diff --git a/.github/workflows/build_esp32.yml b/.github/workflows/build_esp32.yml
index 7d069e3db..4fc31f22c 100644
--- a/.github/workflows/build_esp32.yml
+++ b/.github/workflows/build_esp32.yml
@@ -7,6 +7,8 @@ on:
         required: true
         type: string
 
+permissions: read-all
+
 jobs:
   build-esp32:
     runs-on: ubuntu-latest
@@ -24,6 +26,7 @@ jobs:
             ./arch/esp32/esp32s2.ini
             ./arch/esp32/esp32s3.ini
             ./arch/esp32/esp32c3.ini
+            ./arch/esp32/esp32c6.ini
           build-script-path: bin/build-esp32.sh
           ota-firmware-source: firmware.bin
           ota-firmware-target: release/bleota.bin
diff --git a/.github/workflows/build_esp32_c3.yml b/.github/workflows/build_esp32_c3.yml
index 5234dbe81..546762952 100644
--- a/.github/workflows/build_esp32_c3.yml
+++ b/.github/workflows/build_esp32_c3.yml
@@ -26,10 +26,12 @@ jobs:
             ./arch/esp32/esp32s2.ini
             ./arch/esp32/esp32s3.ini
             ./arch/esp32/esp32c3.ini
+            ./arch/esp32/esp32c6.ini
           build-script-path: bin/build-esp32.sh
           ota-firmware-source: firmware-c3.bin
           ota-firmware-target: release/bleota-c3.bin
           artifact-paths: |
             release/*.bin
             release/*.elf
+          include-web-ui: true
           arch: esp32c3
diff --git a/.github/workflows/build_esp32_c6.yml b/.github/workflows/build_esp32_c6.yml
index 66f2764a6..56d4d806d 100644
--- a/.github/workflows/build_esp32_c6.yml
+++ b/.github/workflows/build_esp32_c6.yml
@@ -33,4 +33,5 @@ jobs:
           artifact-paths: |
             release/*.bin
             release/*.elf
+          include-web-ui: true
           arch: esp32c6
diff --git a/.github/workflows/build_esp32_s3.yml b/.github/workflows/build_esp32_s3.yml
index 554b37cef..a9c067ee1 100644
--- a/.github/workflows/build_esp32_s3.yml
+++ b/.github/workflows/build_esp32_s3.yml
@@ -7,6 +7,8 @@ on:
         required: true
         type: string
 
+permissions: read-all
+
 jobs:
   build-esp32-s3:
     runs-on: ubuntu-latest
@@ -24,6 +26,7 @@ jobs:
             ./arch/esp32/esp32s2.ini
             ./arch/esp32/esp32s3.ini
             ./arch/esp32/esp32c3.ini
+            ./arch/esp32/esp32c6.ini
           build-script-path: bin/build-esp32.sh
           ota-firmware-source: firmware-s3.bin
           ota-firmware-target: release/bleota-s3.bin
diff --git a/arch/portduino/portduino.ini b/arch/portduino/portduino.ini
index 976951b4f..39d1c0b8c 100644
--- a/arch/portduino/portduino.ini
+++ b/arch/portduino/portduino.ini
@@ -32,6 +32,7 @@ build_flags =
   -Isrc/platform/portduino
   -DRADIOLIB_EEPROM_UNSUPPORTED
   -DPORTDUINO_LINUX_HARDWARE
+  -lstdc++fs
   -lbluetooth
   -lgpiod
   -lyaml-cpp
diff --git a/bin/device-install.bat b/bin/device-install.bat
index 6c880185e..f8ca9e408 100755
--- a/bin/device-install.bat
+++ b/bin/device-install.bat
@@ -2,6 +2,14 @@
 
 set PYTHON=python
 
+:: Determine the correct esptool command to use
+where esptool >nul 2>&1
+if %ERRORLEVEL% EQU 0 (
+    set "ESPTOOL_CMD=esptool"
+) else (
+    set "ESPTOOL_CMD=%PYTHON% -m esptool"
+)
+
 goto GETOPTS
 :HELP
 echo Usage: %~nx0 [-h] [-p ESPTOOL_PORT] [-P PYTHON] [-f FILENAME^|FILENAME]
@@ -24,32 +32,32 @@ IF NOT "__%1__"=="____" goto GETOPTS
 
 IF "__%FILENAME%__" == "____" (
     echo "Missing FILENAME"
-	goto HELP
+    goto HELP
 )
 IF EXIST %FILENAME% IF x%FILENAME:update=%==x%FILENAME% (
     echo Trying to flash update %FILENAME%, but first erasing and writing system information"
-	%PYTHON% -m esptool --baud 115200 erase_flash
-	%PYTHON% -m esptool --baud 115200 write_flash 0x00 %FILENAME%
+    %ESPTOOL_CMD% --baud 115200 erase_flash
+    %ESPTOOL_CMD% --baud 115200 write_flash 0x00 %FILENAME%
     
     @REM Account for S3 and C3 board's different OTA partition
     IF x%FILENAME:s3=%==x%FILENAME% IF x%FILENAME:v3=%==x%FILENAME% IF x%FILENAME:t-deck=%==x%FILENAME% IF x%FILENAME:wireless-paper=%==x%FILENAME% IF x%FILENAME:wireless-tracker=%==x%FILENAME% IF x%FILENAME:station-g2=%==x%FILENAME% IF x%FILENAME:unphone=%==x%FILENAME% (
         IF x%FILENAME:esp32c3=%==x%FILENAME% (
-            %PYTHON% -m esptool --baud 115200 write_flash 0x260000 bleota.bin
+            %ESPTOOL_CMD% --baud 115200 write_flash 0x260000 bleota.bin
         ) else (
-            %PYTHON% -m esptool --baud 115200 write_flash 0x260000 bleota-c3.bin
+            %ESPTOOL_CMD% --baud 115200 write_flash 0x260000 bleota-c3.bin
         )
-	) else (
-        %PYTHON% -m esptool --baud 115200 write_flash 0x260000 bleota-s3.bin
+    ) else (
+        %ESPTOOL_CMD% --baud 115200 write_flash 0x260000 bleota-s3.bin
     )
     for %%f in (littlefs-*.bin) do (
-        %PYTHON% -m esptool --baud 115200 write_flash 0x300000 %%f
+        %ESPTOOL_CMD% --baud 115200 write_flash 0x300000 %%f
     )
 ) else (
     echo "Invalid file: %FILENAME%"
-	goto HELP
+    goto HELP
 ) else (
     echo "Invalid file: %FILENAME%"
-	goto HELP
+    goto HELP
 )
 
