Merge branch 'master' into master

platformio.ini

@@ -9,7 +9,7 @@
 ; https://docs.platformio.org/page/projectconf.html
 
 [platformio]
-default_envs = tbeam # lora-relay-v1 # nrf52840dk-geeksville # linux # or if you'd like to change the default to something like lora-relay-v1 put that here
+default_envs = linux # lora-relay-v1 # nrf52840dk-geeksville # linux # or if you'd like to change the default to something like lora-relay-v1 put that here
 ;default_envs = heltec # lora-relay-v1 # nrf52840dk-geeksville # linux # or if you'd like to change the default to something like lora-relay-v1 put that here
 
 [common]
@@ -65,7 +65,7 @@ lib_deps =
   1202 ; CRC32, explicitly needed because dependency is missing in the ble ota update lib
   https://github.com/meshtastic/arduino-fsm.git#2f106146071fc7bc620e1e8d4b88dc4e0266ce39
   https://github.com/meshtastic/SparkFun_Ublox_Arduino_Library.git#31015a55e630a2df77d9d714669c621a5bf355ad
-  https://github.com/meshtastic/RadioLib.git#8657380241bce681c33aab46598bbf13b11f876c
+  https://github.com/meshtastic/RadioLib.git#07de964e929238949035fb0d5887026a3058df1a
   https://github.com/meshtastic/TinyGPSPlus.git#9c1d584d2469523381e077b0b9c1bf868d6c0206
   https://github.com/meshtastic/AXP202X_Library.git#8404abb6d4b486748636bc6ad72d2a47baaf5460
   Wire ; explicitly needed here because the AXP202 library forgets to add it
@@ -314,3 +314,10 @@ src_filter = ${env.src_filter} -<esp32/> -<nimble/> -<nrf52/> -<meshwifi/>
 build_flags = ${arduino_base.build_flags} -O0
 framework = arduino
 board = linux_x86_64
+
+; The GenieBlocks LORA prototype board
+[env:genieblocks_lora]
+extends = esp32_base
+board = genieblocks_lora
+build_flags = 
+  ${esp32_base.build_flags} -D GENIEBLOCKS

src/configuration.h

@@ -338,6 +338,35 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define LORA_DIO1 35 // Not really used
 #define LORA_DIO2 34 // Not really used
 
+#elif defined(GENIEBLOCKS)
+// This string must exactly match the case used in release file names or the android updater won't work
+#define HW_VENDOR "genieblocks"
+#undef GPS_RX_PIN
+#undef GPS_TX_PIN
+#define GPS_RX_PIN 5
+#define GPS_TX_PIN 18
+#define GPS_RESET_N 10
+#define GPS_EXTINT 23 // On MAX-M8 module pin name is EXTINT. On L70 module pin name is STANDBY.
+
+#define BATTERY_PIN 39 // A battery voltage measurement pin, voltage divider connected here to measure battery voltage
+#define BATTERY_EN_PIN 14 // Voltage voltage divider enable pin connected to mosfet
+
+#define I2C_SDA 4 // I2C pins for this board
+#define I2C_SCL 2
+
+#define LED_PIN 12     // If defined we will blink this LED
+//#define BUTTON_PIN 36  // If defined, this will be used for user button presses (ToDo problem on that line on debug screen -->   Long press start!)
+//#define BUTTON_NEED_PULLUP //GPIOs 34 to 39 are GPIs – input only pins. These pins don’t have internal pull-ups or pull-down resistors. 
+
+#define USE_RF95
+#define LORA_DIO0 38 // a No connect on the SX1262 module
+#define LORA_RESET 9
+
+#define RF95_SCK 22
+#define RF95_MISO 19
+#define RF95_MOSI 13
+#define RF95_NSS 21
+
 #endif
 
 #ifdef ARDUINO_NRF52840_PCA10056
@@ -365,7 +394,7 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 #define USE_RF95
 #define LORA_DIO0 26 // a No connect on the SX1262 module
-#define LORA_RESET 23
+#define LORA_RESET RADIOLIB_NC
 #define LORA_DIO1 33 // Not really used
 #define LORA_DIO2 32 // Not really used
 

src/esp32/WiFiServerAPI.cpp

@@ -28,18 +28,19 @@ void WiFiServerAPI::onConnectionChanged(bool connected)
     }
 }
 
-void WiFiServerAPI::loop()
+/// override close to also shutdown the TCP link
+void WiFiServerAPI::close() {
+    client.stop(); // drop tcp connection
+    StreamAPI::close();
+}
+
+bool WiFiServerAPI::loop()
 {
     if (client.connected()) {
         StreamAPI::loop();
-    } else if(isConnected) {
+        return true;
-        // If our API link was up, shut it down
+    } else {
-
+        return false;       
-        DEBUG_MSG("Client dropped connection, closing API client\n");
-        // Note: we can't call delete here because this object includes other state
-        // besides the stream API.  Instead kill it later when we start a new instance
-        // delete this;
-        close();
     }
 }
 
