diff --git a/src/gps/GPS.cpp b/src/gps/GPS.cpp
index 295b5162f..60d9e8b24 100644
--- a/src/gps/GPS.cpp
+++ b/src/gps/GPS.cpp
@@ -640,7 +640,7 @@ bool GPS::setup()
                 SEND_UBX_PACKET(0x06, 0x86, _message_PMS, "enable powersaving for GPS", 500);
                 SEND_UBX_PACKET(0x06, 0x3B, _message_CFG_PM2, "enable powersaving details for GPS", 500);
 
-                // For M8 we want to enable NMEA version 4.10 so we can see the additional sats.
+                // For M8 we want to enable NMEA vserion 4.10 so we can see the additional sats.
                 if (gnssModel == GNSS_MODEL_UBLOX8) {
                     clearBuffer();
                     SEND_UBX_PACKET(0x06, 0x17, _message_NMEA, "enable NMEA 4.10", 500);
diff --git a/src/gps/GPSUpdateScheduling.cpp b/src/gps/GPSUpdateScheduling.cpp
index 09c92788e..abcf6b196 100644
--- a/src/gps/GPSUpdateScheduling.cpp
+++ b/src/gps/GPSUpdateScheduling.cpp
@@ -49,7 +49,7 @@ uint32_t GPSUpdateScheduling::msUntilNextSearch()
 }
 
 // How long have we already been searching?
-// Used to abort a search in progress, if it runs unacceptably long
+// Used to abort a search in progress, if it runs unnaceptably long
 uint32_t GPSUpdateScheduling::elapsedSearchMs()
 {
     // If searching
@@ -98,7 +98,7 @@ void GPSUpdateScheduling::updateLockTimePrediction()
 
     // Ignore the first lock-time: likely to be long, will skew data
 
-    // Second locktime: likely stable. Use to initialize the smoothing filter
+    // Second locktime: likely stable. Use to intialize the smoothing filter
     if (searchCount == 1)
         predictedMsToGetLock = lockTime;
 
@@ -106,7 +106,7 @@ void GPSUpdateScheduling::updateLockTimePrediction()
     else if (searchCount > 1)
         predictedMsToGetLock = (lockTime * weighting) + (predictedMsToGetLock * (1 - weighting));
 
-    searchCount++; // Only tracked so we can disregard initial lock-times
+    searchCount++; // Only tracked so we can diregard initial lock-times
 
     LOG_DEBUG("Predicting %us to get next lock", predictedMsToGetLock / 1000);
 }
diff --git a/src/gps/GeoCoord.cpp b/src/gps/GeoCoord.cpp
index 9a6da942e..5abb25a06 100644
--- a/src/gps/GeoCoord.cpp
+++ b/src/gps/GeoCoord.cpp
@@ -12,7 +12,7 @@ GeoCoord::GeoCoord(int32_t lat, int32_t lon, int32_t alt) : _latitude(lat), _lon
 
 GeoCoord::GeoCoord(float lat, float lon, int32_t alt) : _altitude(alt)
 {
-    // Change decimal representation to int32_t. I.e., 12.345 becomes 123450000
+    // Change decimial representation to int32_t. I.e., 12.345 becomes 123450000
     _latitude = int32_t(lat * 1e+7);
     _longitude = int32_t(lon * 1e+7);
     GeoCoord::setCoords();
@@ -20,7 +20,7 @@ GeoCoord::GeoCoord(float lat, float lon, int32_t alt) : _altitude(alt)
 
 GeoCoord::GeoCoord(double lat, double lon, int32_t alt) : _altitude(alt)
 {
-    // Change decimal representation to int32_t. I.e., 12.345 becomes 123450000
+    // Change decimial representation to int32_t. I.e., 12.345 becomes 123450000
     _latitude = int32_t(lat * 1e+7);
     _longitude = int32_t(lon * 1e+7);
     GeoCoord::setCoords();
@@ -467,7 +467,7 @@ int32_t GeoCoord::bearingTo(const GeoCoord &pointB)
 }
 
