pohui_pohui/firmware
1
0
Fork 0
mirror of https://github.com/meshtastic/firmware.git synced 2025-02-02 02:39:57 +00:00
Code Issues Actions 6 Packages Projects Releases Wiki Activity

trunk fmt

Browse Source
This commit is contained in:
Thomas Göttgens 2023-08-06 16:03:04 +02:00
parent 0aef8703b6
commit bed2bfa074
1 changed files with 8 additions and 8 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

16
src/graphics/TFTDisplay.cpp
View File

@ -247,10 +247,10 @@ class LGFX : public lgfx::LGFX_Device
cfg.use_lock = true; // Set to true to use transaction locking
cfg.dma_channel = SPI_DMA_CH_AUTO; // SPI_DMA_CH_AUTO; // Set DMA channel to use (0=not use DMA / 1=1ch / 2=ch /
// SPI_DMA_CH_AUTO=auto setting)
cfg.pin_sclk = TFT_SCLK; // Set SPI SCLK pin number
cfg.pin_mosi = TFT_MOSI; // Set SPI MOSI pin number
cfg.pin_miso = TFT_MISO; // Set SPI MISO pin number (-1 = disable)
cfg.pin_dc = TFT_DC; // Set SPI DC pin number (-1 = disable)
cfg.pin_sclk = TFT_SCLK; // Set SPI SCLK pin number
cfg.pin_mosi = TFT_MOSI; // Set SPI MOSI pin number
cfg.pin_miso = TFT_MISO; // Set SPI MISO pin number (-1 = disable)
cfg.pin_dc = TFT_DC; // Set SPI DC pin number (-1 = disable)
_bus_instance.config(cfg); // applies the set value to the bus.
_panel_instance.setBus(&_bus_instance); // set the bus on the panel.
@ -260,7 +260,7 @@ class LGFX : public lgfx::LGFX_Device
auto cfg = _panel_instance.config(); // Gets a structure for display panel settings.
cfg.pin_cs = TFT_CS; // Pin number where CS is connected (-1 = disable)
cfg.pin_rst = TFT_RST; // Pin number where RST is connected (-1 = disable)
cfg.pin_rst = TFT_RST; // Pin number where RST is connected (-1 = disable)
cfg.pin_busy = TFT_BUSY; // Pin number where BUSY is connected (-1 = disable)
// The following setting values ​​are general initial values ​​for each panel, so please comment out any
@ -274,12 +274,12 @@ class LGFX : public lgfx::LGFX_Device
cfg.dummy_read_pixel = 8; // Number of bits for dummy read before pixel readout
cfg.dummy_read_bits = 1; // Number of bits for dummy read before non-pixel data read
cfg.readable = true; // Set to true if data can be read
cfg.invert = false; // Set to true if the light/darkness of the panel is reversed
cfg.invert = false; // Set to true if the light/darkness of the panel is reversed
cfg.rgb_order = false; // Set to true if the panel's red and blue are swapped
cfg.dlen_16bit =
false; // Set to true for panels that transmit data length in 16-bit units with 16-bit parallel or SPI
cfg.bus_shared = true; // If the bus is shared with the SD card, set to true (bus control with drawJpgFile etc.)
// Set the following only when the display is shifted with a driver with a variable number of pixels, such as the
// ST7735 or ILI9163.
cfg.memory_width = TFT_WIDTH; // Maximum width supported by the driver IC
@ -292,7 +292,7 @@ class LGFX : public lgfx::LGFX_Device
auto cfg = _light_instance.config(); // Gets a structure for backlight settings.
cfg.pin_bl = TFT_BL; // Pin number to which the backlight is connected
cfg.invert = false; // true to invert the brightness of the backlight
cfg.invert = false; // true to invert the brightness of the backlight
// cfg.freq = 44100; // PWM frequency of backlight
// cfg.pwm_channel = 1; // PWM channel number to use