diff --git a/platformio.ini b/platformio.ini
index 1069f8e03..0ba38adc7 100644
--- a/platformio.ini
+++ b/platformio.ini
@@ -160,7 +160,7 @@ build_flags =
   -Isdk-nrfxlib/crypto/nrf_oberon/include -Lsdk-nrfxlib/crypto/nrf_oberon/lib/cortex-m4/hard-float/ -lliboberon_3.0.3 
 ;-DCFG_DEBUG=3
 src_filter = 
-  ${env.src_filter} -<esp32/> -<nimble/>
+  ${env.src_filter} -<esp32/> -<nimble/> -<meshwifi/>
 lib_ignore =
   BluetoothOTA
 monitor_port = /dev/ttyACM1
diff --git a/src/configuration.h b/src/configuration.h
index e70f1fda4..b9c869102 100644
--- a/src/configuration.h
+++ b/src/configuration.h
@@ -101,6 +101,8 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 // Standard definitions for ESP32 targets
 //
 
+#define HAS_WIFI
+
 #define GPS_SERIAL_NUM 1
 #define GPS_RX_PIN 34
 #ifdef USE_JTAG
diff --git a/src/graphics/Screen.cpp b/src/graphics/Screen.cpp
index 29637934e..6675d8a1f 100644
--- a/src/graphics/Screen.cpp
+++ b/src/graphics/Screen.cpp
@@ -32,7 +32,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #include "main.h"
 #include "mesh-pb-constants.h"
 #include "utils.h"
-#include <WiFi.h>
 #include "meshwifi/meshwifi.h"
 
 using namespace meshtastic; /** @todo remove */
@@ -842,6 +841,7 @@ void DebugInfo::drawFrame(OLEDDisplay *display, OLEDDisplayUiState *state, int16
 // Jm
 void DebugInfo::drawFrameWiFi(OLEDDisplay *display, OLEDDisplayUiState *state, int16_t x, int16_t y)
 {
+#ifdef HAS_WIFI
     const char *wifiName = radioConfig.preferences.wifi_ssid;
     const char *wifiPsw = radioConfig.preferences.wifi_password;
 
@@ -869,6 +869,7 @@ void DebugInfo::drawFrameWiFi(OLEDDisplay *display, OLEDDisplayUiState *state, i
         display->setPixel(0, 0);
     heartbeat = !heartbeat;
 #endif
+#endif
 }
 
 
diff --git a/src/graphics/Screen.h b/src/graphics/Screen.h
index 8f5a6de2a..0fc6e5880 100644
--- a/src/graphics/Screen.h
+++ b/src/graphics/Screen.h
@@ -17,7 +17,6 @@
 #include "concurrency/PeriodicTask.h"
 #include "power.h"
 #include <string>
-#include <WiFi.h>
 
 namespace graphics
 {
diff --git a/src/meshwifi/meshhttp.h b/src/meshwifi/meshhttp.h
index cbff51db7..cabb1a2c3 100644
--- a/src/meshwifi/meshhttp.h
+++ b/src/meshwifi/meshhttp.h
@@ -2,7 +2,6 @@
 
 #include <Arduino.h>
 #include <functional>
-#include <WiFi.h>
 
 void initWebServer();
 
diff --git a/src/meshwifi/meshwifi.cpp b/src/meshwifi/meshwifi.cpp
index 14ac8a2a7..8c1d2c8f6 100644
--- a/src/meshwifi/meshwifi.cpp
+++ b/src/meshwifi/meshwifi.cpp
@@ -1,11 +1,13 @@
 #include "meshwifi.h"
-#include <WiFi.h>
+#include "NodeDB.h"
 #include "configuration.h"
 #include "main.h"
-#include "NodeDB.h"
 #include "meshwifi/meshhttp.h"
+#include <WiFi.h>
 
-bool isWifiAvailable() 
+static void WiFiEvent(WiFiEvent_t event);
+
+bool isWifiAvailable()
 {
     const char *wifiName = radioConfig.preferences.wifi_ssid;
     const char *wifiPsw = radioConfig.preferences.wifi_password;
@@ -20,33 +22,31 @@ bool isWifiAvailable()
 // Disable WiFi
 void deinitWifi()
 {
-    /* 
+    /*
         Note from Jm (Sept 16, 2020):
-    
+
         A bug in the ESP32 SDK was introduced in Oct 2019 that keeps the WiFi radio from
         turning back on after it's shut off. See:
             https://github.com/espressif/arduino-esp32/issues/3522
 
         Until then, WiFi should only be allowed when there's no power
         saving on the 2.4g transceiver.
-    */     
+    */
 
     WiFi.mode(WIFI_MODE_NULL);
     DEBUG_MSG("WiFi Turned Off\n");
     WiFi.printDiag(Serial);
 }
 
-
 // Startup WiFi
 void initWifi()
 {
-
     if (isWifiAvailable() == 0) {
         return;
     }
 
