fix STM32 builds

arch/stm32/stm32.ini

@@ -22,7 +22,22 @@ build_flags =
   -fdata-sections
   
 build_src_filter = 
-  ${arduino_base.build_src_filter} -<platform/esp32/> -<nimble/> -<mesh/api/> -<mesh/wifi/> -<mesh/http/> -<modules/esp32> -<mesh/eth/> -<input> -<buzz> -<modules/RemoteHardwareModule.cpp> -<platform/nrf52> -<platform/portduino> -<platform/rp2xx0> -<mesh/raspihttp>
+  ${arduino_base.build_src_filter}
+  -<platform/esp32/>
+  -<nimble/>
+  -<mesh/api/>
+  -<mesh/wifi/>
+  -<mesh/http/>
+  -<modules/esp32>
+  -<mesh/eth/>
+  -<input>
+  -<buzz>
+  -<modules/RemoteHardwareModule.cpp>
+  -<platform/nrf52>
+  -<platform/portduino>
+  -<platform/rp2xx0>
+  -<mesh/raspihttp>
+  -<.pio/*/*/I2CKeyPad/*>
 
 board_upload.offset_address = 0x08000000
 upload_protocol = stlink
@@ -33,5 +48,5 @@ lib_deps =
   https://github.com/caveman99/Crypto.git#f61ae26a53f7a2d0ba5511625b8bf8eff3a35d5e
 
 lib_ignore =
-  mathertel/OneButton@~2.6.1
-  Wire
+  Wire
+  I2CKeyPad

platformio.ini

@@ -96,7 +96,7 @@ lib_deps =
   https://github.com/meshtastic/ArduinoThread.git#1ae8778c85d0a2a729f989e0b1e7d7c4dc84eef0
   nanopb/Nanopb@^0.4.9
   erriez/ErriezCRC32@^1.0.1
-  robtillaart/I2CKeyPad@^0.4.0 ; port extender with keymatrix
+  robtillaart/I2CKeyPad@^0.5.0 ; port extender with keymatrix
 
 ; Used for the code analysis in PIO Home / Inspect
 check_tool = cppcheck

src/detect/ScanI2CTwoWire.cpp

@@ -247,7 +247,7 @@ void ScanI2CTwoWire::scanPort(I2CPort port, uint8_t *address, uint8_t asize)
 
                 SCAN_SIMPLE_CASE(ST7567_ADDRESS, SCREEN_ST7567, "st7567 display found");
 #ifndef HAS_TCA9535
-                SCAN_SIMPLE_CASE(PCF8574A_ADDRESS, PCF8574A, "PCF8574A based keyboard found\n");
+                SCAN_SIMPLE_CASE(PCF8574A_ADDRESS, PCF8574A, "PCF8574A based keyboard found");
 #endif
 #ifdef HAS_NCP5623
                 SCAN_SIMPLE_CASE(NCP5623_ADDR, NCP5623, "NCP5623 RGB LED found");

src/input/peMatrixBase.cpp

@@ -6,7 +6,7 @@
 extern ScanI2C::DeviceAddress cardkb_found;
 extern uint8_t kb_model;
 
-I2CKeyPad keyPad(cardkb_found.address);
+I2CKeyPad keyPad(cardkb_found.address, cardkb_found.port == ScanI2C::WIRE1 ? &Wire1 : &Wire);
 
 PeMatrixBase::PeMatrixBase(const char *name) : concurrency::OSThread(name)
 {
@@ -24,7 +24,7 @@ int32_t PeMatrixBase::runOnce()
         // This is the first time the OSThread library has called this function, so do port setup
         firstTime = 0;
         if (!keyPad.begin()) {
-            LOG_ERROR("Failed to initialize I2C keypad\n");
+            LOG_ERROR("Failed to initialize I2C keypad");
             return disable();
         }
         keyPad.loadKeyMap(keymap);