mirror of
https://github.com/meshtastic/firmware.git
synced 2025-08-23 13:38:01 +00:00
[WIP] Crowpanel support
This commit is contained in:
Thomas Göttgens
parent
72db671e00
commit
557ab17333
43
boards/crowpanel.json
Normal file
43
boards/crowpanel.json
Normal file
@ -0,0 +1,43 @@
|
||||
{
|
||||
"build": {
|
||||
"arduino": {
|
||||
"ldscript": "esp32s3_out.ld",
|
||||
"memory_type": "qio_opi",
|
||||
"partitions": "default_16MB.csv"
|
||||
},
|
||||
"core": "esp32",
|
||||
"extra_flags": [
|
||||
"-DBOARD_HAS_PSRAM",
|
||||
"-DARDUINO_USB_CDC_ON_BOOT=0",
|
||||
"-DARDUINO_USB_MODE=1",
|
||||
"-DARDUINO_RUNNING_CORE=1",
|
||||
"-DARDUINO_EVENT_RUNNING_CORE=0"
|
||||
],
|
||||
"f_cpu": "240000000L",
|
||||
"f_flash": "80000000L",
|
||||
"flash_mode": "qio",
|
||||
"hwids": [["0x303A", "0x1001"]],
|
||||
"mcu": "esp32s3",
|
||||
"variant": "ESP32-S3-WROOM-1-N16R8"
|
||||
},
|
||||
"connectivity": ["wifi", "bluetooth", "lora"],
|
||||
"debug": {
|
||||
"default_tool": "esp-builtin",
|
||||
"onboard_tools": ["esp-builtin"],
|
||||
"openocd_target": "esp32s3.cfg"
|
||||
},
|
||||
"frameworks": ["arduino", "espidf"],
|
||||
"name": "ESP32-S3-WROOM-1-N16R8 (16 MB Flash, 8 MB PSRAM)",
|
||||
"upload": {
|
||||
"flash_size": "16MB",
|
||||
"maximum_ram_size": 524288,
|
||||
"maximum_size": 16777216,
|
||||
"require_upload_port": true,
|
||||
"speed": 921600
|
||||
},
|
||||
"monitor": {
|
||||
"speed": 115200
|
||||
},
|
||||
"url": "https://www.espressif.com/sites/default/files/documentation/esp32-s3-wroom-1_wroom-1u_datasheet_en.pdf",
|
||||
"vendor": "Espressif"
|
||||
}
|
||||
@ -1103,7 +1103,7 @@ static void drawNodes(OLEDDisplay *display, int16_t x, int16_t y, const NodeStat
|
||||
char usersString[20];
|
||||
snprintf(usersString, sizeof(usersString), "%d/%d", nodeStatus->getNumOnline(), nodeStatus->getNumTotal());
|
||||
#if (defined(USE_EINK) || defined(ILI9341_DRIVER) || defined(ILI9342_DRIVER) || defined(ST7701_CS) || defined(ST7735_CS) || \
|
||||
defined(ST7789_CS) || defined(USE_ST7789) || defined(HX8357_CS)) && \
|
||||
defined(ST7789_CS) || defined(USE_ST7789) || defined(ILI9488_CS) || defined(HX8357_CS)) && \
|
||||
!defined(DISPLAY_FORCE_SMALL_FONTS)
|
||||
display->drawFastImage(x, y + 3, 8, 8, imgUser);
|
||||
#else
|
||||
@ -1544,7 +1544,7 @@ Screen::Screen(ScanI2C::DeviceAddress address, meshtastic_Config_DisplayConfig_O
|
||||
dispdev = new SSD1306Wire(address.address, -1, -1, geometry,
|
||||
(address.port == ScanI2C::I2CPort::WIRE1) ? HW_I2C::I2C_TWO : HW_I2C::I2C_ONE);
|
||||
#elif defined(ST7735_CS) || defined(ILI9341_DRIVER) || defined(ILI9342_DRIVER) || defined(ST7701_CS) || defined(ST7789_CS) || \
|
||||
defined(RAK14014) || defined(HX8357_CS)
|
||||
defined(RAK14014) || defined(HX8357_CS) || defined(ILI9488_CS)
|
||||
dispdev = new TFTDisplay(address.address, -1, -1, geometry,
|
||||
(address.port == ScanI2C::I2CPort::WIRE1) ? HW_I2C::I2C_TWO : HW_I2C::I2C_ONE);
|
||||
#elif defined(USE_EINK) && !defined(USE_EINK_DYNAMICDISPLAY)
|
||||
@ -1748,7 +1748,7 @@ void Screen::setup()
|
||||
// flip it. If you have a headache now, you're welcome.
|
||||
if (!config.display.flip_screen) {
|
||||
#if defined(ST7701_CS) || defined(ST7735_CS) || defined(ILI9341_DRIVER) || defined(ILI9342_DRIVER) || defined(ST7701_CS) || \
|
||||
defined(ST7789_CS) || defined(RAK14014) || defined(HX8357_CS)
|
||||
defined(ST7789_CS) || defined(RAK14014) || defined(HX8357_CS) || defined(ILI9488_CS)
|
||||
static_cast<TFTDisplay *>(dispdev)->flipScreenVertically();
|
||||
#elif defined(USE_ST7789)
|
||||
static_cast<ST7789Spi *>(dispdev)->flipScreenVertically();
|
||||
@ -2487,7 +2487,7 @@ void DebugInfo::drawFrame(OLEDDisplay *display, OLEDDisplayUiState *state, int16
|
||||
if (!Throttle::isWithinTimespanMs(storeForwardModule->lastHeartbeat,
|
||||
(storeForwardModule->heartbeatInterval * 1200))) { // no heartbeat, overlap a bit
|
||||
#if (defined(USE_EINK) || defined(ILI9341_DRIVER) || defined(ILI9342_DRIVER) || defined(ST7701_CS) || defined(ST7735_CS) || \
|
||||
defined(ST7789_CS) || defined(USE_ST7789) || defined(HX8357_CS) || ARCH_PORTDUINO) && \
|
||||
defined(ST7789_CS) || defined(USE_ST7789) || defined(HX8357_CS) || defined(ILI9488_CS) || ARCH_PORTDUINO) && \
|
||||
!defined(DISPLAY_FORCE_SMALL_FONTS)
|
||||
display->drawFastImage(x + SCREEN_WIDTH - 14 - display->getStringWidth(ourId), y + 3 + FONT_HEIGHT_SMALL, 12, 8,
|
||||
imgQuestionL1);
|
||||
