pohui_pohui/firmware
1
0
Fork 0
mirror of https://github.com/meshtastic/firmware.git synced 2025-04-25 09:42:35 +00:00
Code Issues Actions 5 Packages Projects Releases Wiki Activity

Merge branch 'master' into RGBLED

Browse Source
This commit is contained in:
Ben Meadors 2024-04-21 14:46:18 -05:00 committed by GitHub
commit 84edaabfe9
No known key found for this signature in database
GPG Key ID: B5690EEEBB952194
12 changed files with 369 additions and 57 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

39
boards/ESP32-S3-WROOM-1-N4.json Normal file
View File

@ -0,0 +1,39 @@
{
"build": {
"arduino": {
"ldscript": "esp32s3_out.ld"
},
"core": "esp32",
"extra_flags": [
"-D ARDUINO_USB_CDC_ON_BOOT=0",
"-D ARDUINO_USB_MSC_ON_BOOT=0",
"-D ARDUINO_USB_DFU_ON_BOOT=0",
"-D ARDUINO_USB_MODE=0",
"-D ARDUINO_RUNNING_CORE=1",
"-D ARDUINO_EVENT_RUNNING_CORE=1"
],
"f_cpu": "240000000L",
"f_flash": "80000000L",
"flash_mode": "qio",
"hwids": [["0x303A", "0x1001"]],
"mcu": "esp32s3",
"variant": "ESP32-S3-WROOM-1-N4"
},
"connectivity": ["wifi"],
"debug": {
"default_tool": "esp-builtin",
"onboard_tools": ["esp-builtin"],
"openocd_target": "esp32s3.cfg"
},
"frameworks": ["arduino", "espidf"],
"name": "ESP32-S3-WROOM-1-N4 (4 MB Flash, No PSRAM)",
"upload": {
"flash_size": "4MB",
"maximum_ram_size": 524288,
"maximum_size": 4194304,
"require_upload_port": true,
"speed": 921600
},
"url": "https://www.espressif.com/sites/default/files/documentation/esp32-s3-wroom-1_wroom-1u_datasheet_en.pdf",
"vendor": "Espressif"
}

1
src/detect/ScanI2CTwoWire.cpp
View File

@ -279,6 +279,7 @@ void ScanI2CTwoWire::scanPort(I2CPort port)
} else { // Unknown device
LOG_INFO("No INA3221 found at address 0x%x\n", (uint8_t)addr.address);
}
break;
case MCP9808_ADDR:
registerValue = getRegisterValue(ScanI2CTwoWire::RegisterLocation(addr, 0x07), 2);
if (registerValue == 0x0400) {

28
src/gps/RTC.cpp
View File

@ -104,13 +104,15 @@ bool perhapsSetRTC(RTCQuality q, const struct timeval *tv)
bool shouldSet;
if (q > currentQuality) {
shouldSet = true;
LOG_DEBUG("Upgrading time to quality %d\n", q);
} else if (q == RTCQualityGPS && (now - lastSetMsec) > (12 * 60 * 60 * 1000UL)) {
// Every 12 hrs we will slam in a new GPS time, to correct for local RTC clock drift
LOG_DEBUG("Upgrading time to quality %s\n", RtcName(q));
} else if (q >= RTCQualityNTP && (now - lastSetMsec) > (12 * 60 * 60 * 1000UL)) {
// Every 12 hrs we will slam in a new GPS or Phone GPS / NTP time, to correct for local RTC clock drift
shouldSet = true;
LOG_DEBUG("Reapplying external time to correct clock drift %ld secs\n", tv->tv_sec);
} else
} else {
shouldSet = false;
LOG_DEBUG("Current RTC quality: %s. Ignoring time of RTC quality of %s\n", RtcName(currentQuality), RtcName(q));
}
if (shouldSet) {
currentQuality = q;
@ -162,6 +164,24 @@ bool perhapsSetRTC(RTCQuality q, const struct timeval *tv)
}
}
const char *RtcName(RTCQuality quality)
{
switch (quality) {
case RTCQualityNone:
return "None";
case RTCQualityDevice:
return "Device";
case RTCQualityFromNet:
return "Net";
case RTCQualityNTP:
return "NTP";
case RTCQualityGPS:
return "GPS";
default:
return "Unknown";
}
}
/**
* Sets the RTC time if the provided time is of higher quality than the current RTC time.
*