-    //strcpy(radioConfig.preferences.wifi_ssid, WiFi_SSID_NAME);
-    //strcpy(radioConfig.preferences.wifi_password, WiFi_SSID_PASSWORD);
+    // strcpy(radioConfig.preferences.wifi_ssid, WiFi_SSID_NAME);
+    // strcpy(radioConfig.preferences.wifi_password, WiFi_SSID_PASSWORD);
     if (radioConfig.has_preferences) {
         const char *wifiName = radioConfig.preferences.wifi_ssid;
 
@@ -57,8 +57,7 @@ void initWifi()
             } else {
                 WiFi.mode(WIFI_MODE_STA);
                 WiFi.onEvent(WiFiEvent);
-                //esp_wifi_set_ps(WIFI_PS_NONE); // Disable power saving
-
+                // esp_wifi_set_ps(WIFI_PS_NONE); // Disable power saving
 
                 DEBUG_MSG("JOINING WIFI: ssid=%s\n", wifiName);
                 if (WiFi.begin(wifiName, wifiPsw) == WL_CONNECTED) {
@@ -72,95 +71,95 @@ void initWifi()
         DEBUG_MSG("Not using WIFI\n");
 }
 
-
-void WiFiEvent(WiFiEvent_t event)
+static void WiFiEvent(WiFiEvent_t event)
 {
     DEBUG_MSG("************ [WiFi-event] event: %d ************\n", event);
 
     switch (event) {
-        case SYSTEM_EVENT_WIFI_READY: 
-            DEBUG_MSG("WiFi interface ready\n");
-            break;
-        case SYSTEM_EVENT_SCAN_DONE:
-            DEBUG_MSG("Completed scan for access points\n");
-            break;
-        case SYSTEM_EVENT_STA_START:
-            DEBUG_MSG("WiFi client started\n");
-            break;
-        case SYSTEM_EVENT_STA_STOP:
-            DEBUG_MSG("WiFi clients stopped\n");
-            break;
-        case SYSTEM_EVENT_STA_CONNECTED:
-            DEBUG_MSG("Connected to access point\n");
-            break;
-        case SYSTEM_EVENT_STA_DISCONNECTED:
-            DEBUG_MSG("Disconnected from WiFi access point\n");
+    case SYSTEM_EVENT_WIFI_READY:
+        DEBUG_MSG("WiFi interface ready\n");
+        break;
+    case SYSTEM_EVENT_SCAN_DONE:
+        DEBUG_MSG("Completed scan for access points\n");
+        break;
+    case SYSTEM_EVENT_STA_START:
+        DEBUG_MSG("WiFi client started\n");
+        break;
+    case SYSTEM_EVENT_STA_STOP:
+        DEBUG_MSG("WiFi clients stopped\n");
+        break;
+    case SYSTEM_EVENT_STA_CONNECTED:
+        DEBUG_MSG("Connected to access point\n");
+        break;
+    case SYSTEM_EVENT_STA_DISCONNECTED:
+        DEBUG_MSG("Disconnected from WiFi access point\n");
 
-            // Reconnect WiFi
-            initWifi();
-            break;
-        case SYSTEM_EVENT_STA_AUTHMODE_CHANGE:
-            DEBUG_MSG("Authentication mode of access point has changed\n");
-            break;
-        case SYSTEM_EVENT_STA_GOT_IP:
-            DEBUG_MSG("Obtained IP address: \n");
-            Serial.println(WiFi.localIP());
+        // Reconnect WiFi
+        initWifi();
+        break;
+    case SYSTEM_EVENT_STA_AUTHMODE_CHANGE:
+        DEBUG_MSG("Authentication mode of access point has changed\n");
+        break;
+    case SYSTEM_EVENT_STA_GOT_IP:
+        DEBUG_MSG("Obtained IP address: \n");
+        Serial.println(WiFi.localIP());
 
