Adds rfswitch on Portduino (#7663)

* Initial attempt to get rfswitch working on Portduino

* Make portduino_config global

src/mesh/LR11x0Interface.cpp

@@ -6,6 +6,10 @@
 #include "mesh/NodeDB.h"
 #ifdef LR11X0_DIO_AS_RF_SWITCH
 #include "rfswitch.h"
+#elif ARCH_PORTDUINO
+#include "PortduinoGlue.h"
+#define rfswitch_dio_pins portduino_config.rfswitch_dio_pins
+#define rfswitch_table portduino_config.rfswitch_table
 #else
 static const uint32_t rfswitch_dio_pins[] = {RADIOLIB_NC, RADIOLIB_NC, RADIOLIB_NC, RADIOLIB_NC, RADIOLIB_NC};
 static const Module::RfSwitchMode_t rfswitch_table[] = {
@@ -14,10 +18,6 @@ static const Module::RfSwitchMode_t rfswitch_table[] = {
 };
 #endif
 
-#ifdef ARCH_PORTDUINO
-#include "PortduinoGlue.h"
-#endif
-
 // Particular boards might define a different max power based on what their hardware can do, default to max power output if not
 // specified (may be dangerous if using external PA and LR11x0 power config forgotten)
 #if ARCH_PORTDUINO
@@ -117,17 +117,14 @@ template <typename T> bool LR11x0Interface<T>::init()
 #ifdef LR11X0_DIO_AS_RF_SWITCH
     bool dioAsRfSwitch = true;
 #elif defined(ARCH_PORTDUINO)
-    bool dioAsRfSwitch = false;
+    bool dioAsRfSwitch = portduino_config.has_rfswitch_table;
-    if (settingsMap[dio2_as_rf_switch]) {
-        dioAsRfSwitch = true;
-    }
 #else
     bool dioAsRfSwitch = false;
 #endif
 
     if (dioAsRfSwitch) {
         lora.setRfSwitchTable(rfswitch_dio_pins, rfswitch_table);
-        LOG_DEBUG("Set DIO RF switch", res);
+        LOG_DEBUG("Set DIO RF switch");
     }
 
     if (res == RADIOLIB_ERR_NONE) {

src/platform/portduino/PortduinoGlue.cpp

@@ -29,6 +29,7 @@
 
 std::map<configNames, int> settingsMap;
 std::map<configNames, std::string> settingsStrings;
+portduino_config_struct portduino_config;
 std::ofstream traceFile;
 Ch341Hal *ch341Hal = nullptr;
 char *configPath = nullptr;
@@ -553,6 +554,48 @@ bool loadConfig(const char *configPath)
                     }
                 }
             }
+            if (yamlConfig["Lora"]["rfswitch_table"]) {
+                portduino_config.has_rfswitch_table = true;
+                portduino_config.rfswitch_table[0].mode = LR11x0::MODE_STBY;
+                portduino_config.rfswitch_table[1].mode = LR11x0::MODE_RX;
+                portduino_config.rfswitch_table[2].mode = LR11x0::MODE_TX;
+                portduino_config.rfswitch_table[3].mode = LR11x0::MODE_TX_HP;
+                portduino_config.rfswitch_table[4].mode = LR11x0::MODE_TX_HF;
+                portduino_config.rfswitch_table[5].mode = LR11x0::MODE_GNSS;
+                portduino_config.rfswitch_table[6].mode = LR11x0::MODE_WIFI;
+                portduino_config.rfswitch_table[7] = END_OF_MODE_TABLE;
+
+                for (int i = 0; i < 5; i++) {
+
+                    // set up the pin array first
+                    if (yamlConfig["Lora"]["rfswitch_table"]["pins"][i].as<std::string>("") == "DIO5")
+                        portduino_config.rfswitch_dio_pins[i] = RADIOLIB_LR11X0_DIO5;
+                    if (yamlConfig["Lora"]["rfswitch_table"]["pins"][i].as<std::string>("") == "DIO6")
+                        portduino_config.rfswitch_dio_pins[i] = RADIOLIB_LR11X0_DIO6;
+                    if (yamlConfig["Lora"]["rfswitch_table"]["pins"][i].as<std::string>("") == "DIO7")
+                        portduino_config.rfswitch_dio_pins[i] = RADIOLIB_LR11X0_DIO7;
+                    if (yamlConfig["Lora"]["rfswitch_table"]["pins"][i].as<std::string>("") == "DIO8")
+                        portduino_config.rfswitch_dio_pins[i] = RADIOLIB_LR11X0_DIO8;
+                    if (yamlConfig["Lora"]["rfswitch_table"]["pins"][i].as<std::string>("") == "DIO10")
+                        portduino_config.rfswitch_dio_pins[i] = RADIOLIB_LR11X0_DIO10;
+
+                    // now fill in the table
+                    if (yamlConfig["Lora"]["rfswitch_table"]["MODE_STBY"][i].as<std::string>("") == "HIGH")
+                        portduino_config.rfswitch_table[0].values[i] = HIGH;
+                    if (yamlConfig["Lora"]["rfswitch_table"]["MODE_RX"][i].as<std::string>("") == "HIGH")
+                        portduino_config.rfswitch_table[1].values[i] = HIGH;
+                    if (yamlConfig["Lora"]["rfswitch_table"]["MODE_TX"][i].as<std::string>("") == "HIGH")
+                        portduino_config.rfswitch_table[2].values[i] = HIGH;
+                    if (yamlConfig["Lora"]["rfswitch_table"]["MODE_TX_HP"][i].as<std::string>("") == "HIGH")
+                        portduino_config.rfswitch_table[3].values[i] = HIGH;
+                    if (yamlConfig["Lora"]["rfswitch_table"]["MODE_TX_HF"][i].as<std::string>("") == "HIGH")
+                        portduino_config.rfswitch_table[4].values[i] = HIGH;
+                    if (yamlConfig["Lora"]["rfswitch_table"]["MODE_GNSS"][i].as<std::string>("") == "HIGH")
+                        portduino_config.rfswitch_table[5].values[i] = HIGH;
+                    if (yamlConfig["Lora"]["rfswitch_table"]["MODE_WIFI"][i].as<std::string>("") == "HIGH")
+                        portduino_config.rfswitch_table[6].values[i] = HIGH;
+                }
+            }
         }
         if (yamlConfig["GPIO"]) {
             settingsMap[userButtonPin] = yamlConfig["GPIO"]["User"].as<int>(RADIOLIB_NC);

src/platform/portduino/PortduinoGlue.h

@@ -3,6 +3,8 @@
 #include <map>
 #include <unordered_map>
 
+#include "LR11x0Interface.h"
+#include "Module.h"
 #include "platform/portduino/USBHal.h"
 
 // Product strings for auto-configuration
@@ -126,4 +128,10 @@ bool loadConfig(const char *configPath);
 static bool ends_with(std::string_view str, std::string_view suffix);
 void getMacAddr(uint8_t *dmac);
 bool MAC_from_string(std::string mac_str, uint8_t *dmac);
-std::string exec(const char *cmd);
+std::string exec(const char *cmd);
+
+extern struct portduino_config_struct {
+    bool has_rfswitch_table = false;
+    uint32_t rfswitch_dio_pins[5] = {RADIOLIB_NC, RADIOLIB_NC, RADIOLIB_NC, RADIOLIB_NC, RADIOLIB_NC};
+    Module::RfSwitchMode_t rfswitch_table[8];
+} portduino_config;