mirror of
https://github.com/meshtastic/firmware.git
synced 2025-06-08 14:12:05 +00:00
update some values in varient for rak wistap
This commit is contained in:
Justin E. Mann
parent
7873fb47f1
commit
34b56ef31a
@ -34,7 +34,8 @@
|
||||
#include "WVariant.h"
|
||||
|
||||
#ifdef __cplusplus
|
||||
extern "C" {
|
||||
extern "C"
|
||||
{
|
||||
#endif // __cplusplus
|
||||
|
||||
// Number of pins defined in PinDescription array
|
||||
@ -55,9 +56,9 @@ extern "C" {
|
||||
|
||||
#define LED_STATE_ON 1 // State when LED is litted
|
||||
|
||||
/*
|
||||
* Buttons
|
||||
*/
|
||||
/*
|
||||
* Buttons
|
||||
*/
|
||||
|
||||
#define PIN_BUTTON1 9 // Pin for button on E-ink button module or IO expansion such as the RAK14014 or RAK14015 TFT modules
|
||||
#define BUTTON_NEED_PULLUP
|
||||
@ -77,14 +78,14 @@ extern "C" {
|
||||
#define PIN_A6 (0xff)
|
||||
#define PIN_A7 (0xff)
|
||||
|
||||
static const uint8_t A0 = PIN_A0;
|
||||
static const uint8_t A1 = PIN_A1;
|
||||
static const uint8_t A2 = PIN_A2;
|
||||
static const uint8_t A3 = PIN_A3;
|
||||
static const uint8_t A4 = PIN_A4;
|
||||
static const uint8_t A5 = PIN_A5;
|
||||
static const uint8_t A6 = PIN_A6;
|
||||
static const uint8_t A7 = PIN_A7;
|
||||
static const uint8_t A0 = PIN_A0;
|
||||
static const uint8_t A1 = PIN_A1;
|
||||
static const uint8_t A2 = PIN_A2;
|
||||
static const uint8_t A3 = PIN_A3;
|
||||
static const uint8_t A4 = PIN_A4;
|
||||
static const uint8_t A5 = PIN_A5;
|
||||
static const uint8_t A6 = PIN_A6;
|
||||
static const uint8_t A7 = PIN_A7;
|
||||
#define ADC_RESOLUTION 14
|
||||
|
||||
// Other pins
|
||||
@ -94,7 +95,7 @@ static const uint8_t A7 = PIN_A7;
|
||||
#define WB_IO4 (4)
|
||||
#define PIN_NFC2 (10)
|
||||
|
||||
static const uint8_t AREF = PIN_AREF;
|
||||
static const uint8_t AREF = PIN_AREF;
|
||||
|
||||
/*
|
||||
* Serial interfaces
|
||||
@ -119,14 +120,14 @@ static const uint8_t AREF = PIN_AREF;
|
||||
#define PIN_SPI1_MOSI (30) // (0 + 30)
|
||||
#define PIN_SPI1_SCK (3) // (0 + 3)
|
||||
|
||||
static const uint8_t SS = 42;
|
||||
static const uint8_t MOSI = PIN_SPI_MOSI;
|
||||
static const uint8_t MISO = PIN_SPI_MISO;
|
||||
static const uint8_t SCK = PIN_SPI_SCK;
|
||||
static const uint8_t SS = 42;
|
||||
static const uint8_t MOSI = PIN_SPI_MOSI;
|
||||
static const uint8_t MISO = PIN_SPI_MISO;
|
||||
static const uint8_t SCK = PIN_SPI_SCK;
|
||||
|
||||
/*
|
||||
* eink display pins
|
||||
*/
|
||||
/*
|
||||
* eink display pins
|
||||
*/
|
||||
|
||||
#define PIN_EINK_CS (0 + 26)
|
||||
#define PIN_EINK_BUSY (0 + 4)
|
||||
@ -160,65 +161,65 @@ static const uint8_t SCK = PIN_SPI_SCK;
|
||||
#define EXTERNAL_FLASH_DEVICES IS25LP080D
|
||||
#define EXTERNAL_FLASH_USE_QSPI
|
||||
|
||||
/* @note RAK5005-O GPIO mapping to RAK4631 GPIO ports
|
||||
RAK5005-O <-> nRF52840
|
