y direction
|
||||
cfg.offset_rotation = 0; // Rotation direction value offset 0~7 (4~7 is mirrored)
|
||||
cfg.dummy_read_pixel = 9; // Number of bits for dummy read before pixel readout
|
||||
cfg.dummy_read_bits = 1; // Number of bits for dummy read before non-pixel data read
|
||||
cfg.readable = true; // Set to true if data can be read
|
||||
cfg.invert = true; // Set to true if the light/darkness of the panel is reversed
|
||||
cfg.rgb_order = false; // Set to true if the panel's red and blue are swapped
|
||||
cfg.dlen_16bit =
|
||||
false; // Set to true for panels that transmit data length in 16-bit units with 16-bit parallel or SPI
|
||||
cfg.bus_shared = true; // If the bus is shared with the SD card, set to true (bus control with drawJpgFile etc.)
|
||||
|
||||
// Set the following only when the display is shifted with a driver with a variable number of pixels, such as the
|
||||
// ST7735 or ILI9163.
|
||||
// cfg.memory_width = TFT_WIDTH; // Maximum width supported by the driver IC
|
||||
// cfg.memory_height = TFT_HEIGHT; // Maximum height supported by the driver IC
|
||||
_panel_instance.config(cfg);
|
||||
}
|
||||
|
||||
// Set the backlight control. (delete if not necessary)
|
||||
{
|
||||
auto cfg = _light_instance.config(); // Gets a structure for backlight settings.
|
||||
|
||||
cfg.pin_bl = ST7789_BL; // Pin number to which the backlight is connected
|
||||
cfg.invert = true; // true to invert the brightness of the backlight
|
||||
// cfg.pwm_channel = 0;
|
||||
|
||||
_light_instance.config(cfg);
|
||||
_panel_instance.setLight(&_light_instance); // Set the backlight on the panel.
|
||||
}
|
||||
|
||||
// Configure settings for touch screen control.
|
||||
{
|
||||
auto cfg = _touch_instance.config();
|
||||
|
||||
cfg.pin_cs = -1;
|
||||
cfg.x_min = 0;
|
||||
cfg.x_max = TFT_HEIGHT - 1;
|
||||
cfg.y_min = 0;
|
||||
cfg.y_max = TFT_WIDTH - 1;
|
||||
cfg.pin_int = SCREEN_TOUCH_INT;
|
||||
cfg.bus_shared = true;
|
||||
cfg.offset_rotation = 0;
|
||||
// cfg.freq = 2500000;
|
||||
|
||||
// I2C
|
||||
cfg.i2c_port = 1;
|
||||
cfg.i2c_addr = TOUCH_SLAVE_ADDRESS;
|
||||
cfg.pin_sda = I2C_SDA;
|
||||
cfg.pin_scl = I2C_SCL;
|
||||
cfg.freq = 400000;
|
||||
|
||||
_touch_instance.config(cfg);
|
||||
_panel_instance.setTouch(&_touch_instance);
|
||||
}
|
||||
|
||||
setPanel(&_panel_instance); // Sets the panel to use.
|
||||
}
|
||||
};
|
||||
|
||||
static LGFX tft;
|
||||
|
||||
#elif defined(ST7735_CS) || defined(ILI9341_DRIVER)
|
||||
#include <TFT_eSPI.h> // Graphics and font library for ILI9341 driver chip
|
||||
|
||||
@ -103,7 +215,7 @@ static TFT_eSPI tft = TFT_eSPI(); // Invoke library, pins defined in User_Setup.
