diff --git a/boards/gat562_mesh_tracker_pro.json b/boards/gat562_mesh_tracker_pro.json deleted file mode 100644 index 92e5feb89..000000000 --- a/boards/gat562_mesh_tracker_pro.json +++ /dev/null @@ -1,52 +0,0 @@ -{ - "build": { - "arduino": { - "ldscript": "nrf52840_s140_v6.ld" - }, - "core": "nRF5", - "cpu": "cortex-m4", - "extra_flags": "-DARDUINO_NRF52840_FEATHER -DNRF52840_XXAA", - "f_cpu": "64000000L", - "hwids": [ - ["0x239A", "0x8029"], - ["0x239A", "0x0029"], - ["0x239A", "0x002A"], - ["0x239A", "0x802A"] - ], - "usb_product": "GAT562 Mesh Tracker Pro", - "mcu": "nrf52840", - "variant": "gat562_mesh_tracker_pro", - "bsp": { - "name": "adafruit" - }, - "softdevice": { - "sd_flags": "-DS140", - "sd_name": "s140", - "sd_version": "6.1.1", - "sd_fwid": "0x00B6" - }, - "bootloader": { - "settings_addr": "0xFF000" - } - }, - "connectivity": ["bluetooth"], - "debug": { - "jlink_device": "nRF52840_xxAA", - "svd_path": "nrf52840.svd", - "openocd_target": "nrf52840-mdk-rs" - }, - "frameworks": ["arduino", "freertos"], - "name": "GAT562 Mesh Tracker Pro", - "upload": { - "maximum_ram_size": 248832, - "maximum_size": 815104, - "speed": 115200, - "protocol": "nrfutil", - "protocols": ["jlink", "nrfjprog", "nrfutil", "stlink"], - "use_1200bps_touch": true, - "require_upload_port": true, - "wait_for_upload_port": true - }, - "url": "http://www.gat-iot.com/", - "vendor": "GAT" -} diff --git a/variants/nrf52840/gat562_mesh_tracker_pro/platformio.ini b/variants/nrf52840/gat562_mesh_tracker_pro/platformio.ini deleted file mode 100644 index 8052d6336..000000000 --- a/variants/nrf52840/gat562_mesh_tracker_pro/platformio.ini +++ /dev/null @@ -1,15 +0,0 @@ -; GAT562 Mesh Tracker Pro with Trackball support -[env:gat562_mesh_tracker_pro] -extends = nrf52840_base -board = gat562_mesh_tracker_pro -board_check = true -build_flags = ${nrf52840_base.build_flags} - -I variants/nrf52840/gat562_mesh_tracker_pro - -D GAT562_MESH_TRACKER_PRO - -DGPS_POWER_TOGGLE ; comment this line to disable triple press function on the user button to turn off gps entirely. - -DRADIOLIB_EXCLUDE_SX128X=1 - -DRADIOLIB_EXCLUDE_SX127X=1 - -DRADIOLIB_EXCLUDE_LR11X0=1 -build_src_filter = ${nrf52_base.build_src_filter} +<../variants/nrf52840/gat562_mesh_tracker_pro> -lib_deps = - ${nrf52840_base.lib_deps} diff --git a/variants/nrf52840/gat562_mesh_tracker_pro/variant.cpp b/variants/nrf52840/gat562_mesh_tracker_pro/variant.cpp deleted file mode 100644 index 0b9a41025..000000000 --- a/variants/nrf52840/gat562_mesh_tracker_pro/variant.cpp +++ /dev/null @@ -1,54 +0,0 @@ -/* - Copyright (c) 2014-2015 Arduino LLC. All right reserved. - Copyright (c) 2016 Sandeep Mistry All right reserved. - Copyright (c) 2018, Adafruit Industries (adafruit.com) - - This library is free software; you can redistribute it and/or - modify it under the terms of the GNU Lesser General Public - License as published by the Free Software Foundation; either - version 2.1 of the License, or (at your option) any later version. - - This library is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. - See the GNU Lesser General Public License for more details. - - You should have received a copy of the GNU Lesser General Public - License along with