Merge branch 'master' into tft-gui-work

protobufs

@@ -1 +1 @@
-Subproject commit b2b145e3321beab1441fa59290137ab42eb38dc8
+Subproject commit 556e49ba619e2f4d8fa3c2dee2a94129a43d5f08

src/configuration.h

@@ -111,6 +111,7 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define MCP9808_ADDR 0x18
 #define INA_ADDR 0x40
 #define INA_ADDR_ALTERNATE 0x41
+#define INA_ADDR_WAVESHARE_UPS 0x43
 #define INA3221_ADDR 0x42
 #define QMC6310_ADDR 0x1C
 #define QMI8658_ADDR 0x6B

src/detect/ScanI2CTwoWire.cpp

@@ -183,8 +183,13 @@ void ScanI2CTwoWire::scanPort(I2CPort port)
 
 #if !defined(ARCH_PORTDUINO) && !defined(ARCH_STM32WL)
             case ATECC608B_ADDR:
-                type = ATECC608B;
-                if (atecc.begin(addr.address) == true) {
+#ifdef RP2040_SLOW_CLOCK
+                if (atecc.begin(addr.address, Wire, Serial2) == true)
+#else
+                if (atecc.begin(addr.address) == true)
+#endif
+
+                {
                     LOG_INFO("ATECC608B initialized\n");
                 } else {
                     LOG_WARN("ATECC608B initialization failed\n");
@@ -254,6 +259,7 @@ void ScanI2CTwoWire::scanPort(I2CPort port)
 
             case INA_ADDR:
             case INA_ADDR_ALTERNATE:
+            case INA_ADDR_WAVESHARE_UPS:
                 registerValue = getRegisterValue(ScanI2CTwoWire::RegisterLocation(addr, 0xFE), 2);
                 LOG_DEBUG("Register MFG_UID: 0x%x\n", registerValue);
                 if (registerValue == 0x5449) {

src/mesh/generated/meshtastic/deviceonly.pb.h

@@ -141,7 +141,8 @@ typedef struct _meshtastic_DeviceState {
  NodeDB.cpp in the device code. */
     uint32_t version;
     /* Used only during development.
- Indicates developer is testing and changes should never be saved to flash. */
+ Indicates developer is testing and changes should never be saved to flash.
+ Deprecated in 2.3.1 */
     bool no_save;
     /* Some GPS receivers seem to have bogus settings from the factory, so we always do one factory reset. */
     bool did_gps_reset;

src/modules/NodeInfoModule.cpp

@@ -58,8 +58,8 @@ void NodeInfoModule::sendOurNodeInfo(NodeNum dest, bool wantReplies, uint8_t cha
 meshtastic_MeshPacket *NodeInfoModule::allocReply()
 {
     uint32_t now = millis();
-    // If we sent our NodeInfo less than 1 min. ago, don't send it again as it may be still underway.
-    if (lastSentToMesh && (now - lastSentToMesh) < 60 * 1000) {
+    // If we sent our NodeInfo less than 5 min. ago, don't send it again as it may be still underway.
+    if (lastSentToMesh && (now - lastSentToMesh) < (5 * 60 * 1000)) {
         LOG_DEBUG("Sending NodeInfo will be ignored since we just sent it.\n");
         ignoreRequest = true; // Mark it as ignored for MeshModule
         return NULL;

src/modules/Telemetry/Sensor/INA219Sensor.cpp

@@ -4,6 +4,10 @@
 #include "configuration.h"
 #include <Adafruit_INA219.h>
 
+#ifndef INA219_MULTIPLIER
+#define INA219_MULTIPLIER 1.0f
+#endif
+
 INA219Sensor::INA219Sensor() : TelemetrySensor(meshtastic_TelemetrySensorType_INA219, "INA219") {}
 
 int32_t INA219Sensor::runOnce()
@@ -26,7 +30,7 @@ void INA219Sensor::setup() {}
 bool INA219Sensor::getMetrics(meshtastic_Telemetry *measurement)
 {
     measurement->variant.environment_metrics.voltage = ina219.getBusVoltage_V();
-    measurement->variant.environment_metrics.current = ina219.getCurrent_mA();
+    measurement->variant.environment_metrics.current = ina219.getCurrent_mA() * INA219_MULTIPLIER;
     return true;
 }
 