@@ -58,15 +59,25 @@ int32_t WiFiServerPort::runOnce()
     auto client = available();
     if (client) {
         // Close any previous connection (see FIXME in header file)
-        if (openAPI)
+        if (openAPI) {
+            DEBUG_MSG("Force closing previous TCP connection\n");
             delete openAPI;
+        }
 
         openAPI = new WiFiServerAPI(client);
     }
 
     if (openAPI) {
         // Allow idle processing so the API can read from its incoming stream
-        openAPI->loop();
+        if(!openAPI->loop()) {
+            // If our API link was up, shut it down
+
+            DEBUG_MSG("Client dropped connection, closing API client\n");
+            // Note: we can't call delete here because this object includes other state
+            // besides the stream API.  Instead kill it later when we start a new instance
+            delete openAPI;
+            openAPI = NULL;
+        }
         return 0; // run fast while our API server is running
     } else
         return 100; // only check occasionally for incoming connections

src/esp32/WiFiServerAPI.h

@@ -18,7 +18,11 @@ class WiFiServerAPI : public StreamAPI
 
     virtual ~WiFiServerAPI();
 
-    virtual void loop(); // Check for dropped client connections
+    /// @return true if we want to keep running, or false if we are ready to be destroyed
+    virtual bool loop(); // Check for dropped client connections
+
+    /// override close to also shutdown the TCP link
+    virtual void close();
 
   protected:
     /// Hookable to find out when connection changes

src/gps/RTC.cpp

@@ -36,6 +36,7 @@ bool perhapsSetRTC(RTCQuality q, const struct timeval *tv)
 
     bool shouldSet;
     if (q > currentQuality) {
+        currentQuality = q;
         shouldSet = true;
         DEBUG_MSG("Upgrading time to RTC %ld secs (quality %d)\n", tv->tv_sec, q);
     } else if(q == RTCQualityGPS && (now - lastSetMsec) > (12 * 60 * 60 * 1000L)) {

src/graphics/Screen.cpp

@@ -27,6 +27,7 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #include "NodeDB.h"
 #include "Screen.h"
 #include "configuration.h"
+#include "fonts.h"
 #include "graphics/images.h"
 #include "main.h"
 #include "mesh-pb-constants.h"
@@ -34,7 +35,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #include "plugins/TextMessagePlugin.h"
 #include "target_specific.h"
 #include "utils.h"
-#include "fonts.h"
 
 using namespace meshtastic; /** @todo remove */
 
@@ -42,7 +42,7 @@ namespace graphics
 {
 
 // This means the *visible* area (sh1106 can address 132, but shows 128 for example)
-#define IDLE_FRAMERATE 1        // in fps
+#define IDLE_FRAMERATE 1 // in fps
 #define COMPASS_DIAM 44
 
 // DEBUG
@@ -177,7 +177,6 @@ static void drawCriticalFaultFrame(OLEDDisplay *display, OLEDDisplayUiState *sta
     display->drawString(0 + x, FONT_HEIGHT_MEDIUM + y, "For help, please post on\nmeshtastic.discourse.group");
 }
 
-
 /// Draw the last text message we received
 static void drawTextMessageFrame(OLEDDisplay *display, OLEDDisplayUiState *state, int16_t x, int16_t y)
 {
@@ -316,7 +315,7 @@ static void drawGPS(OLEDDisplay *display, int16_t x, int16_t y, const GPSStatus
         display->drawFastImage(x + 24, y, 8, 8, imgSatellite);
 
         // Draw the number of satellites
-        sprintf(satsString, "%lu", gps->getNumSatellites());
+        sprintf(satsString, "%u", gps->getNumSatellites());
         display->drawString(x + 34, y - 2, satsString);
     }
 }
@@ -569,11 +568,11 @@ static void drawNodeInfo(OLEDDisplay *display, OLEDDisplayUiState *state, int16_
     uint32_t agoSecs = sinceLastSeen(node);
     static char lastStr[20];
     if (agoSecs < 120) // last 2 mins?
-        snprintf(lastStr, sizeof(lastStr), "%lu seconds ago", agoSecs);
+        snprintf(lastStr, sizeof(lastStr), "%u seconds ago", agoSecs);
     else if (agoSecs < 120 * 60) // last 2 hrs
-        snprintf(lastStr, sizeof(lastStr), "%lu minutes ago", agoSecs / 60);
+        snprintf(lastStr, sizeof(lastStr), "%u minutes ago", agoSecs / 60);
     else
-        snprintf(lastStr, sizeof(lastStr), "%lu hours ago", agoSecs / 60 / 60);
+        snprintf(lastStr, sizeof(lastStr), "%u hours ago", agoSecs / 60 / 60);
 
     static char distStr[20];
     strcpy(distStr, "? km"); // might not have location data
@@ -924,20 +923,21 @@ void Screen::handleStartBluetoothPinScreen(uint32_t pin)
     setFastFramerate();
 }
 
