Rename axp192_found to pmu_found to avoid confusion

src/ButtonThread.h

@@ -129,7 +129,7 @@ class ButtonThread : public concurrency::OSThread
         // If user button is held down for 5 seconds, shutdown the device.
         if ((millis() - longPressTime > 5 * 1000) && (longPressTime > 0)) {
 #if defined(HAS_AXP192) || defined(HAS_AXP2101)
-            if (axp192_found == true) {
+            if (pmu_found == true) {
                 setLed(false);
                 power->shutdown();
             }

src/Power.cpp

@@ -564,9 +564,9 @@ bool Power::axpChipInit()
 
             readPowerStatus();
 
-    axp192_found = true;
+    pmu_found = true;
 
-    return axp192_found;
+    return pmu_found;
 
 #else
     return false;

src/detect/i2cScan.h

@@ -117,7 +117,7 @@ void scanI2Cdevice(void)
             }
 #if defined(HAS_AXP192) || defined(HAS_AXP2101)
             if (addr == XPOWERS_AXP192_AXP2101_ADDRESS) {
-                axp192_found = true;
+                pmu_found = true;
                 DEBUG_MSG("axp192/axp2101 PMU found\n");
             }
 #endif

src/main.cpp

@@ -84,7 +84,7 @@ bool eink_found = true;
 
 uint32_t serialSinceMsec;
 
-bool axp192_found;
+bool pmu_found;
 
 // Array map of sensor types (as array index) and i2c address as value we'll find in the i2c scan
 uint8_t nodeTelemetrySensorsMap[7] = { 0, 0, 0, 0, 0, 0, 0 };
@@ -302,7 +302,7 @@ void setup()
 
     // Do this after service.init (because that clears error_code)
 #if defined(HAS_AXP192) || defined(HAS_AXP2101)
-    if (!axp192_found)
+    if (!pmu_found)
         RECORD_CRITICALERROR(CriticalErrorCode_NoAXP192); // Record a hardware fault for missing hardware
 #endif
 

src/main.h

@@ -15,7 +15,7 @@ extern uint8_t faceskb_found;
 extern uint8_t rtc_found;
 
 extern bool eink_found;
-extern bool axp192_found;
+extern bool pmu_found;
 extern bool isCharging;
 extern bool isUSBPowered;
 

src/shutdown.h

@@ -36,7 +36,7 @@ void powerCommandsCheck()
     if (shutdownAtMsec && millis() > shutdownAtMsec) {
         DEBUG_MSG("Shutting down from admin command\n");
 #if defined(HAS_AXP192) || defined(HAS_AXP2101)
-        if (axp192_found == true) {
+        if (pmu_found == true) {
             playShutdownMelody();
             power->shutdown();
         }

src/sleep.cpp

@@ -79,7 +79,7 @@ void setLed(bool ledOn)
 #endif
 
 #if defined(HAS_AXP192) || defined(HAS_AXP2101)
-    if (axp192_found) {
+    if (pmu_found) {
         // blink the axp led
         PMU->setChargingLedMode(ledOn ? XPOWERS_CHG_LED_ON : XPOWERS_CHG_LED_OFF);
     }
@@ -91,7 +91,7 @@ void setGPSPower(bool on)
     DEBUG_MSG("Setting GPS power=%d\n", on);
 
 #if defined(HAS_AXP192) || defined(HAS_AXP2101)
-    if (axp192_found){
+    if (pmu_found){
 #ifdef LILYGO_TBEAM_S3_CORE
         on ? PMU->enablePowerOutput(XPOWERS_ALDO4) : PMU->disablePowerOutput(XPOWERS_ALDO4);
 #else
@@ -191,7 +191,7 @@ void doDeepSleep(uint64_t msecToWake)
 #endif
 
 #if defined(HAS_AXP192) || defined(HAS_AXP2101)
-    if (axp192_found) {
+    if (pmu_found) {
         // Obsolete comment: from back when we we used to receive lora packets while CPU was in deep sleep.
         // We no longer do that, because our light-sleep current draws are low enough and it provides fast start/low cost
         // wake.  We currently use deep sleep only for 'we want our device to actually be off - because our battery is
@@ -264,7 +264,7 @@ esp_sleep_wakeup_cause_t doLightSleep(uint64_t sleepMsec) // FIXME, use a more r
 #endif
 #ifdef PMU_IRQ
     // wake due to PMU can happen repeatedly if there is no battery installed or the battery fills
-    if (axp192_found)
+    if (pmu_found)
         gpio_wakeup_enable((gpio_num_t)PMU_IRQ, GPIO_INTR_LOW_LEVEL); // pmu irq
 #endif
     assert(esp_sleep_enable_gpio_wakeup() == ESP_OK);