sensecap indicator updates

lib/device-ui

@@ -1 +1 @@
-Subproject commit f4da01478825545aea53a6eb6442010037b78cae
+Subproject commit a3e502d3bd0e31ddd05d49f922e5cb9d78165827

variants/seeed-sensecap-indicator/platformio.ini

@@ -8,15 +8,23 @@ platform_packages =
 board = seeed-sensecap-indicator
 board_check = true
 upload_protocol = esptool
-build_type = debug
 
-build_flags = ${esp32_base.build_flags} -Og
+build_flags = ${esp32_base.build_flags}
   -Ivariants/seeed-sensecap-indicator
   -DSENSECAP_INDICATOR
+  -DCONFIG_ARDUHAL_LOG_COLORS
+  -DRADIOLIB_DEBUG_SPI=0
+  -DRADIOLIB_DEBUG_PROTOCOL=0
+  -DRADIOLIB_DEBUG_BASIC=0
+  -DRADIOLIB_VERBOSE_ASSERT=0
+  -DRADIOLIB_SPI_PARANOID=0
   -DIO_EXPANDER=0x40
+  -DIO_EXPANDER_IRQ=42
+  ;-DIO_EXPANDER_DEBUG
+  -DUSE_ARDUINO_HAL_GPIO
 
 lib_deps = ${esp32s3_base.lib_deps}
-	lovyan03/LovyanGFX@^1.1.16
+  https://github.com/mverch67/LovyanGFX#develop
   earlephilhower/ESP8266Audio@^1.9.7
   earlephilhower/ESP8266SAM@^1.0.1
 
@@ -24,13 +32,11 @@ lib_deps = ${esp32s3_base.lib_deps}
 [env:seeed-sensecap-indicator-tft]
 extends = esp32s3_base
 platform_packages =
-;    platformio/framework-arduinoespressif32 @ symlink:///home/manuel/Documents/PlatformIO/Projects/arduino-esp32-fork
+    platformio/framework-arduinoespressif32 @ symlink:///home/manuel/Documents/PlatformIO/Projects/arduino-esp32
-    platformio/framework-arduinoespressif32 @ https://github.com/mverch67/arduino-esp32.git#add_tca9535 ; based on 2.0.16
+;    platformio/framework-arduinoespressif32 @ https://github.com/mverch67/arduino-esp32.git#add_tca9535 ; based on 2.0.16
 board = seeed-sensecap-indicator
-;board_build.partitions = default_16MB.csv
 board_check = true
 upload_protocol = esptool
-build_type = debug
 build_flags = ${esp32_base.build_flags}
 	-D SENSECAP_INDICATOR
   -D MESHTASTIC_EXCLUDE_CANNEDMESSAGES=1
@@ -38,7 +44,16 @@ build_flags = ${esp32_base.build_flags}
   -D MESHTASTIC_EXCLUDE_BLUETOOTH=1
   -D MESHTASTIC_EXCLUDE_SCREEN=1
   -D MESHTASTIC_EXCLUDE_ENVIRONMENTAL_SENSOR=1
+  -D CONFIG_ARDUHAL_LOG_COLORS
+  -D RADIOLIB_DEBUG_SPI=0
+  -D RADIOLIB_DEBUG_PROTOCOL=0
+  -D RADIOLIB_DEBUG_BASIC=0
+  -D RADIOLIB_VERBOSE_ASSERT=0
+  -D RADIOLIB_SPI_PARANOID=0
   -D IO_EXPANDER=0x40
+  -D IO_EXPANDER_IRQ=42
+  ;-D IO_EXPANDER_DEBUG
+  -D USE_ARDUINO_HAL_GPIO
   -D MAX_NUM_NODES=250
   -D HAS_SCREEN=0
   -D HAS_TFT=1
@@ -54,7 +69,7 @@ build_flags = ${esp32_base.build_flags}
   -D LV_USE_LOG=0
   -D USE_LOG_DEBUG
   -D LOG_DEBUG_INC=\"DebugConfiguration.h\"
-;  -D CALIBRATE_TOUCH=0
+  -D CALIBRATE_TOUCH=0
   -D LGFX_DRIVER=LGFX_INDICATOR
   -D VIEW_320x240
 ;	-D USE_DOUBLE_BUFFER
@@ -67,6 +82,7 @@ build_src_filter = ${esp32_base.build_src_filter}
   +<../lib/device-ui/locale>
   +<../lib/device-ui/source>
 lib_deps = ${esp32s3_base.lib_deps}
-	lovyan03/LovyanGFX@^1.1.16
+  https://github.com/mverch67/LovyanGFX#develop
+;  file:///home/manuel/Documents/PlatformIO/Projects/LovyanGFX
   earlephilhower/ESP8266Audio@^1.9.7
   earlephilhower/ESP8266SAM@^1.0.1

variants/seeed-sensecap-indicator/variant.h

@@ -19,21 +19,20 @@
 #define ST7701_BL 45
 #define ST7701_SPI_HOST SPI2_HOST
 #define ST7701_BACKLIGHT_EN 45
-#define SPI_FREQUENCY 20000000
+#define SPI_FREQUENCY 12000000
-#define SPI_READ_FREQUENCY 16000000
 #define TFT_HEIGHT 480
 #define TFT_WIDTH 480
 #define TFT_OFFSET_X 0
 #define TFT_OFFSET_Y 0
-#define TFT_OFFSET_ROTATION 1
+#define TFT_OFFSET_ROTATION 0
 #define TFT_BL 45
 #define SCREEN_ROTATE
 #define SCREEN_TRANSITION_FRAMERATE 5 // fps
 
-#define HAS_TOUCHSCREEN 3
+#define HAS_TOUCHSCREEN 1
 #define SCREEN_TOUCH_INT (6 | IO_EXPANDER)
 #define SCREEN_TOUCH_RST (7 | IO_EXPANDER)
-#define TOUCH_I2C_PORT 1
+#define TOUCH_I2C_PORT 0
 #define TOUCH_SLAVE_ADDRESS 0x48
 
 // Buzzer
@@ -43,10 +42,8 @@
 #undef GPS_RX_PIN
 #undef GPS_TX_PIN
 
-// disabled until IO_EXPANDER interrupts supported
+#define USE_SX1262
-#define HAS_RADIO 0
+#define USE_SX1268
-// #define USE_SX1262
-// #define USE_SX1268
 
 #define LORA_SCK 41
 #define LORA_MISO 47
@@ -64,4 +61,3 @@
 #define SX126X_BUSY LORA_DIO2
 #define SX126X_RESET LORA_RESET
 #define SX126X_DIO2_AS_RF_SWITCH
-// #define SX126X_DIO3_TCXO_VOLTAGE 1.8