 :EOF
diff --git a/bin/device-install.sh b/bin/device-install.sh
index 563a87af4..b2a5684ee 100755
--- a/bin/device-install.sh
+++ b/bin/device-install.sh
@@ -2,6 +2,18 @@
 
 PYTHON=${PYTHON:-$(which python3 python | head -n 1)}
 
+# Determine the correct esptool command to use
+if "$PYTHON" -m esptool version >/dev/null 2>&1; then
+    ESPTOOL_CMD="$PYTHON -m esptool"
+elif command -v esptool >/dev/null 2>&1; then
+    ESPTOOL_CMD="esptool"
+elif command -v esptool.py >/dev/null 2>&1; then
+    ESPTOOL_CMD="esptool.py"
+else
+    echo "Error: esptool not found"
+    exit 1
+fi
+
 set -e
 
 # Usage info
@@ -49,19 +61,19 @@ shift "$((OPTIND - 1))"
 
 if [ -f "${FILENAME}" ] && [ -n "${FILENAME##*"update"*}" ]; then
 	echo "Trying to flash ${FILENAME}, but first erasing and writing system information"
-	"$PYTHON" -m esptool erase_flash
-	"$PYTHON" -m esptool write_flash 0x00 ${FILENAME}
+	$ESPTOOL_CMD erase_flash
+	$ESPTOOL_CMD write_flash 0x00 ${FILENAME}
 	# Account for S3 board's different OTA partition
 	if [ -n "${FILENAME##*"s3"*}" ] && [ -n "${FILENAME##*"-v3"*}" ] && [ -n "${FILENAME##*"t-deck"*}" ] && [ -n "${FILENAME##*"wireless-paper"*}" ] && [ -n "${FILENAME##*"wireless-tracker"*}" ] && [ -n "${FILENAME##*"station-g2"*}" ] && [ -n "${FILENAME##*"unphone"*}" ]; then
 		if [ -n "${FILENAME##*"esp32c3"*}" ]; then
-			"$PYTHON" -m esptool write_flash 0x260000 bleota.bin
+			$ESPTOOL_CMD write_flash 0x260000 bleota.bin
 		else
-			"$PYTHON" -m esptool write_flash 0x260000 bleota-c3.bin
+			$ESPTOOL_CMD write_flash 0x260000 bleota-c3.bin
 		fi
 	else
-		"$PYTHON" -m esptool write_flash 0x260000 bleota-s3.bin
+		$ESPTOOL_CMD write_flash 0x260000 bleota-s3.bin
 	fi
-	"$PYTHON" -m esptool write_flash 0x300000 littlefs-*.bin
+	$ESPTOOL_CMD write_flash 0x300000 littlefs-*.bin
 
 else
 	show_help
diff --git a/bin/device-update.bat b/bin/device-update.bat
index 2ac649be4..a52f3d33f 100755
--- a/bin/device-update.bat
+++ b/bin/device-update.bat
@@ -2,6 +2,14 @@
 
 set PYTHON=python
 
+:: Determine the correct esptool command to use
+where esptool >nul 2>&1
+if %ERRORLEVEL% EQU 0 (
+    set "ESPTOOL_CMD=esptool"
+) else (
+    set "ESPTOOL_CMD=%PYTHON% -m esptool"
+)
+
 goto GETOPTS
 :HELP
 echo Usage: %~nx0 [-h] [-p ESPTOOL_PORT] [-P PYTHON] [-f FILENAME^|FILENAME]
@@ -24,17 +32,17 @@ IF NOT "__%1__"=="____" goto GETOPTS
 
 IF "__%FILENAME%__" == "____" (
     echo "Missing FILENAME"
-	goto HELP
+    goto HELP
 )
 IF EXIST %FILENAME% IF NOT x%FILENAME:update=%==x%FILENAME% (
     echo Trying to flash update %FILENAME%
-    %PYTHON% -m esptool --baud 115200 write_flash 0x10000 %FILENAME%
+    %ESPTOOL_CMD% --baud 115200 write_flash 0x10000 %FILENAME%
 ) else (
     echo "Invalid file: %FILENAME%"
-	goto HELP
+    goto HELP
 ) else (
     echo "Invalid file: %FILENAME%"
-	goto HELP
+    goto HELP
 )
 
 :EOF
diff --git a/bin/device-update.sh b/bin/device-update.sh
index 7233f61f6..67281dc4f 100755
--- a/bin/device-update.sh
+++ b/bin/device-update.sh
@@ -2,6 +2,18 @@
 
 PYTHON=${PYTHON:-$(which python3 python|head -n 1)}
 
+# Determine the correct esptool command to use
+if "$PYTHON" -m esptool version >/dev/null 2>&1; then
+    ESPTOOL_CMD="$PYTHON -m esptool"
+elif command -v esptool >/dev/null 2>&1; then
+    ESPTOOL_CMD="esptool"
+elif command -v esptool.py >/dev/null 2>&1; then
+    ESPTOOL_CMD="esptool.py"
+else
+    echo "Error: esptool not found"
+    exit 1
+fi
+
 # Usage info
 show_help() {
 cat << EOF
@@ -9,7 +21,7 @@ Usage: $(basename $0) [-h] [-p ESPTOOL_PORT] [-P PYTHON] [-f FILENAME|FILENAME]
 Flash image file to device, leave existing system intact."
 
     -h               Display this help and exit
-    -p ESPTOOL_PORT  Set the environment variable for ESPTOOL_PORT.  If not set, ESPTOOL iterates all ports (Dangerrous).
+    -p ESPTOOL_PORT  Set the environment variable for ESPTOOL_PORT.  If not set, ESPTOOL iterates all ports (Dangerous).
     -P PYTHON        Specify alternate python interpreter to use to invoke esptool. (Default: "$PYTHON")
     -f FILENAME      The *update.bin file to flash.  Custom to your device type.
     