 /**
- * Create a new point based on the passed in point
+ * Create a new point bassed on the passed in poin
  * Ported from http://www.edwilliams.org/avform147.htm#LL
  * @param bearing
  * The bearing in raidans
diff --git a/src/gps/ubx.h b/src/gps/ubx.h
index 78366dc83..551921384 100644
--- a/src/gps/ubx.h
+++ b/src/gps/ubx.h
@@ -155,7 +155,7 @@ const uint8_t GPS::_message_NAVX5[] = {
     0x00, 0x00, 0x00, 0x00, // Reserved 9
     0x00,                   // Reserved 10
     0x00,                   // Reserved 11
-    0x00,                   // usePPP (Precise Point Positioning) (0 = false, 1 = true)
+    0x00,                   // usePPP (Precice Point Positioning) (0 = false, 1 = true)
     0x01,                   // useAOP  (AssistNow Autonomous configuration) = 1 (enabled)
     0x00,                   // Reserved 12
     0x00,                   // Reserved 13
@@ -183,7 +183,7 @@ const uint8_t GPS::_message_NAVX5_8[] = {
     0x00,                   // Reserved 4
     0x00, 0x00,             // Reserved 5
     0x00, 0x00,             // Reserved 6
-    0x00,                   // usePPP (Precise Point Positioning) (0 = false, 1 = true)
+    0x00,                   // usePPP (Precice Point Positioning) (0 = false, 1 = true)
     0x01,                   // aopCfg  (AssistNow Autonomous configuration) = 1 (enabled)
     0x00, 0x00,             // Reserved 7
     0x00, 0x00,             // aopOrbMaxErr = 0 to reset to firmware default
@@ -222,7 +222,7 @@ const uint8_t GPS::_message_GSA[] = {
     0x00,       // Rate for DDC
     0x00,       // Rate for UART1
     0x00,       // Rate for UART2
-    0x00,       // Rate for USB useful for native linux
+    0x00,       // Rate for USB usefull for native linux
     0x00,       // Rate for SPI
     0x00        // Reserved
 };
@@ -256,7 +256,7 @@ const uint8_t GPS::_message_RMC[] = {
     0x00,       // Rate for DDC
     0x01,       // Rate for UART1
     0x00,       // Rate for UART2
-    0x01,       // Rate for USB useful for native linux
+    0x01,       // Rate for USB usefull for native linux
     0x00,       // Rate for SPI
     0x00        // Reserved
 };
@@ -267,7 +267,7 @@ const uint8_t GPS::_message_GGA[] = {
     0x00,       // Rate for DDC
     0x01,       // Rate for UART1
     0x00,       // Rate for UART2
-    0x01,       // Rate for USB, useful for native linux
+    0x01,       // Rate for USB, usefull for native linux
     0x00,       // Rate for SPI
     0x00        // Reserved
 };
@@ -312,7 +312,7 @@ const uint8_t GPS::_message_DISABLE_TXT_INFO[] = {
 // This command applies to M8 products
 const uint8_t GPS::_message_PMS[] = {
     0x00,       // Version (0)
-    0x03,       // Power setup value 3 = Aggressive 1Hz
+    0x03,       // Power setup value 3 = Agresssive 1Hz
     0x00, 0x00, // period: not applicable, set to 0
     0x00, 0x00, // onTime: not applicable, set to 0
     0x00, 0x00  // reserved, generated by u-center
@@ -335,7 +335,7 @@ const uint8_t GPS::_message_SAVE_10[] = {
 // As the M10 has no flash, the best we can do to preserve the config is to set it in RAM and BBR.
 // BBR will survive a restart, and power off for a while, but modules with small backup
 // batteries or super caps will not retain the config for a long power off time.
-// for all configurations using sleep / low power modes, V_BCKP needs to be hooked to permanent power for fast acquisition after
+// for all configurations using sleep / low power modes, V_BCKP needs to be hooked to permanent power for fast aquisition after
 // sleep
 
 // VALSET Commands for M10
diff --git a/src/graphics/EInkDynamicDisplay.cpp b/src/graphics/EInkDynamicDisplay.cpp
index cfa5b354f..ac5755bc1 100644
--- a/src/graphics/EInkDynamicDisplay.cpp
+++ b/src/graphics/EInkDynamicDisplay.cpp
@@ -95,7 +95,7 @@ void EInkDynamicDisplay::adjustRefreshCounters()
 // Trigger the display update by calling base class
 bool EInkDynamicDisplay::update()
 {
-    // Determine the refresh mode to use, and start the update
+    // Detemine the refresh mode to use, and start the update
     bool refreshApproved = determineMode();
     if (refreshApproved) {
         EInkDisplay::forceDisplay(0); // Bypass base class' own rate-limiting system
@@ -317,7 +317,7 @@ void EInkDynamicDisplay::checkFrameMatchesPrevious()
     LOG_DEBUG("refresh=SKIPPED, reason=FRAME_MATCHED_PREVIOUS, frameFlags=0x%x", frameFlags);
 }
 
