Increase MAX_NUM_NODES on high-flash ESP32_S3 (#6311)

arch/nrf52/nrf52.ini

@@ -17,7 +17,6 @@ build_flags =
   -DLFS_NO_ASSERT                      ; Disable LFS assertions , see https://github.com/meshtastic/firmware/pull/3818
   -DMESHTASTIC_EXCLUDE_AUDIO=1
   -DMESHTASTIC_EXCLUDE_PAXCOUNTER=1
-  -DMAX_NUM_NODES=80
 
 build_src_filter = 
   ${arduino_base.build_src_filter} -<platform/esp32/> -<platform/stm32wl> -<nimble/> -<mesh/wifi/> -<mesh/api/> -<mesh/http/> -<modules/esp32> -<platform/rp2xx0> -<mesh/eth/> -<mesh/raspihttp>

bin/device-install.bat

@@ -7,12 +7,19 @@ SET "DEBUG=0"
 SET "PYTHON="
 SET "WEB_APP=0"
 SET "TFT_BUILD=0"
-SET "TFT8=0"
+SET "BIGDB8=0"
-SET "TFT16=0"
+SET "BIGDB16=0"
 SET "ESPTOOL_BAUD=115200"
 SET "ESPTOOL_CMD="
 SET "LOGCOUNTER=0"
 
+@REM FIXME: Determine mcu from PlatformIO variant, this is unmaintainable.
+SET "S3=s3 v3 t-deck wireless-paper wireless-tracker station-g2 unphone"
+SET "C3=esp32c3"
+@REM FIXME: Determine flash size from PlatformIO variant, this is unmaintainable.
+SET "BIGDB_8MB=picomputer-s3 unphone seeed-sensecap-indicator crowpanel-esp32s3 heltec_capsule_sensor_v3 heltec-v3 heltec-vision-master-e213 heltec-vision-master-e290 heltec-vision-master-t190 heltec-wireless-paper heltec-wireless-tracker heltec-wsl-v3 icarus seeed-xiao-s3 tbeam-s3-core tracksenger"
+SET "BIGDB_16MB=t-deck mesh-tab t-energy-s3 dreamcatcher ESP32-S3-Pico m5stack-cores3 station-g2 t-eth-elite t-watch-s3"
+
 GOTO getopts
 :help
 ECHO Flash image file to device, but first erasing and writing system information.
@@ -134,44 +141,36 @@ IF NOT "!FILENAME:-tft-=!"=="!FILENAME!" (
         CALL :LOG_MESSAGE ERROR "Cannot enable WebUI (--web) and MUI." & GOTO eof
     )
     SET "TFT_BUILD=1"
-    GOTO tft
 ) ELSE (
     CALL :LOG_MESSAGE DEBUG "We are NOT working with a *-tft-* file. !FILENAME!"
-    GOTO no_tft
 )
 
-:tft
+FOR %%a IN (%BIGDB_8MB%) DO (
-SET "TFT8MB=picomputer-s3 unphone seeed-sensecap-indicator"
-FOR %%a IN (%TFT8MB%) DO (
     IF NOT "!FILENAME:%%a=!"=="!FILENAME!" (
-        @REM We are working with any of %TFT8MB%.
+        @REM We are working with any of %BIGDB_8MB%.
-        SET "TFT8=1"
+        SET "BIGDB8=1"
-        GOTO end_loop_tft8mb
+        GOTO end_loop_bigdb_8mb
     )
 )
-:end_loop_tft8mb
+:end_loop_bigdb_8mb
 
-SET "TFT16MB=t-deck"
+FOR %%a IN (%BIGDB_16MB%) DO (
-FOR %%a IN (%TFT16MB%) DO (
     IF NOT "!FILENAME:%%a=!"=="!FILENAME!" (
-        @REM We are working with any of %TFT16MB%.
+        @REM We are working with any of %BIGDB_16MB%.
-        SET "TFT16=1"
+        SET "BIGDB16=1"
-        GOTO end_loop_tft16mb
+        GOTO end_loop_bigdb_16mb
     )
 )
-:end_loop_tft16mb
+:end_loop_bigdb_16mb
 
-IF %TFT8% EQU 1 CALL :LOG_MESSAGE INFO "tft and MUI 8mb selected."
+IF %BIGDB8% EQU 1 CALL :LOG_MESSAGE INFO "BigDB 8mb partition selected."
-IF %TFT16% EQU 1 CALL :LOG_MESSAGE INFO "tft and MUI 16mb selected."
+IF %BIGDB16% EQU 1 CALL :LOG_MESSAGE INFO "BigDB 16mb partition selected."
-
-:no_tft
 
 @REM Extract BASENAME from %FILENAME% for later use.
 SET "BASENAME=!FILENAME:firmware-=!"
 CALL :LOG_MESSAGE DEBUG "Computed firmware basename: !BASENAME!"
 