@@ -30,7 +42,7 @@ while getopts ":hp:P:f:" opt; do
         f)  FILENAME=${OPTARG}
             ;;
         *)
- 	    echo "Invalid flag."
+ 	        echo "Invalid flag."
             show_help >&2
             exit 1
             ;;
@@ -45,7 +57,7 @@ shift "$((OPTIND-1))"
 
 if [ -f "${FILENAME}" ] && [ -z "${FILENAME##*"update"*}" ]; then
 	printf "Trying to flash update ${FILENAME}"
-	$PYTHON -m esptool --baud 115200 write_flash 0x10000 ${FILENAME}
+	$ESPTOOL_CMD --baud 115200 write_flash 0x10000 ${FILENAME}
 else
 	show_help
 	echo "Invalid file: ${FILENAME}"
diff --git a/protobufs b/protobufs
index 06cf134e2..834915aa0 160000
--- a/protobufs
+++ b/protobufs
@@ -1 +1 @@
-Subproject commit 06cf134e2b3d035c3ca6cbbb90b4c017d4715398
+Subproject commit 834915aa046532da0bd8478c250eb33847e9518f
diff --git a/src/FSCommon.cpp b/src/FSCommon.cpp
index 5eacead1f..6cd17dac8 100644
--- a/src/FSCommon.cpp
+++ b/src/FSCommon.cpp
@@ -329,7 +329,7 @@ void fsInit()
 {
 #ifdef FSCom
     if (!FSBegin()) {
-        LOG_ERROR("Filesystem mount Failed.");
+        LOG_ERROR("Filesystem mount failed");
         // assert(0); This auto-formats the partition, so no need to fail here.
     }
 #if defined(ARCH_ESP32)
diff --git a/src/airtime.cpp b/src/airtime.cpp
index cbd30a2d0..a7736d667 100644
--- a/src/airtime.cpp
+++ b/src/airtime.cpp
@@ -13,17 +13,17 @@ void AirTime::logAirtime(reportTypes reportType, uint32_t airtime_ms)
 {
 
     if (reportType == TX_LOG) {
-        LOG_DEBUG("Packet transmitted : %ums", airtime_ms);
+        LOG_DEBUG("Packet TX: %ums", airtime_ms);
         this->airtimes.periodTX[0] = this->airtimes.periodTX[0] + airtime_ms;
         air_period_tx[0] = air_period_tx[0] + airtime_ms;
 
         this->utilizationTX[this->getPeriodUtilHour()] = this->utilizationTX[this->getPeriodUtilHour()] + airtime_ms;
     } else if (reportType == RX_LOG) {
-        LOG_DEBUG("Packet received : %ums", airtime_ms);
+        LOG_DEBUG("Packet RX: %ums", airtime_ms);
         this->airtimes.periodRX[0] = this->airtimes.periodRX[0] + airtime_ms;
         air_period_rx[0] = air_period_rx[0] + airtime_ms;
     } else if (reportType == RX_ALL_LOG) {
-        LOG_DEBUG("Packet received (noise?) : %ums", airtime_ms);
+        LOG_DEBUG("Packet RX (noise?) : %ums", airtime_ms);
         this->airtimes.periodRX_ALL[0] = this->airtimes.periodRX_ALL[0] + airtime_ms;
     }
 
@@ -126,7 +126,7 @@ bool AirTime::isTxAllowedChannelUtil(bool polite)
     if (channelUtilizationPercent() < percentage) {
         return true;
     } else {
-        LOG_WARN("Channel utilization is >%d percent. Skip opportunity to send.", percentage);
+        LOG_WARN("Ch. util >%d%%. Skip send", percentage);
         return false;
     }
 }
@@ -137,8 +137,7 @@ bool AirTime::isTxAllowedAirUtil()
         if (utilizationTXPercent() < myRegion->dutyCycle * polite_duty_cycle_percent / 100) {
             return true;
         } else {
-            LOG_WARN("Tx air utilization is >%f percent. Skip opportunity to send.",
-                     myRegion->dutyCycle * polite_duty_cycle_percent / 100);
+            LOG_WARN("TX air util. >%f%%. Skip send", myRegion->dutyCycle * polite_duty_cycle_percent / 100);
             return false;
         }
     }
diff --git a/src/configuration.h b/src/configuration.h
index 7b64f4d1a..202c22873 100644
--- a/src/configuration.h
+++ b/src/configuration.h
@@ -153,8 +153,9 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 // ACCELEROMETER
 // -----------------------------------------------------------------------------
 #define MPU6050_ADDR 0x68
-#define STK8BXX_ADR 0x18
-#define LIS3DH_ADR 0x18
+#define STK8BXX_ADDR 0x18
+#define LIS3DH_ADDR 0x18
+#define LIS3DH_ADDR_ALT 0x19
 #define BMA423_ADDR 0x19
 #define LSM6DS3_ADDR 0x6A
 #define BMX160_ADDR 0x69
diff --git a/src/detect/ScanI2CTwoWire.cpp b/src/detect/ScanI2CTwoWire.cpp
index 8aa65a846..23db28da2 100644
--- a/src/detect/ScanI2CTwoWire.cpp
+++ b/src/detect/ScanI2CTwoWire.cpp
@@ -409,7 +409,17 @@ void ScanI2CTwoWire::scanPort(I2CPort port, uint8_t *address, uint8_t asize)
 #else
                 SCAN_SIMPLE_CASE(PMSA0031_ADDR, PMSA0031, "PMSA0031 air quality sensor found")
 #endif
-                SCAN_SIMPLE_CASE(BMA423_ADDR, BMA423, "BMA423 accelerometer found");
+            case BMA423_ADDR: // this can also be LIS3DH_ADDR_ALT
+                registerValue = getRegisterValue(ScanI2CTwoWire::RegisterLocation(addr, 0x0F), 2);
+                if (registerValue == 0x3300 || registerValue == 0x3333) { // RAK4631 WisBlock has LIS3DH register at 0x3333
+                    type = LIS3DH;
+                    LOG_INFO("LIS3DH accelerometer found");
+                } else {
+                    type = BMA423;
+                    LOG_INFO("BMA423 accelerometer found");
+                }
+                break;
+
                 SCAN_SIMPLE_CASE(LSM6DS3_ADDR, LSM6DS3, "LSM6DS3 accelerometer found at address 0x%x", (uint8_t)addr.address);
                 SCAN_SIMPLE_CASE(TCA9535_ADDR, TCA9535, "TCA9535 I2C expander found");
                 SCAN_SIMPLE_CASE(TCA9555_ADDR, TCA9555, "TCA9555 I2C expander found");
diff --git a/src/gps/GPS.cpp b/src/gps/GPS.cpp
index 662fcf2bc..099a21f82 100644
--- a/src/gps/GPS.cpp
+++ b/src/gps/GPS.cpp
@@ -794,7 +794,7 @@ void GPS::writePinEN(bool on)
     // Write and log
     enablePin->set(on);
 #ifdef GPS_DEBUG
-    LOG_DEBUG("Pin EN %s", val == HIGH ? "HI" : "LOW");
+    LOG_DEBUG("Pin EN %s", on == HIGH ? "HI" : "LOW");
 #endif
 }
 
diff --git a/src/graphics/EInkDynamicDisplay.cpp b/src/graphics/EInkDynamicDisplay.cpp
index 9a76a38c2..6664646b9 100644
--- a/src/graphics/EInkDynamicDisplay.cpp
+++ b/src/graphics/EInkDynamicDisplay.cpp
@@ -170,7 +170,7 @@ bool EInkDynamicDisplay::determineMode()
     checkFastRequested();
 
     if (refresh == UNSPECIFIED)
-        LOG_WARN("There was a flaw in the determineMode() logic.");
+        LOG_WARN("There was a flaw in the determineMode() logic");
 