3
src/gps/RTC.h
View File

@ -28,6 +28,9 @@ RTCQuality getRTCQuality();
bool perhapsSetRTC(RTCQuality q, const struct timeval *tv);
bool perhapsSetRTC(RTCQuality q, struct tm &t);
/// Return a string name for the quality
const char *RtcName(RTCQuality quality);
/// Return time since 1970 in secs. While quality is RTCQualityNone we will be returning time based at zero
uint32_t getTime(bool local = false);

7
src/mesh/NodeDB.h
View File

@ -150,12 +150,13 @@ class NodeDB
void setLocalPosition(meshtastic_Position position, bool timeOnly = false)
{
if (timeOnly) {
LOG_DEBUG("Setting local position time only: time=%i\n", position.time);
LOG_DEBUG("Setting local position time only: time=%u timestamp=%u\n", position.time, position.timestamp);
localPosition.time = position.time;
localPosition.timestamp = position.timestamp > 0 ? position.timestamp : position.time;
return;
}
LOG_DEBUG("Setting local position: latitude=%i, longitude=%i, time=%i\n", position.latitude_i, position.longitude_i,
position.time);
LOG_DEBUG("Setting local position: latitude=%i, longitude=%i, time=%u, timestamp=%u\n", position.latitude_i,
position.longitude_i, position.time, position.timestamp);
localPosition = position;
}

3
src/modules/ExternalNotificationModule.cpp
View File

@ -303,7 +303,8 @@ void ExternalNotificationModule::stopNow()
{
rtttl::stop();
#ifdef HAS_I2S
audioThread->stop();
if (audioThread->isPlaying())
audioThread->stop();
#endif
nagCycleCutoff = 1; // small value
isNagging = false;