 @REM Account for S3 and C3 board's different OTA partition.
-SET "S3=s3 v3 t-deck wireless-paper wireless-tracker station-g2 unphone"
 FOR %%a IN (%S3%) DO (
     IF NOT "!FILENAME:%%a=!"=="!FILENAME!" (
         @REM We are working with any of %S3%.
@@ -180,7 +179,6 @@ FOR %%a IN (%S3%) DO (
     )
 )
 
-SET "C3=esp32c3"
 FOR %%a IN (%C3%) DO (
     IF NOT "!FILENAME:%%a=!"=="!FILENAME!" (
         @REM We are working with any of %C3%.
@@ -209,14 +207,14 @@ CALL :LOG_MESSAGE DEBUG "Set SPIFFS_FILENAME to: !SPIFFS_FILENAME!"
 SET "OTA_OFFSET=0x260000"
 SET "SPIFFS_OFFSET=0x300000"
 
-@REM Offsets for MUI 8mb.
+@REM Offsets for BigDB 8mb.
-IF %TFT8% EQU 1 IF %TFT_BUILD% EQU 1 (
+IF %BIGDB8% EQU 1 (
     SET "OTA_OFFSET=0x340000"
     SET "SPIFFS_OFFSET=0x670000"
 )
 
-@REM Offsets for MUI 16mb.
+@REM Offsets for BigDB 16mb.
-IF %TFT16% EQU 1 IF %TFT_BUILD% EQU 1 (
+IF %BIGDB16% EQU 1 (
     SET "OTA_OFFSET=0x650000"
     SET "SPIFFS_OFFSET=0xc90000"
 )

bin/device-install.sh

@@ -2,9 +2,48 @@
 
 PYTHON=${PYTHON:-$(which python3 python | head -n 1)}
 WEB_APP=false
-TFT8=false
-TFT16=false
 TFT_BUILD=false
+MCU=""
+
+# Variant groups
+BIGDB_8MB=(
+	"picomputer-s3"
+	"unphone"
+	"seeed-sensecap-indicator"
+	"crowpanel-esp32s3"
+	"heltec_capsule_sensor_v3"
+	"heltec-v3"
+	"heltec-vision-master-e213"
+	"heltec-vision-master-e290"
+	"heltec-vision-master-t190"
+	"heltec-wireless-paper"
+	"heltec-wireless-tracker"
+	"heltec-wsl-v3"
+	"icarus"
+	"seeed-xiao-s3"
+	"tbeam-s3-core"
+	"tracksenger"
+)
+BIGDB_16MB=(
+	"t-deck"
+	"mesh-tab"
+	"t-energy-s3"
+	"dreamcatcher"
+	"ESP32-S3-Pico"
+	"m5stack-cores3"
+	"station-g2"
+	"t-eth-elite"
+	"t-watch-s3"
+)
+S3_VARIANTS=(
+	"s3"
+	"-v3"
+	"t-deck"
+	"wireless-paper"
+	"wireless-tracker"
+	"station-g2"
+	"unphone"
+)
 
 # Determine the correct esptool command to use
 if "$PYTHON" -m esptool version >/dev/null 2>&1; then
@@ -78,21 +117,13 @@ if [[ $FILENAME != firmware-* ]]; then
   exit 1
 fi
 
-# Check if FILENAME contains "-tft-" and set target partitionScheme accordingly.
+# Check if FILENAME contains "-tft-" and prevent web/mui comingling.
 if [[ ${FILENAME//-tft-/} != "$FILENAME" ]]; then
 	TFT_BUILD=true
 	if [[ $WEB_APP == true ]] && [[ $TFT_BUILD == true ]]; then
 		echo "Cannot enable WebUI (--web) and MUI."
 		exit 1
 	fi
-
-	if [[ $FILENAME == *"picomputer-s3"* || $FILENAME == *"unphone"* || $FILENAME == *"seeed-sensecap-indicator"* ]]; then
-		TFT8=true
-	fi
-
-	if [[ $FILENAME == *"t-deck"* ]]; then
-		TFT16=true
-	fi
 fi
 