     // -- Decision has been reached --
     applyRefreshMode();
diff --git a/src/graphics/Screen.cpp b/src/graphics/Screen.cpp
index b2c1be64c..039ba3657 100644
--- a/src/graphics/Screen.cpp
+++ b/src/graphics/Screen.cpp
@@ -1789,7 +1789,7 @@ int32_t Screen::runOnce()
     // serialSinceMsec adjusts for additional serial wait time during nRF52 bootup
     static bool showingBootScreen = true;
     if (showingBootScreen && (millis() > (logo_timeout + serialSinceMsec))) {
-        LOG_INFO("Done with boot screen...");
+        LOG_INFO("Done with boot screen");
         stopBootScreen();
         showingBootScreen = false;
     }
diff --git a/src/input/MPR121Keyboard.cpp b/src/input/MPR121Keyboard.cpp
index 04a424543..078d80272 100644
--- a/src/input/MPR121Keyboard.cpp
+++ b/src/input/MPR121Keyboard.cpp
@@ -116,7 +116,7 @@ void MPR121Keyboard::begin(i2c_com_fptr_t r, i2c_com_fptr_t w, uint8_t addr)
 
 void MPR121Keyboard::reset()
 {
-    LOG_DEBUG("MPR121 Reset...");
+    LOG_DEBUG("MPR121 Reset");
     // Trigger a MPR121 Soft Reset
     if (m_wire) {
         m_wire->beginTransmission(m_addr);
diff --git a/src/main.cpp b/src/main.cpp
index ad82fb2c4..0d4e9d021 100644
--- a/src/main.cpp
+++ b/src/main.cpp
@@ -451,7 +451,7 @@ void setup()
     // accessories
     auto i2cScanner = std::unique_ptr<ScanI2CTwoWire>(new ScanI2CTwoWire());
 #if HAS_WIRE
-    LOG_INFO("Scan for i2c devices...");
+    LOG_INFO("Scan for i2c devices");
 #endif
 
 #if defined(I2C_SDA1) && defined(ARCH_RP2040)
@@ -476,7 +476,7 @@ void setup()
     i2cScanner->scanPort(ScanI2C::I2CPort::WIRE);
 #elif defined(ARCH_PORTDUINO)
     if (settingsStrings[i2cdev] != "") {
-        LOG_INFO("Scan for i2c devices...");
+        LOG_INFO("Scan for i2c devices");
         i2cScanner->scanPort(ScanI2C::I2CPort::WIRE);
     }
 #elif HAS_WIRE
diff --git a/src/mesh/Default.cpp b/src/mesh/Default.cpp
index 653528b60..ba1dafe70 100644
--- a/src/mesh/Default.cpp
+++ b/src/mesh/Default.cpp
@@ -1,5 +1,6 @@
 #include "Default.h"
 #include "../userPrefs.h"
+#include "meshUtils.h"
 
 uint32_t Default::getConfiguredOrDefaultMs(uint32_t configuredInterval, uint32_t defaultInterval)
 {
@@ -40,6 +41,10 @@ uint32_t Default::getConfiguredOrDefaultMsScaled(uint32_t configured, uint32_t d
     if (config.device.role == meshtastic_Config_DeviceConfig_Role_ROUTER)
         return getConfiguredOrDefaultMs(configured, defaultValue);
 
+    // Additionally if we're a tracker or sensor, we want priority to send position and telemetry
+    if (IS_ONE_OF(config.device.role, meshtastic_Config_DeviceConfig_Role_SENSOR, meshtastic_Config_DeviceConfig_Role_TRACKER))
+        return getConfiguredOrDefaultMs(configured, defaultValue);
+
     return getConfiguredOrDefaultMs(configured, defaultValue) * congestionScalingCoefficient(numOnlineNodes);
 }
 
diff --git a/src/mesh/Default.h b/src/mesh/Default.h
index 2406dafc5..7a7507c84 100644
--- a/src/mesh/Default.h
+++ b/src/mesh/Default.h
@@ -1,6 +1,7 @@
 #pragma once
 #include <NodeDB.h>
 #include <cstdint>
+#include <meshUtils.h>
 #define ONE_DAY 24 * 60 * 60
 #define ONE_MINUTE_MS 60 * 1000
 #define THIRTY_SECONDS_MS 30 * 1000
@@ -41,12 +42,30 @@ class Default
   private:
     static float congestionScalingCoefficient(int numOnlineNodes)
     {
-        if (numOnlineNodes <= 40) {
-            return 1.0; // No scaling for 40 or fewer nodes
+        // Increase frequency of broadcasts for small networks regardless of preset
+        if (numOnlineNodes <= 10) {
+            return 0.6;
+        } else if (numOnlineNodes <= 20) {
+            return 0.7;
+        } else if (numOnlineNodes <= 30) {
+            return 0.8;
+        } else if (numOnlineNodes <= 40) {
+            return 1.0;
         } else {
-            // Sscaling based on number of nodes over 40
+            float throttlingFactor = 0.075;
+            if (config.lora.use_preset && config.lora.modem_preset == meshtastic_Config_LoRaConfig_ModemPreset_MEDIUM_SLOW)
+                throttlingFactor = 0.04;
+            else if (config.lora.use_preset && config.lora.modem_preset == meshtastic_Config_LoRaConfig_ModemPreset_MEDIUM_FAST)
+                throttlingFactor = 0.02;
+            else if (config.lora.use_preset && config.lora.modem_preset == meshtastic_Config_LoRaConfig_ModemPreset_SHORT_SLOW)
+                throttlingFactor = 0.01;
+            else if (config.lora.use_preset &&
+                     IS_ONE_OF(config.lora.modem_preset, meshtastic_Config_LoRaConfig_ModemPreset_SHORT_FAST,
+                               meshtastic_Config_LoRaConfig_ModemPreset_SHORT_TURBO))
+                return 1.0; // Don't bother throttling for highest bandwidth presets
+            // Scaling up traffic based on number of nodes over 40
             int nodesOverForty = (numOnlineNodes - 40);
-            return 1.0 + (nodesOverForty * 0.075); // Each number of online node scales by 0.075
+            return 1.0 + (nodesOverForty * throttlingFactor); // Each number of online node scales by 0.075 (default)
         }
     }
 };
\ No newline at end of file
diff --git a/src/mesh/NodeDB.cpp b/src/mesh/NodeDB.cpp
index ddc701c31..fe60d5e18 100644
--- a/src/mesh/NodeDB.cpp
+++ b/src/mesh/NodeDB.cpp
@@ -655,7 +655,7 @@ void NodeDB::removeNodeByNum(NodeNum nodeNum)
     numMeshNodes -= removed;
     std::fill(devicestate.node_db_lite.begin() + numMeshNodes, devicestate.node_db_lite.begin() + numMeshNodes + 1,
               meshtastic_NodeInfoLite());
-    LOG_DEBUG("NodeDB::removeNodeByNum purged %d entries. Save changes...", removed);
+    LOG_DEBUG("NodeDB::removeNodeByNum purged %d entries. Save changes", removed);
     saveDeviceStateToDisk();
 }
 
