pohui_pohui/firmware
1
0
Fork 0
mirror of https://github.com/meshtastic/firmware.git synced 2025-02-02 02:39:57 +00:00
Code Issues Actions 6 Packages Projects Releases Wiki Activity

Log warning cleanup and truth (#3466)

Browse Source
This commit is contained in:
Ben Meadors 2024-03-21 20:45:48 -05:00 committed by GitHub
parent 7aa013a716
commit 794e99c2f9
No known key found for this signature in database
GPG Key ID: B5690EEEBB952194
8 changed files with 10 additions and 10 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

2
src/gps/GPS.cpp
View File

@ -1278,7 +1278,7 @@ bool GPS::lookForLocation()
#ifndef TINYGPS_OPTION_NO_STATISTICS
if (reader.failedChecksum() > lastChecksumFailCount) {
LOG_WARN("Warning, %u new GPS checksum failures, for a total of %u.\n", reader.failedChecksum() - lastChecksumFailCount,
LOG_WARN("%u new GPS checksum failures, for a total of %u.\n", reader.failedChecksum() - lastChecksumFailCount,
reader.failedChecksum());
lastChecksumFailCount = reader.failedChecksum();
}

2
src/main.cpp
View File

@ -631,7 +631,7 @@ void setup()
#else
// ESP32
SPI.begin(LORA_SCK, LORA_MISO, LORA_MOSI, LORA_CS);
LOG_WARN("SPI.begin(SCK=%d, MISO=%d, MOSI=%d, NSS=%d)\n", LORA_SCK, LORA_MISO, LORA_MOSI, LORA_CS);
LOG_DEBUG("SPI.begin(SCK=%d, MISO=%d, MOSI=%d, NSS=%d)\n", LORA_SCK, LORA_MISO, LORA_MOSI, LORA_CS);
SPI.setFrequency(4000000);
#endif

2
src/mesh/MeshService.cpp
View File

@ -359,7 +359,7 @@ int MeshService::onGPSChanged(const meshtastic::GPSStatus *newStatus)
LOG_DEBUG("onGPSchanged() - lost validLocation\n");
#endif
}
// Used fixed position if configured regalrdless of GPS lock
// Used fixed position if configured regardless of GPS lock
if (config.position.fixed_position) {
LOG_WARN("Using fixed position\n");
pos = TypeConversions::ConvertToPosition(node->position);

6
src/mesh/NodeDB.cpp
View File

@ -195,7 +195,7 @@ bool NodeDB::factoryReset()
// first, remove the "/prefs" (this removes most prefs)
rmDir("/prefs");
if (FSCom.exists("/static/rangetest.csv") && !FSCom.remove("/static/rangetest.csv")) {
LOG_WARN("Could not remove rangetest.csv file\n");
LOG_ERROR("Could not remove rangetest.csv file\n");
}
// second, install default state (this will deal with the duplicate mac address issue)
installDefaultDeviceState();
@ -527,7 +527,7 @@ void NodeDB::pickNewNodeNum()
LOG_WARN("NOTE! Our desired nodenum 0x%x is invalid or in use, so trying for 0x%x\n", nodeNum, candidate);
nodeNum = candidate;
}
LOG_WARN("Using nodenum 0x%x \n", nodeNum);
LOG_DEBUG("Using nodenum 0x%x \n", nodeNum);
myNodeInfo.my_node_num = nodeNum;
}
@ -934,7 +934,7 @@ meshtastic_NodeInfoLite *NodeDB::getOrCreateMeshNode(NodeNum n)
if ((numMeshNodes >= MAX_NUM_NODES) || (memGet.getFreeHeap() < meshtastic_NodeInfoLite_size * 3)) {
if (screen)
screen->print("Warn: node database full!\nErasing oldest entry\n");
LOG_INFO("Warn: node database full!\nErasing oldest entry\n");
LOG_WARN("Node database full! Erasing oldest entry\n");
// look for oldest node and erase it
uint32_t oldest = UINT32_MAX;
int oldestIndex = -1;

2
src/mesh/RF95Interface.cpp
View File

@ -19,7 +19,7 @@ RF95Interface::RF95Interface(LockingArduinoHal *hal, RADIOLIB_PIN_TYPE cs, RADIO
RADIOLIB_PIN_TYPE busy)
: RadioLibInterface(hal, cs, irq, rst, busy)
{
LOG_WARN("RF95Interface(cs=%d, irq=%d, rst=%d, busy=%d)\n", cs, irq, rst, busy);
LOG_DEBUG("RF95Interface(cs=%d, irq=%d, rst=%d, busy=%d)\n", cs, irq, rst, busy);
}
/** Some boards require GPIO control of tx vs rx paths */

2
src/mesh/SX126xInterface.cpp
View File

@ -17,7 +17,7 @@ SX126xInterface<T>::SX126xInterface(LockingArduinoHal *hal, RADIOLIB_PIN_TYPE cs
RADIOLIB_PIN_TYPE busy)
: RadioLibInterface(hal, cs, irq, rst, busy, &lora), lora(&module)
{
LOG_WARN("SX126xInterface(cs=%d, irq=%d, rst=%d, busy=%d)\n", cs, irq, rst, busy);
LOG_DEBUG("SX126xInterface(cs=%d, irq=%d, rst=%d, busy=%d)\n", cs, irq, rst, busy);
}
/// Initialise the Driver transport hardware and software.

2
src/mesh/SX128xInterface.cpp
View File

@ -17,7 +17,7 @@ SX128xInterface<T>::SX128xInterface(LockingArduinoHal *hal, RADIOLIB_PIN_TYPE cs
RADIOLIB_PIN_TYPE busy)
: RadioLibInterface(hal, cs, irq, rst, busy, &lora), lora(&module)
{
LOG_WARN("SX128xInterface(cs=%d, irq=%d, rst=%d, busy=%d)\n", cs, irq, rst, busy);
LOG_DEBUG("SX128xInterface(cs=%d, irq=%d, rst=%d, busy=%d)\n", cs, irq, rst, busy);
}
/// Initialise the Driver transport hardware and software.

2
src/platform/esp32/SimpleAllocator.cpp
View File

@ -58,7 +58,7 @@ void *operator new(size_t sz) throw(std::bad_alloc)
void operator delete(void *ptr) throw()
{
if (activeAllocator)
LOG_DEBUG("Warning: leaking an active allocator object\n"); // We don't properly handle this yet
LOG_WARN("Leaking an active allocator object\n"); // We don't properly handle this yet
else
free(ptr);
}