94
src/modules/PositionModule.cpp
View File

@ -17,6 +17,7 @@
extern "C" {
#include "mesh/compression/unishox2.h"
#include <Throttle.h>
}
PositionModule *positionModule;
@ -63,21 +64,15 @@ bool PositionModule::handleReceivedProtobuf(const meshtastic_MeshPacket &mp, mes
}
// Log packet size and data fields
LOG_INFO("POSITION node=%08x l=%d latI=%d lonI=%d msl=%d hae=%d geo=%d pdop=%d hdop=%d vdop=%d siv=%d fxq=%d fxt=%d pts=%d "
"time=%d\n",
getFrom(&mp), mp.decoded.payload.size, p.latitude_i, p.longitude_i, p.altitude, p.altitude_hae,
p.altitude_geoidal_separation, p.PDOP, p.HDOP, p.VDOP, p.sats_in_view, p.fix_quality, p.fix_type, p.timestamp,
p.time);
LOG_DEBUG("POSITION node=%08x l=%d latI=%d lonI=%d msl=%d hae=%d geo=%d pdop=%d hdop=%d vdop=%d siv=%d fxq=%d fxt=%d pts=%d "
"time=%d\n",
getFrom(&mp), mp.decoded.payload.size, p.latitude_i, p.longitude_i, p.altitude, p.altitude_hae,
p.altitude_geoidal_separation, p.PDOP, p.HDOP, p.VDOP, p.sats_in_view, p.fix_quality, p.fix_type, p.timestamp,
p.time);
if (p.time && channels.getByIndex(mp.channel).role == meshtastic_Channel_Role_PRIMARY) {
struct timeval tv;
uint32_t secs = p.time;
tv.tv_sec = secs;
tv.tv_usec = 0;
// Set from phone RTC Quality to RTCQualityNTP since it should be approximately so
perhapsSetRTC(isLocal ? RTCQualityNTP : RTCQualityFromNet, &tv);
trySetRtc(p, isLocal);
}
nodeDB->updatePosition(getFrom(&mp), p);
@ -92,6 +87,16 @@ bool PositionModule::handleReceivedProtobuf(const meshtastic_MeshPacket &mp, mes
return false; // Let others look at this message also if they want
}
void PositionModule::trySetRtc(meshtastic_Position p, bool isLocal)
{
struct timeval tv;
uint32_t secs = p.time;
tv.tv_sec = secs;
tv.tv_usec = 0;
perhapsSetRTC(isLocal ? RTCQualityNTP : RTCQualityFromNet, &tv);
}
meshtastic_MeshPacket *PositionModule::allocReply()
{
if (precision == 0) {
@ -222,6 +227,16 @@ meshtastic_MeshPacket *PositionModule::allocAtakPli()
return mp;
}
void PositionModule::sendOurPosition()
{
bool requestReplies = currentGeneration != radioGeneration;
currentGeneration = radioGeneration;
// If we changed channels, ask everyone else for their latest info
LOG_INFO("Sending pos@%x:6 to mesh (wantReplies=%d)\n", localPosition.timestamp, requestReplies);
sendOurPosition(NODENUM_BROADCAST, requestReplies);
}
void PositionModule::sendOurPosition(NodeNum dest, bool wantReplies, uint8_t channel)
{
// cancel any not yet sent (now stale) position packets
@ -299,12 +314,7 @@ int32_t PositionModule::runOnce()
lastGpsLatitude = node->position.latitude_i;
lastGpsLongitude = node->position.longitude_i;
// If we changed channels, ask everyone else for their latest info
bool requestReplies = currentGeneration != radioGeneration;
currentGeneration = radioGeneration;
LOG_INFO("Sending pos@%x:6 to mesh (wantReplies=%d)\n", localPosition.timestamp, requestReplies);
sendOurPosition(NODENUM_BROADCAST, requestReplies);
sendOurPosition();
if (config.device.role == meshtastic_Config_DeviceConfig_Role_LOST_AND_FOUND) {
sendLostAndFoundText();
}
@ -314,29 +324,23 @@ int32_t PositionModule::runOnce()
if (hasValidPosition(node2)) {
// The minimum time (in seconds) that would pass before we are able to send a new position packet.
const uint32_t minimumTimeThreshold =