|
||||
|
||||
#endif
|
||||
|
||||
#if defined(ST7735_CS) || defined(ILI9341_DRIVER)
|
||||
#if defined(ST7735_CS) || defined(ST7789_CS) || defined(ILI9341_DRIVER)
|
||||
#include "SPILock.h"
|
||||
#include "TFTDisplay.h"
|
||||
#include <SPI.h>
|
||||
@ -190,8 +302,8 @@ bool TFTDisplay::connect()
|
||||
#endif
|
||||
|
||||
tft.init();
|
||||
#ifdef M5STACK
|
||||
tft.setRotation(1); // M5Stack has the TFT in landscape
|
||||
#if defined(M5STACK) || defined(T_DECK)
|
||||
tft.setRotation(1); // M5Stack/T-Deck have the TFT in landscape
|
||||
#else
|
||||
tft.setRotation(3); // Orient horizontal and wide underneath the silkscreen name label
|
||||
#endif
|
||||
|
||||
@ -14,7 +14,7 @@ const uint8_t imgUser[] PROGMEM = {0x3C, 0x42, 0x99, 0xA5, 0xA5, 0x99, 0x42, 0x3
|
||||
const uint8_t imgPositionEmpty[] PROGMEM = {0x20, 0x30, 0x28, 0x24, 0x42, 0xFF};
|
||||
const uint8_t imgPositionSolid[] PROGMEM = {0x20, 0x30, 0x38, 0x3C, 0x7E, 0xFF};
|
||||
|
||||
#if defined(USE_EINK) || defined(ILI9341_DRIVER) || defined(ST7735_CS)
|
||||
#if defined(USE_EINK) || defined(ILI9341_DRIVER) || defined(ST7735_CS) || defined(ST7789_CS)
|
||||
const uint8_t imgQuestionL1[] PROGMEM = {0xff, 0x01, 0x01, 0x32, 0x7b, 0x49, 0x49, 0x6f, 0x26, 0x01, 0x01, 0xff};
|
||||
const uint8_t imgQuestionL2[] PROGMEM = {0x0f, 0x08, 0x08, 0x08, 0x06, 0x0f, 0x0f, 0x06, 0x08, 0x08, 0x08, 0x0f};
|
||||
const uint8_t imgInfoL1[] PROGMEM = {0xff, 0x01, 0x01, 0x01, 0x1e, 0x7f, 0x1e, 0x01, 0x01, 0x01, 0x01, 0xff};
|
||||
|
||||
@ -528,7 +528,7 @@ void setup()
|
||||
|
||||
// Don't call screen setup until after nodedb is setup (because we need
|
||||
// the current region name)
|
||||
#if defined(ST7735_CS) || defined(USE_EINK) || defined(ILI9341_DRIVER)
|
||||
#if defined(ST7735_CS) || defined(USE_EINK) || defined(ILI9341_DRIVER) || defined(ST7789_CS)
|
||||
screen->setup();
|
||||
#else
|
||||
if (screen_found.port != ScanI2C::I2CPort::NO_I2C)
|
||||
|
||||
@ -184,7 +184,7 @@ void NodeDB::installDefaultConfig()
|
||||
// FIXME: Default to bluetooth capability of platform as default
|
||||
config.bluetooth.enabled = true;
|
||||
config.bluetooth.fixed_pin = defaultBLEPin;
|
||||
#if defined(ST7735_CS) || defined(USE_EINK) || defined(ILI9341_DRIVER)
|
||||
#if defined(ST7735_CS) || defined(USE_EINK) || defined(ILI9341_DRIVER) || defined(ST7789_CS)
|
||||
bool hasScreen = true;
|
||||
#else
|
||||
bool hasScreen = screen_found.port != ScanI2C::I2CPort::NO_I2C;
|
||||
|
||||
@ -18,7 +18,7 @@
|
||||
#include "graphics/fonts/OLEDDisplayFontsUA.h"
|
||||
#endif
|
||||
|
||||
#if defined(USE_EINK) || defined(ILI9341_DRIVER) || defined(ST7735_CS)
|
||||
#if defined(USE_EINK) || defined(ILI9341_DRIVER) || defined(ST7735_CS) || defined(ST7789_CS)
|
||||
// The screen is bigger so use bigger fonts
|
||||
#define FONT_SMALL ArialMT_Plain_16
|
||||
#define FONT_MEDIUM ArialMT_Plain_24
|
||||
|
||||
@ -81,6 +81,8 @@
|
||||
#define HW_VENDOR meshtastic_HardwareModel_TLORA_V2_1_1P6
|
||||
#elif defined(TLORA_V2_1_18)
|
||||
