From 8b16367597cad303df923690cd9916d7b2dc646f Mon Sep 17 00:00:00 2001 From: HookdomPonix <83303405+HookdomPonix@users.noreply.github.com> Date: Mon, 13 Nov 2023 05:20:49 -0700 Subject: [PATCH] Add support for the rak10701 board, no touch (#2933) * Add support for the rak10701 board, no touch * Moved tftblack fillin and changed teh src flags * Added rak10701 to platformio.ini --------- Co-authored-by: Ben Meadors --- platformio.ini | 1 + src/graphics/Screen.h | 2 +- src/graphics/TFTDisplay.cpp | 28 ++- variants/rak10701/platformio.ini | 18 ++ variants/rak10701/variant.cpp | 41 ++++ variants/rak10701/variant.h | 329 +++++++++++++++++++++++++++++++ 6 files changed, 413 insertions(+), 6 deletions(-) create mode 100644 variants/rak10701/platformio.ini create mode 100644 variants/rak10701/variant.cpp create mode 100644 variants/rak10701/variant.h diff --git a/platformio.ini b/platformio.ini index 4c6bc9bfa..cb79565f1 100644 --- a/platformio.ini +++ b/platformio.ini @@ -26,6 +26,7 @@ ;default_envs = meshtastic-dr-dev ;default_envs = m5stack-coreink ;default_envs = rak4631 +;default_envs = rak10701 default_envs = wio-e5 extra_configs = diff --git a/src/graphics/Screen.h b/src/graphics/Screen.h index d6fb7b5d3..554fa0aeb 100644 --- a/src/graphics/Screen.h +++ b/src/graphics/Screen.h @@ -390,7 +390,7 @@ class Screen : public concurrency::OSThread SH1106Wire dispdev; #elif defined(USE_SSD1306) SSD1306Wire dispdev; -#elif defined(ST7735_CS) || defined(ILI9341_DRIVER) || defined(ST7789_CS) +#elif defined(ST7735_CS) || defined(ILI9341_DRIVER) || defined(ST7789_CS) || defined(RAK14014) TFTDisplay dispdev; #elif defined(USE_EINK) EInkDisplay dispdev; diff --git a/src/graphics/TFTDisplay.cpp b/src/graphics/TFTDisplay.cpp index 5eec2b200..63db8120a 100644 --- a/src/graphics/TFTDisplay.cpp +++ b/src/graphics/TFTDisplay.cpp @@ -105,6 +105,10 @@ class LGFX : public lgfx::LGFX_Device static LGFX tft; +#elif defined(RAK14014) +#include +TFT_eSPI tft = TFT_eSPI(); + #elif defined(ST7789_CS) #include // Graphics and font library for ST7735 driver chip @@ -327,7 +331,7 @@ static TFT_eSPI tft = TFT_eSPI(); // Invoke library, pins defined in User_Setup. #endif -#if defined(ST7735_CS) || defined(ST7789_CS) || defined(ILI9341_DRIVER) +#if defined(ST7735_CS) || defined(ST7789_CS) || defined(ILI9341_DRIVER) || defined(RAK14014) #include "SPILock.h" #include "TFTDisplay.h" #include @@ -393,7 +397,9 @@ void TFTDisplay::sendCommand(uint8_t com) #ifdef VTFT_CTRL digitalWrite(VTFT_CTRL, LOW); #endif -#ifndef M5STACK + +#ifdef RAK14014 +#elif !defined(M5STACK) tft.setBrightness(128); #endif break; @@ -419,7 +425,8 @@ void TFTDisplay::sendCommand(uint8_t com) #ifdef VTFT_CTRL digitalWrite(VTFT_CTRL, HIGH); #endif -#ifndef M5STACK +#ifdef RAK14014 +#elif !defined(M5STACK) tft.setBrightness(0); #endif break; @@ -441,7 +448,8 @@ void TFTDisplay::flipScreenVertically() bool TFTDisplay::hasTouch(void) { -#ifndef M5STACK +#ifdef RAK14014 +#elif !defined(M5STACK) return tft.touch() != nullptr; #else return false; @@ -450,7 +458,8 @@ bool TFTDisplay::hasTouch(void) bool TFTDisplay::getTouch(int16_t *x, int16_t *y) { -#ifndef M5STACK +#ifdef RAK14014 +#elif !defined(M5STACK) return tft.getTouch(x, y); #else return false; @@ -471,6 +480,9 @@ bool TFTDisplay::connect() #ifdef TFT_BL digitalWrite(TFT_BL, TFT_BACKLIGHT_ON); pinMode(TFT_BL, OUTPUT); + // pinMode(PIN_3V3_EN, OUTPUT); + // digitalWrite(PIN_3V3_EN, HIGH); + LOG_INFO("Power