ppr1 st7567 lcd kinda works now

docs/software/nrf52-TODO.md

@@ -5,7 +5,13 @@
 
 ## RAK815
 
-TODO:
+### PPR1 TODO
+
+* Test GPS
+* make ST7567Wire driver less ugly
+* leave LCD screen on most of the time (because it needs little power)
+
+### general nrf52 TODO:
 
 - enter SDS state at correct time (to protect battery or loss of phone contact)
 - show screen on eink when we enter SDS state (with app info and say sleeping)

src/configuration.h

@@ -139,6 +139,7 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 // -----------------------------------------------------------------------------
 
 #define SSD1306_ADDRESS 0x3C
+#define ST7567_ADDRESS 0x3F
 
 // The SH1106 controller is almost, but not quite, the same as SSD1306
 // Define this if you know you have that controller or your "SSD1306" misbehaves.

src/graphics/Screen.h

@@ -6,6 +6,8 @@
 
 #ifdef USE_SH1106
 #include <SH1106Wire.h>
+#elif defined(USE_ST7567)
+#include <ST7567Wire.h>
 #else
 #include <SSD1306Wire.h>
 #endif
@@ -250,6 +252,8 @@ class Screen : public concurrency::OSThread
     EInkDisplay dispdev;
 #elif defined(USE_SH1106)
     SH1106Wire dispdev;
+#elif defined(USE_ST7567)
+    ST7567Wire dispdev;
 #else
     SSD1306Wire dispdev;
 #endif

src/main.cpp

@@ -50,7 +50,9 @@ meshtastic::GPSStatus *gpsStatus = new meshtastic::GPSStatus();
 // Global Node status
 meshtastic::NodeStatus *nodeStatus = new meshtastic::NodeStatus();
 
-bool ssd1306_found;
+/// The I2C address of our display (if found)
+uint8_t screen_found;
+
 bool axp192_found;
 
 Router *router = NULL; // Users of router don't care what sort of subclass implements that API
@@ -72,9 +74,13 @@ void scanI2Cdevice(void)
             nDevices++;
 
             if (addr == SSD1306_ADDRESS) {
-                ssd1306_found = true;
+                screen_found = addr;
                 DEBUG_MSG("ssd1306 display found\n");
             }
+            if (addr == ST7567_ADDRESS) {
+                screen_found = addr;
+                DEBUG_MSG("st7567 display found\n");
+            }
 #ifdef AXP192_SLAVE_ADDRESS
             if (addr == AXP192_SLAVE_ADDRESS) {
                 axp192_found = true;
@@ -247,7 +253,7 @@ void setup()
 #endif
 
 #ifdef PIN_LCD_RESET
-    // FIXME - move this someplace better
+    // FIXME - move this someplace better, LCD is at address 0x3F
     pinMode(PIN_LCD_RESET, OUTPUT);
     digitalWrite(PIN_LCD_RESET, 0);
     delay(20);
@@ -270,7 +276,7 @@ void setup()
 #ifndef NO_ESP32
     // Don't init display if we don't have one or we are waking headless due to a timer event
     if (wakeCause == ESP_SLEEP_WAKEUP_TIMER)
-        ssd1306_found = false; // forget we even have the hardware
+        screen_found = 0; // forget we even have the hardware
 
     esp32Setup();
 #endif
@@ -296,11 +302,11 @@ void setup()
 #endif
 
     // Initialize the screen first so we can show the logo while we start up everything else.
-    screen = new graphics::Screen(SSD1306_ADDRESS);
+    screen = new graphics::Screen(screen_found);
 
     readFromRTC(); // read the main CPU RTC at first (in case we can't get GPS time)
 
-// If we don't have bidirectional comms, we can't even try talking to UBLOX
+    // If we don't have bidirectional comms, we can't even try talking to UBLOX
     UBloxGPS *ublox = NULL;
 #ifdef GPS_TX_PIN
     // Init GPS - first try ublox
@@ -332,7 +338,7 @@ void setup()
         gpsStatus->observe(&gps->newStatus);
     else
         DEBUG_MSG("Warning: No GPS found - running without GPS\n");
-        
+
     nodeStatus->observe(&nodeDB.newStatus);
 
     service.init();
@@ -342,11 +348,11 @@ void setup()
 #if defined(ST7735_CS) || defined(HAS_EINK)
     screen->setup();
 #else
-    if (ssd1306_found)
+    if (screen_found)
         screen->setup();
 #endif
 
-    screen->print("Started...\n");    
+    screen->print("Started...\n");
 
     // We have now loaded our saved preferences from flash
 
@@ -401,7 +407,6 @@ void setup()
 
     // Initialize Wifi
     initWifi();
-    
 
     if (!rIf)
         recordCriticalError(ErrNoRadio);

src/main.h

@@ -6,7 +6,6 @@
 #include "graphics/Screen.h"
 
 extern bool axp192_found;
-extern bool ssd1306_found;
 extern bool isCharging;
 extern bool isUSBPowered;
 

variants/ppr1/variant.h

@@ -117,6 +117,7 @@ static const uint8_t AREF = PIN_AREF;
 // LCD
 
 #define PIN_LCD_RESET 23 // active low, pulse low for 20ms at boot
+#define USE_ST7567
 
 /*
  * SPI Interfaces