pohui_pohui/firmware
1
0
Fork 0
mirror of https://github.com/meshtastic/firmware.git synced 2025-04-23 09:06:02 +00:00
Code Issues Actions 5 Packages Projects Releases Wiki Activity

Hydra variant rectification (#2903)

Browse Source 
* Update variant.h

* Update variant.h

* Update platformio.ini
This commit is contained in:
S5NC 2023-10-25 00:47:36 +01:00 committed by GitHub
parent 227467f638
commit a60b4d08bf
No known key found for this signature in database
GPG Key ID: 4AEE18F83AFDEB23
2 changed files with 24 additions and 32 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

54
variants/diy/hydra/variant.h
View File

@ -2,44 +2,38 @@
#define I2C_SDA 21
#define I2C_SCL 22
// GPS
#undef GPS_RX_PIN
#undef GPS_TX_PIN
#define GPS_RX_PIN 12
// For GPS, 'undef's not needed
#define GPS_TX_PIN 15
#define GPS_UBLOX
#define GPS_RX_PIN 12
#define PIN_GPS_EN 4
#define GPS_POWER_TOGGLE // Moved definition from platformio.ini to here
#define BUTTON_PIN 39 // The middle button GPIO on the T-Beam
#define BATTERY_PIN 35 // A battery voltage measurement pin, voltage divider connected here to measure battery voltage
#define ADC_CHANNEL ADC1_GPIO35_CHANNEL
#define ADC_MULTIPLIER 1.85 // (R1 = 470k, R2 = 680k)
#define EXT_PWR_DETECT 4 // Pin to detect connected external power source for LILYGO® TTGO T-Energy T18 and other DIY boards
#define EXT_NOTIFY_OUT 12 // Overridden default pin to use for Ext Notify Module (#975).
#define LED_PIN 2 // add status LED (compatible with core-pcb and DIY targets)
#define EXT_PWR_DETECT 4 // Pin to detect connected external power source for LILYGO® TTGO T-Energy T18 and other DIY boards
#define EXT_NOTIFY_OUT 12 // Overridden default pin to use for Ext Notify Module (#975).
#define LED_PIN 2 // add status LED (compatible with core-pcb and DIY targets)
#define LORA_DIO0 26 // a No connect on the SX1262/SX1268 module
#define LORA_RESET 23 // RST for SX1276, and for SX1262/SX1268
#define LORA_DIO1 33 // IRQ for SX1262/SX1268
#define LORA_DIO2 32 // BUSY for SX1262/SX1268
#define LORA_DIO3 // Not connected on PCB, but internally on the TTGO SX1262/SX1268, if DIO3 is high the TXCO is enabled
// Radio
#define USE_SX1262 // E22-900M30S uses SX1262
#define SX126X_MAX_POWER 22 // Outputting 22dBm from SX1262 results in ~30dBm E22-900M30S output (module only uses last stage of the YP2233W PA)
#define SX126X_DIO3_TCXO_VOLTAGE 1.8 // E22 series TCXO reference voltage is 1.8V
#define RF95_SCK 5
#define RF95_MISO 19
#define RF95_MOSI 27
#define RF95_NSS 18
#define SX126X_CS 18 // EBYTE module's NSS pin
#define SX126X_SCK 5 // EBYTE module's SCK pin
#define SX126X_MOSI 27 // EBYTE module's MOSI pin
#define SX126X_MISO 19 // EBYTE module's MISO pin
#define SX126X_RESET 23 // EBYTE module's NRST pin
#define SX126X_BUSY 32 // EBYTE module's BUSY pin
#define SX126X_DIO1 33 // EBYTE module's DIO1 pin
#define USE_SX1262
#define SX126X_TXEN 13 // Schematic connects EBYTE module's TXEN pin to MCU
#define SX126X_RXEN 14 // Schematic connects EBYTE module's RXEN pin to MCU
#define SX126X_CS 18 // NSS for SX126X
#define SX126X_DIO1 LORA_DIO1
#define SX126X_BUSY LORA_DIO2
#define SX126X_RESET LORA_RESET
#define SX126X_RXEN 14
#define SX126X_TXEN RADIOLIB_NC
#define SX126X_DIO2_AS_RF_SWITCH
// Set lora.tx_power to 13 for Hydra or other E22 900M30S target due to PA
#define SX126X_MAX_POWER 13
#define SX126X_DIO3_TCXO_VOLTAGE 1.8
#define RF95_NSS SX126X_CS // Compatibility with variant file configuration structure
#define RF95_SCK SX126X_SCK // Compatibility with variant file configuration structure
#define RF95_MOSI SX126X_MOSI // Compatibility with variant file configuration structure
#define RF95_MISO SX126X_MISO // Compatibility with variant file configuration structure
#define LORA_DIO1 SX126X_DIO1 // Compatibility with variant file configuration structure

2
variants/diy/platformio.ini
View File

@ -43,6 +43,4 @@ board_level = extra
build_flags =
${esp32_base.build_flags}
-D DIY_V1
-D EBYTE_E22
-D GPS_POWER_TOGGLE
-I variants/diy/hydra