@@ -991,7 +991,7 @@ bool NodeDB::saveToDisk(int saveWhat)
     bool success = saveToDiskNoRetry(saveWhat);
 
     if (!success) {
-        LOG_ERROR("Failed to save to disk, retrying...");
+        LOG_ERROR("Failed to save to disk, retrying");
 #ifdef ARCH_NRF52 // @geeksville is not ready yet to say we should do this on other platforms.  See bug #4184 discussion
         FSCom.format();
 
@@ -1167,7 +1167,7 @@ bool NodeDB::updateUser(uint32_t nodeId, meshtastic_User &p, uint8_t channelInde
         // We just changed something about the user, store our DB
         Throttle::execute(
             &lastNodeDbSave, ONE_MINUTE_MS, []() { nodeDB->saveToDisk(SEGMENT_DEVICESTATE); },
-            []() { LOG_DEBUG("Deferring NodeDB saveToDisk for now"); }); // since we saved less than a minute ago
+            []() { LOG_DEBUG("Defer NodeDB saveToDisk for now"); }); // since we saved less than a minute ago
     }
 
     return changed;
@@ -1297,7 +1297,7 @@ void recordCriticalError(meshtastic_CriticalErrorCode code, uint32_t address, co
 
     // Currently portuino is mostly used for simulation.  Make sure the user notices something really bad happened
 #ifdef ARCH_PORTDUINO
-    LOG_ERROR("A critical failure occurred, portduino is exiting...");
+    LOG_ERROR("A critical failure occurred, portduino is exiting");
     exit(2);
 #endif
 }
\ No newline at end of file
diff --git a/src/mesh/RF95Interface.cpp b/src/mesh/RF95Interface.cpp
index db56659bd..9ef045099 100644
--- a/src/mesh/RF95Interface.cpp
+++ b/src/mesh/RF95Interface.cpp
@@ -230,7 +230,7 @@ bool RF95Interface::reconfigure()
 
     err = lora->setPreambleLength(preambleLength);
     if (err != RADIOLIB_ERR_NONE)
-        LOG_ERROR(" RF95 setPreambleLength %s%d", radioLibErr, err);
+        LOG_ERROR("RF95 setPreambleLength %s%d", radioLibErr, err);
     assert(err == RADIOLIB_ERR_NONE);
 
     err = lora->setFrequency(getFreq());
diff --git a/src/mesh/Router.cpp b/src/mesh/Router.cpp
index 5eb2a5f50..ca9600cab 100644
--- a/src/mesh/Router.cpp
+++ b/src/mesh/Router.cpp
@@ -489,7 +489,8 @@ meshtastic_Routing_Error perhapsEncode(meshtastic_MeshPacket *p)
         meshtastic_NodeInfoLite *node = nodeDB->getMeshNode(p->to);
         // We may want to retool things so we can send a PKC packet when the client specifies a key and nodenum, even if the node
         // is not in the local nodedb
-        if (
+        // First, only PKC encrypt packets we are originating
+        if (isFromUs(p) &&
             // Don't use PKC with Ham mode
             !owner.is_licensed &&
             // Don't use PKC if it's not explicitly requested and a non-primary channel is requested
@@ -671,4 +672,4 @@ void Router::perhapsHandleReceived(meshtastic_MeshPacket *p)
     // cache/learn of the existence of nodes (i.e. FloodRouter) that they should not
     handleReceived(p);
     packetPool.release(p);
-}
+}
\ No newline at end of file
diff --git a/src/mesh/SX128xInterface.cpp b/src/mesh/SX128xInterface.cpp
index 9fe1f645f..013164bca 100644
--- a/src/mesh/SX128xInterface.cpp
+++ b/src/mesh/SX128xInterface.cpp
@@ -71,7 +71,7 @@ template <typename T> bool SX128xInterface<T>::init()
     LOG_INFO("SX128x init result %d", res);
 
     if ((config.lora.region != meshtastic_Config_LoRaConfig_RegionCode_LORA_24) && (res == RADIOLIB_ERR_INVALID_FREQUENCY)) {
-        LOG_WARN("Radio chip only supports 2.4GHz LoRa. Adjusting Region and rebooting.");
+        LOG_WARN("Radio only supports 2.4GHz LoRa. Adjusting Region and rebooting");
         config.lora.region = meshtastic_Config_LoRaConfig_RegionCode_LORA_24;
         nodeDB->saveToDisk(SEGMENT_CONFIG);
         delay(2000);
@@ -80,7 +80,7 @@ template <typename T> bool SX128xInterface<T>::init()
 #elif defined(ARCH_NRF52)
         NVIC_SystemReset();
 #else
-        LOG_ERROR("FIXME implement reboot for this platform. Skip for now.");
+        LOG_ERROR("FIXME implement reboot for this platform. Skip for now");
 #endif
     }
 
diff --git a/src/mesh/StreamAPI.h b/src/mesh/StreamAPI.h
index 45cbb231c..6e0364bc1 100644
--- a/src/mesh/StreamAPI.h
+++ b/src/mesh/StreamAPI.h
@@ -3,6 +3,7 @@
 #include "PhoneAPI.h"
 #include "Stream.h"
 #include "concurrency/OSThread.h"
+#include <cstdarg>
 
