Merge branch 'master' into tft-gui-work

.trunk/trunk.yaml

@@ -1,6 +1,6 @@
 version: 0.1
 cli:
-  version: 1.22.7
+  version: 1.22.8
 plugins:
   sources:
     - id: trunk
@@ -8,20 +8,20 @@ plugins:
       uri: https://github.com/trunk-io/plugins
 lint:
   enabled:
-    - trufflehog@3.83.2
+    - trufflehog@3.83.6
     - yamllint@1.35.1
     - bandit@1.7.10
-    - checkov@3.2.277
+    - checkov@3.2.287
     - terrascan@1.19.9
     - trivy@0.56.2
     #- trufflehog@3.63.2-rc0
     - taplo@0.9.3
-    - ruff@0.7.2
+    - ruff@0.7.3
     - isort@5.13.2
     - markdownlint@0.42.0
     - oxipng@9.1.2
     - svgo@3.3.2
-    - actionlint@1.7.3
+    - actionlint@1.7.4
     - flake8@7.1.1
     - hadolint@2.12.0
     - shfmt@3.6.0

arch/nrf52/nrf52.ini

@@ -15,6 +15,7 @@ build_flags =
   -Isrc/platform/nrf52
   -DLFS_NO_ASSERT                      ; Disable LFS assertions , see https://github.com/meshtastic/firmware/pull/3818
   -DMESHTASTIC_EXCLUDE_AUDIO=1
+  -DMESHTASTIC_EXCLUDE_PAXCOUNTER=1
 
 build_src_filter = 
   ${arduino_base.build_src_filter} -<platform/esp32/> -<platform/stm32wl> -<nimble/> -<mesh/wifi/> -<mesh/api/> -<mesh/http/> -<modules/esp32> -<platform/rp2xx0> -<mesh/eth/> -<mesh/raspihttp>

protobufs

@@ -1 +1 @@
-Subproject commit 04f21f5c7238b8e02f794d9282c4786752634b3c
+Subproject commit af2fea10fe2eba5857fb8e27975bbcea9c10af8e

src/ButtonThread.cpp

@@ -1,4 +1,5 @@
 #include "ButtonThread.h"
+#include "../userPrefs.h"
 #include "configuration.h"
 #if !MESHTASTIC_EXCLUDE_GPS
 #include "GPS.h"
@@ -26,12 +27,12 @@ using namespace concurrency;
 ButtonThread *buttonThread; // Declared extern in header
 volatile ButtonThread::ButtonEventType ButtonThread::btnEvent = ButtonThread::BUTTON_EVENT_NONE;
 
-#if defined(BUTTON_PIN) || defined(ARCH_PORTDUINO)
+#if defined(BUTTON_PIN) || defined(ARCH_PORTDUINO) || defined(USERPREFS_BUTTON_PIN)
 OneButton ButtonThread::userButton; // Get reference to static member
 #endif
 ButtonThread::ButtonThread() : OSThread("Button")
 {
-#if defined(BUTTON_PIN) || defined(ARCH_PORTDUINO)
+#if defined(BUTTON_PIN) || defined(ARCH_PORTDUINO) || defined(USERPREFS_BUTTON_PIN)
 
 #if defined(ARCH_PORTDUINO)
     if (settingsMap.count(user) != 0 && settingsMap[user] != RADIOLIB_NC) {
@@ -39,7 +40,12 @@ ButtonThread::ButtonThread() : OSThread("Button")
         LOG_DEBUG("Use GPIO%02d for button", settingsMap[user]);
     }
 #elif defined(BUTTON_PIN)
-    int pin = config.device.button_gpio ? config.device.button_gpio : BUTTON_PIN; // Resolved button pin
+#if !defined(USERPREFS_BUTTON_PIN)
+    int pin = config.device.button_gpio ? config.device.button_gpio : BUTTON_PIN;           // Resolved button pin
+#endif
+#ifdef USERPREFS_BUTTON_PIN
+    int pin = config.device.button_gpio ? config.device.button_gpio : USERPREFS_BUTTON_PIN; // Resolved button pin
+#endif
 #if defined(HELTEC_CAPSULE_SENSOR_V3)
     this->userButton = OneButton(pin, false, false);
 #elif defined(BUTTON_ACTIVE_LOW)
@@ -59,7 +65,7 @@ ButtonThread::ButtonThread() : OSThread("Button")
 #endif
 #endif
 
-#if defined(BUTTON_PIN) || defined(ARCH_PORTDUINO)
+#if defined(BUTTON_PIN) || defined(ARCH_PORTDUINO) || defined(USERPREFS_BUTTON_PIN)
     userButton.attachClick(userButtonPressed);
     userButton.setClickMs(BUTTON_CLICK_MS);
     userButton.setPressMs(BUTTON_LONGPRESS_MS);
@@ -102,7 +108,7 @@ int32_t ButtonThread::runOnce()
     // If the button is pressed we suppress CPU sleep until release
     canSleep = true; // Assume we should not keep the board awake
 
-#if defined(BUTTON_PIN)
+#if defined(BUTTON_PIN) || defined(USERPREFS_BUTTON_PIN)
     userButton.tick();
     canSleep &= userButton.isIdle();
 #elif defined(ARCH_PORTDUINO)
@@ -130,7 +136,12 @@ int32_t ButtonThread::runOnce()
                 return 50;
             }
 #ifdef BUTTON_PIN
+#if !defined(USERPREFS_BUTTON_PIN)
             if (((config.device.button_gpio ? config.device.button_gpio : BUTTON_PIN) !=
+#endif
+#if defined(USERPREFS_BUTTON_PIN)
+            if (((config.device.button_gpio ? config.device.button_gpio : USERPREFS_BUTTON_PIN) !=
+#endif
                  moduleConfig.canned_message.inputbroker_pin_press) ||
                 !(moduleConfig.canned_message.updown1_enabled || moduleConfig.canned_message.rotary1_enabled) ||
                 !moduleConfig.canned_message.enabled) {
@@ -244,7 +255,12 @@ void ButtonThread::attachButtonInterrupts()
 #elif defined(BUTTON_PIN)
     // Interrupt for user button, during normal use. Improves responsiveness.
     attachInterrupt(
+#if !defined(USERPREFS_BUTTON_PIN)
         config.device.button_gpio ? config.device.button_gpio : BUTTON_PIN,
+#endif
+#if defined(USERPREFS_BUTTON_PIN)
+        config.device.button_gpio ? config.device.button_gpio : USERPREFS_BUTTON_PIN,
+#endif
         []() {
             ButtonThread::userButton.tick();
             runASAP = true;
@@ -273,8 +289,13 @@ void ButtonThread::detachButtonInterrupts()
     if (settingsMap.count(user) != 0 && settingsMap[user] != RADIOLIB_NC)
         detachInterrupt(settingsMap[user]);
 #elif defined(BUTTON_PIN)
+#if !defined(USERPREFS_BUTTON_PIN)
     detachInterrupt(config.device.button_gpio ? config.device.button_gpio : BUTTON_PIN);
 #endif
+#if defined(USERPREFS_BUTTON_PIN)
+    detachInterrupt(config.device.button_gpio ? config.device.button_gpio : USERPREFS_BUTTON_PIN);
+#endif
+#endif
 