||||
IO1 <-> P0.17 (Arduino GPIO number 17)
|
||||
IO2 <-> P1.02 (Arduino GPIO number 34)
|
||||
IO3 <-> P0.21 (Arduino GPIO number 21)
|
||||
IO4 <-> P0.04 (Arduino GPIO number 4)
|
||||
IO5 <-> P0.09 (Arduino GPIO number 9)
|
||||
IO6 <-> P0.10 (Arduino GPIO number 10)
|
||||
IO7 <-> P0.28 (Arduino GPIO number 28)
|
||||
SW1 <-> P0.01 (Arduino GPIO number 1)
|
||||
A0 <-> P0.04/AIN2 (Arduino Analog A2
|
||||
A1 <-> P0.31/AIN7 (Arduino Analog A7
|
||||
SPI_CS <-> P0.26 (Arduino GPIO number 26)
|
||||
*/
|
||||
/* @note RAK5005-O GPIO mapping to RAK4631 GPIO ports
|
||||
RAK5005-O <-> nRF52840
|
||||
IO1 <-> P0.17 (Arduino GPIO number 17)
|
||||
IO2 <-> P1.02 (Arduino GPIO number 34)
|
||||
IO3 <-> P0.21 (Arduino GPIO number 21)
|
||||
IO4 <-> P0.04 (Arduino GPIO number 4)
|
||||
IO5 <-> P0.09 (Arduino GPIO number 9)
|
||||
IO6 <-> P0.10 (Arduino GPIO number 10)
|
||||
IO7 <-> P0.28 (Arduino GPIO number 28)
|
||||
SW1 <-> P0.01 (Arduino GPIO number 1)
|
||||
A0 <-> P0.04/AIN2 (Arduino Analog A2
|
||||
A1 <-> P0.31/AIN7 (Arduino Analog A7
|
||||
SPI_CS <-> P0.26 (Arduino GPIO number 26)
|
||||
*/
|
||||
|
||||
// No reason not to have the RAK Wireless pin defs here too. This allows code from example RAK sketches to run without
|
||||
// modification.
|
||||
// No reason not to have the RAK Wireless pin defs here too. This allows code from example RAK sketches to run without
|
||||
// modification.
|
||||
|
||||
static const uint8_t WB_IO1 = 17; // SLOT_A SLOT_B
|
||||
static const uint8_t WB_IO2 = 34; // SLOT_A SLOT_B
|
||||
static const uint8_t WB_IO3 = 21; // SLOT_C
|
||||
static const uint8_t WB_IO4 = 4; // SLOT_C
|
||||
static const uint8_t WB_IO5 = 9; // SLOT_D
|
||||
static const uint8_t WB_IO6 = 10; // SLOT_D
|
||||
static const uint8_t WB_SW1 = 33; // IO_SLOT
|
||||
static const uint8_t WB_A0 = 5; // IO_SLOT
|
||||
static const uint8_t WB_A1 = 31; // IO_SLOT
|
||||
static const uint8_t WB_I2C1_SDA = 13; // SENSOR_SLOT IO_SLOT
|
||||
static const uint8_t WB_I2C1_SCL = 14; // SENSOR_SLOT IO_SLOT
|
||||
static const uint8_t WB_I2C2_SDA = 24; // IO_SLOT
|
||||
static const uint8_t WB_I2C2_SCL = 25; // IO_SLOT
|
||||
static const uint8_t WB_SPI_CS = 26; // IO_SLOT
|
||||
static const uint8_t WB_SPI_CLK = 3; // IO_SLOT
|
||||
static const uint8_t WB_SPI_MISO = 29; // IO_SLOT
|
||||
static const uint8_t WB_SPI_MOSI = 30; // IO_SLOT
|
||||
static const uint8_t WB_IO1 = 17; // SLOT_A SLOT_B
|
||||
static const uint8_t WB_IO2 = 34; // SLOT_A SLOT_B
|
||||
static const uint8_t WB_IO3 = 21; // SLOT_C
|
||||
// static const uint8_t WB_IO4 = 4; // SLOT_C <- already defined above (ln. 94)
|
||||
// static const uint8_t WB_IO5 = 9; // SLOT_D <- already defined above (ln. 93)
|
||||
static const uint8_t WB_IO6 = 10; // SLOT_D
|
||||
static const uint8_t WB_SW1 = 33; // IO_SLOT
|
||||
