#697 Disable internal pullup on this board.

This commit is contained in:
Jm 2021-02-19 18:19:14 -08:00
parent 47b942ca00
commit c690f81574

View File

@ -355,9 +355,14 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#define VEXT_ENABLE 21 // active low, powers the oled display and the lora antenna boost
#define LED_PIN 25 // If defined we will blink this LED
#define BUTTON_PIN \
34 // If defined, this will be used for user button presses, if your board doesn't have a physical switch, you can wire one
12 // If defined, this will be used for user button presses, if your board doesn't have a physical switch, you can wire one
// between this pin and ground
#define BUTTON_NEED_PULLUP
/* Don't enable the internal pull up on the TLORA_V2_1_16. GPIO 12 is connected to a bidirectional
diode. If someone needs to use a button, they should connect an external pull up that's stronger
than what's built into the esp32
*/
// #define BUTTON_NEED_PULLUP
#define USE_RF95
#define LORA_DIO0 26 // a No connect on the SX1262 module