 #ifdef BUTTON_PIN_ALT
     detachInterrupt(BUTTON_PIN_ALT);
@@ -315,7 +336,7 @@ void ButtonThread::userButtonMultiPressed(void *callerThread)
 // Non-static method, runs during callback. Grabs info while still valid
 void ButtonThread::storeClickCount()
 {
-#ifdef BUTTON_PIN
+#if defined(BUTTON_PIN) || defined(USERPREFS_BUTTON_PIN)
     multipressClickCount = userButton.getNumberClicks();
 #endif
 }

src/ButtonThread.h

@@ -38,7 +38,7 @@ class ButtonThread : public concurrency::OSThread
     void storeClickCount();
 
   private:
-#if defined(BUTTON_PIN) || defined(ARCH_PORTDUINO)
+#if defined(BUTTON_PIN) || defined(ARCH_PORTDUINO) || defined(USERPREFS_BUTTON_PIN)
     static OneButton userButton; // Static - accessed from an interrupt
 #endif
 #ifdef BUTTON_PIN_ALT

src/Power.cpp

@@ -251,7 +251,6 @@ class AnalogBatteryLevel : public HasBatteryLevel
 #if HAS_TELEMETRY && !defined(ARCH_PORTDUINO) && !defined(ARCH_STM32WL) && !defined(HAS_PMU) &&                                  \
     !MESHTASTIC_EXCLUDE_ENVIRONMENTAL_SENSOR
         if (hasINA()) {
-            LOG_DEBUG("Use INA on I2C addr 0x%x for device battery voltage", config.power.device_battery_ina_address);
             return getINAVoltage();
         }
 #endif
@@ -271,7 +270,7 @@ class AnalogBatteryLevel : public HasBatteryLevel
             config.power.adc_multiplier_override > 0 ? config.power.adc_multiplier_override : ADC_MULTIPLIER;
         // Do not call analogRead() often.
         const uint32_t min_read_interval = 5000;
-        if (!Throttle::isWithinTimespanMs(last_read_time_ms, min_read_interval)) {
+        if (!initial_read_done || !Throttle::isWithinTimespanMs(last_read_time_ms, min_read_interval)) {
             last_read_time_ms = millis();
 
             uint32_t raw = 0;
@@ -614,7 +613,7 @@ void Power::shutdown()
 #ifdef PIN_LED3
     ledOff(PIN_LED3);
 #endif
-    doDeepSleep(DELAY_FOREVER, false);
+    doDeepSleep(DELAY_FOREVER, false, false);
 #endif
 }
 

src/PowerFSM.cpp

@@ -55,9 +55,14 @@ static void sdsEnter()
 {
     LOG_DEBUG("State: SDS");
     // FIXME - make sure GPS and LORA radio are off first - because we want close to zero current draw
-    doDeepSleep(Default::getConfiguredOrDefaultMs(config.power.sds_secs), false);
+    doDeepSleep(Default::getConfiguredOrDefaultMs(config.power.sds_secs), false, false);
 }
 
+static void lowBattSDSEnter()
+{
+    LOG_DEBUG("State: Lower batt SDS");
+    doDeepSleep(Default::getConfiguredOrDefaultMs(config.power.sds_secs), false, true);
+}
 extern Power *power;
 
 static void shutdownEnter()
@@ -247,6 +252,7 @@ static void bootEnter()
 
 State stateSHUTDOWN(shutdownEnter, NULL, NULL, "SHUTDOWN");
 State stateSDS(sdsEnter, NULL, NULL, "SDS");
+State stateLowBattSDS(lowBattSDSEnter, NULL, NULL, "SDS");
 State stateLS(lsEnter, lsIdle, lsExit, "LS");
 State stateNB(nbEnter, NULL, NULL, "NB");
 State stateDARK(darkEnter, NULL, NULL, "DARK");
@@ -291,12 +297,12 @@ void PowerFSM_setup()
                             "Press"); // Allow button to work while in serial API
 
     // Handle critically low power battery by forcing deep sleep
-    powerFSM.add_transition(&stateBOOT, &stateSDS, EVENT_LOW_BATTERY, NULL, "LowBat");
+    powerFSM.add_transition(&stateBOOT, &stateLowBattSDS, EVENT_LOW_BATTERY, NULL, "LowBat");
-    powerFSM.add_transition(&stateLS, &stateSDS, EVENT_LOW_BATTERY, NULL, "LowBat");
+    powerFSM.add_transition(&stateLS, &stateLowBattSDS, EVENT_LOW_BATTERY, NULL, "LowBat");
-    powerFSM.add_transition(&stateNB, &stateSDS, EVENT_LOW_BATTERY, NULL, "LowBat");
+    powerFSM.add_transition(&stateNB, &stateLowBattSDS, EVENT_LOW_BATTERY, NULL, "LowBat");
-    powerFSM.add_transition(&stateDARK, &stateSDS, EVENT_LOW_BATTERY, NULL, "LowBat");
+    powerFSM.add_transition(&stateDARK, &stateLowBattSDS, EVENT_LOW_BATTERY, NULL, "LowBat");
-    powerFSM.add_transition(&stateON, &stateSDS, EVENT_LOW_BATTERY, NULL, "LowBat");
+    powerFSM.add_transition(&stateON, &stateLowBattSDS, EVENT_LOW_BATTERY, NULL, "LowBat");
-    powerFSM.add_transition(&stateSERIAL, &stateSDS, EVENT_LOW_BATTERY, NULL, "LowBat");
+    powerFSM.add_transition(&stateSERIAL, &stateLowBattSDS, EVENT_LOW_BATTERY, NULL, "LowBat");
 
