diff --git a/src/configuration.h b/src/configuration.h
index 1b386ec17..91181890b 100644
--- a/src/configuration.h
+++ b/src/configuration.h
@@ -117,6 +117,12 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define SX126X_MAX_POWER 22
 #endif
 
+#ifdef HELTEC_V4
+// Power Amps are often non-linear, so we can use an array of values for the power curve
+#define NUM_PA_POINTS 22
+#define TX_GAIN_LORA 11, 11, 11, 11, 11, 11, 11, 11, 11, 11, 11, 11, 11, 11, 11, 11, 10, 10, 9, 9, 8, 7
+#endif
+
 // Default system gain to 0 if not defined
 #ifndef TX_GAIN_LORA
 #define TX_GAIN_LORA 0
diff --git a/src/mesh/RadioInterface.cpp b/src/mesh/RadioInterface.cpp
index 31c68c302..b891ec89c 100644
--- a/src/mesh/RadioInterface.cpp
+++ b/src/mesh/RadioInterface.cpp
@@ -674,11 +674,25 @@ void RadioInterface::limitPower(int8_t loraMaxPower)
         power = maxPower;
     }
 
+#ifndef NUM_PA_POINTS
     if (TX_GAIN_LORA > 0) {
         LOG_INFO("Requested Tx power: %d dBm; Device LoRa Tx gain: %d dB", power, TX_GAIN_LORA);
         power -= TX_GAIN_LORA;
     }
+#else
+    // we have an array of PA gain values.  Find the highest power setting that works.
+    const uint16_t tx_gain[NUM_PA_POINTS] = {TX_GAIN_LORA};
+    for (int radio_dbm = 0; radio_dbm < NUM_PA_POINTS; radio_dbm++) {
+        if (((radio_dbm + tx_gain[radio_dbm]) > power) ||
+            ((radio_dbm == (NUM_PA_POINTS - 1)) && ((radio_dbm + tx_gain[radio_dbm]) <= power))) {
+            // we've exceeded the power limit, or hit the max we can do
+            LOG_INFO("Requested Tx power: %d dBm; Device LoRa Tx gain: %d dB", power, tx_gain[radio_dbm]);
+            power -= tx_gain[radio_dbm];
+            break;
+        }
+    }
 
+#endif
     if (power > loraMaxPower) // Clamp power to maximum defined level
         power = loraMaxPower;
 
diff --git a/src/mesh/SX126xInterface.cpp b/src/mesh/SX126xInterface.cpp
index 3fc2562b3..785338483 100644
--- a/src/mesh/SX126xInterface.cpp
+++ b/src/mesh/SX126xInterface.cpp
@@ -80,6 +80,9 @@ template <typename T> bool SX126xInterface<T>::init()
     RadioLibInterface::init();
 
     limitPower(SX126X_MAX_POWER);
+    // Make sure we reach the minimum power supported to turn the chip on (-9dBm)
+    if (power < -9)
+        power = -9;
 
     int res = lora.begin(getFreq(), bw, sf, cr, syncWord, power, preambleLength, tcxoVoltage, useRegulatorLDO);
     // \todo Display actual typename of the adapter, not just `SX126x`
@@ -118,8 +121,8 @@ template <typename T> bool SX126xInterface<T>::init()
         LOG_DEBUG("Set DIO2 as %sRF switch, result: %d", dio2AsRfSwitch ? "" : "not ", res);
     }
 
-    // If a pin isn't defined, we set it to RADIOLIB_NC, it is safe to always do external RF switching with RADIOLIB_NC as it has
-    // no effect
+// If a pin isn't defined, we set it to RADIOLIB_NC, it is safe to always do external RF switching with RADIOLIB_NC as it has
+// no effect
 #if ARCH_PORTDUINO
     if (res == RADIOLIB_ERR_NONE) {
         LOG_DEBUG("Use MCU pin %i as RXEN and pin %i as TXEN to control RF switching", portduino_config.lora_rxen_pin.pin,
diff --git a/variants/esp32s3/heltec_v4/platformio.ini b/variants/esp32s3/heltec_v4/platformio.ini
index 1a448bc99..d0a250ad3 100644
--- a/variants/esp32s3/heltec_v4/platformio.ini
+++ b/variants/esp32s3/heltec_v4/platformio.ini
@@ -8,4 +8,3 @@ build_flags =
   -D HELTEC_V4
   -I variants/esp32s3/heltec_v4
   -D GPS_POWER_TOGGLE ; comment this line to disable triple press function on the user button to turn off gps entirely.
-  -D SX126X_MAX_POWER=11