to TFT Backlight\n"); #endif #ifdef ST7735_BACKLIGHT_EN_V03 @@ -484,8 +496,13 @@ bool TFTDisplay::connect() #endif tft.init(); + #if defined(M5STACK) tft.setRotation(0); +#elif defined(RAK14014) + tft.setRotation(1); + tft.setSwapBytes(true); +// tft.fillScreen(TFT_BLACK); #elif defined(T_DECK) || defined(PICOMPUTER_S3) tft.setRotation(1); // T-Deck has the TFT in landscape #elif defined(T_WATCH_S3) @@ -494,6 +511,7 @@ bool TFTDisplay::connect() tft.setRotation(3); // Orient horizontal and wide underneath the silkscreen name label #endif tft.fillScreen(TFT_BLACK); + return true; } diff --git a/variants/rak10701/platformio.ini b/variants/rak10701/platformio.ini new file mode 100644 index 000000000..736329eb8 --- /dev/null +++ b/variants/rak10701/platformio.ini @@ -0,0 +1,18 @@ +; The very slick RAK wireless RAK10701 Field Tester device. Note you will have to flash to Arduino bootloader to use this firmware. Be aware touch is not currently working. +[env:rak10701] +extends = nrf52840_base +board = wiscore_rak4631 +build_flags = ${nrf52840_base.build_flags} -Ivariants/rak10701 -D RAK_4631 + -L "${platformio.libdeps_dir}/${this.__env__}/BSEC2 Software Library/src/cortex-m4/fpv4-sp-d16-hard" + -DGPS_POWER_TOGGLE ; comment this line to disable triple press function on the user button to turn off gps entirely. +build_src_filter = ${nrf52_base.build_src_filter} +<../variants/rak10701> + + + +lib_deps = + ${nrf52840_base.lib_deps} + ${networking_base.lib_deps} + melopero/Melopero RV3028@^1.1.0 + https://github.com/RAKWireless/RAK13800-W5100S.git#1.0.2 + rakwireless/RAKwireless NCP5623 RGB LED library@^1.0.2 + bodmer/TFT_eSPI +debug_tool = jlink +; If not set we will default to uploading over serial (first it forces bootloader entry by talking 1200bps to cdcacm) +;upload_protocol = jlink \ No newline at end of file diff --git a/variants/rak10701/variant.cpp b/variants/rak10701/variant.cpp new file mode 100644 index 000000000..2b4bd39a6 --- /dev/null +++ b/variants/rak10701/variant.cpp @@ -0,0 +1,41 @@ +/* + Copyright (c) 2014-2015 Arduino LLC. All right reserved. + Copyright (c) 2016 Sandeep Mistry All right reserved. + Copyright (c) 2018, Adafruit Industries (adafruit.com) + + This library is free software; you can redistribute it and/or + modify it under the terms of the GNU Lesser General Public + License as published by the Free Software Foundation; either + version 2.1 of the License, or (at your option) any later version. + + This library is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. + See the GNU Lesser General Public License for more details. + + You should have received a copy of the GNU Lesser General Public + License along with this library; if not, write to the Free Software + Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA +*/ + +#include "variant.h" +#include "nrf.h" +#include "wiring_constants.h" +#include "wiring_digital.h" + +const uint32_t g_ADigitalPinMap[] = { + // P0 + 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24, 25, 26, 27, 28, 29, 30, 31, + + // P1 + 32, 33, 34, 35, 36, 37, 38, 39, 40, 41, 42, 43, 44, 45, 46, 47}; + +void initVariant() +{ + // LED1 & LED2 + pinMode(PIN_LED1, OUTPUT); + ledOff(PIN_LED1); + + pinMode(PIN_LED2, OUTPUT); + ledOff(PIN_LED2); +} \ No newline at end of file diff --git