pohui_pohui/firmware
1
0
Fork 0
mirror of https://github.com/meshtastic/firmware.git synced 2025-02-01 02:09:57 +00:00
Code Issues Actions 5 Packages Projects Releases Wiki Activity

Removing 1.0 legacy boards from releases and completely removing Heltec wireless capsule from support (#5436)

Browse Source 
Co-authored-by: Tom Fifield <tom@tomfifield.net>
This commit is contained in:
Ben Meadors 2024-11-25 05:14:48 -06:00 committed by GitHub
parent 37da78919a
commit 6018c0a830
No known key found for this signature in database
GPG Key ID: B5690EEEBB952194
5 changed files with 2 additions and 67 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

1
platformio.ini
View File

@ -34,7 +34,6 @@ default_envs = tbeam
;default_envs = radiomaster_900_bandit_nano
;default_envs = radiomaster_900_bandit_micro
;default_envs = radiomaster_900_bandit
;default_envs = heltec_capsule_sensor_v3
;default_envs = heltec_vision_master_t190
;default_envs = heltec_vision_master_e213
;default_envs = heltec_vision_master_e290

11
variants/heltec_capsule_sensor_v3/platformio.ini
View File

@ -1,11 +0,0 @@
[env:heltec_capsule_sensor_v3]
extends = esp32s3_base
board = heltec_wifi_lora_32_V3
board_check = true
build_flags =
${esp32s3_base.build_flags} -I variants/heltec_capsule_sensor_v3
-D HELTEC_CAPSULE_SENSOR_V3
-D GPS_POWER_TOGGLE ; comment this line to disable triple press function on the user button to turn off gps entirely.
;-D DEBUG_DISABLED ; uncomment this line to disable DEBUG output

53
variants/heltec_capsule_sensor_v3/variant.h
View File

@ -1,53 +0,0 @@
#define LED_PIN 33
#define LED_PIN2 34
#define EXT_PWR_DETECT 35
#define BUTTON_PIN 18
#define BATTERY_PIN 7 // A battery voltage measurement pin, voltage divider connected here to measure battery voltage
#define ADC_CHANNEL ADC1_GPIO7_CHANNEL
#define ADC_ATTENUATION ADC_ATTEN_DB_2_5 // lower dB for high resistance voltage divider
#define ADC_MULTIPLIER (4.9 * 1.045)
#define ADC_CTRL 36 // active HIGH, powers the voltage divider. Only on 1.1
#define ADC_CTRL_ENABLED HIGH
#undef GPS_RX_PIN
#undef GPS_TX_PIN
#define GPS_RX_PIN 5
#define GPS_TX_PIN 4
#define PIN_GPS_RESET 3
#define GPS_RESET_MODE LOW
#define PIN_GPS_PPS 1
#define PIN_GPS_EN 21
#define GPS_EN_ACTIVE HIGH
#define USE_SX1262
#define LORA_DIO0 -1 // a No connect on the SX1262 module
#define LORA_RESET 12
#define LORA_DIO1 14 // SX1262 IRQ
#define LORA_DIO2 13 // SX1262 BUSY
#define LORA_DIO3 // Not connected on PCB, but internally on the TTGO SX1262, if DIO3 is high the TXCO is enabled
#define LORA_SCK 9
#define LORA_MISO 11
#define LORA_MOSI 10
#define LORA_CS 8
#define SX126X_CS LORA_CS
#define SX126X_DIO1 LORA_DIO1
#define SX126X_BUSY LORA_DIO2
#define SX126X_RESET LORA_RESET
#define SX126X_DIO2_AS_RF_SWITCH
#define SX126X_DIO3_TCXO_VOLTAGE 1.8
#define I2C_SDA 1
#define I2C_SCL 2
#define HAS_SCREEN 0
#define SENSOR_POWER_CTRL_PIN 21
#define SENSOR_POWER_ON 1
#define PERIPHERAL_WARMUP_MS 100
#define SENSOR_GPS_CONFLICT
#define ESP32S3_WAKE_TYPE ESP_EXT1_WAKEUP_ANY_HIGH

1
variants/heltec_wireless_paper_v1/platformio.ini
View File

@ -1,5 +1,6 @@
[env:heltec-wireless-paper-v1_0]
extends = esp32s3_base
board_level = extra
board = heltec_wifi_lora_32_V3
build_flags =
${esp32s3_base.build_flags}

3
variants/heltec_wireless_tracker_V1_0/platformio.ini
View File

@ -1,14 +1,13 @@
[env:heltec-wireless-tracker-V1-0]
extends = esp32s3_base
board_level = extra
board = heltec_wireless_tracker
upload_protocol = esptool
build_flags =
${esp32s3_base.build_flags} -I variants/heltec_wireless_tracker_V1_0
-D HELTEC_TRACKER_V1_0
-D GPS_POWER_TOGGLE ; comment this line to disable triple press function on the user button to turn off gps entirely.
;-D DEBUG_DISABLED ; uncomment this line to disable DEBUG output
lib_deps =
${esp32s3_base.lib_deps}
lovyan03/LovyanGFX@^1.1.8