variants/rpipico-slowclock/platformio.ini

@@ -0,0 +1,28 @@
+[env:pico_slowclock]
+extends = rp2040_base
+board = rpipico
+upload_protocol = jlink
+# debug settings for external openocd with RP2040 support (custom build)
+debug_tool = custom
+debug_init_cmds =
+  target extended-remote localhost:3333
+  $INIT_BREAK
+  monitor reset halt
+  $LOAD_CMDS
+  monitor init
+  monitor reset halt
+
+# add our variants files to the include and src paths
+build_flags = ${rp2040_base.build_flags} 
+  -DRPI_PICO
+  -Ivariants/rpipico_slowclock
+  -DDEBUG_RP2040_PORT=Serial2
+  -DHW_SPI1_DEVICE
+  -L "${platformio.libdeps_dir}/${this.__env__}/BSEC2 Software Library/src/cortex-m0plus"
+  -g
+  -DNO_USB
+lib_deps =
+  ${rp2040_base.lib_deps}
+debug_build_flags = ${rp2040_base.build_flags}
+  -g
+  -DNO_USB

variants/rpipico-slowclock/variant.h

@@ -0,0 +1,87 @@
+#define ARDUINO_ARCH_AVR
+
+// Build with slow system clock enabled to reduce power consumption.
+#define RP2040_SLOW_CLOCK
+
+#ifdef RP2040_SLOW_CLOCK
+// Redefine UART1 serial log output to avoid collision with UART0 for GPS.
+#define SERIAL2_TX 4
+#define SERIAL2_RX 5
+// Reroute log output in SensorLib when USB is not available
+#define log_e(...) Serial2.printf(__VA_ARGS__)
+#define log_i(...) Serial2.printf(__VA_ARGS__)
+#define log_d(...) Serial2.printf(__VA_ARGS__)
+#endif
+
+// Expecting the Waveshare Pico GPS hat
+#define HAS_GPS 1
+
+// Enable OLED Screen
+#define HAS_SCREEN 1
+#define USE_SH1106 1
+#define RESET_OLED 13
+
+// Redefine I2C0 pins to avoid collision with UART1/Serial2.
+#define I2C_SDA 8
+#define I2C_SCL 9
+
+// Redefine Waveshare UPS-A/B I2C_1 pins:
+#define I2C_SDA1 6
+#define I2C_SCL1 7
+// Waveshare UPS-A/B uses a 0.01 Ohm shunt for the INA219 sensor
+#define INA219_MULTIPLIER 10.0f
+
+// Waveshare Pico GPS L76B pins:
+#define GPS_RX_PIN 1
+#define GPS_TX_PIN 0
+
+// Wakeup from backup mode
+// #define PIN_GPS_FORCE_ON 14
+// No GPS reset available
+#undef PIN_GPS_RESET
+/*
+ * For PPS output the resistor R20 needs to be populated with 0 Ohm
+ * on the Waveshare Pico GPS board.
+ */
+#define PIN_GPS_PPS 16
+/*
+ * For standby mode switching the resistor R18 needs to be populated
+ * with 0 Ohm on the Waveshare Pico GPS board.
+ */
+#define PIN_GPS_STANDBY 17
+
+#define BUTTON_PIN 18
+#define EXT_NOTIFY_OUT 22
+#define LED_PIN PIN_LED
+
+#define BATTERY_PIN 26
+// ratio of voltage divider = 3.0 (R17=200k, R18=100k)
+#define ADC_MULTIPLIER 3.1 // 3.0 + a bit for being optimistic
+#define BATTERY_SENSE_RESOLUTION_BITS ADC_RESOLUTION
+
+#define USE_SX1262
+
+#undef LORA_SCK
+#undef LORA_MISO
+#undef LORA_MOSI
+#undef LORA_CS
+
+#define LORA_SCK 10
+#define LORA_MISO 12
+#define LORA_MOSI 11
+#define LORA_CS 3
+
+#define LORA_DIO0 RADIOLIB_NC
+#define LORA_RESET 15
+#define LORA_DIO1 20
+#define LORA_DIO2 2
+#define LORA_DIO3 RADIOLIB_NC
+
+#ifdef USE_SX1262
+#define SX126X_CS LORA_CS
+#define SX126X_DIO1 LORA_DIO1
+#define SX126X_BUSY LORA_DIO2
+#define SX126X_RESET LORA_RESET
+#define SX126X_DIO2_AS_RF_SWITCH
+#define SX126X_DIO3_TCXO_VOLTAGE 1.8
+#endif