a/variants/rak10701/variant.h b/variants/rak10701/variant.h new file mode 100644 index 000000000..3b771d62b --- /dev/null +++ b/variants/rak10701/variant.h @@ -0,0 +1,329 @@ +/* + Copyright (c) 2014-2015 Arduino LLC. All right reserved. + Copyright (c) 2016 Sandeep Mistry All right reserved. + Copyright (c) 2018, Adafruit Industries (adafruit.com) + + This library is free software; you can redistribute it and/or + modify it under the terms of the GNU Lesser General Public + License as published by the Free Software Foundation; either + version 2.1 of the License, or (at your option) any later version. + This library is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. + See the GNU Lesser General Public License for more details. + You should have received a copy of the GNU Lesser General Public + License along with this library; if not, write to the Free Software + Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA +*/ + +#ifndef _VARIANT_RAK4630_ +#define _VARIANT_RAK4630_ + +#define RAK4630 + +/** Master clock frequency */ +#define VARIANT_MCK (64000000ul) + +#define USE_LFXO // Board uses 32khz crystal for LF +// define USE_LFRC // Board uses RC for LF + +/*---------------------------------------------------------------------------- + * Headers + *----------------------------------------------------------------------------*/ + +#include "WVariant.h" + +#ifdef __cplusplus +extern "C" { +#endif // __cplusplus + +// Number of pins defined in PinDescription array +#define PINS_COUNT (48) +#define NUM_DIGITAL_PINS (48) +#define NUM_ANALOG_INPUTS (6) +#define NUM_ANALOG_OUTPUTS (0) + +// LEDs +#define PIN_LED1 (35) +#define PIN_LED2 (36) + +#define LED_BUILTIN PIN_LED1 +#define LED_CONN PIN_LED2 + +#define LED_GREEN PIN_LED1 +#define LED_BLUE PIN_LED2 + +#define LED_STATE_ON 1 // State when LED is litted + +/* + * Buttons + */ + +#define PIN_BUTTON1 9 // Pin for button on E-ink button module or IO expansion such as the RAK14014 or RAK14015 TFT modules +#define BUTTON_NEED_PULLUP +#define PIN_BUTTON2 12 +#define PIN_BUTTON3 24 +#define PIN_BUTTON4 25 + +/* + * Analog pins + */ +#define PIN_A0 (5) +#define PIN_A1 (31) +#define PIN_A2 (28) +#define PIN_A3 (29) +#define PIN_A4 (30) +#define PIN_A5 (31) +#define PIN_A6 (0xff) +#define PIN_A7 (0xff) + +static const uint8_t A0 = PIN_A0; +static const uint8_t A1 = PIN_A1; +static const uint8_t A2 = PIN_A2; +static const uint8_t A3 = PIN_A3; +static const uint8_t A4 = PIN_A4; +static const uint8_t A5 = PIN_A5; +static const uint8_t A6 = PIN_A6; +static const uint8_t A7 = PIN_A7; +#define ADC_RESOLUTION 14 + +// Other pins +#define PIN_AREF (2) +#define PIN_NFC1 (9) +#define PIN_NFC2 (10) + +static const uint8_t AREF = PIN_AREF; + +/* + * Serial interfaces + */ +#define PIN_SERIAL1_RX (15) +#define PIN_SERIAL1_TX (16) + +// Connected to Jlink CDC +#define PIN_SERIAL2_RX (8) +#define PIN_SERIAL2_TX (6) + +/* + * SPI Interfaces + */ +#define SPI_INTERFACES_COUNT 2 + +#define PIN_SPI_MISO (45) +#define PIN_SPI_MOSI (44) +#define PIN_SPI_SCK (43) + +#define PIN_SPI1_MISO (29) // (0 + 29) +#define PIN_SPI1_MOSI (30) // (0 + 30) +#define PIN_SPI1_SCK (3) // (0 + 3) + +static const uint8_t SS = 42; +static const uint8_t MOSI = PIN_SPI_MOSI; +static const uint8_t MISO = PIN_SPI_MISO; +static const uint8_t SCK = PIN_SPI_SCK; + +/* + * eink display pins + */ + +#define PIN_EINK_CS (0 + 