Merge branch 'develop' into t-watch-ultra

.trunk/trunk.yaml

@@ -17,7 +17,7 @@ lint:
     - trivy@0.67.0
     - taplo@0.10.0
     - ruff@0.13.2
-    - isort@6.0.1
+    - isort@6.1.0
     - markdownlint@0.45.0
     - oxipng@9.1.5
     - svgo@4.0.0

boards/heltec_wireless_tracker_v2.json

@@ -0,0 +1,37 @@
+{
+  "build": {
+    "arduino": {
+      "ldscript": "esp32s3_out.ld",
+      "partitions": "default_8MB.csv"
+    },
+    "core": "esp32",
+    "extra_flags": [
+      "-DARDUINO_USB_CDC_ON_BOOT=1",
+      "-DARDUINO_USB_MODE=0",
+      "-DARDUINO_RUNNING_CORE=1",
+      "-DARDUINO_EVENT_RUNNING_CORE=1"
+    ],
+    "f_cpu": "240000000L",
+    "f_flash": "80000000L",
+    "flash_mode": "qio",
+    "hwids": [["0x303A", "0x1001"]],
+    "mcu": "esp32s3",
+    "variant": "heltec_wireless_tracker_v2"
+  },
+  "connectivity": ["wifi", "bluetooth", "lora"],
+  "debug": {
+    "openocd_target": "esp32s3.cfg"
+  },
+  "frameworks": ["arduino", "espidf"],
+  "name": "Heltec Wireless Tracker V2",
+  "upload": {
+    "flash_size": "8MB",
+    "maximum_ram_size": 327680,
+    "maximum_size": 8388608,
+    "wait_for_upload_port": true,
+    "require_upload_port": true,
+    "speed": 921600
+  },
+  "url": "https://heltec.org",
+  "vendor": "Heltec"
+}

protobufs

@@ -1 +1 @@
-Subproject commit 60c3e6600a2f4e6f49e45aeb47aafd8291a0015c
+Subproject commit c1e31a9655e9920a8b5b8eccdf7c69ef1ae42a49

src/configuration.h

@@ -117,7 +117,7 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define SX126X_MAX_POWER 22
 #endif
 
-#ifdef HELTEC_V4
+#ifdef USE_GC1109_PA
 // Power Amps are often non-linear, so we can use an array of values for the power curve
 #define NUM_PA_POINTS 22
 #define TX_GAIN_LORA 11, 11, 11, 11, 11, 11, 11, 11, 11, 11, 11, 11, 11, 11, 11, 11, 10, 10, 9, 9, 8, 7

src/graphics/Screen.cpp

@@ -453,7 +453,7 @@ void Screen::handleSetOn(bool on, FrameCallback einkScreensaver)
 #endif
 
             dispdev->displayOn();
-#ifdef HELTEC_TRACKER_V1_X
+#if defined(HELTEC_TRACKER_V1_X) || defined(HELTEC_WIRELESS_TRACKER_V2)
             ui->init();
 #endif
 #ifdef USE_ST7789