-void Screen::blink() {
+void Screen::blink()
+{
     setFastFramerate();
     uint8_t count = 10;
     dispdev.setBrightness(254);
-    while(count>0) {
+    while (count > 0) {
         dispdev.fillRect(0, 0, SCREEN_WIDTH, SCREEN_HEIGHT);
         dispdev.display();
         delay(50);
         dispdev.clear();
         dispdev.display();
         delay(50);
-        count = count -1;
+        count = count - 1;
     }
-     dispdev.setBrightness(brightness);
+    dispdev.setBrightness(brightness);
 }
 
 void Screen::handlePrint(const char *text)
@@ -1060,11 +1060,13 @@ void DebugInfo::drawFrameWiFi(OLEDDisplay *display, OLEDDisplayUiState *state, i
     if (WiFi.status() == WL_CONNECTED || isSoftAPForced() || radioConfig.preferences.wifi_ap_mode) {
         if (radioConfig.preferences.wifi_ap_mode || isSoftAPForced()) {
             display->drawString(x, y + FONT_HEIGHT_SMALL * 1, "IP: " + String(WiFi.softAPIP().toString().c_str()));
+
+            // Number of connections to the AP. Default mmax for the esp32 is 4
+            display->drawString(x + SCREEN_WIDTH - display->getStringWidth("(" + String(WiFi.softAPgetStationNum()) + "/4)"),
+                                y + FONT_HEIGHT_SMALL * 1, "(" + String(WiFi.softAPgetStationNum()) + "/4)");
         } else {
             display->drawString(x, y + FONT_HEIGHT_SMALL * 1, "IP: " + String(WiFi.localIP().toString().c_str()));
         }
-        display->drawString(x + SCREEN_WIDTH - display->getStringWidth("(" + String(WiFi.softAPgetStationNum()) + "/4)"),
-                            y + FONT_HEIGHT_SMALL * 1, "(" + String(WiFi.softAPgetStationNum()) + "/4)");
 
     } else if (WiFi.status() == WL_NO_SSID_AVAIL) {
         display->drawString(x, y + FONT_HEIGHT_SMALL * 1, "SSID Not Found");

src/main.cpp

@@ -389,6 +389,19 @@ void setup()
 
     readFromRTC(); // read the main CPU RTC at first (in case we can't get GPS time)
 
+#ifdef GENIEBLOCKS
+    //gps setup
+    pinMode (GPS_RESET_N, OUTPUT);
+    pinMode(GPS_EXTINT, OUTPUT);
+    digitalWrite(GPS_RESET_N, HIGH);
+    digitalWrite(GPS_EXTINT, LOW);
+    //battery setup
+    // If we want to read battery level, we need to set BATTERY_EN_PIN pin to low.
+    // ToDo: For low power consumption after read battery level, set that pin to high.
+    pinMode (BATTERY_EN_PIN, OUTPUT);
+    digitalWrite(BATTERY_EN_PIN, LOW);
+#endif
+
     // If we don't have bidirectional comms, we can't even try talking to UBLOX
     UBloxGPS *ublox = NULL;
 #ifdef GPS_TX_PIN

src/mesh/PhoneAPI.cpp

@@ -21,11 +21,17 @@ void PhoneAPI::init()
     observe(&service.fromNumChanged);
 }
 
+PhoneAPI::~PhoneAPI() {
+    close();
+}
+
 void PhoneAPI::close() {
     unobserve();
     state = STATE_SEND_NOTHING;
+    bool oldConnected = isConnected;
     isConnected = false;
-    onConnectionChanged(isConnected);
+    if(oldConnected != isConnected)
+        onConnectionChanged(isConnected);
 }
 
 void PhoneAPI::checkConnectionTimeout()

src/mesh/PhoneAPI.h

@@ -55,12 +55,15 @@ class PhoneAPI
   public:
     PhoneAPI();
 
+    /// Destructor - calls close()
+    virtual ~PhoneAPI();
+
     /// Do late init that can't happen at constructor time
     virtual void init();
 
     // Call this when the client drops the connection, resets the state to STATE_SEND_NOTHING
-    // Unregisters our observer
+    // Unregisters our observer.  A closed connection **can** be reopened by calling init again.
-    void close();
+    virtual void close();
 
     /**
      * Handle a ToRadio protobuf

src/mesh/RF95Interface.cpp

@@ -12,7 +12,7 @@
 #define POWER_DEFAULT 17 // How much power to use if the user hasn't set a power level
 
