RP2040/RP2350: Migrate variants to new structure

variants/rp2040/ec_catsniffer/platformio.ini

@@ -2,13 +2,13 @@
 extends = rp2040_base
 board = rpipico
 upload_protocol = picotool
-
+build_flags = 
-build_flags = ${rp2040_base.build_flags} 
+  ${rp2040_base.build_flags}
-  -DRPI_PICO
+  -D RPI_PICO
-  -Ivariants/ec_catsniffer
+  -I variants/rp2040/ec_catsniffer
-  -DDEBUG_RP2040_PORT=Serial
+  -D DEBUG_RP2040_PORT=Serial
-  # -DHW_SPI1_DEVICE
+  ; -D HW_SPI1_DEVICE
 lib_deps =
   ${rp2040_base.lib_deps}
 debug_build_flags = ${rp2040_base.build_flags}, -g
-debug_tool = cmsis-dap
+debug_tool = cmsis-dap

variants/rp2040/feather_rp2040_rfm95/platformio.ini

@@ -2,14 +2,14 @@
 extends = rp2040_base
 board = adafruit_feather
 upload_protocol = picotool
-
 # add our variants files to the include and src paths
-build_flags = ${rp2040_base.build_flags} 
+build_flags = 
-  -DRP2040_FEATHER_RFM95
+  ${rp2040_base.build_flags} 
-  -Ivariants/feather_rp2040_rfm95
+  -D RP2040_FEATHER_RFM95
-  -DDEBUG_RP2040_PORT=Serial
+  -I variants/rp2040/feather_rp2040_rfm95
-  -DHW_SPI1_DEVICE
+  -D DEBUG_RP2040_PORT=Serial
+  -D HW_SPI1_DEVICE
 lib_deps =
   ${rp2040_base.lib_deps}
 debug_build_flags = ${rp2040_base.build_flags}
-debug_tool = cmsis-dap ; for e.g. Picotool
+debug_tool = cmsis-dap ; for e.g. Picotool

variants/rp2040/nibble_rp2040/platformio.ini

@@ -3,14 +3,14 @@ extends = rp2040_base
 board = rpipico
 board_level = extra
 upload_protocol = picotool
-
 # add our variants files to the include and src paths
-build_flags = ${rp2040_base.build_flags} 
+build_flags =
-  -DPRIVATE_HW
+  ${rp2040_base.build_flags}
-  -Ivariants/nibble_rp2040
+  -D PRIVATE_HW
-  -DDEBUG_RP2040_PORT=Serial
+  -I variants/rp2040/nibble_rp2040
-  -DHW_SPI1_DEVICE
+  -D DEBUG_RP2040_PORT=Serial
+  -D HW_SPI1_DEVICE
 lib_deps =
   ${rp2040_base.lib_deps}
 debug_build_flags = ${rp2040_base.build_flags}, -g
-debug_tool = cmsis-dap ; for e.g. Picotool
+debug_tool = cmsis-dap ; for e.g. Picotool

variants/rp2040/rak11310/platformio.ini

@@ -2,18 +2,18 @@
 extends = rp2040_base
 board = rakwireless_rak11300
 upload_protocol = picotool
-
 # add our variants files to the include and src paths
-build_flags = ${rp2040_base.build_flags} 
+build_flags = 
-  -DRAK11310
+  ${rp2040_base.build_flags} 
-  -Ivariants/rak11310
+  -D RAK11310
-  -DDEBUG_RP2040_PORT=Serial
+  -I variants/rp2040/rak11310
-  -DRV3028_RTC=0x52
+  -D DEBUG_RP2040_PORT=Serial
-build_src_filter = ${rp2040_base.build_src_filter} +<../variants/rak11310> +<mesh/eth/> +<mesh/api/> +<mqtt/>
+  -D RV3028_RTC=0x52
+build_src_filter = ${rp2040_base.build_src_filter} +<../variants/rp2040/rak11310> +<mesh/eth/> +<mesh/api/> +<mqtt/>
 lib_deps =
   ${rp2040_base.lib_deps}
   ${networking_base.lib_deps}
   melopero/Melopero RV3028@^1.1.0
   https://github.com/RAKWireless/RAK13800-W5100S/archive/1.0.2.zip
 debug_build_flags = ${rp2040_base.build_flags}, -g
-debug_tool = cmsis-dap ; for e.g. Picotool
+debug_tool = cmsis-dap ; for e.g. Picotool

variants/rp2040/rp2040-lora/platformio.ini

@@ -2,14 +2,14 @@
 extends = rp2040_base
 board = rpipico
 upload_protocol = picotool
-
 # add our variants files to the include and src paths
-build_flags = ${rp2040_base.build_flags} 
+build_flags =
-  -DRP2040_LORA
+  ${rp2040_base.build_flags}
-  -Ivariants/rp2040-lora
+  -D RP2040_LORA
-  -DDEBUG_RP2040_PORT=Serial
+  -I variants/rp2040/rp2040-lora
-  -DHW_SPI1_DEVICE
+  -D DEBUG_RP2040_PORT=Serial
+  -D HW_SPI1_DEVICE
 lib_deps =
   ${rp2040_base.lib_deps}
 debug_build_flags = ${rp2040_base.build_flags}, -g
-debug_tool = cmsis-dap ; for e.g. Picotool
+debug_tool = cmsis-dap ; for e.g. Picotool