src/graphics/draw/MenuHandler.cpp

@@ -116,6 +116,8 @@ void menuHandler::LoraRegionPicker(uint32_t duration)
     bannerOptions.bannerCallback = [](int selected) -> void {
         if (selected != 0 && config.lora.region != _meshtastic_Config_LoRaConfig_RegionCode(selected)) {
             config.lora.region = _meshtastic_Config_LoRaConfig_RegionCode(selected);
+            auto changes = SEGMENT_CONFIG;
+
             // This is needed as we wait til picking the LoRa region to generate keys for the first time.
             if (!owner.is_licensed) {
                 bool keygenSuccess = false;
@@ -124,6 +126,7 @@ void menuHandler::LoraRegionPicker(uint32_t duration)
                     if (crypto->regeneratePublicKey(config.security.public_key.bytes, config.security.private_key.bytes)) {
                         keygenSuccess = true;
                     }
+
                 } else {
                     LOG_INFO("Generate new PKI keys");
                     crypto->generateKeyPair(config.security.public_key.bytes, config.security.private_key.bytes);
@@ -141,7 +144,14 @@ void menuHandler::LoraRegionPicker(uint32_t duration)
             if (myRegion->dutyCycle < 100) {
                 config.lora.ignore_mqtt = true; // Ignore MQTT by default if region has a duty cycle limit
             }
-            service->reloadConfig(SEGMENT_CONFIG);
+
+            if (strncmp(moduleConfig.mqtt.root, default_mqtt_root, strlen(default_mqtt_root)) == 0) {
+                //  Default broker is in use, so subscribe to the appropriate MQTT root topic for this region
+                sprintf(moduleConfig.mqtt.root, "%s/%s", default_mqtt_root, myRegion->name);
+                changes |= SEGMENT_MODULECONFIG;
+            }
+
+            service->reloadConfig(changes);
             rebootAtMsec = (millis() + DEFAULT_REBOOT_SECONDS * 1000);
         }
     };

src/mesh/NodeDB.cpp

@@ -56,6 +56,10 @@
 #include <WiFiOTA.h>
 #endif
 
+// stringify
+#define xstr(s) str(s)
+#define str(s) #s
+
 NodeDB *nodeDB = nullptr;
 
 // we have plenty of ram so statically alloc this tempbuf (for now)
@@ -1152,6 +1156,20 @@ void NodeDB::loadFromDisk()
     spiLock->unlock();
 #endif
 #ifdef FSCom
+#ifdef FACTORY_INSTALL
+    spiLock->lock();
+    if (!FSCom.exists("/prefs/" xstr(BUILD_EPOCH))) {
+        LOG_WARN("Factory Install Reset!");
+        FSCom.format();
+        FSCom.mkdir("/prefs");
+        File f2 = FSCom.open("/prefs/" xstr(BUILD_EPOCH), FILE_O_WRITE);
+        if (f2) {
+            f2.flush();
+            f2.close();
+        }
+    }
+    spiLock->unlock();
+#endif
     spiLock->lock();
     if (FSCom.exists(legacyPrefFileName)) {
         spiLock->unlock();

src/mesh/SX126xInterface.cpp

@@ -52,7 +52,7 @@ template <typename T> bool SX126xInterface<T>::init()
     pinMode(SX126X_POWER_EN, OUTPUT);
 #endif
 
-#ifdef HELTEC_V4
+#if defined(USE_GC1109_PA)
     pinMode(LORA_PA_POWER, OUTPUT);
     digitalWrite(LORA_PA_POWER, HIGH);
 
@@ -352,7 +352,7 @@ template <typename T> bool SX126xInterface<T>::sleep()
     digitalWrite(SX126X_POWER_EN, LOW);
 #endif
 
-#ifdef HELTEC_V4
+#if defined(USE_GC1109_PA)
     /*
      * Do not switch the power on and off frequently.
      * After turning off LORA_PA_EN, the power consumption has dropped to the uA level.
@@ -367,7 +367,7 @@ template <typename T> bool SX126xInterface<T>::sleep()
 /** Some boards require GPIO control of tx vs rx paths */
 template <typename T> void SX126xInterface<T>::setTransmitEnable(bool txon)
 {
-#ifdef HELTEC_V4
+#if defined(USE_GC1109_PA)
     digitalWrite(LORA_PA_POWER, HIGH);
     digitalWrite(LORA_PA_EN, HIGH);
     digitalWrite(LORA_PA_TX_EN, txon ? 1 : 0);

src/mesh/generated/meshtastic/device_ui.pb.h

@@ -68,6 +68,8 @@ typedef enum _meshtastic_Language {
     meshtastic_Language_BULGARIAN = 17,
     /* Czech */
     meshtastic_Language_CZECH = 18,
+    /* Danish */
+    meshtastic_Language_DANISH = 19,
     /* Simplified Chinese (experimental) */
     meshtastic_Language_SIMPLIFIED_CHINESE = 30,
     /* Traditional Chinese (experimental) */