@ -2499,7 +2499,7 @@ void DebugInfo::drawFrame(OLEDDisplay *display, OLEDDisplayUiState *state, int16
|
||||
#endif
|
||||
} else {
|
||||
#if (defined(USE_EINK) || defined(ILI9341_DRIVER) || defined(ILI9342_DRIVER) || defined(ST7701_CS) || defined(ST7735_CS) || \
|
||||
defined(ST7789_CS) || defined(USE_ST7789) || defined(HX8357_CS)) && \
|
||||
defined(ST7789_CS) || defined(USE_ST7789) || defined(ILI9488_CS) || defined(HX8357_CS)) && \
|
||||
!defined(DISPLAY_FORCE_SMALL_FONTS)
|
||||
display->drawFastImage(x + SCREEN_WIDTH - 18 - display->getStringWidth(ourId), y + 3 + FONT_HEIGHT_SMALL, 16, 8,
|
||||
imgSFL1);
|
||||
@ -2514,7 +2514,7 @@ void DebugInfo::drawFrame(OLEDDisplay *display, OLEDDisplayUiState *state, int16
|
||||
} else {
|
||||
// TODO: Raspberry Pi supports more than just the one screen size
|
||||
#if (defined(USE_EINK) || defined(ILI9341_DRIVER) || defined(ILI9342_DRIVER) || defined(ST7701_CS) || defined(ST7735_CS) || \
|
||||
defined(ST7789_CS) || defined(USE_ST7789) || defined(HX8357_CS) || ARCH_PORTDUINO) && \
|
||||
defined(ST7789_CS) || defined(USE_ST7789) || defined(HX8357_CS) || defined(ILI9488_CS) || ARCH_PORTDUINO) && \
|
||||
!defined(DISPLAY_FORCE_SMALL_FONTS)
|
||||
display->drawFastImage(x + SCREEN_WIDTH - 14 - display->getStringWidth(ourId), y + 3 + FONT_HEIGHT_SMALL, 12, 8,
|
||||
imgInfoL1);
|
||||
|
||||
@ -65,7 +65,7 @@
|
||||
#endif
|
||||
|
||||
#if (defined(USE_EINK) || defined(ILI9341_DRIVER) || defined(ILI9342_DRIVER) || defined(ST7701_CS) || defined(ST7735_CS) || \
|
||||
defined(ST7789_CS) || defined(USE_ST7789) || defined(HX8357_CS)) && \
|
||||
defined(ST7789_CS) || defined(USE_ST7789) || defined(HX8357_CS)) || defined(ILI9488_CS) && \
|
||||
!defined(DISPLAY_FORCE_SMALL_FONTS)
|
||||
// The screen is bigger so use bigger fonts
|
||||
#define FONT_SMALL FONT_MEDIUM_LOCAL // Height: 19
|
||||
|
||||
@ -120,6 +120,303 @@ static void rak14014_tpIntHandle(void)
|
||||
_rak14014_touch_int = true;
|
||||
}
|
||||
|
||||
#elif defined (ST72xx_DE)
|
||||
#include <LovyanGFX.hpp>
|
||||
#include <lgfx/v1/platforms/esp32s3/Bus_RGB.hpp>
|
||||
#include <lgfx/v1/platforms/esp32s3/Panel_RGB.hpp>
|
||||
#include <TCA9534.h>
|
||||
TCA9534 ioex;
|
||||
|
||||
class LGFX : public lgfx::LGFX_Device
|
||||
{
|
||||
lgfx::Bus_RGB _bus_instance;
|
||||
lgfx::Panel_RGB _panel_instance;
|
||||
lgfx::Touch_GT911 _touch_instance;
|
||||
|
||||
public:
|
||||
const uint16_t screenWidth = TFT_WIDTH;
|
||||
const uint16_t screenHeight = TFT_HEIGHT;
|
||||
|
||||
bool init_impl(bool use_reset, bool use_clear) override
|
||||
{
|
||||
ioex.attach(Wire);
|
||||
ioex.setDeviceAddress(0x18);
|
||||
ioex.config(1, TCA9534::Config::OUT);
|
||||
ioex.config(2, TCA9534::Config::OUT);
|
||||
ioex.config(3, TCA9534::Config::OUT);
|
||||
ioex.config(4, TCA9534::Config::OUT);
|
||||
|
||||
ioex.output(1, TCA9534::Level::H);
|
||||
ioex.output(3, TCA9534::Level::L);
|
||||
ioex.output(4, TCA9534::Level::H);
|
||||
|
||||
pinMode(1, OUTPUT);
|
||||
digitalWrite(1, LOW);
|
||||
ioex.output(2, TCA9534::Level::L);
|
||||
delay(20);
|
||||
ioex.output(2, TCA9534::Level::H);
|
||||
delay(100);
|
||||
pinMode(1, INPUT);
|
||||
|
||||
return LGFX_Device::init_impl(use_reset, use_clear);
|
||||
}
|
||||
|
||||
LGFX(void)
|
||||
{
|
||||
{
|
||||
auto cfg = _panel_instance.config();
|
||||
|
||||
cfg.memory_width = screenWidth;
|
||||
cfg.memory_height = screenHeight;
|
||||
cfg.panel_width = screenWidth;
|
||||
cfg.panel_height = screenHeight;
|
||||
cfg.offset_x = 0;
|
||||
cfg.offset_y = 0;
|
||||
cfg.offset_rotation = 0;
|
||||
_panel_instance.config(cfg);
|
||||
}
|
||||
|
||||
{
|
||||
auto cfg = _panel_instance.config_detail();
|
||||
cfg.use_psram = 0;
|
||||
_panel_instance.config_detail(cfg);
|
||||
}
|
||||
|
||||
{
|
||||
auto cfg = _bus_instance.config();
|
||||
cfg.panel = &_panel_instance;
|
||||
cfg.pin_d0 = ST72xx_B0; // B0
|
||||
cfg.pin_d1 = ST72xx_B1; // B1
|
||||
cfg.pin_d2 = ST72xx_B2; // B2
|
||||
cfg.pin_d3 = ST72xx_B3; // B3
|
||||
cfg.pin_d4 = ST72xx_B4; // B4
|
||||
cfg.pin_d5 = ST72xx_G0; // G0
|
||||
cfg.pin_d6 = ST72xx_G1; // G1
|
||||
cfg.pin_d7 = ST72xx_G2; // G2
|
||||
cfg.pin_d8 = ST72xx_G3; // G3
|
||||
cfg.pin_d9 = ST72xx_G4; // G4
|
||||
cfg.pin_d10 = ST72xx_G5; // G5
|
||||
cfg.pin_d11 = ST72xx_R0; // R0
|
||||
cfg.pin_d12 = ST72xx_R1; // R1
|
||||
cfg.pin_d13 = ST72xx_R2; // R2
|
||||
cfg.pin_d14 = ST72xx_R3; // R3
|
||||
cfg.pin_d15 = ST72xx_R4; // R4
|
||||
|
||||
cfg.pin_henable = ST72xx_DE;
