trunk fmt

variants/heltec_wireless_tracker/platformio.ini

@@ -8,4 +8,4 @@ build_flags =
 
 lib_deps =
   ${esp32s3_base.lib_deps}
-  lovyan03/LovyanGFX@^1.1.7
+  lovyan03/LovyanGFX@^1.1.8

variants/m5stack_core/platformio.ini

@@ -26,4 +26,4 @@ lib_ignore =
   m5stack-core
 lib_deps = 
   ${esp32_base.lib_deps}
-  lovyan03/LovyanGFX@^1.1.7
+  lovyan03/LovyanGFX@^1.1.8

variants/nano-g2-ultra/variant.h

@@ -114,9 +114,8 @@ External serial flash W25Q16JV_IQ
 #define SX126X_CS (32 + 13) // FIXME - we really should define LORA_CS instead
 #define SX126X_DIO1 (32 + 10)
 // Note DIO2 is attached internally to the module to an analog switch for TX/RX switching
-//#define SX1262_DIO3 \
-    (0 + 21) // This is used as an *output* from the sx1262 and connected internally to power the tcxo, do not drive from the main
-// CPU?
+//#define SX1262_DIO3 (0 + 21)
+// This is used as an *output* from the sx1262 and connected internally to power the tcxo, do not drive from the main CPU?
 #define SX126X_BUSY (32 + 11)
 #define SX126X_RESET (32 + 15)
 #define SX126X_E22 //  DIO2 controlls an antenna switch and the TCXO voltage is controlled by DIO3

variants/t-deck/platformio.ini

@@ -11,4 +11,4 @@ build_flags = ${esp32_base.build_flags}
   -Ivariants/t-deck
 
 lib_deps = ${esp32s3_base.lib_deps}
-	lovyan03/LovyanGFX@^1.1.7
+	lovyan03/LovyanGFX@^1.1.8

variants/t-watch-s3/platformio.ini

@@ -12,6 +12,6 @@ build_flags = ${esp32_base.build_flags}
   -DPCF8563_RTC=0x51
 
 lib_deps = ${esp32s3_base.lib_deps}
-	lovyan03/LovyanGFX@^1.1.7
+	lovyan03/LovyanGFX@^1.1.8
   lewisxhe/PCF8563_Library@1.0.1
   adafruit/Adafruit DRV2605 Library@^1.2.2