     // Handle being told to power off
     powerFSM.add_transition(&stateBOOT, &stateSHUTDOWN, EVENT_SHUTDOWN, NULL, "Shutdown");

src/mesh/FloodingRouter.cpp

@@ -29,6 +29,17 @@ bool FloodingRouter::shouldFilterReceived(const meshtastic_MeshPacket *p)
             if (Router::cancelSending(p->from, p->id))
                 txRelayCanceled++;
         }
+
+        /* If the original transmitter is doing retransmissions (hopStart equals hopLimit) for a reliable transmission, e.g., when
+        the ACK got lost, we will handle the packet again to make sure it gets an ACK to its packet. */
+        bool isRepeated = p->hop_start > 0 && p->hop_start == p->hop_limit;
+        if (isRepeated) {
+            LOG_DEBUG("Repeated reliable tx");
+            if (!perhapsRebroadcast(p) && isToUs(p) && p->want_ack) {
+                sendAckNak(meshtastic_Routing_Error_NONE, getFrom(p), p->id, p->channel, 0);
+            }
+        }
+
         return true;
     }
 
@@ -41,14 +52,8 @@ bool FloodingRouter::isRebroadcaster()
            config.device.rebroadcast_mode != meshtastic_Config_DeviceConfig_RebroadcastMode_NONE;
 }
 
-void FloodingRouter::sniffReceived(const meshtastic_MeshPacket *p, const meshtastic_Routing *c)
+bool FloodingRouter::perhapsRebroadcast(const meshtastic_MeshPacket *p)
 {
-    bool isAckorReply = (p->which_payload_variant == meshtastic_MeshPacket_decoded_tag) && (p->decoded.request_id != 0);
-    if (isAckorReply && !isToUs(p) && !isBroadcast(p->to)) {
-        // do not flood direct message that is ACKed or replied to
-        LOG_DEBUG("Rxd an ACK/reply not for me, cancel rebroadcast");
-        Router::cancelSending(p->to, p->decoded.request_id); // cancel rebroadcast for this DM
-    }
     if (!isToUs(p) && (p->hop_limit > 0) && !isFromUs(p)) {
         if (p->id != 0) {
             if (isRebroadcaster()) {
@@ -67,6 +72,8 @@ void FloodingRouter::sniffReceived(const meshtastic_MeshPacket *p, const meshtas
                 // Note: we are careful to resend using the original senders node id
                 // We are careful not to call our hooked version of send() - because we don't want to check this again
                 Router::send(tosend);
+
+                return true;
             } else {
                 LOG_DEBUG("No rebroadcast: Role = CLIENT_MUTE or Rebroadcast Mode = NONE");
             }
@@ -74,6 +81,21 @@ void FloodingRouter::sniffReceived(const meshtastic_MeshPacket *p, const meshtas
             LOG_DEBUG("Ignore 0 id broadcast");
         }
     }
+
+    return false;
+}
+
+void FloodingRouter::sniffReceived(const meshtastic_MeshPacket *p, const meshtastic_Routing *c)
+{
+    bool isAckorReply = (p->which_payload_variant == meshtastic_MeshPacket_decoded_tag) && (p->decoded.request_id != 0);
+    if (isAckorReply && !isToUs(p) && !isBroadcast(p->to)) {
+        // do not flood direct message that is ACKed or replied to
+        LOG_DEBUG("Rxd an ACK/reply not for me, cancel rebroadcast");
+        Router::cancelSending(p->to, p->decoded.request_id); // cancel rebroadcast for this DM
+    }
+
+    perhapsRebroadcast(p);
+
     // handle the packet as normal
     Router::sniffReceived(p, c);
-}
+}

src/mesh/FloodingRouter.h

@@ -31,6 +31,10 @@ class FloodingRouter : public Router, protected PacketHistory
   private:
     bool isRebroadcaster();
 
+    /** Check if we should rebroadcast this packet, and do so if needed
+     * @return true if rebroadcasted */
+    bool perhapsRebroadcast(const meshtastic_MeshPacket *p);
+
   public:
     /**
      * Constructor

src/mesh/NodeDB.cpp

@@ -247,6 +247,31 @@ NodeDB::NodeDB()
         config.position.gps_mode = meshtastic_Config_PositionConfig_GpsMode_ENABLED;
         config.position.gps_enabled = 0;
     }
+#ifdef USERPREFS_FIXED_GPS
+    if (myNodeInfo.reboot_count == 1) { // Check if First boot ever or after Factory Reset.
+        meshtastic_Position fixedGPS = meshtastic_Position_init_default;
+#ifdef USERPREFS_FIXED_GPS_LAT
+        fixedGPS.latitude_i = (int32_t)(USERPREFS_FIXED_GPS_LAT * 1e7);
+        fixedGPS.has_latitude_i = true;
+#endif
+#ifdef USERPREFS_FIXED_GPS_LON
+        fixedGPS.longitude_i = (int32_t)(USERPREFS_FIXED_GPS_LON * 1e7);
+        fixedGPS.has_longitude_i = true;
+#endif
+#ifdef USERPREFS_FIXED_GPS_ALT
+        fixedGPS.altitude = USERPREFS_FIXED_GPS_ALT;
+        fixedGPS.has_altitude = true;
+#endif
+#if defined(USERPREFS_FIXED_GPS_LAT) && defined(USERPREFS_FIXED_GPS_LON)
+        fixedGPS.location_source = meshtastic_Position_LocSource_LOC_MANUAL;
+        config.has_position = true;
+        info->has_position = true;
+        info->position = TypeConversions::ConvertToPositionLite(fixedGPS);
+        nodeDB->setLocalPosition(fixedGPS);
+        config.position.fixed_position = true;
+#endif
+    }
+#endif
     saveToDisk(saveWhat);
 }
 
@@ -446,8 +471,13 @@ void NodeDB::installDefaultConfig(bool preserveKey = false)
 #else
     bool hasScreen = screen_found.port != ScanI2C::I2CPort::NO_I2C;
 #endif
+#ifdef USERPREFS_FIXED_BLUETOOTH
+    config.bluetooth.fixed_pin = USERPREFS_FIXED_BLUETOOTH;
+    config.bluetooth.mode = meshtastic_Config_BluetoothConfig_PairingMode_FIXED_PIN;
+#else
     config.bluetooth.mode = hasScreen ? meshtastic_Config_BluetoothConfig_PairingMode_RANDOM_PIN
                                       : meshtastic_Config_BluetoothConfig_PairingMode_FIXED_PIN;
+#endif
     // for backward compat, default position flags are ALT+MSL
     config.position.position_flags =
         (meshtastic_Config_PositionConfig_PositionFlags_ALTITUDE | meshtastic_Config_PositionConfig_PositionFlags_ALTITUDE_MSL |
@@ -803,7 +833,7 @@ void NodeDB::loadFromDisk()
     // disk we will still factoryReset to restore things.
 