|
||||
cfg.pin_vsync = ST72xx_VSYNC;
|
||||
cfg.pin_hsync = ST72xx_HSYNC;
|
||||
cfg.pin_pclk = ST72xx_PCLK;
|
||||
cfg.freq_write = 13000000;
|
||||
|
||||
#ifdef ST7265_HSYNC_POLARITY
|
||||
cfg.hsync_polarity = ST7265_HSYNC_POLARITY;
|
||||
cfg.hsync_front_porch = ST7265_HSYNC_FRONT_PORCH; //8;
|
||||
cfg.hsync_pulse_width = ST7265_HSYNC_PULSE_WIDTH; //4;
|
||||
cfg.hsync_back_porch = ST7265_HSYNC_BACK_PORCH; //8;
|
||||
|
||||
cfg.vsync_polarity = ST7265_VSYNC_POLARITY; //0;
|
||||
cfg.vsync_front_porch = ST7265_VSYNC_FRONT_PORCH; //8;
|
||||
cfg.vsync_pulse_width = ST7265_VSYNC_PULSE_WIDTH; //4;
|
||||
cfg.vsync_back_porch = ST7265_VSYNC_BACK_PORCH; //8;
|
||||
|
||||
cfg.pclk_idle_high = 1;
|
||||
cfg.pclk_active_neg = ST7265_PCLK_ACTIVE_NEG; //0;
|
||||
//cfg.pclk_idle_high = 0;
|
||||
//cfg.de_idle_high = 1;
|
||||
#endif
|
||||
|
||||
#ifdef ST7262_HSYNC_POLARITY
|
||||
cfg.hsync_polarity = ST7262_HSYNC_POLARITY;
|
||||
cfg.hsync_front_porch = ST7262_HSYNC_FRONT_PORCH; //8;
|
||||
cfg.hsync_pulse_width = ST7262_HSYNC_PULSE_WIDTH; //4;
|
||||
cfg.hsync_back_porch = ST7262_HSYNC_BACK_PORCH; //8;
|
||||
|
||||
cfg.vsync_polarity = ST7262_VSYNC_POLARITY; //0;
|
||||
cfg.vsync_front_porch = ST7262_VSYNC_FRONT_PORCH; //8;
|
||||
cfg.vsync_pulse_width = ST7262_VSYNC_PULSE_WIDTH; //4;
|
||||
cfg.vsync_back_porch = ST7262_VSYNC_BACK_PORCH; //8;
|
||||
|
||||
cfg.pclk_idle_high = 1;
|
||||
cfg.pclk_active_neg = ST7262_PCLK_ACTIVE_NEG; //0;
|
||||
//cfg.pclk_idle_high = 0;
|
||||
//cfg.de_idle_high = 1;
|
||||
#endif
|
||||
|
||||
#ifdef SC7277_HSYNC_POLARITY
|
||||
cfg.hsync_polarity = SC7277_HSYNC_POLARITY;
|
||||
cfg.hsync_front_porch = SC7277_HSYNC_FRONT_PORCH; //8;
|
||||
cfg.hsync_pulse_width = SC7277_HSYNC_PULSE_WIDTH; //4;
|
||||
cfg.hsync_back_porch = SC7277_HSYNC_BACK_PORCH; //8;
|
||||
|
||||
cfg.vsync_polarity = SC7277_VSYNC_POLARITY; //0;
|
||||
cfg.vsync_front_porch = SC7277_VSYNC_FRONT_PORCH; //8;
|
||||
cfg.vsync_pulse_width = SC7277_VSYNC_PULSE_WIDTH; //4;
|
||||
cfg.vsync_back_porch = SC7277_VSYNC_BACK_PORCH; //8;
|
||||
|
||||
cfg.pclk_idle_high = 1;
|
||||
cfg.pclk_active_neg = SC7277_PCLK_ACTIVE_NEG; //0;
|
||||
//cfg.pclk_idle_high = 0;
|
||||
//cfg.de_idle_high = 1;
|
||||
#endif
|
||||
|
||||
_bus_instance.config(cfg);
|
||||
}
|
||||
_panel_instance.setBus(&_bus_instance);
|
||||
|
||||
{
|
||||
auto cfg = _touch_instance.config();
|
||||
cfg.x_min = 0;
|
||||
cfg.x_max = TFT_WIDTH;
|
||||
cfg.y_min = 0;
|
||||
cfg.y_max = TFT_HEIGHT;
|
||||
cfg.pin_int = -1;
|
||||
cfg.pin_rst = -1;
|
||||
cfg.bus_shared = true;
|
||||
cfg.offset_rotation = 0;
|
||||
|
||||
cfg.i2c_port = 0;
|
||||
cfg.i2c_addr = 0x5D;
|
||||
cfg.pin_sda = I2C_SDA;
|
||||
cfg.pin_scl = I2C_SCL;
|
||||
cfg.freq = 400000;
|
||||
_touch_instance.config(cfg);
|
||||
_panel_instance.setTouch(&_touch_instance);
|
||||
}
|
||||
|
||||
setPanel(&_panel_instance);
|
||||
}
|
||||
};
|
||||
|
||||
static LGFX *tft = nullptr;
|
||||
|
||||
#elif defined(ILI9488_CS)
|
||||
#include <LovyanGFX.hpp> // Graphics and font library for ILI9488 driver chip
|
||||
|
||||
class LGFX : public lgfx::LGFX_Device
|
||||
{
|
||||
lgfx::Panel_ILI9488 _panel_instance;
|
||||
lgfx::Bus_SPI _bus_instance;
|
||||
lgfx::Light_PWM _light_instance;
|
||||
lgfx::Touch_GT911 _touch_instance;
|
||||
|
||||
public:
|
||||
LGFX(void)
|
||||
{
|
||||
{
|
||||
auto cfg = _bus_instance.config();
|
||||
|
||||
// configure SPI
|
||||
cfg.spi_host = ILI9488_SPI_HOST; // ESP32-S2,S3,C3 : SPI2_HOST or SPI3_HOST / ESP32 : VSPI_HOST or HSPI_HOST
|
||||
cfg.spi_mode = 0;
|
||||
cfg.freq_write = SPI_FREQUENCY; // SPI clock for transmission (up to 80MHz, rounded to the value obtained by dividing
|
||||
// 80MHz by an integer)
|
||||
cfg.freq_read = SPI_READ_FREQUENCY; // SPI clock when receiving
|
||||
cfg.spi_3wire = false; // Set to true if reception is done on the MOSI pin
|
||||
cfg.use_lock = true; // Set to true to use transaction locking
|
||||
cfg.dma_channel = SPI_DMA_CH_AUTO; // SPI_DMA_CH_AUTO; // Set DMA channel to use (0=not use DMA / 1=1ch / 2=ch /
|
||||
// SPI_DMA_CH_AUTO=auto setting)
|
||||
cfg.pin_sclk = ILI9488_SCK; // Set SPI SCLK pin number
|
||||
cfg.pin_mosi = ILI9488_SDA; // Set SPI MOSI pin number
|
||||
cfg.pin_miso = ILI9488_MISO; // Set SPI MISO pin number (-1 = disable)
|
||||
cfg.pin_dc = ILI9488_RS; // Set SPI DC pin number (-1 = disable)
|
||||
|
||||
_bus_instance.config(cfg); // applies the set value to the bus.