#define HW_VENDOR meshtastic_HardwareModel_TLORA_V2_1_1P8
|
||||
#elif defined(T_DECK)
|
||||
#define HW_VENDOR meshtastic_HardwareModel_T_DECK
|
||||
#elif defined(GENIEBLOCKS)
|
||||
#define HW_VENDOR meshtastic_HardwareModel_GENIEBLOCKS
|
||||
#elif defined(PRIVATE_HW)
|
||||
|
||||
69
variants/t-deck/pins_arduino.h
Normal file
69
variants/t-deck/pins_arduino.h
Normal file
@ -0,0 +1,69 @@
|
||||
#ifndef Pins_Arduino_h
|
||||
#define Pins_Arduino_h
|
||||
|
||||
#include <stdint.h>
|
||||
|
||||
#define USB_VID 0x303a
|
||||
#define USB_PID 0x1001
|
||||
|
||||
#define EXTERNAL_NUM_INTERRUPTS 46
|
||||
#define NUM_DIGITAL_PINS 48
|
||||
#define NUM_ANALOG_INPUTS 20
|
||||
|
||||
#define analogInputToDigitalPin(p) (((p) < NUM_ANALOG_INPUTS) ? (analogChannelToDigitalPin(p)) : -1)
|
||||
#define digitalPinToInterrupt(p) (((p) < NUM_DIGITAL_PINS) ? (p) : -1)
|
||||
#define digitalPinHasPWM(p) (p < EXTERNAL_NUM_INTERRUPTS)
|
||||
|
||||
// static const uint8_t LED_BUILTIN = -1;
|
||||
|
||||
static const uint8_t TX = 43;
|
||||
static const uint8_t RX = 44;
|
||||
|
||||
static const uint8_t SDA = 18;
|
||||
static const uint8_t SCL = 8;
|
||||
|
||||
// Default SPI will be mapped to Radio
|
||||
static const uint8_t SS = 9;
|
||||
static const uint8_t MOSI = 41;
|
||||
static const uint8_t MISO = 38;
|
||||
static const uint8_t SCK = 40;
|
||||
|
||||
static const uint8_t A0 = 1;
|
||||
static const uint8_t A1 = 2;
|
||||
static const uint8_t A2 = 3;
|
||||
static const uint8_t A3 = 4;
|
||||
static const uint8_t A4 = 5;
|
||||
static const uint8_t A5 = 6;
|
||||
static const uint8_t A6 = 7;
|
||||
static const uint8_t A7 = 8;
|
||||
static const uint8_t A8 = 9;
|
||||
static const uint8_t A9 = 10;
|
||||
static const uint8_t A10 = 11;
|
||||
static const uint8_t A11 = 12;
|
||||
static const uint8_t A12 = 13;
|
||||
static const uint8_t A13 = 14;
|
||||
static const uint8_t A14 = 15;
|
||||
static const uint8_t A15 = 16;
|
||||
static const uint8_t A16 = 17;
|
||||
static const uint8_t A17 = 18;
|
||||
static const uint8_t A18 = 19;
|
||||
static const uint8_t A19 = 20;
|
||||
|
||||
static const uint8_t T1 = 1;
|
||||
static const uint8_t T2 = 2;
|
||||
static const uint8_t T3 = 3;
|
||||
static const uint8_t T4 = 4;
|
||||
static const uint8_t T5 = 5;
|
||||
static const uint8_t T6 = 6;
|
||||
static const uint8_t T7 = 7;
|
||||
static const uint8_t T8 = 8;
|
||||
static const uint8_t T9 = 9;
|
||||
static const uint8_t T10 = 10;
|
||||
static const uint8_t T11 = 11;
|
||||
static const uint8_t T12 = 12;
|
||||
static const uint8_t T13 = 13;
|
||||
static const uint8_t T14 = 14;
|
||||
|
||||
static const uint8_t BAT_ADC_PIN = 4;
|
||||
|
||||
#endif /* Pins_Arduino_h */
|
||||
14
variants/t-deck/platformio.ini
Normal file
14
variants/t-deck/platformio.ini
Normal file
@ -0,0 +1,14 @@
|
||||
; LilyGo T-Deck
|
||||
[env:t-deck]
|
||||
extends = esp32s3_base
|
||||
board = t-deck
|
||||
upload_protocol = esp-builtin
|
||||
debug_tool = esp-builtin
|
||||
|
||||