     // static DeviceState scratch; We no longer read into a tempbuf because this structure is 15KB of valuable RAM
-    auto state = loadProto(prefFileName, sizeof(meshtastic_DeviceState) + MAX_NUM_NODES * sizeof(meshtastic_NodeInfo),
+    auto state = loadProto(prefFileName, sizeof(meshtastic_DeviceState) + MAX_NUM_NODES_FS * sizeof(meshtastic_NodeInfo),
                            sizeof(meshtastic_DeviceState), &meshtastic_DeviceState_msg, &devicestate);
 
     // See https://github.com/meshtastic/firmware/issues/4184#issuecomment-2269390786
@@ -822,6 +852,10 @@ void NodeDB::loadFromDisk()
         meshNodes = &devicestate.node_db_lite;
         numMeshNodes = devicestate.node_db_lite.size();
     }
+    if (numMeshNodes > MAX_NUM_NODES) {
+        LOG_WARN("Node count %d exceeds MAX_NUM_NODES %d, truncating", numMeshNodes, MAX_NUM_NODES);
+        numMeshNodes = MAX_NUM_NODES;
+    }
     meshNodes->resize(MAX_NUM_NODES);
 
     state = loadProto(configFileName, meshtastic_LocalConfig_size, sizeof(meshtastic_LocalConfig), &meshtastic_LocalConfig_msg,
@@ -1246,12 +1280,12 @@ meshtastic_NodeInfoLite *NodeDB::getOrCreateMeshNode(NodeNum n)
             int oldestBoringIndex = -1;
             for (int i = 1; i < numMeshNodes; i++) {
                 // Simply the oldest non-favorite node
-                if (!meshNodes->at(i).is_favorite && meshNodes->at(i).last_heard < oldest) {
+                if (!meshNodes->at(i).is_favorite && !meshNodes->at(i).is_ignored && meshNodes->at(i).last_heard < oldest) {
                     oldest = meshNodes->at(i).last_heard;
                     oldestIndex = i;
                 }
                 // The oldest "boring" node
-                if (!meshNodes->at(i).is_favorite && meshNodes->at(i).user.public_key.size == 0 &&
+                if (!meshNodes->at(i).is_favorite && !meshNodes->at(i).is_ignored && meshNodes->at(i).user.public_key.size == 0 &&
                     meshNodes->at(i).last_heard < oldestBoring) {
                     oldestBoring = meshNodes->at(i).last_heard;
                     oldestBoringIndex = i;

src/mesh/PacketHistory.cpp

@@ -38,13 +38,6 @@ bool PacketHistory::wasSeenRecently(const meshtastic_MeshPacket *p, bool withUpd
         seenRecently = false;
     }
 
-    /* If the original transmitter is doing retransmissions (hopStart equals hopLimit) for a reliable transmission, e.g., when the
-       ACK got lost, we will handle the packet again to make sure it gets an ACK/response to its packet. */
-    if (seenRecently && p->hop_start > 0 && p->hop_start == p->hop_limit) {
-        LOG_DEBUG("Repeated reliable tx");
-        seenRecently = false;
-    }
-
     if (seenRecently) {
         LOG_DEBUG("Found existing packet record for fr=0x%x,to=0x%x,id=0x%x", p->from, p->to, p->id);
     }

src/mesh/ReliableRouter.cpp

@@ -176,9 +176,9 @@ bool ReliableRouter::stopRetransmission(GlobalPacketId key)
         if (old->numRetransmissions < NUM_RETRANSMISSIONS - 1) {
             // remove the 'original' (identified by originator and packet->id) from the txqueue and free it
             cancelSending(getFrom(p), p->id);
-            // now free the pooled copy for retransmission too
-            packetPool.release(p);
         }
+        // now free the pooled copy for retransmission too
+        packetPool.release(p);
         auto numErased = pending.erase(key);
         assert(numErased == 1);
         return true;

src/mesh/Router.cpp

@@ -651,6 +651,13 @@ void Router::perhapsHandleReceived(meshtastic_MeshPacket *p)
         return;
     }
 
+    meshtastic_NodeInfoLite *node = nodeDB->getMeshNode(p->from);
+    if (node != NULL && node->is_ignored) {
+        LOG_DEBUG("Ignore msg, 0x%x is ignored", p->from);
+        packetPool.release(p);
+        return;
+    }
+
     if (p->from == NODENUM_BROADCAST) {
         LOG_DEBUG("Ignore msg from broadcast address");
         packetPool.release(p);

src/mesh/TypeConversions.cpp

@@ -12,6 +12,7 @@ meshtastic_NodeInfo TypeConversions::ConvertToNodeInfo(const meshtastic_NodeInfo
     info.channel = lite->channel;
     info.via_mqtt = lite->via_mqtt;
     info.is_favorite = lite->is_favorite;
+    info.is_ignored = lite->is_ignored;
 
     if (lite->has_hops_away) {
         info.has_hops_away = true;

src/mesh/generated/meshtastic/admin.pb.h

@@ -180,6 +180,10 @@ typedef struct _meshtastic_AdminMessage {
         meshtastic_DeviceUIConfig get_ui_config_response;
         /* Tell the node to store UI data persistently. */
         meshtastic_DeviceUIConfig store_ui_config;
+        /* Set specified node-num to be ignored on the NodeDB on the device */
+        uint32_t set_ignored_node;
+        /* Set specified node-num to be un-ignored on the NodeDB on the device */
+        uint32_t remove_ignored_node;
         /* Begins an edit transaction for config, module config, owner, and channel settings changes
      This will delay the standard *implicit* save to the file system and subsequent reboot behavior until committed (commit_edit_settings) */
         bool begin_edit_settings;
@@ -279,6 +283,8 @@ extern "C" {
 #define meshtastic_AdminMessage_get_ui_config_request_tag 44
 #define meshtastic_AdminMessage_get_ui_config_response_tag 45
 #define meshtastic_AdminMessage_store_ui_config_tag 46
+#define meshtastic_AdminMessage_set_ignored_node_tag 47
+#define meshtastic_AdminMessage_remove_ignored_node_tag 48
 #define meshtastic_AdminMessage_begin_edit_settings_tag 64
 #define meshtastic_AdminMessage_commit_edit_settings_tag 65
 #define meshtastic_AdminMessage_factory_reset_device_tag 94
@@ -329,6 +335,8 @@ X(a, STATIC,   ONEOF,    FIXED32,  (payload_variant,set_time_only,set_time_only)
 X(a, STATIC,   ONEOF,    BOOL,     (payload_variant,get_ui_config_request,get_ui_config_request),  44) \
 X(a, STATIC,   ONEOF,    MESSAGE,  (payload_variant,get_ui_config_response,get_ui_config_response),  45) \
 X(a, STATIC,   ONEOF,    MESSAGE,  (payload_variant,store_ui_config,store_ui_config),  46) \
+X(a, STATIC,   ONEOF,    UINT32,   (payload_variant,set_ignored_node,set_ignored_node),  47) \
+X(a, STATIC,   ONEOF,    UINT32,   (payload_variant,remove_ignored_node,remove_ignored_node),  48) \
 X(a, STATIC,   ONEOF,    BOOL,     (payload_variant,begin_edit_settings,begin_edit_settings),  64) \
 X(a, STATIC,   ONEOF,    BOOL,     (payload_variant,commit_edit_settings,commit_edit_settings),  65) \
 X(a, STATIC,   ONEOF,    INT32,    (payload_variant,factory_reset_device,factory_reset_device),  94) \

src/mesh/generated/meshtastic/deviceonly.pb.h

@@ -87,6 +87,9 @@ typedef struct _meshtastic_NodeInfoLite {
     /* True if node is in our favorites list
  Persists between NodeDB internal clean ups */
     bool is_favorite;
+    /* True if node is in our ignored list
+ Persists between NodeDB internal clean ups */
+    bool is_ignored;
 } meshtastic_NodeInfoLite;
 