|
||||
_panel_instance.setBus(&_bus_instance); // set the bus on the panel.
|
||||
}
|
||||
|
||||
{ // Set the display panel control.
|
||||
auto cfg = _panel_instance.config(); // Gets a structure for display panel settings.
|
||||
|
||||
cfg.pin_cs = ILI9488_CS; // Pin number where CS is connected (-1 = disable)
|
||||
cfg.pin_rst = -1; // Pin number where RST is connected (-1 = disable)
|
||||
cfg.pin_busy = -1; // Pin number where BUSY is connected (-1 = disable)
|
||||
|
||||
// The following setting values are general initial values for each panel, so please comment out any
|
||||
// unknown items and try them.
|
||||
|
||||
cfg.memory_width = TFT_WIDTH; // Maximum width supported by the driver IC
|
||||
cfg.memory_height = TFT_HEIGHT; // Maximum height supported by the driver IC
|
||||
cfg.panel_width = TFT_WIDTH; // actual displayable width
|
||||
cfg.panel_height = TFT_HEIGHT; // actual displayable height
|
||||
cfg.offset_x = TFT_OFFSET_X; // Panel offset amount in X direction
|
||||
cfg.offset_y = TFT_OFFSET_Y; // Panel offset amount in Y direction
|
||||
cfg.offset_rotation = TFT_OFFSET_ROTATION; // Rotation direction value offset 0~7 (4~7 is mirrored)
|
||||
#ifdef TFT_DUMMY_READ_PIXELS
|
||||
cfg.dummy_read_pixel = TFT_DUMMY_READ_PIXELS; // Number of bits for dummy read before pixel readout
|
||||
#else
|
||||
cfg.dummy_read_pixel = 9; // Number of bits for dummy read before pixel readout
|
||||
#endif
|
||||
cfg.dummy_read_bits = 1; // Number of bits for dummy read before non-pixel data read
|
||||
cfg.readable = true; // Set to true if data can be read
|
||||
cfg.invert = true; // Set to true if the light/darkness of the panel is reversed
|
||||
cfg.rgb_order = false; // Set to true if the panel's red and blue are swapped
|
||||
cfg.dlen_16bit =
|
||||
false; // Set to true for panels that transmit data length in 16-bit units with 16-bit parallel or SPI
|
||||
cfg.bus_shared = true; // If the bus is shared with the SD card, set to true (bus control with drawJpgFile etc.)
|
||||
|
||||
// Set the following only when the display is shifted with a driver with a variable number of pixels, such as the
|
||||
// ST7735 or ILI9163.
|
||||
// cfg.memory_width = TFT_WIDTH; // Maximum width supported by the driver IC
|
||||
// cfg.memory_height = TFT_HEIGHT; // Maximum height supported by the driver IC
|
||||
_panel_instance.config(cfg);
|
||||
}
|
||||
|
||||
#ifdef ILI9488_BL
|
||||
// Set the backlight control
|
||||
{
|
||||
auto cfg = _light_instance.config(); // Gets a structure for backlight settings.
|
||||
|
||||
cfg.pin_bl = ILI9488_BL; // Pin number to which the backlight is connected
|
||||
cfg.invert = false; // true to invert the brightness of the backlight
|
||||
// cfg.freq = 44100; // PWM frequency of backlight
|
||||
// cfg.pwm_channel = 1; // PWM channel number to use
|
||||
|
||||
_light_instance.config(cfg);
|
||||
_panel_instance.setLight(&_light_instance); // Set the backlight on the panel.
|
||||
}
|
||||
#endif
|
||||
|
||||
#if HAS_TOUCHSCREEN
|
||||
// Configure settings for touch screen control.
|
||||
{
|
||||
auto cfg = _touch_instance.config();
|
||||
|
||||
cfg.pin_cs = -1;
|
||||
cfg.x_min = 0;
|
||||
cfg.x_max = TFT_HEIGHT - 1;
|
||||
cfg.y_min = 0;
|
||||
cfg.y_max = TFT_WIDTH - 1;
|
||||
cfg.pin_int = SCREEN_TOUCH_INT;
|
||||
#ifdef SCREEN_TOUCH_RST
|
||||
cfg.pin_rst = SCREEN_TOUCH_RST;
|
||||
#endif
|
||||
cfg.bus_shared = true;
|
||||
cfg.offset_rotation = TFT_OFFSET_ROTATION;
|
||||
// cfg.freq = 2500000;
|
||||
|
||||
// I2C
|
||||
cfg.i2c_port = TOUCH_I2C_PORT;
|
||||
cfg.i2c_addr = TOUCH_SLAVE_ADDRESS;
|
||||
#ifdef SCREEN_TOUCH_USE_I2C1
|
||||
cfg.pin_sda = I2C_SDA1;
|
||||
cfg.pin_scl = I2C_SCL1;
|
||||
#else
|
||||
cfg.pin_sda = I2C_SDA;
|
||||
cfg.pin_scl = I2C_SCL;
|
||||
#endif
|
||||
// cfg.freq = 400000;
|
||||
|
||||
_touch_instance.config(cfg);
|
||||
_panel_instance.setTouch(&_touch_instance);
|
||||
}
|
||||
#endif
|
||||
|
||||
setPanel(&_panel_instance);
|
||||
}
|
||||
};
|
||||
|
||||
static LGFX *tft = nullptr;
|
||||
|
||||
#elif defined(ST7789_CS)
|
||||
#include <LovyanGFX.hpp> // Graphics and font library for ST7735 driver chip
|
||||
|
||||
@ -171,12 +468,18 @@ class LGFX : public lgfx::LGFX_Device
|
||||
// The following setting values are general initial values for each panel, so please comment out any
|
||||
// unknown items and try them.