 // A To/FromRadio packet + our 32 bit header
 #define MAX_STREAM_BUF_SIZE (MAX_TO_FROM_RADIO_SIZE + sizeof(uint32_t))
diff --git a/src/mesh/eth/ethClient.cpp b/src/mesh/eth/ethClient.cpp
index c275d9c06..3b4d716f5 100644
--- a/src/mesh/eth/ethClient.cpp
+++ b/src/mesh/eth/ethClient.cpp
@@ -141,13 +141,13 @@ bool initEthernet()
 
         if (status == 0) {
             if (Ethernet.hardwareStatus() == EthernetNoHardware) {
-                LOG_ERROR("Ethernet shield was not found.");
+                LOG_ERROR("Ethernet shield was not found");
                 return false;
             } else if (Ethernet.linkStatus() == LinkOFF) {
-                LOG_ERROR("Ethernet cable is not connected.");
+                LOG_ERROR("Ethernet cable is not connected");
                 return false;
             } else {
-                LOG_ERROR("Unknown Ethernet error.");
+                LOG_ERROR("Unknown Ethernet error");
                 return false;
             }
         } else {
diff --git a/src/mesh/generated/meshtastic/deviceonly.pb.h b/src/mesh/generated/meshtastic/deviceonly.pb.h
index a90e72244..39d056061 100644
--- a/src/mesh/generated/meshtastic/deviceonly.pb.h
+++ b/src/mesh/generated/meshtastic/deviceonly.pb.h
@@ -81,7 +81,7 @@ typedef struct _meshtastic_NodeInfoLite {
     uint8_t channel;
     /* True if we witnessed the node over MQTT instead of LoRA transport */
     bool via_mqtt;
-    /* Number of hops away from us this node is (0 if adjacent) */
+    /* Number of hops away from us this node is (0 if direct neighbor) */
     bool has_hops_away;
     uint8_t hops_away;
     /* True if node is in our favorites list
diff --git a/src/mesh/generated/meshtastic/localonly.pb.h b/src/mesh/generated/meshtastic/localonly.pb.h
index 6409aef74..8f92b2a77 100644
--- a/src/mesh/generated/meshtastic/localonly.pb.h
+++ b/src/mesh/generated/meshtastic/localonly.pb.h
@@ -188,7 +188,7 @@ extern const pb_msgdesc_t meshtastic_LocalModuleConfig_msg;
 /* Maximum encoded size of messages (where known) */
 #define MESHTASTIC_MESHTASTIC_LOCALONLY_PB_H_MAX_SIZE meshtastic_LocalConfig_size
 #define meshtastic_LocalConfig_size              735
-#define meshtastic_LocalModuleConfig_size        697
+#define meshtastic_LocalModuleConfig_size        699
 
 #ifdef __cplusplus
 } /* extern "C" */
diff --git a/src/mesh/generated/meshtastic/mesh.pb.h b/src/mesh/generated/meshtastic/mesh.pb.h
index 8b49d3195..e45d60a19 100644
--- a/src/mesh/generated/meshtastic/mesh.pb.h
+++ b/src/mesh/generated/meshtastic/mesh.pb.h
@@ -720,7 +720,7 @@ typedef struct _meshtastic_MeshPacket {
  Set during reception to indicate the SNR of this packet.
  Used to collect statistics on current link quality. */
     float rx_snr;
-    /* If unset treated as zero (no forwarding, send to adjacent nodes only)
+    /* If unset treated as zero (no forwarding, send to direct neighbor nodes only)
  if 1, allow hopping through one node, etc...
  For our usecase real world topologies probably have a max of about 3.
  This field is normally placed into a few of bits in the header. */
@@ -791,7 +791,7 @@ typedef struct _meshtastic_NodeInfo {
     uint8_t channel;
     /* True if we witnessed the node over MQTT instead of LoRA transport */
     bool via_mqtt;
-    /* Number of hops away from us this node is (0 if adjacent) */
+    /* Number of hops away from us this node is (0 if direct neighbor) */
     bool has_hops_away;
     uint8_t hops_away;
     /* True if node is in our favorites list
diff --git a/src/mesh/generated/meshtastic/module_config.pb.h b/src/mesh/generated/meshtastic/module_config.pb.h
index 32d5ded23..8f7bb701d 100644
--- a/src/mesh/generated/meshtastic/module_config.pb.h
+++ b/src/mesh/generated/meshtastic/module_config.pb.h
@@ -153,8 +153,11 @@ typedef struct _meshtastic_ModuleConfig_NeighborInfoConfig {
     /* Whether the Module is enabled */
     bool enabled;
     /* Interval in seconds of how often we should try to send our
- Neighbor Info to the mesh */
+ Neighbor Info (minimum is 14400, i.e., 4 hours) */
     uint32_t update_interval;
+    /* Whether in addition to sending it to MQTT and the PhoneAPI, our NeighborInfo should be transmitted over LoRa.
+ Note that this is not available on a channel with default key and name. */
+    bool transmit_over_lora;
 } meshtastic_ModuleConfig_NeighborInfoConfig;
 
 /* Detection Sensor Module Config */
@@ -501,7 +504,7 @@ extern "C" {
 #define meshtastic_ModuleConfig_MQTTConfig_init_default {0, "", "", "", 0, 0, 0, "", 0, 0, false, meshtastic_ModuleConfig_MapReportSettings_init_default}
 #define meshtastic_ModuleConfig_MapReportSettings_init_default {0, 0}
 #define meshtastic_ModuleConfig_RemoteHardwareConfig_init_default {0, 0, 0, {meshtastic_RemoteHardwarePin_init_default, meshtastic_RemoteHardwarePin_init_default, meshtastic_RemoteHardwarePin_init_default, meshtastic_RemoteHardwarePin_init_default}}
-#define meshtastic_ModuleConfig_NeighborInfoConfig_init_default {0, 0}
+#define meshtastic_ModuleConfig_NeighborInfoConfig_init_default {0, 0, 0}
 #define meshtastic_ModuleConfig_DetectionSensorConfig_init_default {0, 0, 0, 0, "", 0, _meshtastic_ModuleConfig_DetectionSensorConfig_TriggerType_MIN, 0}
 #define meshtastic_ModuleConfig_AudioConfig_init_default {0, 0, _meshtastic_ModuleConfig_AudioConfig_Audio_Baud_MIN, 0, 0, 0, 0}
 #define meshtastic_ModuleConfig_PaxcounterConfig_init_default {0, 0, 0, 0}
@@ -517,7 +520,7 @@ extern "C" {
 #define meshtastic_ModuleConfig_MQTTConfig_init_zero {0, "", "", "", 0, 0, 0, "", 0, 0, false, meshtastic_ModuleConfig_MapReportSettings_init_zero}
 #define meshtastic_ModuleConfig_MapReportSettings_init_zero {0, 0}
 #define meshtastic_ModuleConfig_RemoteHardwareConfig_init_zero {0, 0, 0, {meshtastic_RemoteHardwarePin_init_zero, meshtastic_RemoteHardwarePin_init_zero, meshtastic_RemoteHardwarePin_init_zero, meshtastic_RemoteHardwarePin_init_zero}}
-#define meshtastic_ModuleConfig_NeighborInfoConfig_init_zero {0, 0}
+#define meshtastic_ModuleConfig_NeighborInfoConfig_init_zero {0, 0, 0}
 #define meshtastic_ModuleConfig_DetectionSensorConfig_init_zero {0, 0, 0, 0, "", 0, _meshtastic_ModuleConfig_DetectionSensorConfig_TriggerType_MIN, 0}
 #define meshtastic_ModuleConfig_AudioConfig_init_zero {0, 0, _meshtastic_ModuleConfig_AudioConfig_Audio_Baud_MIN, 0, 0, 0, 0}
 #define meshtastic_ModuleConfig_PaxcounterConfig_init_zero {0, 0, 0, 0}
@@ -546,6 +549,7 @@ extern "C" {
 #define meshtastic_ModuleConfig_MQTTConfig_map_report_settings_tag 11
 #define meshtastic_ModuleConfig_NeighborInfoConfig_enabled_tag 1
 #define meshtastic_ModuleConfig_NeighborInfoConfig_update_interval_tag 2
+#define meshtastic_ModuleConfig_NeighborInfoConfig_transmit_over_lora_tag 3
 #define meshtastic_ModuleConfig_DetectionSensorConfig_enabled_tag 1
 #define meshtastic_ModuleConfig_DetectionSensorConfig_minimum_broadcast_secs_tag 2
 #define meshtastic_ModuleConfig_DetectionSensorConfig_state_broadcast_secs_tag 3
@@ -709,7 +713,8 @@ X(a, STATIC,   REPEATED, MESSAGE,  available_pins,    3)
 