 /* This message is never sent over the wire, but it is used for serializing DB
@@ -150,12 +153,12 @@ extern "C" {
 /* Initializer values for message structs */
 #define meshtastic_PositionLite_init_default     {0, 0, 0, 0, _meshtastic_Position_LocSource_MIN}
 #define meshtastic_UserLite_init_default         {{0}, "", "", _meshtastic_HardwareModel_MIN, 0, _meshtastic_Config_DeviceConfig_Role_MIN, {0, {0}}}
-#define meshtastic_NodeInfoLite_init_default     {0, false, meshtastic_UserLite_init_default, false, meshtastic_PositionLite_init_default, 0, 0, false, meshtastic_DeviceMetrics_init_default, 0, 0, false, 0, 0}
+#define meshtastic_NodeInfoLite_init_default     {0, false, meshtastic_UserLite_init_default, false, meshtastic_PositionLite_init_default, 0, 0, false, meshtastic_DeviceMetrics_init_default, 0, 0, false, 0, 0, 0}
 #define meshtastic_DeviceState_init_default      {false, meshtastic_MyNodeInfo_init_default, false, meshtastic_User_init_default, 0, {meshtastic_MeshPacket_init_default}, false, meshtastic_MeshPacket_init_default, 0, 0, 0, false, meshtastic_MeshPacket_init_default, 0, {meshtastic_NodeRemoteHardwarePin_init_default, meshtastic_NodeRemoteHardwarePin_init_default, meshtastic_NodeRemoteHardwarePin_init_default, meshtastic_NodeRemoteHardwarePin_init_default, meshtastic_NodeRemoteHardwarePin_init_default, meshtastic_NodeRemoteHardwarePin_init_default, meshtastic_NodeRemoteHardwarePin_init_default, meshtastic_NodeRemoteHardwarePin_init_default, meshtastic_NodeRemoteHardwarePin_init_default, meshtastic_NodeRemoteHardwarePin_init_default, meshtastic_NodeRemoteHardwarePin_init_default, meshtastic_NodeRemoteHardwarePin_init_default}, {0}}
 #define meshtastic_ChannelFile_init_default      {0, {meshtastic_Channel_init_default, meshtastic_Channel_init_default, meshtastic_Channel_init_default, meshtastic_Channel_init_default, meshtastic_Channel_init_default, meshtastic_Channel_init_default, meshtastic_Channel_init_default, meshtastic_Channel_init_default}, 0}
 #define meshtastic_PositionLite_init_zero        {0, 0, 0, 0, _meshtastic_Position_LocSource_MIN}
 #define meshtastic_UserLite_init_zero            {{0}, "", "", _meshtastic_HardwareModel_MIN, 0, _meshtastic_Config_DeviceConfig_Role_MIN, {0, {0}}}
-#define meshtastic_NodeInfoLite_init_zero        {0, false, meshtastic_UserLite_init_zero, false, meshtastic_PositionLite_init_zero, 0, 0, false, meshtastic_DeviceMetrics_init_zero, 0, 0, false, 0, 0}
+#define meshtastic_NodeInfoLite_init_zero        {0, false, meshtastic_UserLite_init_zero, false, meshtastic_PositionLite_init_zero, 0, 0, false, meshtastic_DeviceMetrics_init_zero, 0, 0, false, 0, 0, 0}
 #define meshtastic_DeviceState_init_zero         {false, meshtastic_MyNodeInfo_init_zero, false, meshtastic_User_init_zero, 0, {meshtastic_MeshPacket_init_zero}, false, meshtastic_MeshPacket_init_zero, 0, 0, 0, false, meshtastic_MeshPacket_init_zero, 0, {meshtastic_NodeRemoteHardwarePin_init_zero, meshtastic_NodeRemoteHardwarePin_init_zero, meshtastic_NodeRemoteHardwarePin_init_zero, meshtastic_NodeRemoteHardwarePin_init_zero, meshtastic_NodeRemoteHardwarePin_init_zero, meshtastic_NodeRemoteHardwarePin_init_zero, meshtastic_NodeRemoteHardwarePin_init_zero, meshtastic_NodeRemoteHardwarePin_init_zero, meshtastic_NodeRemoteHardwarePin_init_zero, meshtastic_NodeRemoteHardwarePin_init_zero, meshtastic_NodeRemoteHardwarePin_init_zero, meshtastic_NodeRemoteHardwarePin_init_zero}, {0}}
 #define meshtastic_ChannelFile_init_zero         {0, {meshtastic_Channel_init_zero, meshtastic_Channel_init_zero, meshtastic_Channel_init_zero, meshtastic_Channel_init_zero, meshtastic_Channel_init_zero, meshtastic_Channel_init_zero, meshtastic_Channel_init_zero, meshtastic_Channel_init_zero}, 0}
 
@@ -182,6 +185,7 @@ extern "C" {
 #define meshtastic_NodeInfoLite_via_mqtt_tag     8
 #define meshtastic_NodeInfoLite_hops_away_tag    9
 #define meshtastic_NodeInfoLite_is_favorite_tag  10
+#define meshtastic_NodeInfoLite_is_ignored_tag   11
 #define meshtastic_DeviceState_my_node_tag       2
 #define meshtastic_DeviceState_owner_tag         3
 #define meshtastic_DeviceState_receive_queue_tag 5
@@ -226,7 +230,8 @@ X(a, STATIC,   OPTIONAL, MESSAGE,  device_metrics,    6) \
 X(a, STATIC,   SINGULAR, UINT32,   channel,           7) \
 X(a, STATIC,   SINGULAR, BOOL,     via_mqtt,          8) \
 X(a, STATIC,   OPTIONAL, UINT32,   hops_away,         9) \
-X(a, STATIC,   SINGULAR, BOOL,     is_favorite,      10)
+X(a, STATIC,   SINGULAR, BOOL,     is_favorite,      10) \
+X(a, STATIC,   SINGULAR, BOOL,     is_ignored,       11)
 #define meshtastic_NodeInfoLite_CALLBACK NULL
 #define meshtastic_NodeInfoLite_DEFAULT NULL
 #define meshtastic_NodeInfoLite_user_MSGTYPE meshtastic_UserLite
@@ -279,7 +284,7 @@ extern const pb_msgdesc_t meshtastic_ChannelFile_msg;
 /* meshtastic_DeviceState_size depends on runtime parameters */
 #define MESHTASTIC_MESHTASTIC_DEVICEONLY_PB_H_MAX_SIZE meshtastic_ChannelFile_size
 #define meshtastic_ChannelFile_size              718
-#define meshtastic_NodeInfoLite_size             183
+#define meshtastic_NodeInfoLite_size             185
 #define meshtastic_PositionLite_size             28
 #define meshtastic_UserLite_size                 96
 