|
||||
|
||||
cfg.memory_width = TFT_WIDTH; // Maximum width supported by the driver IC
|
||||
cfg.memory_height = TFT_HEIGHT; // Maximum height supported by the driver IC
|
||||
cfg.panel_width = TFT_WIDTH; // actual displayable width
|
||||
cfg.panel_height = TFT_HEIGHT; // actual displayable height
|
||||
cfg.offset_x = TFT_OFFSET_X; // Panel offset amount in X direction
|
||||
cfg.offset_y = TFT_OFFSET_Y; // Panel offset amount in Y direction
|
||||
cfg.offset_rotation = TFT_OFFSET_ROTATION; // Rotation direction value offset 0~7 (4~7 is mirrored)
|
||||
#ifdef TFT_DUMMY_READ_PIXELS
|
||||
cfg.dummy_read_pixel = TFT_DUMMY_READ_PIXELS; // Number of bits for dummy read before pixel readout
|
||||
#else
|
||||
cfg.dummy_read_pixel = 9; // Number of bits for dummy read before pixel readout
|
||||
#endif
|
||||
cfg.dummy_read_bits = 1; // Number of bits for dummy read before non-pixel data read
|
||||
cfg.readable = true; // Set to true if data can be read
|
||||
cfg.invert = true; // Set to true if the light/darkness of the panel is reversed
|
||||
@ -217,6 +520,9 @@ class LGFX : public lgfx::LGFX_Device
|
||||
cfg.y_min = 0;
|
||||
cfg.y_max = TFT_WIDTH - 1;
|
||||
cfg.pin_int = SCREEN_TOUCH_INT;
|
||||
#ifdef SCREEN_TOUCH_RST
|
||||
cfg.pin_rst = SCREEN_TOUCH_RST;
|
||||
#endif
|
||||
cfg.bus_shared = true;
|
||||
cfg.offset_rotation = TFT_OFFSET_ROTATION;
|
||||
// cfg.freq = 2500000;
|
||||
@ -640,7 +946,7 @@ static LGFX *tft = nullptr;
|
||||
#endif
|
||||
|
||||
#if defined(ST7701_CS) || defined(ST7735_CS) || defined(ST7789_CS) || defined(ILI9341_DRIVER) || defined(ILI9342_DRIVER) || \
|
||||
defined(RAK14014) || defined(HX8357_CS) || (ARCH_PORTDUINO && HAS_SCREEN != 0)
|
||||
defined(RAK14014) || defined(HX8357_CS) || defined(ILI9488_CS) || defined (ST72xx_DE) || (ARCH_PORTDUINO && HAS_SCREEN != 0)
|
||||
#include "SPILock.h"
|
||||
#include "TFTDisplay.h"
|
||||
#include <SPI.h>
|
||||
|
||||
@ -21,7 +21,7 @@ const uint8_t bluetoothConnectedIcon[36] PROGMEM = {0xfe, 0x01, 0xff, 0x03, 0x03
|
||||
#endif
|
||||
|
||||
#if (defined(USE_EINK) || defined(ILI9341_DRIVER) || defined(ILI9342_DRIVER) || defined(ST7701_CS) || defined(ST7735_CS) || \
|
||||
defined(ST7789_CS) || defined(USE_ST7789) || defined(HX8357_CS) || ARCH_PORTDUINO) && \
|
||||
defined(ST7789_CS) || defined(USE_ST7789) || defined(HX8357_CS) || defined(ILI9488_CS) || ARCH_PORTDUINO) && \
|
||||
!defined(DISPLAY_FORCE_SMALL_FONTS)
|
||||
const uint8_t imgQuestionL1[] PROGMEM = {0xff, 0x01, 0x01, 0x32, 0x7b, 0x49, 0x49, 0x6f, 0x26, 0x01, 0x01, 0xff};
|
||||
const uint8_t imgQuestionL2[] PROGMEM = {0x0f, 0x08, 0x08, 0x08, 0x06, 0x0f, 0x0f, 0x06, 0x08, 0x08, 0x08, 0x0f};
|
||||
|
||||
@ -115,6 +115,10 @@ AccelerometerThread *accelerometerThread = nullptr;
|
||||
AudioThread *audioThread = nullptr;
|
||||
#endif
|
||||
|
||||
#ifdef USE_PCA9557
|
||||
PCA9557 IOEXP;
|
||||
#endif
|
||||
|
||||
#if HAS_TFT
|
||||
extern void tftSetup(void);
|
||||
#endif
|
||||
@ -876,7 +880,7 @@ void setup()
|
||||
// Don't call screen setup until after nodedb is setup (because we need
|
||||
// the current region name)
|
||||
#if defined(ST7701_CS) || defined(ST7735_CS) || defined(USE_EINK) || defined(ILI9341_DRIVER) || defined(ILI9342_DRIVER) || \
|
||||
defined(ST7789_CS) || defined(HX8357_CS) || defined(USE_ST7789)
|
||||
defined(ST7789_CS) || defined(HX8357_CS) || defined(USE_ST7789) || defined(ILI9488_CS)
|
||||
screen->setup();
|
||||
#elif defined(ARCH_PORTDUINO)
|
||||
if (screen_found.port != ScanI2C::I2CPort::NO_I2C || settingsMap[displayPanel]) {
|
||||
|
||||
@ -595,7 +595,7 @@ void NodeDB::installDefaultConfig(bool preserveKey = false)
|
||||
config.bluetooth.fixed_pin = defaultBLEPin;
|
||||
|
||||
#if defined(ST7735_CS) || defined(USE_EINK) || defined(ILI9341_DRIVER) || defined(ILI9342_DRIVER) || defined(ST7789_CS) || \
|
||||
defined(HX8357_CS) || defined(USE_ST7789)
|
||||
defined(HX8357_CS) || defined(USE_ST7789) || defined(ILI9488_CS)
|
||||
bool hasScreen = true;
|
||||
#ifdef HELTEC_MESH_NODE_T114
|
||||
uint32_t st7789_id = get_st7789_id(ST7789_NSS, ST7789_SCK, ST7789_SDA, ST7789_RS, ST7789_RESET);
|
||||
|
||||
56
variants/elecrow_panel/pins_arduino.h
Normal file
56
variants/elecrow_panel/pins_arduino.h
Normal file
@ -0,0 +1,56 @@
|
||||
#ifndef Pins_Arduino_h
|
||||
