diff --git a/src/graphics/TFTDisplay.cpp b/src/graphics/TFTDisplay.cpp
index fe98882b4..df1aefb3d 100644
--- a/src/graphics/TFTDisplay.cpp
+++ b/src/graphics/TFTDisplay.cpp
@@ -425,7 +425,8 @@ TFTDisplay::TFTDisplay(uint8_t address, int sda, int scl, OLEDDISPLAY_GEOMETRY g
 void TFTDisplay::display(bool fromBlank)
 {
     if (fromBlank)
-        tft->clear();
+        tft->fillScreen(TFT_BLACK);
+    // tft->clear();
     concurrency::LockGuard g(spiLock);
 
     uint16_t x, y;
diff --git a/variants/m5stack_coreink/platformio.ini b/variants/m5stack_coreink/platformio.ini
index e6aef380c..ee6d340dc 100644
--- a/variants/m5stack_coreink/platformio.ini
+++ b/variants/m5stack_coreink/platformio.ini
@@ -16,11 +16,11 @@ build_flags =
   -DM5STACK
 lib_deps = 
   ${esp32_base.lib_deps}
-  zinggjm/GxEPD2@^1.4.9
+  zinggjm/GxEPD2@^1.5.3
   lewisxhe/PCF8563_Library@^1.0.1
 lib_ignore =
   m5stack-coreink
 monitor_filters = esp32_exception_decoder
 board_build.f_cpu = 240000000L
 upload_protocol = esptool
-;upload_port = /dev/ttyACM0
+upload_port = /dev/ttyACM0
diff --git a/variants/m5stack_coreink/variant.h b/variants/m5stack_coreink/variant.h
index 0fc56477c..f19da2696 100644
--- a/variants/m5stack_coreink/variant.h
+++ b/variants/m5stack_coreink/variant.h
@@ -2,16 +2,12 @@
 #define I2C_SDA 21
 #define I2C_SCL 22
 
-// 7-07-2023 Or enable Secondary I2C Bus
-// #define I2C_SDA1 32
-// #define I2C_SCL1 33
-
 #define HAS_GPS 1
 #undef GPS_RX_PIN
 #undef GPS_TX_PIN
 // Use Secondary I2C Bus as GPS Serial
 #define GPS_RX_PIN 33
-#define GPS_TX_PIN 32
+// #define GPS_TX_PIN 32 (now used by SX1262 BUSY as GPS works with just RX)
 
 // Green LED
 #define LED_INVERTED 0
@@ -38,7 +34,9 @@
 #undef LORA_MISO
 #undef LORA_MOSI
 #undef LORA_CS
+
 #define USE_RF95
+// #define USE_SX1262
 // #define USE_SX1280
 
 #ifdef USE_RF95
@@ -52,6 +50,23 @@
 #define LORA_DIO2 RADIOLIB_NC
 #endif
 
+// https://www.waveshare.com/core1262-868m.htm
+#ifdef USE_SX1262
+#define LORA_SCK 18
+#define LORA_MISO 34
+#define LORA_MOSI 23
+#define LORA_CS 14
+#define LORA_RESET 26
+#define LORA_DIO1 25
+#define LORA_DIO2 32 // 33 // (13 not working)  //BUSY pin on SX1262
+#define SX126X_CS LORA_CS
+#define SX126X_DIO1 LORA_DIO1
+#define SX126X_BUSY LORA_DIO2
+#define SX126X_RESET LORA_RESET
+#define SX126X_DIO2_AS_RF_SWITCH
+#define SX126X_DIO3_TCXO_VOLTAGE 1.8
+#endif
+
 #ifdef USE_SX1280
 #define LORA_SCK 18
 #define LORA_MISO 34
@@ -90,5 +105,5 @@
 //   |
 //  GND
 // https://github.com/m5stack/M5Core-Ink/blob/master/examples/Basics/FactoryTest/FactoryTest.ino#L58
-#define ADC_MULTIPLIER 5 // Just a guess for now... more detailed getBatVoltage above
+#define ADC_MULTIPLIER 5
 // https://embeddedexplorer.com/esp32-adc-esp-idf-tutorial/
diff --git a/version.properties b/version.properties
index f1f958f5f..59d4670c7 100644
--- a/version.properties
+++ b/version.properties
@@ -1,4 +1,4 @@
 [VERSION]  
 major = 2
 minor = 2
-build = 18
+build = 19