src/mesh/generated/meshtastic/mesh.pb.h

@@ -797,6 +797,9 @@ typedef struct _meshtastic_NodeInfo {
     /* True if node is in our favorites list
  Persists between NodeDB internal clean ups */
     bool is_favorite;
+    /* True if node is in our ignored list
+ Persists between NodeDB internal clean ups */
+    bool is_ignored;
 } meshtastic_NodeInfo;
 
 typedef PB_BYTES_ARRAY_T(16) meshtastic_MyNodeInfo_device_id_t;
@@ -1157,7 +1160,7 @@ extern "C" {
 #define meshtastic_Waypoint_init_default         {0, false, 0, false, 0, 0, 0, "", "", 0}
 #define meshtastic_MqttClientProxyMessage_init_default {"", 0, {{0, {0}}}, 0}
 #define meshtastic_MeshPacket_init_default       {0, 0, 0, 0, {meshtastic_Data_init_default}, 0, 0, 0, 0, 0, _meshtastic_MeshPacket_Priority_MIN, 0, _meshtastic_MeshPacket_Delayed_MIN, 0, 0, {0, {0}}, 0}
-#define meshtastic_NodeInfo_init_default         {0, false, meshtastic_User_init_default, false, meshtastic_Position_init_default, 0, 0, false, meshtastic_DeviceMetrics_init_default, 0, 0, false, 0, 0}
+#define meshtastic_NodeInfo_init_default         {0, false, meshtastic_User_init_default, false, meshtastic_Position_init_default, 0, 0, false, meshtastic_DeviceMetrics_init_default, 0, 0, false, 0, 0, 0}
 #define meshtastic_MyNodeInfo_init_default       {0, 0, 0, {0, {0}}, ""}
 #define meshtastic_LogRecord_init_default        {"", 0, "", _meshtastic_LogRecord_Level_MIN}
 #define meshtastic_QueueStatus_init_default      {0, 0, 0, 0}
@@ -1182,7 +1185,7 @@ extern "C" {
 #define meshtastic_Waypoint_init_zero            {0, false, 0, false, 0, 0, 0, "", "", 0}
 #define meshtastic_MqttClientProxyMessage_init_zero {"", 0, {{0, {0}}}, 0}
 #define meshtastic_MeshPacket_init_zero          {0, 0, 0, 0, {meshtastic_Data_init_zero}, 0, 0, 0, 0, 0, _meshtastic_MeshPacket_Priority_MIN, 0, _meshtastic_MeshPacket_Delayed_MIN, 0, 0, {0, {0}}, 0}
-#define meshtastic_NodeInfo_init_zero            {0, false, meshtastic_User_init_zero, false, meshtastic_Position_init_zero, 0, 0, false, meshtastic_DeviceMetrics_init_zero, 0, 0, false, 0, 0}
+#define meshtastic_NodeInfo_init_zero            {0, false, meshtastic_User_init_zero, false, meshtastic_Position_init_zero, 0, 0, false, meshtastic_DeviceMetrics_init_zero, 0, 0, false, 0, 0, 0}
 #define meshtastic_MyNodeInfo_init_zero          {0, 0, 0, {0, {0}}, ""}
 #define meshtastic_LogRecord_init_zero           {"", 0, "", _meshtastic_LogRecord_Level_MIN}
 #define meshtastic_QueueStatus_init_zero         {0, 0, 0, 0}
@@ -1287,6 +1290,7 @@ extern "C" {
 #define meshtastic_NodeInfo_via_mqtt_tag         8
 #define meshtastic_NodeInfo_hops_away_tag        9
 #define meshtastic_NodeInfo_is_favorite_tag      10
+#define meshtastic_NodeInfo_is_ignored_tag       11
 #define meshtastic_MyNodeInfo_my_node_num_tag    1
 #define meshtastic_MyNodeInfo_reboot_count_tag   8
 #define meshtastic_MyNodeInfo_min_app_version_tag 11
@@ -1485,7 +1489,8 @@ X(a, STATIC,   OPTIONAL, MESSAGE,  device_metrics,    6) \
 X(a, STATIC,   SINGULAR, UINT32,   channel,           7) \
 X(a, STATIC,   SINGULAR, BOOL,     via_mqtt,          8) \
 X(a, STATIC,   OPTIONAL, UINT32,   hops_away,         9) \
-X(a, STATIC,   SINGULAR, BOOL,     is_favorite,      10)
+X(a, STATIC,   SINGULAR, BOOL,     is_favorite,      10) \
+X(a, STATIC,   SINGULAR, BOOL,     is_ignored,       11)
 #define meshtastic_NodeInfo_CALLBACK NULL
 #define meshtastic_NodeInfo_DEFAULT NULL
 #define meshtastic_NodeInfo_user_MSGTYPE meshtastic_User
@@ -1724,7 +1729,7 @@ extern const pb_msgdesc_t meshtastic_ChunkedPayloadResponse_msg;
 #define meshtastic_MyNodeInfo_size               77
 #define meshtastic_NeighborInfo_size             258
 #define meshtastic_Neighbor_size                 22
-#define meshtastic_NodeInfo_size                 317
+#define meshtastic_NodeInfo_size                 319
 #define meshtastic_NodeRemoteHardwarePin_size    29
 #define meshtastic_Position_size                 144
 #define meshtastic_QueueStatus_size              23

src/mesh/mesh-pb-constants.h

@@ -1,6 +1,7 @@
 #pragma once
 #include <vector>
 
+#include "architecture.h"
 #include "mesh/generated/meshtastic/admin.pb.h"
 #include "mesh/generated/meshtastic/deviceonly.pb.h"
 #include "mesh/generated/meshtastic/localonly.pb.h"
@@ -20,8 +21,14 @@
 