#define Pins_Arduino_h
|
||||
|
||||
#include <stdint.h>
|
||||
|
||||
// static const uint8_t LED_BUILTIN = -1;
|
||||
|
||||
// static const uint8_t TX = 43;
|
||||
// static const uint8_t RX = 44;
|
||||
|
||||
static const uint8_t SDA = 39;
|
||||
static const uint8_t SCL = 40;
|
||||
|
||||
// Default SPI will be mapped to Radio
|
||||
static const uint8_t SS = -1;
|
||||
static const uint8_t MOSI = 48;
|
||||
static const uint8_t MISO = 47;
|
||||
static const uint8_t SCK = 41;
|
||||
|
||||
static const uint8_t A0 = 1;
|
||||
static const uint8_t A1 = 2;
|
||||
static const uint8_t A2 = 3;
|
||||
static const uint8_t A3 = 4;
|
||||
static const uint8_t A4 = 5;
|
||||
static const uint8_t A5 = 6;
|
||||
static const uint8_t A6 = 7;
|
||||
static const uint8_t A7 = 8;
|
||||
static const uint8_t A8 = 9;
|
||||
static const uint8_t A9 = 10;
|
||||
static const uint8_t A10 = 11;
|
||||
static const uint8_t A11 = 12;
|
||||
static const uint8_t A12 = 13;
|
||||
static const uint8_t A13 = 14;
|
||||
static const uint8_t A14 = 15;
|
||||
static const uint8_t A15 = 16;
|
||||
static const uint8_t A16 = 17;
|
||||
static const uint8_t A17 = 18;
|
||||
static const uint8_t A18 = 19;
|
||||
static const uint8_t A19 = 20;
|
||||
|
||||
static const uint8_t T1 = 1;
|
||||
static const uint8_t T2 = 2;
|
||||
static const uint8_t T3 = 3;
|
||||
static const uint8_t T4 = 4;
|
||||
static const uint8_t T5 = 5;
|
||||
static const uint8_t T6 = 6;
|
||||
static const uint8_t T7 = 7;
|
||||
static const uint8_t T8 = 8;
|
||||
static const uint8_t T9 = 9;
|
||||
static const uint8_t T10 = 10;
|
||||
static const uint8_t T11 = 11;
|
||||
static const uint8_t T12 = 12;
|
||||
static const uint8_t T13 = 13;
|
||||
static const uint8_t T14 = 14;
|
||||
|
||||
#endif /* Pins_Arduino_h */
|
||||
160
variants/elecrow_panel/platformio.ini
Normal file
160
variants/elecrow_panel/platformio.ini
Normal file
@ -0,0 +1,160 @@
|
||||
; elecrow 7inch Advanced
|
||||
[crowpanel_base]
|
||||
extends = esp32s3_base
|
||||
board = crowpanel
|
||||
board_check = true
|
||||
board_level = extra
|
||||
upload_protocol = esptool
|
||||
|
||||
build_flags = ${esp32s3_base.build_flags}
|
||||
-Ivariants/elecrow_panel
|
||||
-DELECROW
|
||||
-DPRIVATE_HW
|
||||
-DCONFIG_ARDUHAL_LOG_COLORS
|
||||
-DRADIOLIB_DEBUG_SPI=0
|
||||
-DRADIOLIB_DEBUG_PROTOCOL=0
|
||||
-DRADIOLIB_DEBUG_BASIC=0
|
||||
-DRADIOLIB_VERBOSE_ASSERT=0
|
||||
-DRADIOLIB_SPI_PARANOID=0
|
||||
-DUSE_ARDUINO_HAL_GPIO
|
||||
|
||||
lib_deps = ${esp32s3_base.lib_deps}
|
||||
earlephilhower/ESP8266Audio@^1.9.9
|
||||
earlephilhower/ESP8266SAM@^1.0.1
|
||||
lovyan03/LovyanGFX@^1.2.0
|
||||
hideakitai/TCA9534@^0.1.1
|
||||
|
||||
[crowpanel_base_tft]
|
||||
extends = crowpanel_base
|
||||
board_level = main
|
||||
board_build.partitions = default_16MB.csv ; must be here for some reason, board.json is not enough !?
|
||||
|
||||
build_flags =
|
||||
${crowpanel_base.build_flags} -Os
|
||||
-D MESHTASTIC_EXCLUDE_CANNEDMESSAGES=1
|
||||
-D MESHTASTIC_EXCLUDE_INPUTBROKER=1
|
||||
-D MESHTASTIC_EXCLUDE_BLUETOOTH=1
|
||||
-D MESHTASTIC_EXCLUDE_SCREEN=1
|
||||
-D MESHTASTIC_EXCLUDE_ENVIRONMENTAL_SENSOR=1
|
||||
-D MESHTASTIC_EXCLUDE_WEBSERVER=1
|
||||
-D MESHTASTIC_EXCLUDE_SERIAL=1
|
||||
-D MESHTASTIC_EXCLUDE_SOCKETAPI=1
|
||||
; -D INPUTDRIVER_BUTTON_TYPE=0
|
||||
-D HAS_TELEMETRY=0
|
||||
-D CONFIG_DISABLE_HAL_LOCKS=1
|
||||
-D MAX_NUM_NODES=250
|
||||
-D HAS_SCREEN=0
|
||||
-D HAS_TFT=1
|
||||
; -D DISPLAY_SET_RESOLUTION
|
||||
; -D USE_I2S_BUZZER
|
||||
-D RAM_SIZE=6144
|
||||
-D LV_LVGL_H_INCLUDE_SIMPLE
|
||||
-D LV_CONF_INCLUDE_SIMPLE
|
||||
-D LV_COMP_CONF_INCLUDE_SIMPLE
|
||||
-D LV_USE_SYSMON=0
|
||||
-D LV_USE_PROFILER=0
|
||||
-D LV_USE_PERF_MONITOR=0
|
||||
-D LV_USE_MEM_MONITOR=0
|
||||
-D LV_USE_LOG=0
|
||||
-D USE_LOG_DEBUG
|
||||
-D LOG_DEBUG_INC=\"DebugConfiguration.h\"
|
||||
; -D CUSTOM_TOUCH_DRIVER
|
||||
; -D CALIBRATE_TOUCH=0
|
||||
; -D USE_DOUBLE_BUFFER
|
||||
-D USE_PACKET_API
|
||||
|
||||
build_src_filter =
|
||||
${crowpanel_base.build_src_filter}
|
||||
+<../lib/device-ui/resources>
|
||||
+<../lib/device-ui/locale>
|
||||
+<../lib/device-ui/source>
|
||||
|
||||
# 2.4 inch 320x240 IPS ST7789
|
||||
[env:elecrow-24]
|
||||
extends = crowpanel_base
|
||||
|
||||
build_flags =
|
||||
${crowpanel_base.build_flags}
|
