Merge branch 'master' into RGBLED

protobufs

@@ -1 +1 @@
-Subproject commit ecf105f66d182531423b73f4408c53701313c4eb
+Subproject commit 0d08acd9c51c4e5575f3ea42368834ec990b2278

src/mesh/Router.cpp

@@ -465,21 +465,22 @@ void Router::handleReceived(meshtastic_MeshPacket *p, RxSource src)
             cancelSending(p->from, p->id);
             skipHandle = true;
         }
-#if !MESHTASTIC_EXCLUDE_MQTT
-        // Publish received message to MQTT if we're not the original transmitter of the packet
-        if (!skipHandle && moduleConfig.mqtt.enabled && getFrom(p) != nodeDB->getNodeNum() && mqtt)
-            mqtt->onSend(*p_encrypted, *p, p->channel);
-#endif
-
     } else {
         printPacket("packet decoding failed or skipped (no PSK?)", p);
     }
 
-    packetPool.release(p_encrypted); // Release the encrypted packet
-
     // call modules here
-    if (!skipHandle)
+    if (!skipHandle) {
         MeshModule::callModules(*p, src);
+
+#if !MESHTASTIC_EXCLUDE_MQTT
+        // After potentially altering it, publish received message to MQTT if we're not the original transmitter of the packet
+        if (decoded && moduleConfig.mqtt.enabled && getFrom(p) != nodeDB->getNodeNum() && mqtt)
+            mqtt->onSend(*p_encrypted, *p, p->channel);
+#endif
+    }
+
+    packetPool.release(p_encrypted); // Release the encrypted packet
 }
 
 void Router::perhapsHandleReceived(meshtastic_MeshPacket *p)

src/mesh/generated/meshtastic/config.pb.h

@@ -324,35 +324,30 @@ typedef struct _meshtastic_Config_PositionConfig {
 /* Power Config\
  See [Power Config](/docs/settings/config/power) for additional power config details. */
 typedef struct _meshtastic_Config_PowerConfig {
-    /* If set, we are powered from a low-current source (i.e. solar), so even if it looks like we have power flowing in
- we should try to minimize power consumption as much as possible.
- YOU DO NOT NEED TO SET THIS IF YOU'VE set is_router (it is implied in that case).
- Advanced Option */
+    /* Description: Will sleep everything as much as possible, for the tracker and sensor role this will also include the lora radio. 
+ Don't use this setting if you want to use your device with the phone apps or are using a device without a user button.
+ Technical Details: Works for ESP32 devices and NRF52 devices in the Sensor or Tracker roles */
     bool is_power_saving;
-    /* If non-zero, the device will fully power off this many seconds after external power is removed. */
+    /* Description: If non-zero, the device will fully power off this many seconds after external power is removed. */
     uint32_t on_battery_shutdown_after_secs;
     /* Ratio of voltage divider for battery pin eg. 3.20 (R1=100k, R2=220k)
  Overrides the ADC_MULTIPLIER defined in variant for battery voltage calculation.
- Should be set to floating point value between 2 and 4
- Fixes issues on Heltec v2 */
+ https://meshtastic.org/docs/configuration/radio/power/#adc-multiplier-override
+ Should be set to floating point value between 2 and 6 */
     float adc_multiplier_override;
-    /* Wait Bluetooth Seconds
- The number of seconds for to wait before turning off BLE in No Bluetooth states
- 0 for default of 1 minute */
+    /* Description: The number of seconds for to wait before turning off BLE in No Bluetooth states
+  Technical Details: ESP32 Only 0 for default of 1 minute */
     uint32_t wait_bluetooth_secs;
     /* Super Deep Sleep Seconds
  While in Light Sleep if mesh_sds_timeout_secs is exceeded we will lower into super deep sleep
  for this value (default 1 year) or a button press
  0 for default of one year */
     uint32_t sds_secs;
-    /* Light Sleep Seconds
- In light sleep the CPU is suspended, LoRa radio is on, BLE is off an GPS is on
- ESP32 Only
- 0 for default of 300 */
+    /* Description: In light sleep the CPU is suspended, LoRa radio is on, BLE is off an GPS is on
+ Technical Details: ESP32 Only 0 for default of 300 */
     uint32_t ls_secs;
-    /* Minimum Wake Seconds
- While in light sleep when we receive packets on the LoRa radio we will wake and handle them and stay awake in no BLE mode for this value
- 0 for default of 10 seconds */
+    /* Description: While in light sleep when we receive packets on the LoRa radio we will wake and handle them and stay awake in no BLE mode for this value
+ Technical Details: ESP32 Only 0 for default of 10 seconds */
     uint32_t min_wake_secs;
     /* I2C address of INA_2XX to use for reading device battery voltage */
     uint8_t device_battery_ina_address;

version.properties

@@ -1,4 +1,4 @@
 [VERSION]  
 major = 2
 minor = 3
-build = 6
+build = 7