 /// max number of nodes allowed in the mesh
 #ifndef MAX_NUM_NODES
+#ifdef ARCH_NRF52
+#define MAX_NUM_NODES 80
+#else
 #define MAX_NUM_NODES 100
 #endif
+#endif
+
+#define MAX_NUM_NODES_FS 100
 
 /// Max number of channels allowed
 #define MAX_NUM_CHANNELS (member_size(meshtastic_ChannelFile, channels) / member_size(meshtastic_ChannelFile, channels[0]))

src/modules/AdminModule.cpp

@@ -295,6 +295,28 @@ bool AdminModule::handleReceivedProtobuf(const meshtastic_MeshPacket &mp, meshta
         }
         break;
     }
+    case meshtastic_AdminMessage_set_ignored_node_tag: {
+        LOG_INFO("Client received set_ignored_node command");
+        meshtastic_NodeInfoLite *node = nodeDB->getMeshNode(r->set_ignored_node);
+        if (node != NULL) {
+            node->is_ignored = true;
+            node->has_device_metrics = false;
+            node->has_position = false;
+            node->user.public_key.size = 0;
+            node->user.public_key.bytes[0] = 0;
+            saveChanges(SEGMENT_DEVICESTATE, false);
+        }
+        break;
+    }
+    case meshtastic_AdminMessage_remove_ignored_node_tag: {
+        LOG_INFO("Client received remove_ignored_node command");
+        meshtastic_NodeInfoLite *node = nodeDB->getMeshNode(r->remove_ignored_node);
+        if (node != NULL) {
+            node->is_ignored = false;
+            saveChanges(SEGMENT_DEVICESTATE, false);
+        }
+        break;
+    }
     case meshtastic_AdminMessage_set_fixed_position_tag: {
         LOG_INFO("Client received set_fixed_position command");
         meshtastic_NodeInfoLite *node = nodeDB->getMeshNode(nodeDB->getNodeNum());
@@ -516,6 +538,11 @@ void AdminModule::handleSetConfig(const meshtastic_Config &c)
             requiresReboot = false;
         }
         config.power = c.payload_variant.power;
+        if (c.payload_variant.power.on_battery_shutdown_after_secs > 0 &&
+            c.payload_variant.power.on_battery_shutdown_after_secs < 30) {
+            LOG_WARN("Tried to set on_battery_shutdown_after_secs too low, set to min 30 seconds");
+            config.power.on_battery_shutdown_after_secs = 30;
+        }
         break;
     case meshtastic_Config_network_tag:
         LOG_INFO("Set config: WiFi");

src/modules/DetectionSensorModule.cpp

@@ -58,7 +58,7 @@ int32_t DetectionSensorModule::runOnce()
     // moduleConfig.detection_sensor.minimum_broadcast_secs = 30;
     // moduleConfig.detection_sensor.state_broadcast_secs = 120;
     // moduleConfig.detection_sensor.detection_trigger_type =
-    //          meshtastic_ModuleConfig_DetectionSensorConfig_TriggerType_LOGIC_HIGH;
+    // meshtastic_ModuleConfig_DetectionSensorConfig_TriggerType_LOGIC_HIGH;
     // strcpy(moduleConfig.detection_sensor.name, "Motion");
 
     if (moduleConfig.detection_sensor.enabled == false)
@@ -130,9 +130,12 @@ void DetectionSensorModule::sendDetectionMessage()
         p->decoded.payload.bytes[p->decoded.payload.size + 1] = '\0'; // Bell character
         p->decoded.payload.size++;
     }
-    LOG_INFO("Send message id=%d, dest=%x, msg=%.*s", p->id, p->to, p->decoded.payload.size, p->decoded.payload.bytes);
     lastSentToMesh = millis();
-    service->sendToMesh(p);
+    if (!channels.isDefaultChannel(0)) {
+        LOG_INFO("Send message id=%d, dest=%x, msg=%.*s", p->id, p->to, p->decoded.payload.size, p->decoded.payload.bytes);
+        service->sendToMesh(p);
+    } else
+        LOG_ERROR("Message not allow on Public channel");
     delete[] message;
 }
 
@@ -140,14 +143,16 @@ void DetectionSensorModule::sendCurrentStateMessage(bool state)
 {
     char *message = new char[40];
     sprintf(message, "%s state: %i", moduleConfig.detection_sensor.name, state);
-
     meshtastic_MeshPacket *p = allocDataPacket();
     p->want_ack = false;
     p->decoded.payload.size = strlen(message);
     memcpy(p->decoded.payload.bytes, message, p->decoded.payload.size);
-    LOG_INFO("Send message id=%d, dest=%x, msg=%.*s", p->id, p->to, p->decoded.payload.size, p->decoded.payload.bytes);
     lastSentToMesh = millis();
-    service->sendToMesh(p);
+    if (!channels.isDefaultChannel(0)) {
+        LOG_INFO("Send message id=%d, dest=%x, msg=%.*s", p->id, p->to, p->decoded.payload.size, p->decoded.payload.bytes);
+        service->sendToMesh(p);
+    } else
+        LOG_ERROR("Message not allow on Public channel");
     delete[] message;
 }
 
@@ -156,4 +161,4 @@ bool DetectionSensorModule::hasDetectionEvent()
     bool currentState = digitalRead(moduleConfig.detection_sensor.monitor_pin);
     // LOG_DEBUG("Detection Sensor Module: Current state: %i", currentState);
     return (moduleConfig.detection_sensor.detection_trigger_type & 1) ? currentState : !currentState;
-}
+}

src/modules/PositionModule.cpp

@@ -364,7 +364,7 @@ int32_t PositionModule::runOnce()
         sleepOnNextExecution = false;
         uint32_t nightyNightMs = Default::getConfiguredOrDefaultMs(config.position.position_broadcast_secs);
         LOG_DEBUG("Sleep for %ims, then awaking to send position again", nightyNightMs);
-        doDeepSleep(nightyNightMs, false);
+        doDeepSleep(nightyNightMs, false, false);
     }
 
     meshtastic_NodeInfoLite *node = nodeDB->getMeshNode(nodeDB->getNodeNum());

src/modules/PowerStressModule.cpp

@@ -111,7 +111,7 @@ int32_t PowerStressModule::runOnce()
                 setBluetoothEnable(true);
                 break;
             case meshtastic_PowerStressMessage_Opcode_CPU_DEEPSLEEP:
-                doDeepSleep(sleep_msec, true);
+                doDeepSleep(sleep_msec, true, true);
                 break;
             case meshtastic_PowerStressMessage_Opcode_CPU_FULLON: {
                 uint32_t start_msec = millis();