 #define meshtastic_ModuleConfig_NeighborInfoConfig_FIELDLIST(X, a) \
 X(a, STATIC,   SINGULAR, BOOL,     enabled,           1) \
-X(a, STATIC,   SINGULAR, UINT32,   update_interval,   2)
+X(a, STATIC,   SINGULAR, UINT32,   update_interval,   2) \
+X(a, STATIC,   SINGULAR, BOOL,     transmit_over_lora,   3)
 #define meshtastic_ModuleConfig_NeighborInfoConfig_CALLBACK NULL
 #define meshtastic_ModuleConfig_NeighborInfoConfig_DEFAULT NULL
 
@@ -884,7 +889,7 @@ extern const pb_msgdesc_t meshtastic_RemoteHardwarePin_msg;
 #define meshtastic_ModuleConfig_ExternalNotificationConfig_size 42
 #define meshtastic_ModuleConfig_MQTTConfig_size  254
 #define meshtastic_ModuleConfig_MapReportSettings_size 12
-#define meshtastic_ModuleConfig_NeighborInfoConfig_size 8
+#define meshtastic_ModuleConfig_NeighborInfoConfig_size 10
 #define meshtastic_ModuleConfig_PaxcounterConfig_size 30
 #define meshtastic_ModuleConfig_RangeTestConfig_size 10
 #define meshtastic_ModuleConfig_RemoteHardwareConfig_size 96
diff --git a/src/mesh/http/ContentHandler.cpp b/src/mesh/http/ContentHandler.cpp
index 0fdfaabb9..efa816438 100644
--- a/src/mesh/http/ContentHandler.cpp
+++ b/src/mesh/http/ContentHandler.cpp
@@ -441,8 +441,8 @@ void handleStatic(HTTPRequest *req, HTTPResponse *res)
 
         return;
     } else {
-        LOG_ERROR("This should not have happened...");
-        res->println("ERROR: This should not have happened...");
+        LOG_ERROR("This should not have happened");
+        res->println("ERROR: This should not have happened");
     }
 }
 
diff --git a/src/mesh/http/WebServer.cpp b/src/mesh/http/WebServer.cpp
index 20a200624..d9856e157 100644
--- a/src/mesh/http/WebServer.cpp
+++ b/src/mesh/http/WebServer.cpp
@@ -95,7 +95,7 @@ static void taskCreateCert(void *parameter)
         LOG_DEBUG("Retrieved Certificate: %d Bytes", cert->getCertLength());
     } else {
 
-        LOG_INFO("Creating the certificate. This may take a while. Please wait...");
+        LOG_INFO("Creating the certificate. This may take a while. Please wait");
         yield();
         cert = new SSLCert();
         yield();
@@ -189,7 +189,7 @@ int32_t WebServerThread::runOnce()
 
 void initWebServer()
 {
-    LOG_DEBUG("Init Web Server...");
+    LOG_DEBUG("Init Web Server");
 
     // We can now use the new certificate to setup our server as usual.
     secureServer = new HTTPSServer(cert);
@@ -198,10 +198,10 @@ void initWebServer()
     registerHandlers(insecureServer, secureServer);
 
     if (secureServer) {
-        LOG_INFO("Start Secure Web Server...");
+        LOG_INFO("Start Secure Web Server");
         secureServer->start();
     }
-    LOG_INFO("Start Insecure Web Server...");
+    LOG_INFO("Start Insecure Web Server");
     insecureServer->start();
     if (insecureServer->isRunning()) {
         LOG_INFO("Web Servers Ready! :-) ");
diff --git a/src/modules/AdminModule.cpp b/src/modules/AdminModule.cpp
index 7677eaf18..511099d42 100644
--- a/src/modules/AdminModule.cpp
+++ b/src/modules/AdminModule.cpp
@@ -381,7 +381,7 @@ void AdminModule::handleGetModuleConfigResponse(const meshtastic_MeshPacket &mp,
     // Skip if it's disabled or no pins are exposed
     if (!r->get_module_config_response.payload_variant.remote_hardware.enabled ||
         r->get_module_config_response.payload_variant.remote_hardware.available_pins_count == 0) {
-        LOG_DEBUG("Remote hardware module disabled or no available_pins. Skip...");
+        LOG_DEBUG("Remote hardware module disabled or no available_pins. Skip");
         return;
     }
     for (uint8_t i = 0; i < devicestate.node_remote_hardware_pins_count; i++) {
diff --git a/src/modules/DetectionSensorModule.cpp b/src/modules/DetectionSensorModule.cpp
index 0b9e74f32..cb27cbd48 100644
--- a/src/modules/DetectionSensorModule.cpp
+++ b/src/modules/DetectionSensorModule.cpp
@@ -76,7 +76,7 @@ int32_t DetectionSensorModule::runOnce()
         if (moduleConfig.detection_sensor.monitor_pin > 0) {
             pinMode(moduleConfig.detection_sensor.monitor_pin, moduleConfig.detection_sensor.use_pullup ? INPUT_PULLUP : INPUT);
         } else {
-            LOG_WARN("Detection Sensor Module: Set to enabled but no monitor pin is set. Disable module...");
+            LOG_WARN("Detection Sensor Module: Set to enabled but no monitor pin is set. Disable module");
             return disable();
         }
         LOG_INFO("Detection Sensor Module: init");
diff --git a/src/modules/NodeInfoModule.cpp b/src/modules/NodeInfoModule.cpp
index 680ef0890..b55d47d5b 100644
--- a/src/modules/NodeInfoModule.cpp
+++ b/src/modules/NodeInfoModule.cpp
@@ -70,11 +70,11 @@ meshtastic_MeshPacket *NodeInfoModule::allocReply()
     }
     // If we sent our NodeInfo less than 5 min. ago, don't send it again as it may be still underway.
     if (!shorterTimeout && lastSentToMesh && Throttle::isWithinTimespanMs(lastSentToMesh, 5 * 60 * 1000)) {
-        LOG_DEBUG("Skip send NodeInfo since we sent it <5 mins ago.");
+        LOG_DEBUG("Skip send NodeInfo since we sent it <5min ago");
         ignoreRequest = true; // Mark it as ignored for MeshModule
         return NULL;
     } else if (shorterTimeout && lastSentToMesh && Throttle::isWithinTimespanMs(lastSentToMesh, 60 * 1000)) {
-        LOG_DEBUG("Skip send requested NodeInfo since we sent it <60s ago.");
+        LOG_DEBUG("Skip send NodeInfo since we sent it <60s ago");
         ignoreRequest = true; // Mark it as ignored for MeshModule
         return NULL;
     } else {
diff --git a/src/modules/PositionModule.cpp b/src/modules/PositionModule.cpp
index 1baa550c0..f80d3eb67 100644
--- a/src/modules/PositionModule.cpp
+++ b/src/modules/PositionModule.cpp
@@ -16,10 +16,7 @@
 #include "meshtastic/atak.pb.h"
 #include "sleep.h"
 #include "target_specific.h"
-
-extern "C" {
 #include <Throttle.h>
-}
 