-// Have too many fast-refreshes occurred consecutively, since last full refresh?
+// Have too many fast-refreshes occured consecutively, since last full refresh?
 void EInkDynamicDisplay::checkConsecutiveFastRefreshes()
 {
     // If a decision was already reached, don't run the check
@@ -450,7 +450,7 @@ void EInkDynamicDisplay::resetGhostPixelTracking()
 }
 #endif // EINK_LIMIT_GHOSTING_PX
 
-// Handle any async tasks
+// Handle any asyc tasks
 void EInkDynamicDisplay::onNotify(uint32_t notification)
 {
     // Which task
diff --git a/src/graphics/Screen.h b/src/graphics/Screen.h
index fc4727d54..b2e6e905b 100644
--- a/src/graphics/Screen.h
+++ b/src/graphics/Screen.h
@@ -424,7 +424,7 @@ class Screen : public concurrency::OSThread
 
 #endif
 
-        // If we already returned an unconvertible-character symbol for this unconvertible-character sequence, return NULs for the
+        // If we already returned an unconvertable-character symbol for this unconvertable-character sequence, return NULs for the
         // rest of it
         if (SKIPREST)
             return (uint8_t)0;
diff --git a/src/graphics/TFTDisplay.cpp b/src/graphics/TFTDisplay.cpp
index 36341f20a..3ba847c23 100644
--- a/src/graphics/TFTDisplay.cpp
+++ b/src/graphics/TFTDisplay.cpp
@@ -687,7 +687,7 @@ void TFTDisplay::display(bool fromBlank)
         for (x = 0; x < displayWidth; x++) {
             auto isset = buffer[x + (y / 8) * displayWidth] & (1 << (y & 7));
             if (!fromBlank) {
-                // get src pixel in the page based ordering the OLED lib uses FIXME, super inefficient
+                // get src pixel in the page based ordering the OLED lib uses FIXME, super inefficent
                 auto dblbuf_isset = buffer_back[x + (y / 8) * displayWidth] & (1 << (y & 7));
                 if (isset != dblbuf_isset) {
                     tft->drawPixel(x, y, isset ? TFT_MESH : TFT_BLACK);
diff --git a/src/input/ExpressLRSFiveWay.h b/src/input/ExpressLRSFiveWay.h
index 6198c57fb..c53aa9c09 100644
--- a/src/input/ExpressLRSFiveWay.h
+++ b/src/input/ExpressLRSFiveWay.h
@@ -38,7 +38,7 @@ class ExpressLRSFiveWay : public Observable<const InputEvent *>, public concurre
     static constexpr uint32_t KEY_LONG_PRESS_MS = 3000; // How many milliseconds to hold key for a long press
 
     // This merged an enum used by the ExpressLRS code, with meshtastic canned message values
-    // Key names are kept simple, to allow user customization
+    // Key names are kept simple, to allow user customizaton
     typedef enum {
         UP = meshtastic_ModuleConfig_CannedMessageConfig_InputEventChar_UP,
         DOWN = meshtastic_ModuleConfig_CannedMessageConfig_InputEventChar_DOWN,
diff --git a/src/input/MPR121Keyboard.cpp b/src/input/MPR121Keyboard.cpp
index 197add3ee..e1b32aa54 100644
--- a/src/input/MPR121Keyboard.cpp
+++ b/src/input/MPR121Keyboard.cpp
@@ -168,13 +168,13 @@ void MPR121Keyboard::reset()
     // Set Debounce to 0x02
     writeRegister(_MPR121_REG_DEBOUNCE, 0x00);
     delay(20);
-    // Set Filter1 iterations and discharge current 6x and 16uA respectively (0x10)
+    // Set Filter1 itterations and discharge current 6x and 16uA respectively (0x10)
     writeRegister(_MPR121_REG_CONFIG1, 0x10);
     delay(20);
-    // Set CDT to 0.5us, Filter2 iterations to 4x, and Sample interval = 0 (0x20)
+    // Set CDT to 0.5us, Filter2 itterations to 4x, and Sample interval = 0 (0x20)
     writeRegister(_MPR121_REG_CONFIG2, 0x20);
     delay(20);
-    // Enter run mode by Setting partial filter calibration tracking, disable proximity detection, enable 12 channels
+    // Enter run mode by Seting partial filter calibration tracking, disable proximity detection, enable 12 channels
     writeRegister(_MPR121_REG_ELECTRODE_CONFIG,
                   ECR_CALIBRATION_TRACK_FROM_PARTIAL_FILTER | ECR_PROXIMITY_DETECTION_OFF | ECR_TOUCH_DETECTION_12CH);
     delay(100);
diff --git a/src/input/ScanAndSelect.h b/src/input/ScanAndSelect.h
index bdc0e1a0d..0b3e2716e 100644
--- a/src/input/ScanAndSelect.h
+++ b/src/input/ScanAndSelect.h
@@ -39,7 +39,7 @@ class ScanAndSelectInput : public Observable<const InputEvent *>, public concurr
     bool held = false;           // Have we handled a change in button state?
     bool longPressFired = false; // Long press fires while button still held. This bool ensures the release is no-op
     uint32_t downSinceMs = 0;    // Debouncing for short press, timing for long press
-    uint8_t pin = -1;            // Read from canned message config during init
+    uint8_t pin = -1;            // Read from cannned message config during init
 
