pohui_pohui/firmware
1
0
Fork 0
mirror of https://github.com/meshtastic/firmware.git synced 2025-04-26 18:09:04 +00:00
Code Issues Actions 5 Packages Projects Releases Wiki Activity

Merge branch 'master' into gps-fixedposboot

Browse Source
This commit is contained in:
Thomas Göttgens 2023-01-23 11:16:19 +01:00 committed by GitHub
commit 255d433ebf
No known key found for this signature in database
GPG Key ID: 4AEE18F83AFDEB23
2 changed files with 31 additions and 2 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

6
src/mesh/SX126xInterface.cpp
View File

@ -68,6 +68,12 @@ template <typename T> bool SX126xInterface<T>::init()
#if defined(SX126X_TXEN) && (SX126X_TXEN != RADIOLIB_NC)
// lora.begin sets Dio2 as RF switch control, which is not true if we are manually controlling RX and TX
if (res == RADIOLIB_ERR_NONE)
res = lora.setDio2AsRfSwitch(false);
#endif
#ifdef SX126X_E22
// E22 Emulation explicitly requires DIO2 as RF switch, so set it to TRUE again for good measure. In case somebody defines
// SX126X_TX for an E22 Module
if (res == RADIOLIB_ERR_NONE)
res = lora.setDio2AsRfSwitch(true);
#endif

27
variants/rak4631/variant.h
View File

@ -176,13 +176,36 @@ static const uint8_t SCK = PIN_SPI_SCK;
*/
// RAK4630 LoRa module
/* Setup of the SX1262 LoRa module ( https://docs.rakwireless.com/Product-Categories/WisBlock/RAK4631/Datasheet/ )
P1.10 NSS SPI NSS (Arduino GPIO number 42)
P1.11 SCK SPI CLK (Arduino GPIO number 43)
P1.12 MOSI SPI MOSI (Arduino GPIO number 44)
P1.13 MISO SPI MISO (Arduino GPIO number 45)
P1.14 BUSY BUSY signal (Arduino GPIO number 46)
P1.15 DIO1 DIO1 event interrupt (Arduino GPIO number 47)
P1.06 NRESET NRESET manual reset of the SX1262 (Arduino GPIO number 38)
Important for successful SX1262 initialization:
* Setup DIO2 to control the antenna switch
* Setup DIO3 to control the TCXO power supply
* Setup the SX1262 to use it's DCDC regulator and not the LDO
* RAK4630 schematics show GPIO P1.07 connected to the antenna switch, but it should not be initialized, as DIO2 will do the
control of the antenna switch
SO GPIO 39/TXEN MAY NOT BE DEFINED FOR SUCCESSFUL OPERATION OF THE SX1262 - TG
*/
#define USE_SX1262
#define SX126X_CS (42)
#define SX126X_DIO1 (47)
#define SX126X_BUSY (46)
#define SX126X_RESET (38)
#define SX126X_TXEN (39)
#define SX126X_RXEN (37)
// #define SX126X_TXEN (39)
// #define SX126X_RXEN (37)
#define SX126X_E22 // DIO2 controlls an antenna switch and the TCXO voltage is controlled by DIO3
// enables 3.3V periphery like GPS or IO Module