Default::getConfiguredOrDefaultMs(config.position.broadcast_smart_minimum_interval_secs, 30);
auto smartPosition = getDistanceTraveledSinceLastSend(node->position);
uint32_t msSinceLastSend = now - lastGpsSend;
if (smartPosition.hasTraveledOverThreshold && msSinceLastSend >= minimumTimeThreshold) {
bool requestReplies = currentGeneration != radioGeneration;
currentGeneration = radioGeneration;
if (smartPosition.hasTraveledOverThreshold &&
Throttle::execute(
&lastGpsSend, minimumTimeThreshold, []() { positionModule->sendOurPosition(); },
[]() { LOG_DEBUG("Skipping send smart broadcast due to time throttling\n"); })) {
LOG_INFO("Sending smart pos@%x:6 to mesh (distanceTraveled=%fm, minDistanceThreshold=%im, timeElapsed=%ims, "
"minTimeInterval=%ims)\n",
localPosition.timestamp, smartPosition.distanceTraveled, smartPosition.distanceThreshold,
msSinceLastSend, minimumTimeThreshold);
sendOurPosition(NODENUM_BROADCAST, requestReplies);
LOG_DEBUG("Sent smart pos@%x:6 to mesh (distanceTraveled=%fm, minDistanceThreshold=%im, timeElapsed=%ims, "
"minTimeInterval=%ims)\n",
localPosition.timestamp, smartPosition.distanceTraveled, smartPosition.distanceThreshold,
msSinceLastSend, minimumTimeThreshold);
// Set the current coords as our last ones, after we've compared distance with current and decided to send
lastGpsLatitude = node->position.latitude_i;
lastGpsLongitude = node->position.longitude_i;
/* Update lastGpsSend to now. This means if the device is stationary, then
getPref_position_broadcast_secs will still apply.
*/
lastGpsSend = now;
}
}
}
@ -396,27 +400,21 @@ void PositionModule::handleNewPosition()
meshtastic_NodeInfoLite *node = nodeDB->getMeshNode(nodeDB->getNodeNum());
const meshtastic_NodeInfoLite *node2 = service.refreshLocalMeshNode(); // should guarantee there is now a position
// We limit our GPS broadcasts to a max rate
uint32_t now = millis();
uint32_t msSinceLastSend = now - lastGpsSend;
if (hasValidPosition(node2)) {
auto smartPosition = getDistanceTraveledSinceLastSend(node->position);
if (smartPosition.hasTraveledOverThreshold) {
bool requestReplies = currentGeneration != radioGeneration;
currentGeneration = radioGeneration;
LOG_INFO("Sending smart pos@%x:6 to mesh (distanceTraveled=%fm, minDistanceThreshold=%im, timeElapsed=%ims)\n",
localPosition.timestamp, smartPosition.distanceTraveled, smartPosition.distanceThreshold, msSinceLastSend);
sendOurPosition(NODENUM_BROADCAST, requestReplies);
uint32_t msSinceLastSend = millis() - lastGpsSend;
if (smartPosition.hasTraveledOverThreshold &&
Throttle::execute(
&lastGpsSend, minimumTimeThreshold, []() { positionModule->sendOurPosition(); },
[]() { LOG_DEBUG("Skipping send smart broadcast due to time throttling\n"); })) {
LOG_DEBUG("Sent smart pos@%x:6 to mesh (distanceTraveled=%fm, minDistanceThreshold=%im, timeElapsed=%ims, "
"minTimeInterval=%ims)\n",
localPosition.timestamp, smartPosition.distanceTraveled, smartPosition.distanceThreshold, msSinceLastSend,
minimumTimeThreshold);
// Set the current coords as our last ones, after we've compared distance with current and decided to send
lastGpsLatitude = node->position.latitude_i;
lastGpsLongitude = node->position.longitude_i;
/* Update lastGpsSend to now. This means if the device is stationary, then
getPref_position_broadcast_secs will still apply.
*/
lastGpsSend = now;
}
}
}