     bool alertingNoMessage = false; // Is the "no canned messages" alert shown on screen?
     uint32_t alertingSinceMs = 0;   // Used to dismiss the "no canned message" alert several seconds
diff --git a/src/input/TouchScreenBase.cpp b/src/input/TouchScreenBase.cpp
index ab417e48d..03618b338 100644
--- a/src/input/TouchScreenBase.cpp
+++ b/src/input/TouchScreenBase.cpp
@@ -102,7 +102,7 @@ int32_t TouchScreenBase::runOnce()
     }
     _touchedOld = touched;
 
-    // fire TAP event when no 2nd tap occurred within time
+    // fire TAP event when no 2nd tap occured within time
     if (_tapped && (time_t(millis()) - _start) > TIME_LONG_PRESS - 50) {
         _tapped = false;
         e.touchEvent = static_cast<char>(TOUCH_ACTION_TAP);
diff --git a/src/input/kbI2cBase.cpp b/src/input/kbI2cBase.cpp
index 105ca7600..d0f36c386 100644
--- a/src/input/kbI2cBase.cpp
+++ b/src/input/kbI2cBase.cpp
@@ -353,7 +353,7 @@ int32_t KbI2cBase::runOnce()
                 e.kbchar = INPUT_BROKER_MSG_RIGHT;
                 break;
             case 0xc: // Modifier key: 0xc is alt+c (Other options could be: 0xea = shift+mic button or 0x4 shift+$(speaker))
-                // toggle modifiers button.
+                // toggle moddifiers button.
                 is_sym = !is_sym;
                 e.inputEvent = ANYKEY;
                 e.kbchar = is_sym ? INPUT_BROKER_MSG_FN_SYMBOL_ON   // send 0xf1 to tell CannedMessages to display that the
diff --git a/src/main.cpp b/src/main.cpp
index 745235394..0ce6b3bae 100644
--- a/src/main.cpp
+++ b/src/main.cpp
@@ -220,7 +220,7 @@ static OSThread *ambientLightingThread;
 RadioInterface *rIf = NULL;
 
 /**
- * Some platforms (nrf52) might provide an alternate version that suppresses calling delay from sleep.
+ * Some platforms (nrf52) might provide an alterate version that suppresses calling delay from sleep.
  */
 __attribute__((weak, noinline)) bool loopCanSleep()
 {
@@ -365,7 +365,7 @@ void setup()
     digitalWrite(HICHG, LOW); // 100 mA charging current if set to LOW and 50mA (actually about 20mA) if set to HIGH
 
     pinMode(BAT_READ, OUTPUT);
-    digitalWrite(BAT_READ, LOW); // This is pin P0_14 = 14 and by pulling low to GND it provides path to read on pin 32 (P0,31)
+    digitalWrite(BAT_READ, LOW); // This is pin P0_14 = 14 and by pullling low to GND it provices path to read on pin 32 (P0,31)
                                  // PIN_VBAT the voltage from divider on XIAO board
 