26) +#define PIN_EINK_BUSY (0 + 4) +#define PIN_EINK_DC (0 + 17) +#define PIN_EINK_RES (-1) +#define PIN_EINK_SCLK (0 + 3) +#define PIN_EINK_MOSI (0 + 30) // also called SDI + +// Controls power for the eink display - Board power is enabled either by VBUS from USB or the CPU asserting PWR_ON +// FIXME - I think this is actually just the board power enable - it enables power to the CPU also +// #define PIN_EINK_PWR_ON (-1) + +// #define USE_EINK + +// RAKRGB +#define HAS_NCP5623 + +/* + * Wire Interfaces + */ +#define WIRE_INTERFACES_COUNT 1 + +#define PIN_WIRE_SDA (13) +#define PIN_WIRE_SCL (14) + +// QSPI Pins +#define PIN_QSPI_SCK 3 +#define PIN_QSPI_CS 26 +#define PIN_QSPI_IO0 30 +#define PIN_QSPI_IO1 29 +#define PIN_QSPI_IO2 28 +#define PIN_QSPI_IO3 2 + +// On-board QSPI Flash +#define EXTERNAL_FLASH_DEVICES IS25LP080D +#define EXTERNAL_FLASH_USE_QSPI + +/* @note RAK5005-O GPIO mapping to RAK4631 GPIO ports + RAK5005-O <-> nRF52840 + IO1 <-> P0.17 (Arduino GPIO number 17) + IO2 <-> P1.02 (Arduino GPIO number 34) + IO3 <-> P0.21 (Arduino GPIO number 21) + IO4 <-> P0.04 (Arduino GPIO number 4) + IO5 <-> P0.09 (Arduino GPIO number 9) + IO6 <-> P0.10 (Arduino GPIO number 10) + IO7 <-> P0.28 (Arduino GPIO number 28) + SW1 <-> P0.01 (Arduino GPIO number 1) + A0 <-> P0.04/AIN2 (Arduino Analog A2 + A1 <-> P0.31/AIN7 (Arduino Analog A7 + SPI_CS <-> P0.26 (Arduino GPIO number 26) + */ + +// No reason not to have the RAK Wireless pin defs here too. This allows code from example RAK sketches to run without +// modification. + +static const uint8_t WB_IO1 = 17; // SLOT_A SLOT_B +static const uint8_t WB_IO2 = 34; // SLOT_A SLOT_B +static const uint8_t WB_IO3 = 21; // SLOT_C +static const uint8_t WB_IO4 = 4; // SLOT_C +static const uint8_t WB_IO5 = 9; // SLOT_D +static const uint8_t WB_IO6 = 10; // SLOT_D +static const uint8_t WB_SW1 = 33; // IO_SLOT +static const uint8_t WB_A0 = 5; // IO_SLOT +static const uint8_t WB_A1 = 31; // IO_SLOT +static const uint8_t WB_I2C1_SDA = 13; // SENSOR_SLOT IO_SLOT +static const uint8_t WB_I2C1_SCL = 14; // SENSOR_SLOT IO_SLOT +static const uint8_t WB_I2C2_SDA = 24; // IO_SLOT +static const uint8_t WB_I2C2_SCL = 25; // IO_SLOT +static const uint8_t WB_SPI_CS = 26; // IO_SLOT +static const uint8_t WB_SPI_CLK = 3; // IO_SLOT +static const uint8_t WB_SPI_MISO = 29; // IO_SLOT +static const uint8_t WB_SPI_MOSI = 30; // IO_SLOT + +// RAK4630 LoRa module + +/* Setup of the SX1262 LoRa module ( https://docs.rakwireless.com/Product-Categories/WisBlock/RAK4631/Datasheet/ ) + +P1.10 NSS SPI NSS (Arduino GPIO number 42) +P1.11 SCK SPI CLK (Arduino GPIO number 43) +P1.12 MOSI SPI MOSI (Arduino GPIO number 44) +P1.13 MISO SPI MISO (Arduino GPIO number 45) +P1.14 BUSY BUSY signal (Arduino GPIO number 46) +P1.15 DIO1 DIO1 event interrupt (Arduino GPIO number 47) +P1.06 NRESET NRESET manual reset of the SX1262 (Arduino GPIO number 38) + +Important for successful SX1262 initialization: + +* Setup DIO2 to control the antenna switch +* Setup DIO3 to control the TCXO power supply +* Setup the SX1262 to use it's DCDC regulator and not the LDO +* RAK4630 schematics show GPIO P1.07 connected to the antenna switch, but it should not be initialized, as DIO2 will do the +control of the antenna switch + +SO GPIO 39/TXEN MAY NOT BE DEFINED FOR SUCCESSFUL OPERATION OF THE SX1262 - TG + +*/ + +#define USE_SX1262 +#define SX126X_CS (42) +#define SX126X_DIO1 (47) +#define SX126X_BUSY (46) +#define SX126X_RESET (38) +// #define SX126X_TXEN (39) +// #define SX126X_RXEN (37) +#define SX126X_POWER_EN (37) +// DIO2 controlls an antenna switch and the TCXO voltage is controlled by DIO3 +#define SX126X_DIO2_AS_RF_SWITCH +#define SX126X_DIO3_TCXO_VOLTAGE 1.8 + +// enables 3.3V periphery like GPS or IO Module +#define PIN_3V3_EN (34) + +// RAK1910 GPS module +// If using the wisblock GPS module and pluged into Port A on WisBlock base +// IO1 is hooked to PPS (pin 12 on header) = gpio 17 +// IO2 is hooked to GPS RESET = gpio 34, but it can not be used to this because IO2 is ALSO used to control 3V3_S power (1 is on). +// Therefore must be 1 to keep peripherals powered +// Power is on the controllable 3V3_S rail +// #define PIN_GPS_RESET (34) +#define PIN_GPS_EN PIN_3V3_EN +#define PIN_GPS_PPS (17) // Pulse per second input from the GPS + +#define GPS_RX_PIN PIN_SERIAL1_RX +#define GPS_TX_PIN PIN_SERIAL1_TX + +// Define pin to enable GPS toggle (set GPIO to LOW) via user button triple press + +// RAK12002 RTC Module +#define RV3028_RTC (uint8_t)0b1010010 + +// RAK18001 Buzzer in Slot C +// #define PIN_BUZZER 21 // IO3 is PWM2 +// NEW: set this via protobuf instead! + +// Battery +// The battery sense is hooked to pin A0 (5) +#define BATTERY_PIN PIN_A0 +// and has 12 bit resolution +#define BATTERY_SENSE_RESOLUTION_BITS 12 +#define BATTERY_SENSE_RESOLUTION 4096.0 +// Definition of milliVolt per LSB => 3.0V ADC range and 12-bit ADC resolution = 3000mV/4096 +#define VBAT_MV_PER_LSB (0.73242188F) +// Voltage divider value => 1.5M + 1M voltage divider on VBAT = (1.5M / (1M + 1.5M)) +#define VBAT_DIVIDER (0.4F) +// Compensation factor for the VBAT divider +#define VBAT_DIVIDER_COMP (1.73) +// Fixed calculation of milliVolt from compensation value +#define REAL_VBAT_MV_PER_LSB (VBAT_DIVIDER_COMP * VBAT_MV_PER_LSB) +#undef AREF_VOLTAGE +#define AREF_VOLTAGE 3.0 +#define VBAT_AR_INTERNAL AR_INTERNAL_3_0 +#define ADC_MULTIPLIER VBAT_DIVIDER_COMP // REAL_VBAT_MV_PER_LSB +#define VBAT_RAW_TO_SCALED(x) (REAL_VBAT_MV_PER_LSB * x) + +#define HAS_RTC 1 + +#define HAS_ETHERNET 1 + +#define RAK_4631 1 + +#define PIN_ETHERNET_RESET 21 +#define PIN_ETHERNET_SS PIN_EINK_CS +#define ETH_SPI_PORT SPI1 +#define AQ_SET_PIN 10 + +#ifdef __cplusplus +} +#endif + +#define RAK14014 // Tell it we have a RAK14014 +#define USER_SETUP_LOADED 1 +#define DISABLE_ALL_LIBRARY_WARNINGS 1 +#define ST7789_DRIVER 1 +#define TFT_WIDTH 240 +#define TFT_HEIGHT 320 +#define TFT_MISO WB_SPI_MISO +#define TFT_MOSI WB_SPI_MOSI +#define TFT_SCLK WB_SPI_CLK +#define TFT_CS WB_SPI_CS +#define TFT_DC WB_IO4 +#define TFT_RST -1 +#define TFT_BL WB_IO3 +#define LOAD_GLCD 1 +#define LOAD_GFXFF 1 +#define TFT_RGB_ORDER 0 +#define SPI_FREQUENCY 50000000 +#define TFT_SPI_PORT SPI1 +#define ST7789_CS WB_SPI_CS // Adds compatibility with the rest of the checking for a ST7789 TFT. + +#define SCREEN_ROTATE +#define SCREEN_TRANSITION_FRAMERATE 5 + +#define HAS_TOUCHSCREEN 0 +#define SCREEN_TOUCH_INT 10 // From tp.h on the tracker open source code. +#define TOUCH_I2C_PORT 0 +#define TOUCH_SLAVE_ADDRESS 0x5D // GT911 + +/*---------------------------------------------------------------------------- + * Arduino objects - C++ only + *----------------------------------------------------------------------------*/ + +#endif