-            // Start web server
-            initWebServer();
-            
-            break;
-        case SYSTEM_EVENT_STA_LOST_IP:
-            DEBUG_MSG("Lost IP address and IP address is reset to 0\n");
-            break;
-        case SYSTEM_EVENT_STA_WPS_ER_SUCCESS:
-            DEBUG_MSG("WiFi Protected Setup (WPS): succeeded in enrollee mode\n");
-            break;
-        case SYSTEM_EVENT_STA_WPS_ER_FAILED:
-            DEBUG_MSG("WiFi Protected Setup (WPS): failed in enrollee mode\n");
-            break;
-        case SYSTEM_EVENT_STA_WPS_ER_TIMEOUT:
-            DEBUG_MSG("WiFi Protected Setup (WPS): timeout in enrollee mode\n");
-            break;
-        case SYSTEM_EVENT_STA_WPS_ER_PIN:
-            DEBUG_MSG("WiFi Protected Setup (WPS): pin code in enrollee mode\n");
-            break;
-        case SYSTEM_EVENT_AP_START:
-            DEBUG_MSG("WiFi access point started\n");
-            break;
-        case SYSTEM_EVENT_AP_STOP:
-            DEBUG_MSG("WiFi access point stopped\n");
-            break;
-        case SYSTEM_EVENT_AP_STACONNECTED:
-            DEBUG_MSG("Client connected\n");
-            break;
-        case SYSTEM_EVENT_AP_STADISCONNECTED:
-            DEBUG_MSG("Client disconnected\n");
-            break;
-        case SYSTEM_EVENT_AP_STAIPASSIGNED:
-            DEBUG_MSG("Assigned IP address to client\n");
-            break;
-        case SYSTEM_EVENT_AP_PROBEREQRECVED:
-            DEBUG_MSG("Received probe request\n");
-            break;
-        case SYSTEM_EVENT_GOT_IP6:
-            DEBUG_MSG("IPv6 is preferred\n");
-            break;
-        case SYSTEM_EVENT_ETH_START:
-            DEBUG_MSG("Ethernet started\n");
-            break;
-        case SYSTEM_EVENT_ETH_STOP:
-            DEBUG_MSG("Ethernet stopped\n");
-            break;
-        case SYSTEM_EVENT_ETH_CONNECTED:
-            DEBUG_MSG("Ethernet connected\n");
-            break;
-        case SYSTEM_EVENT_ETH_DISCONNECTED:
-            DEBUG_MSG("Ethernet disconnected\n");
-            break;
-        case SYSTEM_EVENT_ETH_GOT_IP:
-            DEBUG_MSG("Obtained IP address\n");
-            break;
-        default: break;
+        // Start web server
+        initWebServer();
+
+        break;
+    case SYSTEM_EVENT_STA_LOST_IP:
+        DEBUG_MSG("Lost IP address and IP address is reset to 0\n");
+        break;
+    case SYSTEM_EVENT_STA_WPS_ER_SUCCESS:
+        DEBUG_MSG("WiFi Protected Setup (WPS): succeeded in enrollee mode\n");
+        break;
+    case SYSTEM_EVENT_STA_WPS_ER_FAILED:
+        DEBUG_MSG("WiFi Protected Setup (WPS): failed in enrollee mode\n");
+        break;
+    case SYSTEM_EVENT_STA_WPS_ER_TIMEOUT:
+        DEBUG_MSG("WiFi Protected Setup (WPS): timeout in enrollee mode\n");
+        break;
+    case SYSTEM_EVENT_STA_WPS_ER_PIN:
+        DEBUG_MSG("WiFi Protected Setup (WPS): pin code in enrollee mode\n");
+        break;
+    case SYSTEM_EVENT_AP_START:
+        DEBUG_MSG("WiFi access point started\n");
+        break;
+    case SYSTEM_EVENT_AP_STOP:
+        DEBUG_MSG("WiFi access point stopped\n");
+        break;
+    case SYSTEM_EVENT_AP_STACONNECTED:
+        DEBUG_MSG("Client connected\n");
+        break;
+    case SYSTEM_EVENT_AP_STADISCONNECTED:
+        DEBUG_MSG("Client disconnected\n");
+        break;
+    case SYSTEM_EVENT_AP_STAIPASSIGNED:
+        DEBUG_MSG("Assigned IP address to client\n");
+        break;
+    case SYSTEM_EVENT_AP_PROBEREQRECVED:
+        DEBUG_MSG("Received probe request\n");
+        break;
+    case SYSTEM_EVENT_GOT_IP6:
+        DEBUG_MSG("IPv6 is preferred\n");
+        break;
+    case SYSTEM_EVENT_ETH_START:
+        DEBUG_MSG("Ethernet started\n");
+        break;
+    case SYSTEM_EVENT_ETH_STOP:
+        DEBUG_MSG("Ethernet stopped\n");
+        break;
+    case SYSTEM_EVENT_ETH_CONNECTED:
+        DEBUG_MSG("Ethernet connected\n");
+        break;
+    case SYSTEM_EVENT_ETH_DISCONNECTED:
+        DEBUG_MSG("Ethernet disconnected\n");
+        break;
+    case SYSTEM_EVENT_ETH_GOT_IP:
+        DEBUG_MSG("Obtained IP address\n");
+        break;
+    default:
+        break;
     }
 }
\ No newline at end of file
diff --git a/src/meshwifi/meshwifi.h b/src/meshwifi/meshwifi.h
index 044839ab6..9f018de0d 100644
--- a/src/meshwifi/meshwifi.h
+++ b/src/meshwifi/meshwifi.h
@@ -1,13 +1,15 @@
 #pragma once
 
+#include "configuration.h"
 #include <Arduino.h>
 #include <functional>
+
+#ifdef HAS_WIFI
 #include <WiFi.h>
+#endif
 
 void initWifi();
 
 void deinitWifi();
 
-void WiFiEvent(WiFiEvent_t event);
-
 bool isWifiAvailable();
\ No newline at end of file
diff --git a/src/nrf52/wifi-nrf52.cpp b/src/nrf52/wifi-nrf52.cpp
new file mode 100644
index 000000000..e4885add7
--- /dev/null
+++ b/src/nrf52/wifi-nrf52.cpp
@@ -0,0 +1,13 @@
+#include "meshwifi/meshhttp.h"
+#include "meshwifi/meshwifi.h"
+
+void initWifi() {}
+
+void deinitWifi() {}
+
+bool isWifiAvailable()
+{
+    return false;
+}
+
+void handleWebResponse() {}
\ No newline at end of file