 #endif
diff --git a/src/mesh/Channels.cpp b/src/mesh/Channels.cpp
index a314a5498..b9fe95678 100644
--- a/src/mesh/Channels.cpp
+++ b/src/mesh/Channels.cpp
@@ -398,7 +398,7 @@ bool Channels::decryptForHash(ChannelIndex chIndex, ChannelHash channelHash)
  *
  * This method is called before encoding outbound packets
  *
- * @return the (0 to 255) hash for that channel - if no suitable channel could be found, return -1
+ * @eturn the (0 to 255) hash for that channel - if no suitable channel could be found, return -1
  */
 int16_t Channels::setActiveByIndex(ChannelIndex channelIndex)
 {
diff --git a/src/mesh/Default.h b/src/mesh/Default.h
index 6177aa2f6..2406dafc5 100644
--- a/src/mesh/Default.h
+++ b/src/mesh/Default.h
@@ -44,7 +44,7 @@ class Default
         if (numOnlineNodes <= 40) {
             return 1.0; // No scaling for 40 or fewer nodes
         } else {
-            // Scaling based on number of nodes over 40
+            // Sscaling based on number of nodes over 40
             int nodesOverForty = (numOnlineNodes - 40);
             return 1.0 + (nodesOverForty * 0.075); // Each number of online node scales by 0.075
         }
diff --git a/src/mesh/compression/unishox2.cpp b/src/mesh/compression/unishox2.cpp
index 1c0310605..9fc012a76 100644
--- a/src/mesh/compression/unishox2.cpp
+++ b/src/mesh/compression/unishox2.cpp
@@ -15,7 +15,7 @@
  *
  * @author Arundale Ramanathan
  *
- * Port for Particle (particle.io) / Arduino - Jonathan Greenblatt
+ * Port for Particle (particle.io) / Aruino - Jonathan Greenblatt
  */
 /**
  * @file unishox2.c
@@ -197,7 +197,7 @@ int append_switch_code(char *out, int olen, int ol, uint8_t state)
     return ol;
 }
 
-/// Appends given horizontal and vertical code bits to out
+/// Appends given horizontal and veritical code bits to out
 int append_code(char *out, int olen, int ol, uint8_t code, uint8_t *state, const uint8_t usx_hcodes[],
                 const uint8_t usx_hcode_lens[])
 {
@@ -897,7 +897,7 @@ int read8bitCode(const char *in, int len, int bit_no)
     return code;
 }
 
-/// The list of vertical codes is split into 5 sections. Used by readVCodeIdx()
+/// The list of veritical codes is split into 5 sections. Used by readVCodeIdx()
 #define SECTION_COUNT 5
 /// Used by readVCodeIdx() for finding the section under which the code read using read8bitCode() falls
 uint8_t usx_vsections[] = {0x7F, 0xBF, 0xDF, 0xEF, 0xFF};
@@ -924,7 +924,7 @@ uint8_t usx_vcode_lookup[36] = {(1 << 5) + 0,  (1 << 5) + 0,  (2 << 5) + 1,  (2
 /// compared to using a 256 uint8_t buffer to decode the next 8 bits read by read8bitCode() \n
 /// by splitting the list of vertical codes. \n
 /// Decoder is designed for using less memory, not speed. \n
-/// Returns the vertical code index or 99 if match could not be found. \n
+/// Returns the veritical code index or 99 if match could not be found. \n
 /// Also updates bit_no_p with how many ever bits used by the vertical code.
 int readVCodeIdx(const char *in, int len, int *bit_no_p)
 {
diff --git a/src/mesh/compression/unishox2.h b/src/mesh/compression/unishox2.h
index 8ae475f9d..5e2cc8b4c 100644
--- a/src/mesh/compression/unishox2.h
+++ b/src/mesh/compression/unishox2.h
@@ -15,7 +15,7 @@
  *
  * @author Arundale Ramanathan
  *
- * Port for Particle (particle.io) / Arduino - Jonathan Greenblatt
+ * Port for Particle (particle.io) / Aruino - Jonathan Greenblatt
  *
  * This file describes each function of the Unishox2 API \n
  * For finding out how this API can be used in your program, \n
@@ -291,8 +291,8 @@ extern int unishox2_decompress_simple(const char *in, int len, char *out);
  * @param[in] olen           length of 'out' buffer in bytes. Can be omitted if sufficient buffer is provided
  * @param[in] usx_hcodes     Horizontal codes (array of bytes). See macro section for samples.
  * @param[in] usx_hcode_lens Length of each element in usx_hcodes array
- * @param[in] usx_freq_seq   Frequently occurring sequences. See USX_FREQ_SEQ_* macros for samples
- * @param[in] usx_templates  Templates of frequently occurring patterns. See USX_TEMPLATES macro.
+ * @param[in] usx_freq_seq   Frequently occuring sequences. See USX_FREQ_SEQ_* macros for samples
+ * @param[in] usx_templates  Templates of frequently occuring patterns. See USX_TEMPLATES macro.
  */
 extern int unishox2_compress(const char *in, int len, UNISHOX_API_OUT_AND_LEN(char *out, int olen),
                              const unsigned char usx_hcodes[], const unsigned char usx_hcode_lens[], const char *usx_freq_seq[],
@@ -310,8 +310,8 @@ extern int unishox2_compress(const char *in, int len, UNISHOX_API_OUT_AND_LEN(ch
  * @param[in] olen           length of 'out' buffer in bytes. Can be omitted if sufficient buffer is provided
  * @param[in] usx_hcodes     Horizontal codes (array of bytes). See macro section for samples.
  * @param[in] usx_hcode_lens Length of each element in usx_hcodes array
- * @param[in] usx_freq_seq   Frequently occurring sequences. See USX_FREQ_SEQ_* macros for samples
- * @param[in] usx_templates  Templates of frequently occurring patterns. See USX_TEMPLATES macro.
+ * @param[in] usx_freq_seq   Frequently occuring sequences. See USX_FREQ_SEQ_* macros for samples
+ * @param[in] usx_templates  Templates of frequently occuring patterns. See USX_TEMPLATES macro.
  */
 extern int unishox2_decompress(const char *in, int len, UNISHOX_API_OUT_AND_LEN(char *out, int olen),
                                const unsigned char usx_hcodes[], const unsigned char usx_hcode_lens[], const char *usx_freq_seq[],
diff --git a/src/mesh/generated/meshtastic/admin.pb.h b/src/mesh/generated/meshtastic/admin.pb.h
index 0328300e6..d802eb3da 100644
--- a/src/mesh/generated/meshtastic/admin.pb.h
+++ b/src/mesh/generated/meshtastic/admin.pb.h
@@ -71,7 +71,7 @@ typedef enum _meshtastic_AdminMessage_ModuleConfigType {
 } meshtastic_AdminMessage_ModuleConfigType;
 