 # Extract BASENAME from %FILENAME% for later use.
@@ -105,20 +136,31 @@ if [ -f "${FILENAME}" ] && [ -n "${FILENAME##*"update"*}" ]; then
 	# Default OTA Offset
 	OTA_OFFSET=0x260000
 
-	# littlefs* offset for MUI 8mb and OTA OFFSET.
+	# littlefs* offset for BigDB 8mb and OTA OFFSET.
-	if [ "$TFT8" = true ] && [ "$TFT_BUILD" = true ]; then
+	for variant in "${BIGDB_8MB[@]}"; do
+		if [ -n "${FILENAME##*"$variant"*}" ]; then
 			OFFSET=0x670000
 			OTA_OFFSET=0x340000
 		fi
+	done
 
-	# littlefs* offset for MUI 16mb and OTA OFFSET.
+	# littlefs* offset for BigDB 16mb and OTA OFFSET.
-	if [ "$TFT16" = true ] && [ "$TFT_BUILD" = true ]; then
+	for variant in "${BIGDB_16MB[@]}"; do
+		if [ -n "${FILENAME##*"$variant"*}" ]; then
 			OFFSET=0xc90000
 			OTA_OFFSET=0x650000
 		fi
+	done
 
 	# Account for S3 board's different OTA partition
-	if [ -n "${FILENAME##*"s3"*}" ] && [ -n "${FILENAME##*"-v3"*}" ] && [ -n "${FILENAME##*"t-deck"*}" ] && [ -n "${FILENAME##*"wireless-paper"*}" ] && [ -n "${FILENAME##*"wireless-tracker"*}" ] && [ -n "${FILENAME##*"station-g2"*}" ] && [ -n "${FILENAME##*"unphone"*}" ]; then
+	# FIXME: Use PlatformIO info to determine MCU type, this is unmaintainable
+	for variant in "${S3_VARIANTS[@]}"; do
+		if [ -n "${FILENAME##*"$variant"*}" ]; then
+			MCU="esp32s3"
+		fi
+	done
+
+	if [ "$MCU" != "esp32s3" ]; then
 		if [ -n "${FILENAME##*"esp32c3"*}" ]; then
 			OTAFILE=bleota.bin
 		else

src/mesh/mesh-pb-constants.h

@@ -18,10 +18,30 @@
 #define MAX_RX_TOPHONE 32
 #endif
 
-/// max number of nodes allowed in the mesh
+/// max number of nodes allowed in the nodeDB
 #ifndef MAX_NUM_NODES
+#if defined(ARCH_STM32WL)
+#define MAX_NUM_NODES 10
+#elif defined(ARCH_NRF52)
+#define MAX_NUM_NODES 80
+#elif defined(CONFIG_IDF_TARGET_ESP32S3)
+#include "Esp.h"
+static inline int get_max_num_nodes()
+{
+    uint32_t flash_size = ESP.getFlashChipSize() / (1024 * 1024); // Convert Bytes to MB
+    if (flash_size >= 15) {
+        return 250;
+    } else if (flash_size >= 7) {
+        return 200;
+    } else {
+        return 100;
+    }
+}
+#define MAX_NUM_NODES get_max_num_nodes()
+#else
 #define MAX_NUM_NODES 100
 #endif
+#endif
 
 /// Max number of channels allowed
 #define MAX_NUM_CHANNELS (member_size(meshtastic_ChannelFile, channels) / member_size(meshtastic_ChannelFile, channels[0]))

variants/CDEBYTE_E77-MBL/variant.h

@@ -14,7 +14,6 @@ Do not expect a working Meshtastic device with this target.
 #define _VARIANT_EBYTE_E77_
 