src/modules/Telemetry/EnvironmentTelemetry.cpp

@@ -74,7 +74,7 @@ int32_t EnvironmentTelemetryModule::runOnce()
         uint32_t nightyNightMs = Default::getConfiguredOrDefaultMs(moduleConfig.telemetry.environment_update_interval,
                                                                    default_telemetry_broadcast_interval_secs);
         LOG_DEBUG("Sleep for %ims, then awake to send metrics again", nightyNightMs);
-        doDeepSleep(nightyNightMs, true);
+        doDeepSleep(nightyNightMs, true, false);
     }
 
     uint32_t result = UINT32_MAX;

src/modules/Telemetry/HealthTelemetry.cpp

@@ -40,7 +40,7 @@ int32_t HealthTelemetryModule::runOnce()
         uint32_t nightyNightMs = Default::getConfiguredOrDefaultMs(moduleConfig.telemetry.health_update_interval,
                                                                    default_telemetry_broadcast_interval_secs);
         LOG_DEBUG("Sleep for %ims, then awake to send metrics again", nightyNightMs);
-        doDeepSleep(nightyNightMs, true);
+        doDeepSleep(nightyNightMs, true, false);
     }
 
     uint32_t result = UINT32_MAX;

src/modules/Telemetry/PowerTelemetry.cpp

@@ -28,7 +28,7 @@ int32_t PowerTelemetryModule::runOnce()
         uint32_t nightyNightMs = Default::getConfiguredOrDefaultMs(moduleConfig.telemetry.power_update_interval,
                                                                    default_telemetry_broadcast_interval_secs);
         LOG_DEBUG("Sleep for %ims, then awake to send metrics again", nightyNightMs);
-        doDeepSleep(nightyNightMs, true);
+        doDeepSleep(nightyNightMs, true, false);
     }
 
     uint32_t result = UINT32_MAX;

src/sleep.cpp

@@ -187,7 +187,7 @@ static void waitEnterSleep(bool skipPreflight = false)
     notifySleep.notifyObservers(NULL);
 }
 
-void doDeepSleep(uint32_t msecToWake, bool skipPreflight = false)
+void doDeepSleep(uint32_t msecToWake, bool skipPreflight = false, bool skipSaveNodeDb = false)
 {
     if (INCLUDE_vTaskSuspend && (msecToWake == portMAX_DELAY)) {
         LOG_INFO("Enter deep sleep forever");
@@ -219,7 +219,9 @@ void doDeepSleep(uint32_t msecToWake, bool skipPreflight = false)
 
     screen->doDeepSleep(); // datasheet says this will draw only 10ua
 
-    nodeDB->saveToDisk();
+    if (!skipSaveNodeDb) {
+        nodeDB->saveToDisk();
+    }
 
 #ifdef PIN_POWER_EN
     pinMode(PIN_POWER_EN, INPUT); // power off peripherals

src/sleep.h

@@ -4,7 +4,7 @@
 #include "Observer.h"
 #include "configuration.h"
 
-void doDeepSleep(uint32_t msecToWake, bool skipPreflight), cpuDeepSleep(uint32_t msecToWake);
+void doDeepSleep(uint32_t msecToWake, bool skipPreflight, bool skipSaveNodeDb), cpuDeepSleep(uint32_t msecToWake);
 
 #ifdef ARCH_ESP32
 #include "esp_sleep.h"

userPrefs.h

@@ -74,4 +74,25 @@ static unsigned char USERPREFS_ADMIN_KEY[] = {0xcd, 0xc0, 0xb4, 0x3c, 0x53, 0x24
                                        0x0c, 0x0d, 0xec, 0x85, 0x5a, 0x4c, 0xf6, 0x1a, 0x96, 0x04, 0x1a,
                                        0x3e, 0xfc, 0xbb, 0x8e, 0x33, 0x71, 0xe5, 0xfc, 0xff, 0x3c};
 */
+
+/*
+ * USERPREF_FIXED_GPS_LAT and USERPREF_FIXED_GPS_LON must be set, USERPREF_FIXED_GPS_ALT is optional
+ *
+ * Fixed GPS is Eiffel Tower, Paris, France
+ */
+// #define USERPREFS_FIXED_GPS
+// #define USERPREFS_FIXED_GPS_LAT 48.85873920
+// #define USERPREFS_FIXED_GPS_LON 2.294508368
+// #define USERPREFS_FIXED_GPS_ALT 0
+
+/*
+ * Set Fixed Bluetooth paring code
+ */
+// #define USERPREFS_FIXED_BLUETOOTH 121212
+
+/*
+ * Will overwrite BUTTON_PIN if set
+ */
+// #define USERPREFS_BUTTON_PIN 36
+
 #endif

variants/rak_wismeshtap/platformio.ini

@@ -1,7 +1,6 @@
 ; The very slick RAK wireless RAK10701 Field Tester device.  Note you will have to flash to Arduino bootloader to use this firmware.  Be aware touch is not currently working.
 [env:rak_wismeshtap]
 extends = nrf52840_base
-board_level = extra
 board = wiscore_rak4631
 build_flags = ${nrf52840_base.build_flags} -Ivariants/rak_wismeshtap -D RAK_4631
   -L "${platformio.libdeps_dir}/${this.__env__}/bsec2/src/cortex-m4/fpv4-sp-d16-hard"
@@ -10,8 +9,11 @@ build_flags = ${nrf52840_base.build_flags} -Ivariants/rak_wismeshtap -D RAK_4631
   -DEINK_WIDTH=250
   -DEINK_HEIGHT=122
   -DMESHTASTIC_EXCLUDE_WIFI=1
-  -DMESHTASTIC_EXCLUDE_EXTERNALNOTIFICATION=1
   -DMESHTASTIC_EXCLUDE_WAYPOINT=1
+  -DMESHTASTIC_EXCLUDE_DETECTIONSENSOR=1
+  -DMESHTASTIC_EXCLUDE_STOREFORWARD=1
+  -DMESHTASTIC_EXCLUDE_POWER_TELEMETRY=1
+  -DMESHTASTIC_EXCLUDE_ATAK=1
 build_src_filter = ${nrf52_base.build_src_filter} +<../variants/rak_wismeshtap> +<mesh/eth/> +<mesh/api/> +<mqtt/>
 lib_deps = 
   ${nrf52840_base.lib_deps}
@@ -24,4 +26,4 @@ lib_deps =
   beegee-tokyo/RAK14014-FT6336U @ 1.0.1
 debug_tool = jlink
 ; If not set we will default to uploading over serial (first it forces bootloader entry by talking 1200bps to cdcacm)
-;upload_protocol = jlink
+;upload_protocol = jlink

version.properties

@@ -1,4 +1,4 @@
 [VERSION]  
 major = 2
 minor = 5
-build = 12
+build = 14