 /* Struct definitions */
-/* Parameters for setting up Meshtastic for amateur radio usage */
+/* Parameters for setting up Meshtastic for ameteur radio usage */
 typedef struct _meshtastic_HamParameters {
     /* Amateur radio call sign, eg. KD2ABC */
     char call_sign[8];
diff --git a/src/mesh/generated/meshtastic/atak.pb.h b/src/mesh/generated/meshtastic/atak.pb.h
index cad7fbc7d..15a86788b 100644
--- a/src/mesh/generated/meshtastic/atak.pb.h
+++ b/src/mesh/generated/meshtastic/atak.pb.h
@@ -11,7 +11,7 @@
 
 /* Enum definitions */
 typedef enum _meshtastic_Team {
-    /* Unspecified */
+    /* Unspecifed */
     meshtastic_Team_Unspecifed_Color = 0,
     /* White */
     meshtastic_Team_White = 1,
@@ -45,7 +45,7 @@ typedef enum _meshtastic_Team {
 
 /* Role of the group member */
 typedef enum _meshtastic_MemberRole {
-    /* Unspecified */
+    /* Unspecifed */
     meshtastic_MemberRole_Unspecifed = 0,
     /* Team Member */
     meshtastic_MemberRole_TeamMember = 1,
diff --git a/src/mesh/generated/meshtastic/channel.pb.h b/src/mesh/generated/meshtastic/channel.pb.h
index 2cfad9e22..3d617ae39 100644
--- a/src/mesh/generated/meshtastic/channel.pb.h
+++ b/src/mesh/generated/meshtastic/channel.pb.h
@@ -90,7 +90,7 @@ typedef struct _meshtastic_ChannelSettings {
  a table of well known IDs.
  (see Well Known Channels FIXME) */
     uint32_t id;
-    /* If true, messages on the mesh will be sent to the *public* internet by any gateway node */
+    /* If true, messages on the mesh will be sent to the *public* internet by any gateway ndoe */
     bool uplink_enabled;
     /* If true, messages seen on the internet will be forwarded to the local mesh. */
     bool downlink_enabled;
diff --git a/src/mesh/generated/meshtastic/config.pb.h b/src/mesh/generated/meshtastic/config.pb.h
index 495f9fffe..fab23ae34 100644
--- a/src/mesh/generated/meshtastic/config.pb.h
+++ b/src/mesh/generated/meshtastic/config.pb.h
@@ -293,7 +293,7 @@ typedef enum _meshtastic_Config_BluetoothConfig_PairingMode {
 typedef struct _meshtastic_Config_DeviceConfig {
     /* Sets the role of node */
     meshtastic_Config_DeviceConfig_Role role;
-    /* Disabling this will disable the SerialConsole by not initializing the StreamAPI
+    /* Disabling this will disable the SerialConsole by not initilizing the StreamAPI
  Moved to SecurityConfig */
     bool serial_enabled;
     /* For boards without a hard wired button, this is the pin number that will be used
@@ -326,7 +326,7 @@ typedef struct _meshtastic_Config_PositionConfig {
     /* We should send our position this often (but only if it has changed significantly)
  Defaults to 15 minutes */
     uint32_t position_broadcast_secs;
-    /* Adaptive position broadcast, which is now the default. */
+    /* Adaptive position braoadcast, which is now the default. */
     bool position_broadcast_smart_enabled;
     /* If set, this node is at a fixed position.
  We will generate GPS position updates at the regular interval, but use whatever the last lat/lon/alt we have for the node.
@@ -412,7 +412,7 @@ typedef struct _meshtastic_Config_NetworkConfig {
     char wifi_ssid[33];
     /* If set, will be use to authenticate to the named wifi */