 #define USE_STM32WLx
-#define MAX_NUM_NODES 10
 
 #define LED_PIN PB4 // LED1
 // #define LED_PIN PB3 // LED2

variants/crowpanel-esp32s3-5-epaper/platformio.ini

@@ -5,6 +5,7 @@ board_build.flash_mode = qio
 board_build.psram_type = opi
 board_upload.flash_size = 8MB
 board_upload.maximum_size = 8388608
+board_build.partitions = default_8MB.csv
 board = esp32-s3-devkitc-1
 ;upload_port = /dev/ttyUSB0
 board_level = extra
@@ -32,6 +33,7 @@ board_build.flash_mode = qio
 board_build.psram_type = opi
 board_upload.flash_size = 8MB
 board_upload.maximum_size = 8388608
+board_build.partitions = default_8MB.csv
 board = esp32-s3-devkitc-1
 ;upload_port = /dev/ttyUSB0
 board_level = extra
@@ -59,6 +61,7 @@ board_build.flash_mode = qio
 board_build.psram_type = opi
 board_upload.flash_size = 8MB
 board_upload.maximum_size = 8388608
+board_build.partitions = default_8MB.csv
 board = esp32-s3-devkitc-1
 ;upload_port = /dev/ttyUSB0
 board_level = extra

variants/diy/platformio.ini

@@ -88,6 +88,7 @@ debug_tool = jlink
 [env:t-energy-s3_e22]
 extends = esp32s3_base
 board = esp32-s3-devkitc-1
+board_build.partitions = default_16MB.csv
 board_level = extra
 board_upload.flash_size = 16MB ;Specify the FLASH capacity as 16MB
 board_build.arduino.memory_type = qio_opi ;Enable internal PSRAM

variants/dreamcatcher/platformio.ini

@@ -1,6 +1,7 @@
 [env:dreamcatcher] ; 2301, latest revision
 extends = esp32s3_base
 board = esp32s3box
+board_build.partitions = default_16MB.csv
 board_level = extra
 
 build_flags = 
@@ -8,7 +9,7 @@ build_flags =
   -D PRIVATE_HW
   -D OTHERNET_DC_REV=2301
   -I variants/dreamcatcher
-  -DARDUINO_USB_CDC_ON_BOOT=1
+  -D ARDUINO_USB_CDC_ON_BOOT=1
 
 lib_deps = ${esp32s3_base.lib_deps}
   earlephilhower/ESP8266Audio@^1.9.9
@@ -17,6 +18,7 @@ lib_deps = ${esp32s3_base.lib_deps}
 [env:dreamcatcher-2206] 
 extends = esp32s3_base
 board = esp32s3box
+board_build.partitions = default_16MB.csv
 board_level = extra
 
 build_flags = 
@@ -24,4 +26,4 @@ build_flags =
   -D PRIVATE_HW
   -D OTHERNET_DC_REV=2206
   -I variants/dreamcatcher
-  -DARDUINO_USB_CDC_ON_BOOT=1
+  -D ARDUINO_USB_CDC_ON_BOOT=1

variants/esp32-s3-pico/platformio.ini

@@ -4,6 +4,7 @@ board_level = extra
 extends = esp32s3_base
 upload_protocol = esptool
 board = esp32-s3-pico
+board_build.partitions = default_16MB.csv
 
 board_upload.use_1200bps_touch = yes
 board_upload.wait_for_upload_port = yes

variants/heltec_capsule_sensor_v3/platformio.ini

@@ -2,7 +2,7 @@
 extends = esp32s3_base
 board = heltec_wifi_lora_32_V3
 board_check = true
-
+board_build.partitions = default_8MB.csv
 build_flags = 
   ${esp32s3_base.build_flags} -I variants/heltec_capsule_sensor_v3
   -D HELTEC_CAPSULE_SENSOR_V3

variants/heltec_v3/platformio.ini

@@ -2,7 +2,7 @@
 extends = esp32s3_base
 board = heltec_wifi_lora_32_V3
 board_check = true
-# Temporary until espressif creates a release with this new target
+board_build.partitions = default_8MB.csv
 build_flags = 
   ${esp32s3_base.build_flags} -D HELTEC_V3 -I variants/heltec_v3
-  -DGPS_POWER_TOGGLE ; comment this line to disable triple press function on the user button to turn off gps entirely.
+  -D GPS_POWER_TOGGLE ; comment this line to disable triple press function on the user button to turn off gps entirely.