||||
-D TFT_HEIGHT=320
|
||||
-D TFT_WIDTH=240
|
||||
-D TFT_OFFSET_X=0
|
||||
-D TFT_OFFSET_Y=0
|
||||
-D TFT_BUSY=-1
|
||||
|
||||
# 2.8 inch 320x480 IPS ST7789
|
||||
[env:elecrow-28]
|
||||
extends = crowpanel_base
|
||||
|
||||
build_flags =
|
||||
${crowpanel_base.build_flags}
|
||||
-D TFT_HEIGHT=320
|
||||
-D TFT_WIDTH=240
|
||||
-D TFT_OFFSET_X=0
|
||||
-D TFT_OFFSET_Y=0
|
||||
-D TFT_BUSY=-1
|
||||
|
||||
# 3.5 inch 480x320 IPS ILI9488
|
||||
[env:elecrow-35]
|
||||
extends = crowpanel_base
|
||||
|
||||
build_flags =
|
||||
${crowpanel_base.build_flags}
|
||||
-D TFT_HEIGHT=480
|
||||
-D TFT_WIDTH=320
|
||||
-D TFT_OFFSET_X=0
|
||||
-D TFT_OFFSET_Y=0
|
||||
-D TFT_BUSY=-1
|
||||
|
||||
# 4.3 inch 800x480 IPS ST7265
|
||||
[env:elecrow-43]
|
||||
extends = crowpanel_base
|
||||
|
||||
build_flags =
|
||||
${crowpanel_base.build_flags}
|
||||
-D TFT_HEIGHT=480
|
||||
-D TFT_WIDTH=800
|
||||
-D TFT_OFFSET_X=0
|
||||
-D TFT_OFFSET_Y=0
|
||||
-D TFT_BUSY=-1
|
||||
-D CROW_SELECT=1
|
||||
|
||||
# 5 inch 800x480 IPS ST7262
|
||||
[env:elecrow-50]
|
||||
extends = crowpanel_base
|
||||
|
||||
build_flags =
|
||||
${crowpanel_base.build_flags}
|
||||
-D TFT_HEIGHT=480
|
||||
-D TFT_WIDTH=800
|
||||
-D TFT_OFFSET_X=0
|
||||
-D TFT_OFFSET_Y=0
|
||||
-D TFT_BUSY=-1
|
||||
-D CROW_SELECT=2
|
||||
|
||||
# 7 inch 800x480 IPS SC7277
|
||||
[env:elecrow-70]
|
||||
extends = crowpanel_base
|
||||
|
||||
build_flags =
|
||||
${crowpanel_base.build_flags}
|
||||
-D TFT_HEIGHT=480
|
||||
-D TFT_WIDTH=800
|
||||
-D TFT_OFFSET_X=0
|
||||
-D TFT_OFFSET_Y=0
|
||||
-D TFT_BUSY=-1
|
||||
-D CROW_SELECT=3
|
||||
|
||||
[env:elecrow-70-tft]
|
||||
extends = crowpanel_base_tft
|
||||
|
||||
build_flags =
|
||||
${crowpanel_base_tft.build_flags}
|
||||
-D LGFX_DRIVER=LGFX_ELECROW70
|
||||
-D GFX_DRIVER_INC=\"graphics/LGFX/LGFX_ELECROW70.h\"
|
||||
-D VIEW_800x480
|
||||
-I lib/device-ui/generated/ui_800x480
|
||||
|
||||
build_src_filter =
|
||||
${crowpanel_base_tft.build_src_filter}
|
||||
+<../lib/device-ui/generated/ui_800x480>
|
||||
+<../lib/device-ui/generated/ui_800x480/images>
|
||||
201
variants/elecrow_panel/variant.h
Normal file
201
variants/elecrow_panel/variant.h
Normal file
@ -0,0 +1,201 @@
|
||||
#define I2C_SDA 15
|
||||
#define I2C_SCL 16
|
||||
|
||||
#define PIN_BUZZER 8
|
||||
|
||||
#if TFT_HEIGHT == 320 //2.4 and 2.8 TFT
|
||||
// ST7789 TFT LCD
|
||||
#define ST7789_CS 40
|
||||
#define ST7789_RS 41 // DC
|
||||
#define ST7789_SDA 39 // MOSI
|
||||
#define ST7789_SCK 42
|
||||
#define ST7789_RESET -1
|
||||
#define ST7789_MISO 38
|
||||
#define ST7789_BUSY -1
|
||||
#define ST7789_BL 38
|
||||
#define ST7789_SPI_HOST SPI2_HOST
|
||||
#define TFT_BL 38
|
||||
#define SPI_FREQUENCY 40000000
|
||||
#define SPI_READ_FREQUENCY 16000000
|
||||
#define TFT_OFFSET_ROTATION 0
|
||||
#define SCREEN_ROTATE
|
||||
#define TFT_DUMMY_READ_PIXELS 8
|
||||
#define SCREEN_TRANSITION_FRAMERATE 5
|
||||
#define BRIGHTNESS_DEFAULT 130 // Medium Low Brightness
|
||||
|
||||
#define HAS_TOUCHSCREEN 1
|
||||
#define SCREEN_TOUCH_INT 47
|
||||
#define SCREEN_TOUCH_RST 48
|
||||
#define TOUCH_I2C_PORT 0
|
||||
#define TOUCH_SLAVE_ADDRESS 0x5D // GT911
|
||||
#endif
|
||||
|
||||
#if TFT_HEIGHT == 480 // 3.5 TFT
|
||||
// ILI9488 TFT LCD
|
||||
#define ILI9488_CS 40
|
||||
#define ILI9488_RS 41 // DC
|
||||
#define ILI9488_SDA 39 // MOSI
|
||||
#define ILI9488_SCK 42
|
||||
#define ILI9488_RESET -1
|
||||
#define ILI9488_MISO 38
|
||||
#define ILI9488_BUSY -1
|
||||
#define ILI9488_BL 38
|
||||
#define ILI9488_SPI_HOST SPI2_HOST
|
||||
#define TFT_BL 38
|
||||
#define SPI_FREQUENCY 40000000
|
||||
#define SPI_READ_FREQUENCY 16000000
|
||||
#define TFT_OFFSET_ROTATION 0
|
||||
#define SCREEN_ROTATE
|
||||
#define TFT_DUMMY_READ_PIXELS 8
|
||||
#define SCREEN_TRANSITION_FRAMERATE 5
|
||||
#define BRIGHTNESS_DEFAULT 130 // Medium Low Brightness
|
||||
|
||||
#define HAS_TOUCHSCREEN 1
|
||||
#define SCREEN_TOUCH_INT 47
|
||||
#define SCREEN_TOUCH_RST 48
|
||||
#define TOUCH_I2C_PORT 0
|
||||
#define TOUCH_SLAVE_ADDRESS 0x5D // GT911
|
||||
#endif
|
||||
|
||||
#ifdef CROW_SELECT
|
||||
#define ST72xx_DE 42
|
||||
#define ST72xx_VSYNC 41
|
||||
#define ST72xx_HSYNC 40
|
||||
#define ST72xx_PCLK 39
|
||||
#define ST72xx_R0 7
|
||||
#define ST72xx_R1 17
|
||||
#define ST72xx_R2 18