this library; if not, write to the Free Software - Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA -*/ - -#include "variant.h" -#include "nrf.h" -#include "wiring_constants.h" -#include "wiring_digital.h" - -const uint32_t g_ADigitalPinMap[] = { - // P0 - 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24, 25, 26, 27, 28, 29, 30, 31, - - // P1 - 32, 33, 34, 35, 36, 37, 38, 39, 40, 41, 42, 43, 44, 45, 46, 47}; - -void initVariant() -{ - // LED1 & LED2 - pinMode(PIN_LED1, OUTPUT); - ledOff(PIN_LED1); - - pinMode(PIN_LED2, OUTPUT); - ledOff(PIN_LED2); - - // 3V3 Power Rail - pinMode(PIN_3V3_EN, OUTPUT); - digitalWrite(PIN_3V3_EN, HIGH); - -// Initialize trackball pins as inputs with pullup -#ifdef HAS_TRACKBALL - pinMode(TB_UP, INPUT_PULLUP); - pinMode(TB_DOWN, INPUT_PULLUP); - pinMode(TB_LEFT, INPUT_PULLUP); - pinMode(TB_RIGHT, INPUT_PULLUP); - pinMode(TB_PRESS, INPUT_PULLUP); -#endif -} diff --git a/variants/nrf52840/gat562_mesh_tracker_pro/variant.h b/variants/nrf52840/gat562_mesh_tracker_pro/variant.h deleted file mode 100644 index 367e0c491..000000000 --- a/variants/nrf52840/gat562_mesh_tracker_pro/variant.h +++ /dev/null @@ -1,300 +0,0 @@ -/* - Copyright (c) 2014-2015 Arduino LLC. All right reserved. - Copyright (c) 2016 Sandeep Mistry All right reserved. - Copyright (c) 2018, Adafruit Industries (adafruit.com) - - This library is free software; you can redistribute it and/or - modify it under the terms of the GNU Lesser General Public - License as published by the Free Software Foundation; either - version 2.1 of the License, or (at your option) any later version. - This library is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. - See the GNU Lesser General Public License for more details. - You should have received a copy of the GNU Lesser General Public - License along with this library; if not, write to the Free Software - Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA -*/ - -#ifndef _VARIANT_GAT562_MESH_TRACKER_PRO_ -#define _VARIANT_GAT562_MESH_TRACKER_PRO_ - -// led pin 2 (blue), see https://github.com/meshtastic/firmware/blob/master/src/mesh/NodeDB.cpp#L723 -#define RAK4630 - -/** Master clock frequency */ -#define VARIANT_MCK (64000000ul) - -#define USE_LFXO // Board uses 32khz crystal for LF -// define USE_LFRC // Board uses RC for LF - -/*---------------------------------------------------------------------------- - * Headers - *----------------------------------------------------------------------------*/ - -#include "WVariant.h" - -#ifdef __cplusplus -extern "C" { -#endif // __cplusplus - -// Number of pins defined in PinDescription array -#define PINS_COUNT (48) -#define NUM_DIGITAL_PINS (48) -#define NUM_ANALOG_INPUTS (6) -#define NUM_ANALOG_OUTPUTS (0) - -// LEDs -#define PIN_LED1 (35) -#define PIN_LED2 (36) - -#define LED_BUILTIN PIN_LED1 -#define LED_CONN PIN_LED2 - -#define LED_GREEN PIN_LED1 -#define LED_BLUE PIN_LED2 - -#define LED_STATE_ON 1 // State when LED is litted - -/* - * Buttons - */ - -#define CANCEL_BUTTON_PIN 9 -#define BUTTON_NEED_PULLUP -#define CANCEL_BUTTON_ACTIVE_LOW true -#define CANCEL_BUTTON_ACTIVE_PULLUP false - -/* - * Analog pins - */ -#define PIN_A0 (5) -#define PIN_A1 (31) -#define PIN_A2 (28) -#define PIN_A3 (29) -#define PIN_A4 (30) -#define PIN_A5 (31) -#define PIN_A6 (0xff) -#define PIN_A7 (0xff) - -static const uint8_t A0 = PIN_A0; -static const uint8_t A1 = PIN_A1; -static const uint8_t A2 = PIN_A2; -static const uint8_t A3 = PIN_A3; -static const uint8_t A4 = PIN_A4; -static const uint8_t A5 = PIN_A5; -static const uint8_t A6 = PIN_A6; -static const uint8_t A7 = PIN_A7; -#define ADC_RESOLUTION 14 - -// Other pins -#define PIN_AREF (2) -#define PIN_NFC1 (9) -#define PIN_NFC2 (10) - -static const uint8_t AREF = PIN_AREF; - -/* - * Serial interfaces - */ -#define PIN_SERIAL1_RX (15) -#define PIN_SERIAL1_TX (16) - -// Connected to Jlink CDC -#define PIN_SERIAL2_RX (8) -#define PIN_SERIAL2_TX (6) - -/* - * SPI Interfaces - */ -#define SPI_INTERFACES_COUNT 2 - -#define PIN_SPI_MISO (45) -#define PIN_SPI_MOSI (44) -#define PIN_SPI_SCK (43) - -#define PIN_SPI1_MISO (29) // (0 + 29) -#define PIN_SPI1_MOSI (30) // (0 + 30) -#define PIN_SPI1_SCK (3) // (0 + 3) - -static const uint8_t SS = 42; -static const uint8_t MOSI = PIN_SPI_MOSI; -static const uint8_t MISO = PIN_SPI_MISO; -static const uint8_t SCK = PIN_SPI_SCK; - -/* - * eink display pins - */ - -// #define PIN_EINK_CS (0 + 26) -// #define PIN_EINK_BUSY (0 + 4) -// #define PIN_EINK_DC (0 + 17) -// #define PIN_EINK_RES (-1) -// #define PIN_EINK_SCLK (0 + 3) -// #define PIN_EINK_MOSI (0 + 30) // also called SDI - -// #define USE_EINK - -// Display - OLED connected via I2C -#define HAS_SCREEN 1 -#define USE_SSD1306 - -// RAKRGB -// #define HAS_NCP5623 - -/* - * Wire Interfaces - */ -#define WIRE_INTERFACES_COUNT 1 - -#define PIN_WIRE_SDA (13) -#define PIN_WIRE_SCL (14) - -// QSPI Pins -#define PIN_QSPI_SCK 3 -#define PIN_QSPI_CS 26 -#define PIN_QSPI_IO0 30 -#define PIN_QSPI_IO1 29 -#define PIN_QSPI_IO2 28 -#define PIN_QSPI_IO3 2 - -// On-board QSPI Flash -#define EXTERNAL_FLASH_DEVICES IS25LP080D -#define EXTERNAL_FLASH_USE_QSPI - -/* @note RAK5005-O GPIO mapping to RAK4631 GPIO ports - RAK5005-O <-> nRF52840 - IO1 <-> P0.17 (Arduino GPIO number 17) - IO2 <-> P1.02 (Arduino GPIO number 34) - IO3 <-> P0.21 (Arduino GPIO number 21) - IO4 <-> P0.04 (Arduino GPIO number 4) - IO5 <-> P0.09 (Arduino GPIO number 9) - IO6 <-> P0.10 (Arduino GPIO number 10) - IO7 <-> P0.28 (Arduino GPIO number 28) - SW1 <-> P0.01 (Arduino GPIO number 1) - A0 <-> P0.04/AIN2 (Arduino Analog A2 - A1 <-> P0.31/AIN7 (Arduino Analog A7 - SPI_CS <-> P0.26 (Arduino GPIO number 26) - */ - -// RAK4630 LoRa module - -/* Setup of the SX1262 LoRa module ( https://docs.rakwireless.com/Product-Categories/WisBlock/RAK4631/Datasheet/ ) - -P1.10 NSS SPI NSS (Arduino GPIO number 42) -P1.11 SCK SPI CLK (Arduino GPIO number 43) -P1.12 MOSI SPI MOSI (Arduino GPIO number 44) -P1.13 MISO SPI MISO (Arduino GPIO number 45) -P1.14 BUSY BUSY signal (Arduino GPIO number 46) -P1.15 DIO1 DIO1 event interrupt (Arduino GPIO number 47) -P1.06 NRESET NRESET manual reset of the SX1262 (Arduino GPIO number 38) - -Important for successful SX1262 initialization: - -* Setup DIO2 to control the antenna switch -* Setup DIO3 to control the TCXO power supply -* Setup the SX1262 to use it's DCDC regulator and not the LDO -* RAK4630 schematics show GPIO P1.07 connected to