variants/heltec_vision_master_e213/platformio.ini

@@ -1,6 +1,7 @@
 [env:heltec-vision-master-e213]
 extends = esp32s3_base
 board = heltec_vision_master_e213
+board_build.partitions = default_8MB.csv
 build_flags = 
   ${esp32s3_base.build_flags}
   -Ivariants/heltec_vision_master_e213 
@@ -22,6 +23,7 @@ upload_speed = 115200
 [env:heltec-vision-master-e213-inkhud]
 extends = esp32s3_base, inkhud
 board = heltec_vision_master_e213
+board_build.partitions = default_8MB.csv
 build_src_filter =
   ${esp32_base.build_src_filter}
   ${inkhud.build_src_filter}

variants/heltec_vision_master_e290/platformio.ini

@@ -2,6 +2,7 @@
 [env:heltec-vision-master-e290]
 extends = esp32s3_base
 board = heltec_vision_master_e290
+board_build.partitions = default_8MB.csv
 build_flags = 
   ${esp32s3_base.build_flags} 
   -I variants/heltec_vision_master_e290
@@ -26,6 +27,7 @@ upload_speed = 115200
 [env:heltec-vision-master-e290-inkhud]
 extends = esp32s3_base, inkhud
 board = heltec_vision_master_e290
+board_build.partitions = default_8MB.csv
 build_src_filter = 
   ${esp32_base.build_src_filter} 
   ${inkhud.build_src_filter}

variants/heltec_vision_master_t190/platformio.ini

@@ -1,11 +1,11 @@
 [env:heltec-vision-master-t190]
 extends = esp32s3_base
 board = heltec_vision_master_t190
+board_build.partitions = default_8MB.csv
 build_flags = 
   ${esp32s3_base.build_flags} 
   -Ivariants/heltec_vision_master_t190
   -DHELTEC_VISION_MASTER_T190
- ; -D PRIVATE_HW 
 lib_deps =
   ${esp32s3_base.lib_deps}
   lewisxhe/PCF8563_Library@^1.0.1

variants/heltec_wireless_paper/platformio.ini

@@ -2,6 +2,7 @@
 [env:heltec-wireless-paper]
 extends = esp32s3_base
 board = heltec_wifi_lora_32_V3
+board_build.partitions = default_8MB.csv
 build_flags = 
   ${esp32s3_base.build_flags} 
   -I variants/heltec_wireless_paper
@@ -23,6 +24,7 @@ upload_speed = 115200
 [env:heltec-wireless-paper-inkhud]
 extends = esp32s3_base, inkhud
 board = heltec_wifi_lora_32_V3
+board_build.partitions = default_8MB.csv
 build_src_filter =
   ${esp32_base.build_src_filter} 
   ${inkhud.build_src_filter}

variants/heltec_wireless_paper_v1/platformio.ini

@@ -2,6 +2,7 @@
 extends = esp32s3_base
 board_level = extra
 board = heltec_wifi_lora_32_V3
+board_build.partitions = default_8MB.csv
 build_flags = 
   ${esp32s3_base.build_flags} 
   -I variants/heltec_wireless_paper_v1 

variants/heltec_wireless_tracker/platformio.ini

@@ -1,6 +1,7 @@
 [env:heltec-wireless-tracker]
 extends = esp32s3_base
 board = heltec_wireless_tracker
+board_build.partitions = default_8MB.csv
 upload_protocol = esptool
 
 build_flags = 

variants/heltec_wireless_tracker_V1_0/platformio.ini

@@ -2,6 +2,7 @@
 extends = esp32s3_base
 board_level = extra
 board = heltec_wireless_tracker
+board_build.partitions = default_8MB.csv
 upload_protocol = esptool
 build_flags = 
   ${esp32s3_base.build_flags} -I variants/heltec_wireless_tracker_V1_0

variants/heltec_wsl_v3/platformio.ini

@@ -1,7 +1,8 @@
 [env:heltec-wsl-v3] 
 extends = esp32s3_base
 board = heltec_wifi_lora_32_V3
+board_build.partitions = default_8MB.csv
 # Temporary until espressif creates a release with this new target
 build_flags = 
   ${esp32s3_base.build_flags} -D HELTEC_WSL_V3 -I variants/heltec_wsl_v3
-  -DGPS_POWER_TOGGLE ; comment this line to disable triple press function on the user button to turn off gps entirely.
+  -D GPS_POWER_TOGGLE ; comment this line to disable triple press function on the user button to turn off gps entirely.