src/modules/AdminModule.cpp

@@ -784,11 +784,24 @@ void AdminModule::handleSetConfig(const meshtastic_Config &c)
             if (myRegion->dutyCycle < 100) {
                 config.lora.ignore_mqtt = true; // Ignore MQTT by default if region has a duty cycle limit
             }
+            //  Compare the entire string, we are sure of the length as a topic has never been set
             if (strcmp(moduleConfig.mqtt.root, default_mqtt_root) == 0) {
                 sprintf(moduleConfig.mqtt.root, "%s/%s", default_mqtt_root, myRegion->name);
                 changes = SEGMENT_CONFIG | SEGMENT_MODULECONFIG;
             }
         }
+        if (config.lora.region != myRegion->code) {
+            //  Region has changed so check whether there is a regulatory one we should be using instead.
+            //  Additionally as a side-effect, assume a new value under myRegion
+            initRegion();
+
+            if (strncmp(moduleConfig.mqtt.root, default_mqtt_root, strlen(default_mqtt_root)) == 0) {
+                //  Default root is in use, so subscribe to the appropriate MQTT topic for this region
+                sprintf(moduleConfig.mqtt.root, "%s/%s", default_mqtt_root, myRegion->name);
+            }
+
+            changes = SEGMENT_CONFIG | SEGMENT_MODULECONFIG;
+        }
         break;
     }
     case meshtastic_Config_bluetooth_tag:

src/platform/esp32/architecture.h

@@ -201,6 +201,8 @@
 #define HW_VENDOR meshtastic_HardwareModel_HELTEC_V4
 #elif defined(M5STACK_UNITC6L)
 #define HW_VENDOR meshtastic_HardwareModel_M5STACK_C6L
+#elif defined(HELTEC_WIRELESS_TRACKER_V2)
+#define HW_VENDOR meshtastic_HardwareModel_HELTEC_WIRELESS_TRACKER_V2
 #elif defined(T_WATCH_ULTRA)
 #define HW_VENDOR meshtastic_HardwareModel_T_WATCH_ULTRA
 #endif

src/platform/nrf52/architecture.h

@@ -55,6 +55,8 @@
 #define HW_VENDOR meshtastic_HardwareModel_GAT562_MESH_TRIAL_TRACKER
 #elif defined(NOMADSTAR_METEOR_PRO)
 #define HW_VENDOR meshtastic_HardwareModel_NOMADSTAR_METEOR_PRO
+#elif defined(R1_NEO)
+#define HW_VENDOR meshtastic_HardwareModel_MUZI_R1_NEO
 // MAke sure all custom RAK4630 boards are defined before the generic RAK4630
 #elif defined(RAK4630)
 #define HW_VENDOR meshtastic_HardwareModel_RAK4631
@@ -98,8 +100,6 @@
 #define HW_VENDOR meshtastic_HardwareModel_SEEED_WIO_TRACKER_L1_EINK
 #elif defined(SEEED_WIO_TRACKER_L1)
 #define HW_VENDOR meshtastic_HardwareModel_SEEED_WIO_TRACKER_L1
-#elif defined(R1_NEO)
-#define HW_VENDOR meshtastic_HardwareModel_MUZI_R1_NEO
 #elif defined(HELTEC_MESH_SOLAR)
 #define HW_VENDOR meshtastic_HardwareModel_HELTEC_MESH_SOLAR
 #else

src/sleep.cpp

@@ -553,7 +553,7 @@ void enableLoraInterrupt()
     gpio_pullup_en((gpio_num_t)LORA_CS);
 #endif
 