8
src/modules/PositionModule.h
View File

@ -1,4 +1,5 @@
#pragma once
#include "Default.h"
#include "ProtobufModule.h"
#include "concurrency/OSThread.h"
@ -29,7 +30,8 @@ class PositionModule : public ProtobufModule<meshtastic_Position>, private concu
/**
* Send our position into the mesh
*/
void sendOurPosition(NodeNum dest = NODENUM_BROADCAST, bool wantReplies = false, uint8_t channel = 0);
void sendOurPosition(NodeNum dest, bool wantReplies = false, uint8_t channel = 0);
void sendOurPosition();
void handleNewPosition();
@ -50,8 +52,12 @@ class PositionModule : public ProtobufModule<meshtastic_Position>, private concu
private:
struct SmartPosition getDistanceTraveledSinceLastSend(meshtastic_PositionLite currentPosition);
meshtastic_MeshPacket *allocAtakPli();
void trySetRtc(meshtastic_Position p, bool isLocal);
uint32_t precision;
void sendLostAndFoundText();
const uint32_t minimumTimeThreshold =
Default::getConfiguredOrDefaultMs(config.position.broadcast_smart_minimum_interval_secs, 30);
};
struct SmartPosition {

4
src/platform/esp32/architecture.h
View File

@ -127,6 +127,10 @@
#define HW_VENDOR meshtastic_HardwareModel_BETAFPV_900_NANO_TX
#elif defined(PICOMPUTER_S3)
#define HW_VENDOR meshtastic_HardwareModel_PICOMPUTER_S3
#elif defined(HELTEC_HT62)
#define HW_VENDOR meshtastic_HardwareModel_HELTEC_HT62
#elif defined(EBYTE_ESP32_S3)
#define HW_VENDOR meshtastic_HardwareModel_EBYTE_ESP32_S3
#elif defined(ESP32_S3_PICO)
#define HW_VENDOR meshtastic_HardwareModel_ESP32_S3_PICO
#elif defined(SENSELORA_S3)

37
variants/EBYTE_ESP32-S3/pins_arduino.h Normal file
View File

@ -0,0 +1,37 @@
// Need this file for ESP32-S3
// No need to modify this file, changes to pins imported from variant.h
// Most is similar to https://github.com/espressif/arduino-esp32/blob/master/variants/esp32s3/pins_arduino.h
#ifndef Pins_Arduino_h
#define Pins_Arduino_h
#include <stdint.h>
#include <variant.h>
#define USB_VID 0x303a
#define USB_PID 0x1001
#define EXTERNAL_NUM_INTERRUPTS 46
#define NUM_DIGITAL_PINS 48
#define NUM_ANALOG_INPUTS 20
#define analogInputToDigitalPin(p) (((p) < 20) ? (analogChannelToDigitalPin(p)) : -1)
#define digitalPinToInterrupt(p) \
(((p) < 48) ? (p) : -1) // Maybe it should be <= 48 but this is from a trustworthy source so it is likely correct
#define digitalPinHasPWM(p) (p < 46)
// Serial
static const uint8_t TX = UART_TX;
static const uint8_t RX = UART_RX;
// Default SPI will be mapped to Radio
static const uint8_t SS = LORA_CS;
static const uint8_t SCK = LORA_SCK;
static const uint8_t MOSI = LORA_MOSI;
static const uint8_t MISO = LORA_MISO;
// The default Wire will be mapped to PMU and RTC
static const uint8_t SCL = I2C_SCL;
static const uint8_t SDA = I2C_SDA;
#endif /* Pins_Arduino_h */

9
variants/EBYTE_ESP32-S3/platformio.ini Normal file
View File

@ -0,0 +1,9 @@
[env:EBYTE_ESP32-S3]
extends = esp32s3_base
; board assumes the lowest spec WROOM module: 4 MB (Quad SPI) Flash, No PSRAM
board = ESP32-S3-WROOM-1-N4
board_level = extra
build_flags =
${esp32s3_base.build_flags}
-D EBYTE_ESP32_S3
-I variants/EBYTE_ESP32-S3