variants/icarus/platformio.ini

@@ -4,6 +4,7 @@ board = icarus
 board_level = extra
 board_check = true
 board_build.mcu = esp32s3
+board_build.partitions = default_8MB.csv
 upload_protocol = esptool
 upload_speed = 921600
 platform_packages = platformio/framework-arduinoespressif32@https://github.com/PowerFeather/powerfeather-meshtastic-arduino-lib/releases/download/2.0.16a/esp32-2.0.16.zip
@@ -15,5 +16,4 @@ build_unflags =
 build_flags = 
   ${esp32s3_base.build_flags} -D PRIVATE_HW -I variants/icarus
   -DBOARD_HAS_PSRAM 
-
   -DARDUINO_USB_MODE=0

variants/m5stack_cores3/platformio.ini

@@ -3,6 +3,7 @@
 extends = esp32s3_base
 board = m5stack-cores3
 board_check = true
+board_build.partitions = default_16MB.csv
 upload_protocol = esptool
 
 build_flags = ${esp32_base.build_flags} 

variants/mesh-tab/platformio.ini

@@ -28,7 +28,6 @@ build_flags = ${esp32s3_base.build_flags}
   -D USE_LOG_DEBUG
   -D LOG_DEBUG_INC=\"DebugConfiguration.h\"
   -D RADIOLIB_SPI_PARANOID=0
-  -D MAX_NUM_NODES=250
   -D MAX_THREADS=40
   -D HAS_SCREEN=0
   -D HAS_TFT=1

variants/picomputer-s3/platformio.ini

@@ -2,6 +2,7 @@
 extends = esp32s3_base
 board = bpi_picow_esp32_s3
 board_check = true
+board_build.partitions = default_8MB.csv
 ;OpenOCD flash method
 ;upload_protocol = esp-builtin
 ;Normal method
@@ -22,7 +23,6 @@ build_src_filter =
 
 [env:picomputer-s3-tft]
 extends = env:picomputer-s3
-board_build.partitions = default_8MB.csv ; just for test
 
 build_flags =
   ${env:picomputer-s3.build_flags}
@@ -35,7 +35,6 @@ build_flags =
   -D INPUTDRIVER_MATRIX_TYPE=1
   -D USE_PIN_BUZZER=PIN_BUZZER
   -D USE_SX127x
-  -D MAX_NUM_NODES=200
   -D HAS_SCREEN=0
   -D HAS_TFT=1
   -D RAM_SIZE=1024

variants/rak3172/variant.h

@@ -7,6 +7,5 @@ Do not expect a working Meshtastic device with this target.
 #define _VARIANT_RAK3172_
 
 #define USE_STM32WLx
-#define MAX_NUM_NODES 10
 
 #endif

variants/seeed-sensecap-indicator/platformio.ini

@@ -6,6 +6,7 @@ platform_packages =
 
 board = seeed-sensecap-indicator
 board_check = true
+board_build.partitions = default_8MB.csv
 upload_protocol = esptool
 
 build_flags = ${esp32_base.build_flags}
@@ -32,7 +33,6 @@ lib_deps = ${esp32s3_base.lib_deps}
 extends = env:seeed-sensecap-indicator
 board_level = main
 upload_speed = 460800
-board_build.partitions = default_8MB.csv ; must be here for some reason, board.json is not enough !?
 
 build_flags =
   ${env:seeed-sensecap-indicator.build_flags}
@@ -46,7 +46,6 @@ build_flags =
   -D INPUTDRIVER_BUTTON_TYPE=38
   -D HAS_TELEMETRY=0
   -D CONFIG_DISABLE_HAL_LOCKS=1
-  -D MAX_NUM_NODES=250
   -D HAS_SCREEN=0
   -D HAS_TFT=1
   -D DISPLAY_SET_RESOLUTION

variants/seeed_xiao_s3/platformio.ini

@@ -2,7 +2,7 @@
 extends = esp32s3_base
 board = seeed-xiao-s3
 board_check = true
-board_build.mcu = esp32s3
+board_build.partitions = default_8MB.csv
 upload_protocol = esptool
 upload_speed = 921600
 lib_deps =

variants/station-g2/platformio.ini

@@ -2,6 +2,7 @@
 extends = esp32s3_base
 board = station-g2
 board_check = true
+board_build.partitions = default_16MB.csv
 board_build.mcu = esp32s3
 upload_protocol = esptool
 ;upload_port = /dev/ttyACM0

variants/t-deck/platformio.ini

@@ -3,6 +3,7 @@
 extends = esp32s3_base
 board = t-deck
 board_check = true
+board_build.partitions = default_16MB.csv
 upload_protocol = esptool
 
 build_flags = ${esp32s3_base.build_flags} 
@@ -20,7 +21,6 @@ lib_deps = ${esp32s3_base.lib_deps}
 