-#ifdef HELTEC_V4
+#if defined(USE_GC1109_PA)
     gpio_pullup_en((gpio_num_t)LORA_PA_POWER);
     gpio_pullup_en((gpio_num_t)LORA_PA_EN);
     gpio_pulldown_en((gpio_num_t)LORA_PA_TX_EN);

variants/esp32s3/heltec_v4/variant.h

@@ -37,6 +37,7 @@
 #define SX126X_DIO2_AS_RF_SWITCH
 #define SX126X_DIO3_TCXO_VOLTAGE 1.8
 
+#define USE_GC1109_PA   // We have a GC1109 power amplifier+attenuator
 #define LORA_PA_POWER 7 // power en
 #define LORA_PA_EN 2
 #define LORA_PA_TX_EN 46 // enable tx

variants/esp32s3/heltec_wireless_tracker_v2/pins_arduino.h

@@ -0,0 +1,71 @@
+#ifndef Pins_Arduino_h
+#define Pins_Arduino_h
+
+#include "soc/soc_caps.h"
+#include <stdint.h>
+
+#define DISPLAY_HEIGHT 80
+#define DISPLAY_WIDTH 160
+
+#define USB_VID 0x303a
+#define USB_PID 0x1001
+
+static const uint8_t LED_BUILTIN = 18;
+#define BUILTIN_LED LED_BUILTIN // backward compatibility
+#define LED_BUILTIN LED_BUILTIN
+
+static const uint8_t TX = 43;
+static const uint8_t RX = 44;
+
+static const uint8_t SDA = 5;
+static const uint8_t SCL = 6;
+
+static const uint8_t SS = 8;
+static const uint8_t MOSI = 10;
+static const uint8_t MISO = 11;
+static const uint8_t SCK = 9;
+
+static const uint8_t A0 = 1;
+static const uint8_t A1 = 2;
+static const uint8_t A2 = 3;
+static const uint8_t A3 = 4;
+static const uint8_t A4 = 5;
+static const uint8_t A5 = 6;
+static const uint8_t A6 = 7;
+static const uint8_t A7 = 8;
+static const uint8_t A8 = 9;
+static const uint8_t A9 = 10;
+static const uint8_t A10 = 11;
+static const uint8_t A11 = 12;
+static const uint8_t A12 = 13;
+static const uint8_t A13 = 14;
+static const uint8_t A14 = 15;
+static const uint8_t A15 = 16;
+static const uint8_t A16 = 17;
+static const uint8_t A17 = 18;
+static const uint8_t A18 = 19;
+static const uint8_t A19 = 20;
+
+static const uint8_t T1 = 1;
+static const uint8_t T2 = 2;
+static const uint8_t T3 = 3;
+static const uint8_t T4 = 4;
+static const uint8_t T5 = 5;
+static const uint8_t T6 = 6;
+static const uint8_t T7 = 7;
+static const uint8_t T8 = 8;
+static const uint8_t T9 = 9;
+static const uint8_t T10 = 10;
+static const uint8_t T11 = 11;
+static const uint8_t T12 = 12;
+static const uint8_t T13 = 13;
+static const uint8_t T14 = 14;
+
+static const uint8_t Vext = 3;
+static const uint8_t LED = 18;
+
+static const uint8_t RST_LoRa = 12;
+static const uint8_t BUSY_LoRa = 13;
+static const uint8_t DIO0 = 14;
+
+#endif /* Pins_Arduino_h */

variants/esp32s3/heltec_wireless_tracker_v2/platformio.ini

@@ -0,0 +1,14 @@
+[env:heltec-wireless-tracker-v2]
+extends = esp32s3_base
+board = heltec_wireless_tracker_v2
+board_build.partitions = default_8MB.csv
+upload_protocol = esptool
+
+build_flags = 
+  ${esp32s3_base.build_flags}
+  -I variants/esp32s3/heltec_wireless_tracker_v2
+  -D HELTEC_WIRELESS_TRACKER_V2
+  -D GPS_POWER_TOGGLE ; comment this line to disable triple press function on the user button to turn off gps entirely.
+lib_deps =
+  ${esp32s3_base.lib_deps}
+  lovyan03/LovyanGFX@^1.2.0