     char wifi_psk[65];
-    /* NTP server to use if WiFi is connected, defaults to `0.pool.ntp.org` */
+    /* NTP server to use if WiFi is conneced, defaults to `0.pool.ntp.org` */
     char ntp_server[33];
     /* Enable Ethernet */
     bool eth_enabled;
@@ -440,7 +440,7 @@ typedef struct _meshtastic_Config_DisplayConfig {
     bool compass_north_top;
     /* Flip screen vertically, for cases that mount the screen upside down */
     bool flip_screen;
-    /* Preferred display units */
+    /* Perferred display units */
     meshtastic_Config_DisplayConfig_DisplayUnits units;
     /* Override auto-detect in screen */
     meshtastic_Config_DisplayConfig_OledType oled;
diff --git a/src/mesh/generated/meshtastic/device_ui.pb.h b/src/mesh/generated/meshtastic/device_ui.pb.h
index 67e46f660..5c1e067ab 100644
--- a/src/mesh/generated/meshtastic/device_ui.pb.h
+++ b/src/mesh/generated/meshtastic/device_ui.pb.h
@@ -72,7 +72,7 @@ typedef struct _meshtastic_NodeFilter {
 } meshtastic_NodeFilter;
 
 typedef struct _meshtastic_NodeHighlight {
-    /* Highlight nodes w/ active chat */
+    /* Hightlight nodes w/ active chat */
     bool chat_switch;
     /* Highlight nodes w/ position */
     bool position_switch;
@@ -106,7 +106,7 @@ typedef struct _meshtastic_DeviceUIConfig {
     /* Node list filter */
     bool has_node_filter;
     meshtastic_NodeFilter node_filter;
-    /* Node list highlighting */
+    /* Node list highlightening */
     bool has_node_highlight;
     meshtastic_NodeHighlight node_highlight;
 } meshtastic_DeviceUIConfig;
diff --git a/src/mesh/generated/meshtastic/portnums.pb.h b/src/mesh/generated/meshtastic/portnums.pb.h
index 442a81b7c..df6cf32c2 100644
--- a/src/mesh/generated/meshtastic/portnums.pb.h
+++ b/src/mesh/generated/meshtastic/portnums.pb.h
@@ -17,7 +17,7 @@
  PortNums should be assigned in the following range:
  0-63   Core Meshtastic use, do not use for third party apps
  64-127 Registered 3rd party apps, send in a pull request that adds a new entry to portnums.proto to  register your application
- 256-511 Use one of these portnums for your private applications that you don't want to register publicly
+ 256-511 Use one of these portnums for your private applications that you don't want to register publically
  All other values are reserved.
  Note: This was formerly a Type enum named 'typ' with the same id #
  We have change to this 'portnum' based scheme for specifying app handlers for particular payloads.
@@ -77,7 +77,7 @@ typedef enum _meshtastic_PortNum {
  ENCODING: ASCII Plaintext */
     meshtastic_PortNum_REPLY_APP = 32,
     /* Used for the python IP tunnel feature
- ENCODING: IP Packet. Handled by the python API, firmware ignores this one and passes on. */
+ ENCODING: IP Packet. Handled by the python API, firmware ignores this one and pases on. */
     meshtastic_PortNum_IP_TUNNEL_APP = 33,
     /* Paxcounter lib included in the firmware
  ENCODING: protobuf */
diff --git a/src/mesh/http/ContentHandler.cpp b/src/mesh/http/ContentHandler.cpp
index a65bd8609..8535a335f 100644
--- a/src/mesh/http/ContentHandler.cpp
+++ b/src/mesh/http/ContentHandler.cpp
@@ -23,7 +23,7 @@
 