variants/rp2040/rpipico-slowclock/platformio.ini

@@ -12,11 +12,11 @@ debug_init_cmds =
   $LOAD_CMDS
   monitor init
   monitor reset halt
-
 # add our variants files to the include and src paths
-build_flags = ${rp2040_base.build_flags} 
+build_flags = 
+  ${rp2040_base.build_flags} 
   -DRPI_PICO
-  -Ivariants/rpipico-slowclock
+  -Ivariants/rp2040/rpipico-slowclock
   -DDEBUG_RP2040_PORT=Serial2
   -DHW_SPI1_DEVICE
   -g
@@ -25,4 +25,4 @@ lib_deps =
   ${rp2040_base.lib_deps}
 debug_build_flags = ${rp2040_base.build_flags}
   -g
-  -DNO_USB
+  -DNO_USB

variants/rp2040/rpipico/platformio.ini

@@ -4,12 +4,13 @@ board = rpipico
 upload_protocol = picotool
 
 # add our variants files to the include and src paths
-build_flags = ${rp2040_base.build_flags} 
+build_flags =
-  -DRPI_PICO
+  ${rp2040_base.build_flags}
-  -Ivariants/rpipico
+  -D RPI_PICO
-  -DDEBUG_RP2040_PORT=Serial
+  -I variants/rp2040/rpipico
-  -DHW_SPI1_DEVICE
+  -D DEBUG_RP2040_PORT=Serial
+  -D HW_SPI1_DEVICE
 lib_deps =
   ${rp2040_base.lib_deps}
 debug_build_flags = ${rp2040_base.build_flags}, -g
-debug_tool = cmsis-dap ; for e.g. Picotool
+debug_tool = cmsis-dap ; for e.g. Picotool

variants/rp2040/rpipicow/platformio.ini

@@ -2,14 +2,14 @@
 extends = rp2040_base
 board = rpipicow
 upload_protocol = picotool
-
 # add our variants files to the include and src paths
-build_flags = ${rp2040_base.build_flags} 
+build_flags = 
-  -DRPI_PICO
+  ${rp2040_base.build_flags}
-  -Ivariants/rpipicow
+  -D RPI_PICO
-  -DHW_SPI1_DEVICE
+  -I variants/rp2040/rpipicow
+  -D HW_SPI1_DEVICE
+  -D HAS_UDP_MULTICAST=1
   -fexceptions  # for exception handling in MQTT
-  -DHAS_UDP_MULTICAST=1
 build_src_filter = ${rp2040_base.build_src_filter} +<mesh/wifi/>
 lib_deps =
   ${rp2040_base.lib_deps}

variants/rp2040/senselora_rp2040/platformio.ini

@@ -5,9 +5,9 @@ board = rpipico
 upload_protocol = picotool
 
 # add our variants files to the include and src paths
-build_flags = ${rp2040_base.build_flags} 
+build_flags = ${rp2040_base.build_flags}
-  -DSENSELORA_RP2040
+  -D SENSELORA_RP2040
-  -Ivariants/senselora_rp2040
+  -I variants/rp2040/senselora_rp2040
-  -DDEBUG_RP2040_PORT=Serial
+  -D DEBUG_RP2040_PORT=Serial
 lib_deps =
   ${rp2040_base.lib_deps}

variants/rp2040/senselora_rp2040/variant.h

@@ -6,6 +6,7 @@
 #define BUTTON_NEED_PULLUP
 
 #define LED_PIN PIN_LED
+#define ledOff(pin) pinMode(pin, INPUT)
 
 #undef BATTERY_PIN
 #define BATTERY_SENSE_RESOLUTION_BITS ADC_RESOLUTION

variants/rp2350/rpipico2/platformio.ini

@@ -4,12 +4,13 @@ board = rpipico2
 upload_protocol = picotool
 
 # add our variants files to the include and src paths
-build_flags = ${rp2350_base.build_flags} 
+build_flags =
-  -DRPI_PICO2
+  ${rp2350_base.build_flags}
-  -Ivariants/rpipico2
+  -D RPI_PICO2
-  -DDEBUG_RP2040_PORT=Serial
+  -I variants/rp2350/rpipico2
-  -DHW_SPI1_DEVICE
+  -D DEBUG_RP2040_PORT=Serial
+  -D HW_SPI1_DEVICE
 lib_deps =
   ${rp2350_base.lib_deps}
 debug_build_flags = ${rp2350_base.build_flags}, -g
-debug_tool = cmsis-dap ; for e.g. Picotool
+debug_tool = cmsis-dap ; for e.g. Picotool

variants/rp2350/rpipico2w/platformio.ini

@@ -13,9 +13,10 @@ debug_init_cmds =
   monitor reset halt
 
 # add our variants files to the include and src paths
-build_flags = ${rp2350_base.build_flags} 
+build_flags =
+  ${rp2350_base.build_flags}
   -DRPI_PICO2
-  -Ivariants/rpipico2w
+  -Ivariants/rp2350/rpipico2w
 #  -DDEBUG_RP2040_PORT=Serial
   -DHW_SPI1_DEVICE
   -DARDUINO_RASPBERRY_PI_PICO_2W