From c62f262f632d90724bb9d76d581655b9affa67af Mon Sep 17 00:00:00 2001 From: ford-jones Date: Wed, 3 Sep 2025 13:38:39 +1200 Subject: [PATCH] Trunk fmt --- src/SerialConsole.cpp | 7 +++---- src/mesh/StreamAPI.h | 6 +++--- variants/esp32s3/t-deck-pro/variant.h | 15 +++++++------ .../nrf52840/heltec_mesh_solar/variant.cpp | 2 +- variants/nrf52840/heltec_mesh_solar/variant.h | 21 +++++++++---------- 5 files changed, 24 insertions(+), 27 deletions(-) diff --git a/src/SerialConsole.cpp b/src/SerialConsole.cpp index 093a24678..2e6ae68a5 100644 --- a/src/SerialConsole.cpp +++ b/src/SerialConsole.cpp @@ -65,10 +65,9 @@ SerialConsole::SerialConsole() : StreamAPI(&Port), RedirectablePrint(&Port), con int32_t SerialConsole::runOnce() { #ifdef HELTEC_MESH_SOLAR - //After enabling the mesh solar serial port module configuration, command processing is handled by the serial port module. - if(moduleConfig.serial.enabled && moduleConfig.serial.override_console_serial_port - && moduleConfig.serial.mode==meshtastic_ModuleConfig_SerialConfig_Serial_Mode_MS_CONFIG) - { + // After enabling the mesh solar serial port module configuration, command processing is handled by the serial port module. + if (moduleConfig.serial.enabled && moduleConfig.serial.override_console_serial_port && + moduleConfig.serial.mode == meshtastic_ModuleConfig_SerialConfig_Serial_Mode_MS_CONFIG) { return 250; } #endif diff --git a/src/mesh/StreamAPI.h b/src/mesh/StreamAPI.h index 547dd0175..4ca2c197f 100644 --- a/src/mesh/StreamAPI.h +++ b/src/mesh/StreamAPI.h @@ -50,15 +50,15 @@ class StreamAPI : public PhoneAPI * phone. */ virtual int32_t runOncePart(); - virtual int32_t runOncePart(char *buf,uint16_t bufLen); + virtual int32_t runOncePart(char *buf, uint16_t bufLen); private: /** * Read any rx chars from the link and call handleToRadio */ int32_t readStream(); - int32_t readStream(char *buf,uint16_t bufLen); - int32_t handleRecStream(char *buf,uint16_t bufLen); + int32_t readStream(char *buf, uint16_t bufLen); + int32_t handleRecStream(char *buf, uint16_t bufLen); /** * call getFromRadio() and deliver encapsulated packets to the Stream diff --git a/variants/esp32s3/t-deck-pro/variant.h b/variants/esp32s3/t-deck-pro/variant.h index abe0a772a..35cb99435 100644 --- a/variants/esp32s3/t-deck-pro/variant.h +++ b/variants/esp32s3/t-deck-pro/variant.h @@ -93,11 +93,10 @@ // Internally the TTGO module hooks the SX1262-DIO2 in to control the TX/RX switch (which is the default for the sx1262interface // code) -#define MODEM_POWER_EN 41 -#define MODEM_PWRKEY 40 -#define MODEM_RST 9 -#define MODEM_RI 7 -#define MODEM_DTR 8 -#define MODEM_RX 10 -#define MODEM_TX 11 - +#define MODEM_POWER_EN 41 +#define MODEM_PWRKEY 40 +#define MODEM_RST 9 +#define MODEM_RI 7 +#define MODEM_DTR 8 +#define MODEM_RX 10 +#define MODEM_TX 11 diff --git a/variants/nrf52840/heltec_mesh_solar/variant.cpp b/variants/nrf52840/heltec_mesh_solar/variant.cpp index 8236d7cf4..05d7a32e2 100644 --- a/variants/nrf52840/heltec_mesh_solar/variant.cpp +++ b/variants/nrf52840/heltec_mesh_solar/variant.cpp @@ -32,5 +32,5 @@ const uint32_t g_ADigitalPinMap[] = { void initVariant() { - pinMode(BQ4050_EMERGENCY_SHUTDOWN_PIN, INPUT); + pinMode(BQ4050_EMERGENCY_SHUTDOWN_PIN, INPUT); } diff --git a/variants/nrf52840/heltec_mesh_solar/variant.h b/variants/nrf52840/heltec_mesh_solar/variant.h index 33c2b2556..4165bc349 100644 --- a/variants/nrf52840/heltec_mesh_solar/variant.h +++ b/variants/nrf52840/heltec_mesh_solar/variant.h @@ -39,16 +39,15 @@ extern "C" { #define NUM_ANALOG_INPUTS (1) #define NUM_ANALOG_OUTPUTS (0) - #define PIN_LED1 (0 + 12) // green (confirmed on 1.0 board) #define LED_BLUE PIN_LED1 // fake for bluefruit library #define LED_GREEN PIN_LED1 #define LED_BUILTIN LED_GREEN -#define LED_STATE_ON 0 // State when LED is lit +#define LED_STATE_ON 0 // State when LED is lit #define HAS_NEOPIXEL // Enable the use of neopixels #define NEOPIXEL_COUNT 1 // How many neopixels are connected -#define NEOPIXEL_DATA (32+15) // gpio pin used to send data to the neopixels +#define NEOPIXEL_DATA (32 + 15) // gpio pin used to send data to the neopixels #define NEOPIXEL_TYPE (NEO_GRB + NEO_KHZ800) // type of neopixels in use /* @@ -74,13 +73,13 @@ No longer populated on PCB // I2C bus 0 // Routed to footprint for PCF8563TS RTC // Not populated on T114 V1, maybe in future? -#define PIN_WIRE_SDA (0 + 6) // P0.26 +#define PIN_WIRE_SDA (0 + 6) // P0.26 #define PIN_WIRE_SCL (0 + 26) // P0.26 // I2C bus 1 // Available on header pins, for general use #define PIN_WIRE1_SDA (0 + 30) // P0.30 -#define PIN_WIRE1_SCL (0 + 5) // P0.13 +#define PIN_WIRE1_SCL (0 + 5) // P0.13 /* * Lora radio @@ -89,14 +88,14 @@ No longer populated on PCB #define USE_SX1262 // #define USE_SX1268 #define SX126X_CS (0 + 24) // FIXME - we really should define LORA_CS instead -#define LORA_CS (0 + 24) +#define LORA_CS (0 + 24) #define SX126X_DIO1 (0 + 20) // Note DIO2 is attached internally to the module to an analog switch for TX/RX switching // #define SX1262_DIO3 (0 + 21) // This is used as an *output* from the sx1262 and connected internally to power the tcxo, do not drive from the // main // CPU? -#define SX126X_BUSY (0 + 17) +#define SX126X_BUSY (0 + 17) #define SX126X_RESET (0 + 25) // Not really an E22 but TTGO seems to be trying to clone that #define SX126X_DIO2_AS_RF_SWITCH @@ -134,16 +133,16 @@ No longer populated on PCB // For LORA, spi 0 #define PIN_SPI_MISO (0 + 23) #define PIN_SPI_MOSI (0 + 22) -#define PIN_SPI_SCK (0 + 19) +#define PIN_SPI_SCK (0 + 19) // #define PIN_PWR_EN (0 + 6) // To debug via the segger JLINK console rather than the CDC-ACM serial device // #define USE_SEGGER -#define BQ4050_SDA_PIN (32+1) // I2C data line pin -#define BQ4050_SCL_PIN (32+0) // I2C clock line pin -#define BQ4050_EMERGENCY_SHUTDOWN_PIN (32+3) // Emergency shutdown pin +#define BQ4050_SDA_PIN (32 + 1) // I2C data line pin +#define BQ4050_SCL_PIN (32 + 0) // I2C clock line pin +#define BQ4050_EMERGENCY_SHUTDOWN_PIN (32 + 3) // Emergency shutdown pin #define HAS_RTC 0 #ifdef __cplusplus