 /*
   Including the esp32_https_server library will trigger a compile time error. I've
-  tracked it down to a reoccurrence of this bug:
+  tracked it down to a reoccurrance of this bug:
     https://gcc.gnu.org/bugzilla/show_bug.cgi?id=57824
   The work around is described here:
     https://forums.xilinx.com/t5/Embedded-Development-Tools/Error-with-Standard-Libaries-in-Zynq/td-p/450032
diff --git a/src/mesh/http/WebServer.cpp b/src/mesh/http/WebServer.cpp
index a3934326d..62a8431fa 100644
--- a/src/mesh/http/WebServer.cpp
+++ b/src/mesh/http/WebServer.cpp
@@ -22,7 +22,7 @@ Preferences prefs;
 
 /*
   Including the esp32_https_server library will trigger a compile time error. I've
-  tracked it down to a reoccurrence of this bug:
+  tracked it down to a reoccurrance of this bug:
     https://gcc.gnu.org/bugzilla/show_bug.cgi?id=57824
   The work around is described here:
     https://forums.xilinx.com/t5/Embedded-Development-Tools/Error-with-Standard-Libaries-in-Zynq/td-p/450032
diff --git a/src/mesh/raspihttp/PiWebServer.cpp b/src/mesh/raspihttp/PiWebServer.cpp
index e9e8d1957..711a81024 100644
--- a/src/mesh/raspihttp/PiWebServer.cpp
+++ b/src/mesh/raspihttp/PiWebServer.cpp
@@ -1,12 +1,12 @@
 /*
 Adds a WebServer and WebService callbacks to meshtastic as Linux Version. The WebServer & Webservices
 runs in a real linux thread beside the portdunio threading emulation. It replaces the complete ESP32
-Webserver libs including generation of SSL certificates,  because the use ESP specific details in
+Webserver libs including generation of SSL certifcicates,  because the use ESP specific details in
 the lib that can't be emulated.
 
 The WebServices adapt to the two major phoneapi functions "handleAPIv1FromRadio,handleAPIv1ToRadio"
-The WebServer just adds basic support to deliver WebContent, so it can be used to
-deliver the WebGui defined by the WebClient Project.
+The WebServer just adds basaic support to deliver WebContent, so it can be used to
+deliver the WebGui definded by the WebClient Project.
 
 Steps to get it running:
 1.) Add these Linux Libs to the compile and target machine:
@@ -16,7 +16,7 @@ Steps to get it running:
                      libulfius-dev liborcania-dev
 
 2.) Configure the root directory of the web Content in the config.yaml file.
-    The following tags should be included and set at your needs
+    The followinng tags should be included and set at your needs
 
     Example entry in the config.yaml
     Webserver:
@@ -335,7 +335,7 @@ int generate_self_signed_x509(EVP_PKEY *pkey, X509 **x509)
     // Selfsigned,  Issuer = Subject
     X509_set_issuer_name(*x509, name);
 
-    // Certificate signed with our private key
+    // Certificate signed with our privte key
     if (X509_sign(*x509, pkey, EVP_sha256()) <= 0)
         return -1;
 
@@ -408,7 +408,7 @@ int PiWebServerThread::CreateSSLCertificate()
     }
 
     if (generate_self_signed_x509(pkey, &x509) != 0) {
-        LOG_ERROR("Error generating of X509-Certificate.");
+        LOG_ERROR("Error generating of X509-Certificat.");
         return 2;
     }
 
@@ -428,13 +428,13 @@ int PiWebServerThread::CreateSSLCertificate()
         LOG_ERROR("Error opening certificate.");
         return 4;
     }
-    // write certificate
+    // write cirtificate
     PEM_write_X509(x509_file, x509);
     fclose(x509_file);
 
     EVP_PKEY_free(pkey);
     X509_free(x509);
-    LOG_INFO("Create SSL Certificate -certificate.pem- successful ");
+    LOG_INFO("Create SSL Certifictate -certificate.pem- succesfull ");
     return 0;
 }