193
variants/EBYTE_ESP32-S3/variant.h Normal file
View File

@ -0,0 +1,193 @@
// Supporting information: https://github.com/S5NC/EBYTE_ESP32-S3/
// Originally developed for E22-900M30S with ESP32-S3-WROOM-1-N4
// NOTE: Uses ESP32-S3-WROOM-1-N4.json in boards folder (via platformio.ini board field), assumes 4 MB (quad SPI) flash, no PSRAM
// FIXME: implement SX12 module type autodetection and have setup for each case (add E32 support)
// E32 has same pinout except having extra pins. I assume that the GND on it is connected internally to other GNDs so it is not a
// problem to NC the extra GND pins.
// For each EBYTE module pin in this section, provide the pin number of the ESP32-S3 you connected it to
// The ESP32-S3 is great because YOU CAN USE PRACTICALLY ANY PINS for the connections, but avoid some pins (such as on the WROOM
// modules the following): strapping pins (except 0 as a user button input as it already has a pulldown resistor in typical
// application schematic) (0, 3, 45, 46), USB-reserved (19, 20), and pins which aren't present on the WROOM-2 module for
// compatiblity as it uses octal SPI, or are likely connected internally in either WROOM version (26-37), and avoid pins whose
// voltages are set by the SPI voltage (47, 48), and pins that don't exist (22-25) You can ALSO set the SPI pins (SX126X_CS,
// SX126X_SCK, SX126X_MISO, SX126X_MOSI) to any pin with the ESP32-S3 due to \ GPIO Matrix / IO MUX / RTC IO MUX \, and also the
// serial pins, but this isn't recommended for Serial0 as the WROOM modules have a 499 Ohm resistor on U0TXD (to reduce harmonics
// but also acting as a sort of protection)
// We have many free pins on the ESP32-S3-WROOM-X-Y module, perhaps it is best to use one of its pins to control TXEN, and use
// DIO2 as an extra interrupt, but right now Meshtastic does not benefit from having another interrupt pin available.
// Adding two 0-ohm links on your PCB design so that you can choose between the two modes for controlling the E22's TXEN would
// enable future software to make the most of an extra available interrupt pin
// Possible improvement: can add extremely low resistance MOSFET to physically toggle power to E22 module when in full sleep (not
// waiting for interrupt)?
// PA stands for Power Amplifier, used when transmitting to increase output power
// LNA stands for Low Noise Amplifier, used when \ listening for / receiving \ data to increase sensitivity
//////////////////////////////////////////////////////////////////////////////////
// //
// Have custom connections or functionality? Configure them in this section //
// //
//////////////////////////////////////////////////////////////////////////////////
#define SX126X_CS 14 // EBYTE module's NSS pin // FIXME: rename to SX126X_SS
#define LORA_SCK 21 // EBYTE module's SCK pin
#define LORA_MOSI 38 // EBYTE module's MOSI pin
#define LORA_MISO 39 // EBYTE module's MISO pin
#define SX126X_RESET 40 // EBYTE module's NRST pin
#define SX126X_BUSY 41 // EBYTE module's BUSY pin
#define SX126X_DIO1 42 // EBYTE module's DIO1 pin
// We don't define a pin for SX126X_DIO2 as Meshtastic doesn't use it as an interrupt output, so it is never connected to an MCU
// pin! Also E22 module datasheets say not to connect it to an MCU pin.
// We don't define a pin for SX126X_DIO3 as Meshtastic doesn't use it as an interrupt output, so it is never connected to an MCU
// pin! Also E22 module datasheets say to use it as the TCXO's reference voltage.
// E32 module (which uses SX1276) may not have ability to set TCXO voltage using a DIO pin.
// The radio module needs to be told whether to enable RX mode or TX mode. Each radio module takes different actions based on
// these values, but generally the path from the antenna to SX1262 is changed from signal output to signal input. Also, if there
// are LNAs (Low-Noise Amplifiers) or PAs (Power Amplifiers) in the output or input paths, their power is also controlled by
// these pins. You should never have both TXEN and RXEN set high, this can cause problems for some radio modules, and is
// commonly referred to as 'undefined behaviour' in datasheets. For the SX1262, you shouldn't connect DIO2 to the MCU. DIO2 is