static const uint8_t WB_A0 = 5; // IO_SLOT
|
||||
static const uint8_t WB_A1 = 31; // IO_SLOT
|
||||
static const uint8_t WB_I2C1_SDA = 13; // SENSOR_SLOT IO_SLOT
|
||||
static const uint8_t WB_I2C1_SCL = 14; // SENSOR_SLOT IO_SLOT
|
||||
static const uint8_t WB_I2C2_SDA = 24; // IO_SLOT
|
||||
static const uint8_t WB_I2C2_SCL = 25; // IO_SLOT
|
||||
static const uint8_t WB_SPI_CS = 26; // IO_SLOT
|
||||
static const uint8_t WB_SPI_CLK = 3; // IO_SLOT
|
||||
static const uint8_t WB_SPI_MISO = 29; // IO_SLOT
|
||||
static const uint8_t WB_SPI_MOSI = 30; // IO_SLOT
|
||||
|
||||
// RAK4630 LoRa module
|
||||
// RAK4630 LoRa module
|
||||
|
||||
/* Setup of the SX1262 LoRa module ( https://docs.rakwireless.com/Product-Categories/WisBlock/RAK4631/Datasheet/ )
|
||||
/* Setup of the SX1262 LoRa module ( https://docs.rakwireless.com/Product-Categories/WisBlock/RAK4631/Datasheet/ )
|
||||
|
||||
P1.10 NSS SPI NSS (Arduino GPIO number 42)
|
||||
P1.11 SCK SPI CLK (Arduino GPIO number 43)
|
||||
P1.12 MOSI SPI MOSI (Arduino GPIO number 44)
|
||||
P1.13 MISO SPI MISO (Arduino GPIO number 45)
|
||||
P1.14 BUSY BUSY signal (Arduino GPIO number 46)
|
||||
P1.15 DIO1 DIO1 event interrupt (Arduino GPIO number 47)
|
||||
P1.06 NRESET NRESET manual reset of the SX1262 (Arduino GPIO number 38)
|
||||
P1.10 NSS SPI NSS (Arduino GPIO number 42)
|
||||
P1.11 SCK SPI CLK (Arduino GPIO number 43)
|
||||
P1.12 MOSI SPI MOSI (Arduino GPIO number 44)
|
||||
P1.13 MISO SPI MISO (Arduino GPIO number 45)
|
||||
P1.14 BUSY BUSY signal (Arduino GPIO number 46)
|
||||
P1.15 DIO1 DIO1 event interrupt (Arduino GPIO number 47)
|
||||
P1.06 NRESET NRESET manual reset of the SX1262 (Arduino GPIO number 38)
|
||||
|
||||
Important for successful SX1262 initialization:
|
||||
Important for successful SX1262 initialization:
|
||||
|
||||
* Setup DIO2 to control the antenna switch
|
||||
* Setup DIO3 to control the TCXO power supply
|
||||
* Setup the SX1262 to use it's DCDC regulator and not the LDO
|
||||
* RAK4630 schematics show GPIO P1.07 connected to the antenna switch, but it should not be initialized, as DIO2 will do the
|
||||
control of the antenna switch
|
||||
* Setup DIO2 to control the antenna switch
|
||||
* Setup DIO3 to control the TCXO power supply
|
||||
* Setup the SX1262 to use it's DCDC regulator and not the LDO
|
||||
* RAK4630 schematics show GPIO P1.07 connected to the antenna switch, but it should not be initialized, as DIO2 will do the
|
||||
control of the antenna switch
|
||||
|
||||
SO GPIO 39/TXEN MAY NOT BE DEFINED FOR SUCCESSFUL OPERATION OF THE SX1262 - TG
|
||||
SO GPIO 39/TXEN MAY NOT BE DEFINED FOR SUCCESSFUL OPERATION OF THE SX1262 - TG
|
||||
|
||||
*/
|
||||
*/
|
||||
|
||||
#define USE_SX1262
|
||||
#define SX126X_CS (42)
|
||||
|
||||
Loading…
Reference in New Issue
Block a user