 [env:t-deck-tft]
 extends = env:t-deck
-board_build.partitions = default_16MB.csv
 
 build_flags =
   ${env:t-deck.build_flags}
@@ -38,7 +38,6 @@ build_flags =
   -D INPUTDRIVER_ENCODER_DOWN=15
   -D INPUTDRIVER_ENCODER_BTN=0
   -D INPUTDRIVER_BUTTON_TYPE=0
-  -D MAX_NUM_NODES=250
   -D HAS_SDCARD
   -D HAS_SCREEN=0
   -D HAS_TFT=1

variants/t-eth-elite/platformio.ini

@@ -2,11 +2,12 @@
 extends = esp32s3_base
 board = esp32s3box
 board_check = true
+board_build.partitions = default_16MB.csv
 build_flags = 
   ${esp32s3_base.build_flags}
   -D T_ETH_ELITE
   -I variants/t-eth-elite
-  -DGPS_POWER_TOGGLE ; comment this line to disable triple press function on the user button to turn off gps entirely.
+  -D GPS_POWER_TOGGLE ; comment this line to disable triple press function on the user button to turn off gps entirely.
 
 lib_ignore = 
     Ethernet

variants/t-watch-s3/platformio.ini

@@ -3,6 +3,7 @@
 extends = esp32s3_base
 board = t-watch-s3
 board_check = true
+board_build.partitions = default_16MB.csv
 upload_protocol = esptool
 
 build_flags = ${esp32_base.build_flags} 

variants/tbeam-s3-core/platformio.ini

@@ -2,6 +2,7 @@
 [env:tbeam-s3-core]
 extends = esp32s3_base
 board = tbeam-s3-core
+board_build.partitions = default_8MB.csv
 board_check = true
 
 lib_deps =

variants/tracksenger/platformio.ini

@@ -1,6 +1,7 @@
 [env:tracksenger]
 extends = esp32s3_base
 board = heltec_wireless_tracker
+board_build.partitions = default_8MB.csv
 upload_protocol = esp-builtin
 
 build_flags = 
@@ -16,6 +17,7 @@ lib_deps =
 [env:tracksenger-lcd]
 extends = esp32s3_base
 board = heltec_wireless_tracker
+board_build.partitions = default_8MB.csv
 upload_protocol = esp-builtin
 
 build_flags = 
@@ -31,6 +33,7 @@ lib_deps =
 [env:tracksenger-oled]
 extends = esp32s3_base
 board = heltec_wireless_tracker
+board_build.partitions = default_8MB.csv
 upload_protocol = esp-builtin
 
 build_flags = 

variants/unphone/platformio.ini

@@ -3,6 +3,7 @@
 [env:unphone]
 extends = esp32s3_base
 board = unphone
+board_build.partitions = default_8MB.csv
 upload_speed = 921600
 monitor_speed = 115200
 monitor_filters = esp32_exception_decoder
@@ -32,7 +33,6 @@ lib_deps = ${esp32s3_base.lib_deps}
 
 [env:unphone-tft]
 extends = env:unphone
-board_build.partitions = default_8MB.csv
 build_flags =
   ${env:unphone.build_flags}
   -D MESHTASTIC_EXCLUDE_CANNEDMESSAGES=1
@@ -42,7 +42,6 @@ build_flags =
   -D MESHTASTIC_EXCLUDE_SERIAL=1
   -D MESHTASTIC_EXCLUDE_SOCKETAPI=1
   -D INPUTDRIVER_BUTTON_TYPE=21
-  -D MAX_NUM_NODES=200
   -D MAX_THREADS=40
   -D HAS_SCREEN=0
   -D HAS_TFT=1

variants/wio-e5/variant.h

@@ -13,7 +13,6 @@ Do not expect a working Meshtastic device with this target.
 #define _VARIANT_WIOE5_
 
 #define USE_STM32WLx
-#define MAX_NUM_NODES 10
 
 #define LED_PIN PB5
 #define LED_STATE_ON 1