the antenna switch, but it should not be initialized, as DIO2 will do the -control of the antenna switch - -SO GPIO 39/TXEN MAY NOT BE DEFINED FOR SUCCESSFUL OPERATION OF THE SX1262 - TG - -*/ - -// configure the SET pin on the RAK12039 sensor board to disable the sensor while not reading -// air quality telemetry. PIN_NFC2 doesn't seem to be used anywhere else in the codebase, but if -// you're having problems with your node behaving weirdly when a RAK12039 board isn't connected, -// try disabling this. -// #define PMSA003I_ENABLE_PIN PIN_NFC2 - -// #define DETECTION_SENSOR_EN 4 - -#define USE_SX1262 -#define SX126X_CS (42) -#define SX126X_DIO1 (47) -#define SX126X_BUSY (46) -#define SX126X_RESET (38) -// #define SX126X_TXEN (39) -// #define SX126X_RXEN (37) -#define SX126X_POWER_EN (37) -// DIO2 controlls an antenna switch and the TCXO voltage is controlled by DIO3 -#define SX126X_DIO2_AS_RF_SWITCH -#define SX126X_DIO3_TCXO_VOLTAGE 1.8 - -// Testing USB detection -#define NRF_APM - -// enables 3.3V periphery like GPS or IO Module -// Do not toggle this for GPS power savings -#define PIN_3V3_EN (34) - -// RAK1910 GPS module -// If using the wisblock GPS module and pluged into Port A on WisBlock base -// IO1 is hooked to PPS (pin 12 on header) = gpio 17 -// IO2 is hooked to GPS RESET = gpio 34, but it can not be used to this because IO2 is ALSO used to control 3V3_S power (1 is on). -// Therefore must be 1 to keep peripherals powered -// Power is on the controllable 3V3_S rail -// #define PIN_GPS_RESET (34) -// #define PIN_GPS_EN PIN_3V3_EN -#define PIN_GPS_PPS (17) // Pulse per second input from the GPS - -#define GPS_BAUDRATE 9600 - -#define GPS_RX_PIN PIN_SERIAL1_RX -#define GPS_TX_PIN PIN_SERIAL1_TX - -// Define pin to enable GPS toggle (set GPIO to LOW) via user button triple press - -// RAK12002 RTC Module -// #define RV3028_RTC (uint8_t)0b1010010 - -// RAK18001 Buzzer in Slot C -// #define PIN_BUZZER 21 // IO3 is PWM2 -// NEW: set this via protobuf instead! - -// Battery -// The battery sense is hooked to pin A0 (5) -#define BATTERY_PIN PIN_A0 -// and has 12 bit resolution -#define BATTERY_SENSE_RESOLUTION_BITS 12 -#define BATTERY_SENSE_RESOLUTION 4096.0 -#undef AREF_VOLTAGE -#define AREF_VOLTAGE 3.0 -#define VBAT_AR_INTERNAL AR_INTERNAL_3_0 -#define ADC_MULTIPLIER 1.73 - -// #define HAS_RTC 1 - -// #define HAS_ETHERNET 1 - -// #define RAK_4631 1 - -// #define PIN_ETHERNET_RESET 21 -// #define PIN_ETHERNET_SS PIN_EINK_CS -// #define ETH_SPI_PORT SPI1 -// #define AQ_SET_PIN 10 - -// ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ -// Trackball Configuration -// ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ -#define CANNED_MESSAGE_MODULE_ENABLE 1 -#define CANNED_MESSAGE_ADD_CONFIRMATION 1 - -// Trackball pins -#define HAS_TRACKBALL 1 -#define TB_LEFT 30 // P0.30 -#define TB_DOWN 4 // P0.04 -#define TB_RIGHT 31 // P0.31 -#define TB_UP 28 // P0.28 -#define TB_PRESS 26 // P0.26 (SELECT) -#define TB_DIRECTION FALLING - -#ifdef __cplusplus -} -#endif - -/*---------------------------------------------------------------------------- - * Arduino objects - C++ only - *----------------------------------------------------------------------------*/ - -#endif