variants/esp32s3/heltec_wireless_tracker_v2/variant.h

@@ -0,0 +1,78 @@
+#define LED_PIN 18
+
+#define _VARIANT_HELTEC_WIRELESS_TRACKER
+
+// I2C
+#define I2C_SDA SDA
+#define I2C_SCL SCL
+
+// ST7735S TFT LCD
+#define ST7735S 1 // there are different (sub-)versions of ST7735
+#define ST7735_CS 38
+#define ST7735_RS 40  // DC
+#define ST7735_SDA 42 // MOSI
+#define ST7735_SCK 41
+#define ST7735_RESET 39
+#define ST7735_MISO -1
+#define ST7735_BUSY -1
+#define TFT_BL 21
+#define ST7735_SPI_HOST SPI3_HOST
+#define SPI_FREQUENCY 40000000
+#define SPI_READ_FREQUENCY 16000000
+#define SCREEN_ROTATE
+#define TFT_HEIGHT DISPLAY_WIDTH
+#define TFT_WIDTH DISPLAY_HEIGHT
+#define TFT_OFFSET_X 24
+#define TFT_OFFSET_Y 0
+#define TFT_INVERT false
+#define SCREEN_TRANSITION_FRAMERATE 3 // fps
+#define DISPLAY_FORCE_SMALL_FONTS
+
+#define VEXT_ENABLE 3 // active HIGH - powers the GPS, GPS LNA and OLED
+#define VEXT_ON_VALUE HIGH
+#define BUTTON_PIN 0
+
+#define BATTERY_PIN 1 // A battery voltage measurement pin, voltage divider connected here to measure battery voltage
+#define ADC_CHANNEL ADC1_GPIO1_CHANNEL
+#define ADC_ATTENUATION ADC_ATTEN_DB_2_5 // lower dB for high resistance voltage divider
+#define ADC_MULTIPLIER 4.9 * 1.045
+#define ADC_CTRL 2     // active HIGH, powers the voltage divider.
+#define ADC_USE_PULLUP // Use internal pullup/pulldown instead of actively driving the output
+
+#undef GPS_RX_PIN
+#undef GPS_TX_PIN
+#define GPS_RX_PIN 33
+#define GPS_TX_PIN 34
+#define PIN_GPS_RESET 35
+#define PIN_GPS_PPS 36
+// #define PIN_GPS_EN 3    // Uncomment to power off the GPS with triple-click on Tracker v2, though we'll also lose the
+// display.
+
+#define GPS_RESET_MODE LOW
+#define GPS_UC6580
+#define GPS_BAUDRATE 115200
+
+#define USE_SX1262
+#define LORA_DIO0 -1 // a No connect on the SX1262 module
+#define LORA_RESET 12
+#define LORA_DIO1 14 // SX1262 IRQ
+#define LORA_DIO2 13 // SX1262 BUSY
+#define LORA_DIO3    // Not connected on PCB, but internally on the TTGO SX1262, if DIO3 is high the TCXO is enabled
+
+#define LORA_SCK 9
+#define LORA_MISO 11
+#define LORA_MOSI 10
+#define LORA_CS 8
+
+#define SX126X_CS LORA_CS
+#define SX126X_DIO1 LORA_DIO1
+#define SX126X_BUSY LORA_DIO2
+#define SX126X_RESET LORA_RESET
+
+#define SX126X_DIO2_AS_RF_SWITCH
+#define SX126X_DIO3_TCXO_VOLTAGE 1.8
+
+#define USE_GC1109_PA   // We have a GC1109 power amplifier+attenuator
+#define LORA_PA_POWER 7 // power en
+#define LORA_PA_EN 4
+#define LORA_PA_TX_EN 46 // enable tx