 PositionModule *positionModule;
 
@@ -249,8 +246,11 @@ meshtastic_MeshPacket *PositionModule::allocReply()
     // nodes shouldn't trust it anyways) Note: we allow a device with a local GPS or NTP to include the time, so that devices
     // without can get time.
     if (getRTCQuality() < RTCQualityNTP) {
-        LOG_INFO("Strip time %u from position send", p.time);
+        LOG_INFO("Strip time %u from position", p.time);
         p.time = 0;
+    } else if (rtc_found.address != ScanI2C::ADDRESS_NONE.address) {
+        LOG_INFO("Use RTC time %u for position", p.time);
+        p.time = getValidTime(RTCQualityDevice);
     } else {
         p.time = getValidTime(RTCQualityNTP);
         LOG_INFO("Provide time to mesh %u", p.time);
diff --git a/src/modules/Telemetry/EnvironmentTelemetry.cpp b/src/modules/Telemetry/EnvironmentTelemetry.cpp
index 64e936e29..c18944ebd 100644
--- a/src/modules/Telemetry/EnvironmentTelemetry.cpp
+++ b/src/modules/Telemetry/EnvironmentTelemetry.cpp
@@ -376,12 +376,14 @@ bool EnvironmentTelemetryModule::getEnvironmentTelemetry(meshtastic_Telemetry *m
             LOG_INFO("AHTX0+BMP280 module detected: using temp from BMP280 and humy from AHTX0");
             aht10Sensor.getMetrics(&m_ahtx);
             m->variant.environment_metrics.relative_humidity = m_ahtx.variant.environment_metrics.relative_humidity;
+            m->variant.environment_metrics.has_relative_humidity = m_ahtx.variant.environment_metrics.has_relative_humidity;
         } else {
             // prefer bmp3xx temp if both sensors are present, fetch only humidity
             meshtastic_Telemetry m_ahtx = meshtastic_Telemetry_init_zero;
             LOG_INFO("AHTX0+BMP3XX module detected: using temp from BMP3XX and humy from AHTX0");
             aht10Sensor.getMetrics(&m_ahtx);
             m->variant.environment_metrics.relative_humidity = m_ahtx.variant.environment_metrics.relative_humidity;
+            m->variant.environment_metrics.has_relative_humidity = m_ahtx.variant.environment_metrics.has_relative_humidity;
         }
     }
     if (max17048Sensor.hasSensor()) {
diff --git a/src/modules/Telemetry/Sensor/TelemetrySensor.h b/src/modules/Telemetry/Sensor/TelemetrySensor.h
index 0e38949d3..08cc1125d 100644
--- a/src/modules/Telemetry/Sensor/TelemetrySensor.h
+++ b/src/modules/Telemetry/Sensor/TelemetrySensor.h
@@ -31,7 +31,7 @@ class TelemetrySensor
     int32_t initI2CSensor()
     {
         if (!status) {
-            LOG_WARN("Could not connect to detected %s sensor. Remove from nodeTelemetrySensorsMap.", sensorName);
+            LOG_WARN("Can't connect to detected %s sensor. Remove from nodeTelemetrySensorsMap", sensorName);
             nodeTelemetrySensorsMap[sensorType].first = 0;
         } else {
             LOG_INFO("Opened %s sensor on i2c bus", sensorName);
diff --git a/src/shutdown.h b/src/shutdown.h
index ad44045e5..9e30e772c 100644
--- a/src/shutdown.h
+++ b/src/shutdown.h
@@ -32,7 +32,7 @@ void powerCommandsCheck()
         reboot();
 #else
         rebootAtMsec = -1;
-        LOG_WARN("FIXME implement reboot for this platform. Note that some settings require a restart to be applied.");
+        LOG_WARN("FIXME implement reboot for this platform. Note that some settings require a restart to be applied");
 #endif
     }
 
diff --git a/variants/portduino/platformio.ini b/variants/portduino/platformio.ini
index fa4731ec8..fcf687461 100644
--- a/variants/portduino/platformio.ini
+++ b/variants/portduino/platformio.ini
@@ -2,7 +2,8 @@
 extends = portduino_base
 ; The pkg-config commands below optionally add link flags.
 ; the || : is just a "or run the null command" to avoid returning an error code
-build_flags = ${portduino_base.build_flags} -O0 -I variants/portduino -I /usr/include
+build_flags = ${portduino_base.build_flags} -O0 -I variants/portduino
+  -I /usr/include
   !pkg-config --libs libulfius --silence-errors || :
   !pkg-config --libs openssl --silence-errors || :
 board = cross_platform
diff --git a/version.properties b/version.properties
index 6664f69b9..91c1f4823 100644
--- a/version.properties
+++ b/version.properties
@@ -1,4 +1,4 @@
 [VERSION]  
 major = 2
 minor = 5
-build = 11
+build = 12