build_flags = ${esp32_base.build_flags}
|
||||
-DT_DECK
|
||||
-DBOARD_HAS_PSRAM
|
||||
-Ivariants/t-deck
|
||||
|
||||
lib_deps = ${esp32s3_base.lib_deps}
|
||||
lovyan03/LovyanGFX@^1.1.7
|
||||
74
variants/t-deck/variant.h
Normal file
74
variants/t-deck/variant.h
Normal file
@ -0,0 +1,74 @@
|
||||
// ST7789 TFT LCD
|
||||
#define ST7789_CS 12
|
||||
#define ST7789_RS 11 // DC
|
||||
#define ST7789_SDA 41 // MOSI
|
||||
#define ST7789_SCK 40
|
||||
#define ST7789_RESET -1
|
||||
#define ST7789_MISO 38
|
||||
#define ST7789_BUSY -1
|
||||
#define ST7789_BL 42
|
||||
#define ST7789_SPI_HOST SPI2_HOST
|
||||
#define ST7789_BACKLIGHT_EN 42
|
||||
#define SPI_FREQUENCY 40000000
|
||||
#define SPI_READ_FREQUENCY 16000000
|
||||
#define TFT_HEIGHT 320
|
||||
#define TFT_WIDTH 240
|
||||
#define TFT_OFFSET_X 0
|
||||
#define TFT_OFFSET_Y 0
|
||||
#define SCREEN_ROTATE
|
||||
#define SCREEN_TRANSITION_FRAMERATE 1 // fps
|
||||
#define SCREEN_TOUCH_INT 16
|
||||
#define TOUCH_SLAVE_ADDRESS 0x5D // GT911
|
||||
|
||||
#define BUTTON_PIN 0
|
||||
// #define BUTTON_NEED_PULLUP
|
||||
|
||||
#define HAS_GPS 0
|
||||
#undef GPS_RX_PIN
|
||||
#undef GPS_TX_PIN
|
||||
|
||||
// Have SPI interface SD card slot
|
||||
#define HAS_SDCARD 1
|
||||
#define SPI_MOSI (41)
|
||||
#define SPI_SCK (40)
|
||||
#define SPI_MISO (38)
|
||||
#define SPI_CS (39)
|
||||
#define SDCARD_CS SPI_CS
|
||||
|
||||
#define BATTERY_PIN 4 // A battery voltage measurement pin, voltage divider connected here to measure battery voltage
|
||||
// ratio of voltage divider = 2.0 (RD2=100k, RD3=100k)
|
||||
#define ADC_MULTIPLIER 2.11 // 2.0 + 10% for correction of display undervoltage.
|
||||
#define ADC_CHANNEL ADC1_GPIO1_CHANNEL
|
||||
|
||||
// keyboard
|
||||
#define I2C_SDA 18 // I2C pins for this board
|
||||
#define I2C_SCL 8
|
||||
#define BOARD_POWERON 10 // must be set to HIGH
|
||||
#define KB_SLAVE_ADDRESS 0x55
|
||||
#define KB_BL_PIN 46 // INT, set to INPUT
|
||||
#define KB_UP 2
|
||||
#define KB_DOWN 3
|
||||
#define KB_LEFT 1
|
||||
#define KB_RIGHT 15
|
||||
|
||||
#define USE_SX1262
|
||||
#define USE_SX1268
|
||||
|
||||
#define RF95_SCK 40
|
||||
#define RF95_MISO 38
|
||||
#define RF95_MOSI 41
|
||||
#define RF95_NSS 9
|
||||
|
||||
#define LORA_DIO0 -1 // a No connect on the SX1262 module
|
||||
#define LORA_RESET 17
|
||||
#define LORA_DIO1 45 // SX1262 IRQ
|
||||
#define LORA_DIO2 13 // SX1262 BUSY
|
||||
#define LORA_DIO3 // Not connected on PCB, but internally on the TTGO SX1262, if DIO3 is high the TXCO is enabled
|
||||
|
||||
#define SX126X_CS RF95_NSS // FIXME - we really should define LORA_CS instead
|
||||
#define SX126X_DIO1 LORA_DIO1
|
||||
#define SX126X_BUSY LORA_DIO2
|
||||
#define SX126X_RESET LORA_RESET
|
||||
#define SX126X_E22 // Not really an E22 but TTGO seems to be trying to clone that
|
||||
// Internally the TTGO module hooks the SX1262-DIO2 in to control the TX/RX switch (which is the default for the sx1262interface
|
||||
// code)
|
||||
Loading…
Reference in New Issue
Block a user