 RF95Interface::RF95Interface(RADIOLIB_PIN_TYPE cs, RADIOLIB_PIN_TYPE irq, RADIOLIB_PIN_TYPE rst, SPIClass &spi)
-    : RadioLibInterface(cs, irq, rst, 0, spi)
+    : RadioLibInterface(cs, irq, rst, RADIOLIB_NC, spi)
 {
     // FIXME - we assume devices never get destroyed
 }

src/mesh/RF95Interface.h

@@ -14,6 +14,9 @@ class RF95Interface : public RadioLibInterface
   public:
     RF95Interface(RADIOLIB_PIN_TYPE cs, RADIOLIB_PIN_TYPE irq, RADIOLIB_PIN_TYPE rst, SPIClass &spi);
 
+    /// Some boards (Pinetab Lora module) have broken IRQ wires, so we need to poll via i2c registers
+    bool isIRQPending() { return lora->getPendingIRQ(); }
+
     /// Initialise the Driver transport hardware and software.
     /// Make sure the Driver is properly configured before calling init().
     /// \return true if initialisation succeeded.

src/portduino/PortduinoGlue.cpp

@@ -1,5 +1,6 @@
 #include "CryptoEngine.h"
 #include "target_specific.h"
+#include "PortduinoGPIO.h"
 #include <Utility.h>
 #include "sleep.h"
 
@@ -34,4 +35,63 @@ void cpuDeepSleep(uint64_t msecs) {
 // FIXME - implement real crypto for linux
 CryptoEngine *crypto = new CryptoEngine();
 
-void updateBatteryLevel(uint8_t level) NOT_IMPLEMENTED("updateBatteryLevel");
+void updateBatteryLevel(uint8_t level) NOT_IMPLEMENTED("updateBatteryLevel");
+
+#include <assert.h>
+#include "mesh/RF95Interface.h"
+
+/** Dear pinetab hardware geeks!
+ * 
+ * The current pinetab lora module has a slight bug.  The ch341 part only provides ISR assertions on edges.
+ * This makes sense because USB interrupts happen through fast/repeated special irq urbs that are constantly
+ * chattering on the USB bus.
+ * 
+ * But this isn't sufficient for level triggered ISR sources like the sx127x radios.  The common way that seems to
+ * be addressed by cs341 users is to **always** connect the INT# (pin 26 on the ch341f) signal to one of the GPIO signals
+ * on the part.  I'd recommend connecting that LORA_DIO0/INT# line to pin 19 (data 4) on the pinetab board.  This would
+ * provide an efficent mechanism so that the (kernel) code in the cs341 driver that I've slightly hacked up to see the
+ * current state of LORA_DIO0.  Without that access, I can't know if the interrupt is still pending - which would create
+ * race conditions in packet handling.  
+ * 
+ * My workaround is to poll the status register internally to the sx127x.  Which is expensive because it involves a number of
+ * i2c transactions and many trips back and forth between kernel and my userspace app.  I think shipping the current version
+ * of the pinetab lora device would be fine because I can poll slowly (because lora is slow).  But if you ever have cause to
+ * rev this board.  I highly encourage this small change.
+ * 
+ * Btw - your little "USB lora dongle" is really neat.  I encourage you to sell it, because even non pinetab customers could
+ * use it to easily add lora to rasberry pi, desktop pcs etc...
+ * 
+ * Porduino helper class to do this i2c based polling:
+ */
+class R595PolledIrqPin : public GPIOPin {
+public:
+    R595PolledIrqPin() : GPIOPin(LORA_DIO0, "LORA_DIO0") {}
+
+    /// Read the low level hardware for this pin
+    virtual PinStatus readPinHardware()
+    {
+        if(isrPinStatus < 0)
+            return LOW; // No interrupt handler attached, don't bother polling i2c right now
+        else {
+            extern RadioInterface *rIf; // FIXME, temporary hack until we know if we need to keep this 
+
+            assert(rIf);
+            RF95Interface *rIf95 = static_cast<RF95Interface *>(rIf);
+            bool p = rIf95->isIRQPending();
+            // log(SysGPIO, LogDebug, "R595PolledIrqPin::readPinHardware(%s, %d, %d)", getName(), getPinNum(), p);
+            return p ? HIGH : LOW;
+        }
+    }
+};
+
+
+/** apps run under portduino can optionally define a portduinoSetup() to 
+ * use portduino specific init code (such as gpioBind) to setup portduino on their host machine,
+ * before running 'arduino' code.
+ */
+void  portduinoSetup() {
+  printf("Setting up Meshtastic on Porduino...\n");
+  gpioBind(new R595PolledIrqPin());
+  // gpioBind((new SimGPIOPin(LORA_RESET, "LORA_RESET")));
+  gpioBind((new SimGPIOPin(RF95_NSS, "RF95_NSS"))->setSilent());
+}