|
||||
#define ST72xx_R3 3
|
||||
#define ST72xx_R4 46
|
||||
#define ST72xx_G0 9
|
||||
#define ST72xx_G1 10
|
||||
#define ST72xx_G2 11
|
||||
#define ST72xx_G3 12
|
||||
#define ST72xx_G4 13
|
||||
#define ST72xx_G5 14
|
||||
#define ST72xx_B0 21
|
||||
#define ST72xx_B1 47
|
||||
#define ST72xx_B2 48
|
||||
#define ST72xx_B3 45
|
||||
#define ST72xx_B4 38
|
||||
|
||||
#define HAS_TOUCHSCREEN 1
|
||||
#define TOUCH_I2C_PORT 0
|
||||
#define TOUCH_SLAVE_ADDRESS 0x5D // GT911
|
||||
#endif
|
||||
|
||||
#if defined(CROW_SELECT) && CROW_SELECT == 1 // 4.3 TFT 800x480
|
||||
#define ST7265_HSYNC_POLARITY 0
|
||||
#define ST7265_HSYNC_FRONT_PORCH 24
|
||||
#define ST7265_HSYNC_PULSE_WIDTH 8
|
||||
#define ST7265_HSYNC_BACK_PORCH 24
|
||||
#define ST7265_VSYNC_POLARITY 1
|
||||
#define ST7265_VSYNC_FRONT_PORCH 24
|
||||
#define ST7265_VSYNC_PULSE_WIDTH 8
|
||||
#define ST7265_VSYNC_BACK_PORCH 24
|
||||
#define ST7265_PCLK_ACTIVE_NEG 1
|
||||
#endif
|
||||
|
||||
#if defined(CROW_SELECT) && CROW_SELECT == 2 // 5.0 TFT 800x480
|
||||
#define ST7262_HSYNC_POLARITY 0
|
||||
#define ST7262_HSYNC_FRONT_PORCH 8
|
||||
#define ST7262_HSYNC_PULSE_WIDTH 4
|
||||
#define ST7262_HSYNC_BACK_PORCH 8
|
||||
#define ST7262_VSYNC_POLARITY 0
|
||||
#define ST7262_VSYNC_FRONT_PORCH 8
|
||||
#define ST7262_VSYNC_PULSE_WIDTH 4
|
||||
#define ST7262_VSYNC_BACK_PORCH 8
|
||||
#define ST7262_PCLK_ACTIVE_NEG 0
|
||||
#endif
|
||||
|
||||
#if defined(CROW_SELECT) && CROW_SELECT == 3 // 7.0 TFT 800x480
|
||||
#define SC7277_HSYNC_POLARITY 0
|
||||
#define SC7277_HSYNC_FRONT_PORCH 8
|
||||
#define SC7277_HSYNC_PULSE_WIDTH 4
|
||||
#define SC7277_HSYNC_BACK_PORCH 8
|
||||
#define SC7277_VSYNC_POLARITY 0
|
||||
#define SC7277_VSYNC_FRONT_PORCH 8
|
||||
#define SC7277_VSYNC_PULSE_WIDTH 4
|
||||
#define SC7277_VSYNC_BACK_PORCH 8
|
||||
#define SC7277_PCLK_ACTIVE_NEG 0
|
||||
#endif
|
||||
|
||||
// dac / amp
|
||||
// #define HAS_I2S // cannot use LoRa / I2S / SDCard together
|
||||
// #define DAC_I2S_BCK 5
|
||||
// #define DAC_I2S_WS 6
|
||||
// #define DAC_I2S_DOUT 4
|
||||
// #define DAC_I2S_MCLK 0 // GPIO lrck mic
|
||||
|
||||
|
||||
// GPS via UART1 connector
|
||||
#define HAS_GPS 1
|
||||
//#define GPS_DEFAULT_NOT_PRESENT 1
|
||||
#define GPS_RX_PIN 18
|
||||
#define GPS_TX_PIN 17
|
||||
|
||||
#if TFT_HEIGHT == 320 || TFT_HEIGHT == 480 //2.4 - 3.5 TFT
|
||||
// SDCard (from 4.3 only if LoRa is disabled)
|
||||
#define HAS_SDCARD
|
||||
#define SPI_SCK 5
|
||||
#define SPI_MISO 4
|
||||
#define SPI_MOSI 6
|
||||
#define SDCARD_CS 7 // SD does not support -1
|
||||
#endif
|
||||
|
||||
// Extension Slot Layout, viewed from above (2.4-3.5)
|
||||
// DIO1/IO1 o o IO2/NRESET
|
||||
// SCK/IO10 o o IO16/NC
|
||||
// MISO/IO9 o o IO15/NC
|
||||
// MOSI/IO3 o o NC/DIO2
|
||||
// 3V3 o o IO46/BUSY
|
||||
// GND o o IO0/NSS
|
||||
// 5V/NC o o NC/DIO3
|
||||
// J9 J8
|
||||
|
||||
// Extension Slot Layout, viewed from above (4.3-7.0)
|
||||
// !! DIO1/IO20 o o IO19/NRESET !!
|
||||
// !! SCK/IO5 o o IO16/NC
|
||||
// !! MISO/IO4 o o IO15/NC
|
||||
// !! MOSI/IO6 o o NC/DIO2
|
||||
// 3V3 o o IO2/BUSY !!
|
||||
// GND o o IO0/NSS
|
||||
// 5V/NC o o NC/DIO3
|
||||
// J9 J8
|
||||
|
||||
// LoRa
|
||||
#define USE_SX1262
|
||||
#define LORA_CS 0 // GND
|
||||
|
||||
#if TFT_HEIGHT == 320 || TFT_HEIGHT == 480 //2.4 - 3.5 TFT
|
||||
#define LORA_SCK 10
|
||||
#define LORA_MISO 9
|
||||
#define LORA_MOSI 3
|
||||
|
||||
#define LORA_RESET 2
|
||||
#define LORA_DIO1 1 // SX1262 IRQ
|
||||
#define LORA_DIO2 46 // SX1262 BUSY
|
||||
|
||||
// need to pull IO45 low to enable LORA and disable Microphone on 24 28 35
|
||||
#define SENSOR_POWER_CTRL_PIN 45
|
||||
#define SENSOR_POWER_ON LOW
|
||||
#else
|
||||
#define LORA_SCK 5
|
||||
#define LORA_MISO 4
|
||||
#define LORA_MOSI 6
|
||||
|
||||
#define LORA_RESET 19
|
||||
#define LORA_DIO1 20 // SX1262 IRQ
|
||||
#define LORA_DIO2 2 // SX1262 BUSY
|
||||
#endif
|
||||
|
||||
#define SX126X_CS LORA_CS
|
||||
#define SX126X_DIO1 LORA_DIO1
|
||||
#define SX126X_BUSY LORA_DIO2
|
||||
#define SX126X_RESET LORA_RESET
|
||||
#define SX126X_DIO2_AS_RF_SWITCH
|
||||
|
||||
#define SX126X_DIO3_TCXO_VOLTAGE 1.8
|
||||
|
||||
#define USE_VIRTUAL_KEYBOARD 1
|
||||
#define DISPLAY_CLOCK_FRAME 1
|
||||
Loading…
Reference in New Issue
Block a user