// an output only, and can be controlled via SPI instructions, the use for this is to save an MCU pin by using the DIO2 pin to
// control the RF switching mode.
// Choose ONLY ONE option from below, comment in/out the '/*'s and '*/'s
// SX126X_TXEN is the E22's [SX1262's] TXEN pin, SX126X_RXEN is the E22's [SX1262's] RXEN pin
// Option 1: E22's TXEN pin connected to E22's DIO2 pin, E22's RXEN pin connected to NEGATED output of E22's DIO2 pin (more
// expensive option hardware-wise, is the 'most proper' way, removes need for routing one/two traces from MCU to RF switching
// pins), however you can't have E22 in low-power 'sleep' mode (TXEN and RXEN both low cannot be achieved this this option).
/*
#define SX126X_DIO2_AS_RF_SWITCH
#define SX126X_TXEN RADIOLIB_NC
#define SX126X_RXEN RADIOLIB_NC
*/
// Option 2: E22's TXEN pin connected to E22's DIO2 pin, E22's RXEN pin connected to MCU pin (cheaper option hardware-wise,
// removes need for routing another trace from MCU to an RF switching pin).
// /*
#define SX126X_DIO2_AS_RF_SWITCH
#define SX126X_TXEN RADIOLIB_NC
#define SX126X_RXEN 10
// */
// Option 3: E22's TXEN pin connected to MCU pin, E22's RXEN pin connected to MCU pin (cheaper option hardware-wise, allows for
// ramping up PA before transmission (add/expand on feature yourself in RadioLib) if PA takes a while to stabilise)
// Don't define DIO2_AS_RF_SWITCH because we only use DIO2 or an MCU pin mutually exclusively to connect to E22's TXEN (to prevent
// a short if they are both connected at the same time (suboptimal PCB design) and there's a slight non-neglibible delay and/or
// voltage difference between DIO2 and TXEN). Can use DIO2 as an IRQ (but not in Meshtastic at the moment).
/*
#define SX126X_TXEN 9
#define SX126X_RXEN 10
*/
// (NOT RECOMMENDED, if need to ramp up PA before transmission, better to use option 3)
// Option 4: E22's TXEN pin connected to MCU pin, E22's RXEN pin connected to NEGATED output of E22's DIO2 pin (more expensive
// option hardware-wise, allows for ramping up PA before transmission (add/expand on feature yourself in RadioLib) if PA takes
// a while to stabilise, removes need for routing another trace from MCU to an RF switching pin, however may mean if in
// RadioLib you don't tell DIO2 to go high to indicate transmission (so the negated output goes to RXEN to turn the LNA off)
// then you may end up enabling E22's TXEN and RXEN pins at the same time whilst you ramp up the PA which is not ideal,
// changing DIO2's switching advance in RadioLib may not even be possible, may be baked into the SX126x).
/*
#define SX126X_DIO2_AS_RF_SWITCH
#define SX126X_TXEN 9
#define SX126X_RXEN RADIOLIB_NC
*/
// Status
#define LED_PIN 1
#define LED_INVERTED 0
// External notification
// FIXME: Check if EXT_NOTIFY_OUT actualy has any effect and removes the need for setting the external notication pin in the
// app/preferences
#define EXT_NOTIFY_OUT 2 // The GPIO pin that acts as the external notification output (here we connect an LED to it)
// Buzzer
#define PIN_BUZZER 11
// Buttons
#define BUTTON_PIN 0 // Use the BOOT button as the user button
// I2C
#define I2C_SCL 18
#define I2C_SDA 8
// UART
#define UART_TX 43
#define UART_RX 44
// Power
// Outputting 22dBm from SX1262 results in ~30dBm E22-900M30S output (module only uses last stage of the YP2233W PA)
// Respect local regulations! If your E22-900M30S outputs the advertised 30 dBm and you use a 6 dBi antenna, you are at the
// equivalent of 36 EIRP (Effective Isotropic Radiated Power), which in this case is the limit for non-HAM users in the US (4W
// EIRP, at SPECIFIC frequencies).
// In the EU (and UK), as of now, you are allowed 27 dBm ERP which is 29.15 EIRP.
// https://eur-lex.europa.eu/legal-content/EN/TXT/?uri=CELEX:32022D0180
// https://www.legislation.gov.uk/uksi/1999/930/schedule/6/made
// To respect the 29.15 dBm EIRP (at SPECIFIC frequencies, others are lower) EU limit with a 2.5 dBi gain antenna, consulting
// https://github.com/S5NC/EBYTE_ESP32-S3/blob/main/power%20testing.txt, assuming 0.1 dBm insertion loss, output 20 dBm from the
// E22-900M30S's SX1262. It is worth noting that if you are in this situation and don't have a HAM license, you may be better off
