pohui_pohui/firmware
1
0
Fork 0
mirror of https://github.com/meshtastic/firmware.git synced 2025-02-26 22:33:24 +00:00
Code Issues Actions4 Packages Projects Releases Wiki Activity

Trunk variants

Browse Source
This commit is contained in:
Ben Meadors 2024-05-31 11:18:06 -05:00
parent eddda3ca43
commit 4fa2427b8c
4 changed files with 10 additions and 9 deletions
variants
heltec_v3
variant.h
heltec_wireless_tracker
variant.h
heltec_wireless_tracker_V1_0
variant.h
heltec_wsl_v3
variant.h

2
variants/heltec_v3/variant.h
View File

@ -16,7 +16,7 @@
#define BATTERY_PIN 1 // A battery voltage measurement pin, voltage divider connected here to measure battery voltage
#define ADC_CHANNEL ADC1_GPIO1_CHANNEL
#define ADC_ATTENUATION ADC_ATTEN_DB_2_5 // lower dB for high resistance voltage divider
#define ADC_MULTIPLIER 4.9*1.045
#define ADC_MULTIPLIER 4.9 * 1.045
#define USE_SX1262

13
variants/heltec_wireless_tracker/variant.h
View File

@ -27,17 +27,17 @@
#define SCREEN_TRANSITION_FRAMERATE 3 // fps
#define DISPLAY_FORCE_SMALL_FONTS
// pin 3 is Vext on v1.1 - HIGH enables LDO for Vext rail which goes to:
// GPS UC6580: GPS V_DET(8), VDD_IO(7), DCDC_IN(21), pulls up RESETN(17), D_SEL(33) and BOOT_MODE(34) through 10kR
// GPS LNA SW7125DE: VCC(4), pulls up SHDN(5) through 10kR
// LED: VDD, LEDA (through diode)
// pin 3 is Vext on v1.1 - HIGH enables LDO for Vext rail which goes to:
// GPS UC6580: GPS V_DET(8), VDD_IO(7), DCDC_IN(21), pulls up RESETN(17), D_SEL(33) and BOOT_MODE(34) through 10kR
// GPS LNA SW7125DE: VCC(4), pulls up SHDN(5) through 10kR
// LED: VDD, LEDA (through diode)
#define VEXT_ENABLE_V05 3 // active HIGH - powers the GPS, GPS LNA and OLED VDD/anode
#define BUTTON_PIN 0
#define BATTERY_PIN 1 // A battery voltage measurement pin, voltage divider connected here to measure battery voltage
#define ADC_CHANNEL ADC1_GPIO1_CHANNEL
#define ADC_ATTENUATION ADC_ATTEN_DB_2_5 // lower dB for high resistance voltage divider
#define ADC_MULTIPLIER 4.9*1.045
#define ADC_MULTIPLIER 4.9 * 1.045
#define ADC_CTRL 2 // active HIGH, powers the voltage divider. Only on 1.1
#define ADC_CTRL_ENABLED HIGH
@ -47,7 +47,8 @@
#define GPS_TX_PIN 34
#define PIN_GPS_RESET 35
#define PIN_GPS_PPS 36
// #define PIN_GPS_EN 3 // Uncomment to power off the GPS with triple-click on Tracker v1.1, though we'll also lose the display.
// #define PIN_GPS_EN 3 // Uncomment to power off the GPS with triple-click on Tracker v1.1, though we'll also lose the
// display.
#define GPS_RESET_MODE LOW
#define GPS_UC6580

2
variants/heltec_wireless_tracker_V1_0/variant.h
View File

@ -34,7 +34,7 @@
#define BATTERY_PIN 1 // A battery voltage measurement pin, voltage divider connected here to measure battery voltage
#define ADC_CHANNEL ADC1_GPIO1_CHANNEL
#define ADC_ATTENUATION ADC_ATTEN_DB_2_5 // lower dB for high resistance voltage divider
#define ADC_MULTIPLIER 4.9*1.045
#define ADC_MULTIPLIER 4.9 * 1.045
#undef GPS_RX_PIN
#undef GPS_TX_PIN

2
variants/heltec_wsl_v3/variant.h
View File

@ -11,7 +11,7 @@
#define BATTERY_PIN 1 // A battery voltage measurement pin, voltage divider connected here to measure battery voltage
#define ADC_CHANNEL ADC1_GPIO1_CHANNEL
#define ADC_ATTENUATION ADC_ATTEN_DB_2_5 // lower dB for high resistance voltage divider
#define ADC_MULTIPLIER 4.9*1.045
#define ADC_MULTIPLIER 4.9 * 1.045
#define USE_SX1262