// with a lower gain antenna, and output the difference as a higher total power input into the antenna, as your EIRP would be the
// same, but you would get a wider angle of coverage. Also take insertion loss and possibly VSWR into account
// (https://www.everythingrf.com/tech-resources/vswr). Please check regulations yourself and check airtime, usage (for example
// whether you are airborne), frequency, and power laws.
#define SX126X_MAX_POWER 22 // SX126xInterface.cpp defaults to 22 if not defined, but here we define it for good practice
// Display
// FIXME: change behavior in src to default to not having screen if is undefined
// FIXME: remove 0/1 option for HAS_SCREEN in src, change to being defined or not
// FIXME: check if it actually causes a crash when not specifiying that a display isn't present
#define HAS_SCREEN 0 // Assume no screen present by default to prevent crash...
// GPS
// FIXME: unsure what to define HAS_GPS as if GPS isn't always present
#define HAS_GPS 1 // Don't need to set this to 0 to prevent a crash as it doesn't crash if GPS not found, will probe by default
#define PIN_GPS_EN 15
#define GPS_EN_ACTIVE 1
#define GPS_TX_PIN 16
#define GPS_RX_PIN 17
/////////////////////////////////////////////////////////////////////////////////
// //
// You should have no need to modify the code below, nor in pins_arduino.h //
// //
/////////////////////////////////////////////////////////////////////////////////
#define USE_SX1262 // E22-900M30S, E22-900M22S, and E22-900MM22S (not E220!) use SX1262
#define USE_SX1268 // E22-400M30S, E22-400M33S, E22-400M22S, and E22-400MM22S use SX1268
// The below isn't needed as we directly define SX126X_TXEN and SX126X_RXEN instead of using proxies E22_TXEN and E22_RXEN
/*
// FALLBACK: If somehow E22_TXEN isn't defined or clearly isn't a valid pin number, set it to RADIOLIB_NC to avoid SX126X_TXEN
being defined but having no value #if (!defined(E22_TXEN) || !(0 <= E22_TXEN && E22_TXEN <= 48)) #define E22_TXEN RADIOLIB_NC
#endif
// FALLBACK: If somehow E22_RXEN isn't defined or clearly isn't a valid pin number, set it to RADIOLIB_NC to avoid SX126X_RXEN
being defined but having no value #if (!defined(E22_RXEN) || !(0 <= E22_RXEN && E22_RXEN <= 48)) #define E22_RXEN RADIOLIB_NC
#endif
#define SX126X_TXEN E22_TXEN
#define SX126X_RXEN E22_RXEN
*/
// E22 series TCXO voltage is 1.8V per https://www.ebyte.com/en/pdf-down.aspx?id=781 (source
// https://github.com/jgromes/RadioLib/issues/12#issuecomment-520695575), so set it as such
#define SX126X_DIO3_TCXO_VOLTAGE 1.8
#define LORA_CS SX126X_CS // FIXME: for some reason both are used in /src
// Many of the below values would only be used if USE_RF95 was defined, but it's not as we aren't actually using an RF95, just
// that the 4 pins above are named like it If they aren't used they don't need to be defined and doing so cause confusion to those
// adapting this file LORA_RESET value is never used in src (as we are not using RF95), so no need to define LORA_DIO0 is not used
// in src (as we are not using RF95) as SX1262 does not have it per SX1262 datasheet, so no need to define
// FIXME: confirm that the linked lines below are actually only called when using the SX126x or SX128x and no other modules
// then use SX126X_DIO1 and SX128X_DIO1 respectively for that purpose, removing the need for RF95-style LORA_* definitions when
// the RF95 isn't used
#define LORA_DIO1 \
SX126X_DIO1 // The old name is used in
// https://github.com/meshtastic/firmware/blob/7eff5e7bcb2084499b723c5e3846c15ee089e36d/src/sleep.cpp#L298, so
// must also define the old name
// LORA_DIO2 value is never used in src (as we are not using RF95), so no need to define, and if DIO2_AS_RF_SWITCH is set then it
// cannot serve any extra function even if requested to LORA_DIO3 value is never used in src (as we are not using RF95), so no
// need to define, and DIO3_AS_TCXO_AT_1V8 is set so it cannot serve any extra function even if requested to (from 13.3.2.1
// DioxMask in SX1262 datasheet: Note that if DIO2 or DIO3 are used to control the RF Switch or the TCXO, the IRQ will not be
// generated even if it is mapped to the pins.)