Crowpanel 4.3, 5.0, 7.0 support (#6611)

* SD software SPI control
* fix notification crash;
* allow wake on touch
* don't build non-MUI variants
* use pwm buzzer
* Finalize support for Crowpanel TFT 2.4, 2.8 and 3.5
* add hardware ID for TFT panels
* Add stubs for the bigger panels. WIP!
* fix braces
* elecrow 4.3, 5.0, 7.0 support
* completed implementation 4.3, 5.0, 7.0 variants
* NodeDB default config & simplified light sleep macros
* trunk fmt
* remove flags
* removed leftovers (note: rtc gpios are only needed for deep sleep; the remove section caused issues with the elecrows)
---------
Co-authored-by: mverch67 <manuel.verch@gmx.de>
Co-authored-by: Manuel <71137295+mverch67@users.noreply.github.com>
Co-authored-by: Austin <vidplace7@gmail.com>

boards/crowpanel.json

@@ -8,8 +8,8 @@
     "core": "esp32",
     "extra_flags": [
       "-DBOARD_HAS_PSRAM",
-      "-DARDUINO_USB_CDC_ON_BOOT=1",
+      "-DARDUINO_USB_CDC_ON_BOOT=0",
-      "-DARDUINO_USB_MODE=0",
+      "-DARDUINO_USB_MODE=1",
       "-DARDUINO_RUNNING_CORE=1",
       "-DARDUINO_EVENT_RUNNING_CORE=0"
     ],

src/graphics/ScreenFonts.h

@@ -65,8 +65,8 @@
 #endif
 
 #if (defined(USE_EINK) || defined(ILI9341_DRIVER) || defined(ILI9342_DRIVER) || defined(ST7701_CS) || defined(ST7735_CS) ||      \
-     defined(ST7789_CS) || defined(USE_ST7789) || defined(HX8357_CS)) ||                                                         \
+     defined(ST7789_CS) || defined(USE_ST7789) || defined(HX8357_CS) || defined(ILI9488_CS)) &&                                  \
-    defined(ILI9488_CS) && !defined(DISPLAY_FORCE_SMALL_FONTS)
+    !defined(DISPLAY_FORCE_SMALL_FONTS)
 // The screen is bigger so use bigger fonts
 #define FONT_SMALL FONT_MEDIUM_LOCAL // Height: 19
 #define FONT_MEDIUM FONT_LARGE_LOCAL // Height: 28

src/mesh/NodeDB.cpp

@@ -584,7 +584,7 @@ void NodeDB::installDefaultConfig(bool preserveKey = false)
     strncpy(config.network.ntp_server, "meshtastic.pool.ntp.org", 32);
 
 #if (defined(T_DECK) || defined(T_WATCH_S3) || defined(UNPHONE) || defined(PICOMPUTER_S3) || defined(SENSECAP_INDICATOR) ||      \
-     defined(ELECROW)) &&                                                                                                        \
+     defined(ELECROW_PANEL)) &&                                                                                                  \
     HAS_TFT
     // switch BT off by default; use TFT programming mode or hotkey to enable
     config.bluetooth.enabled = false;
@@ -689,7 +689,7 @@ void NodeDB::initConfigIntervals()
 
     config.display.screen_on_secs = default_screen_on_secs;
 
-#if defined(T_WATCH_S3) || defined(T_DECK) || defined(UNPHONE) || defined(MESH_TAB) || defined(RAK14014) || defined(ELECROW)
+#if defined(USE_POWERSAVE)
     config.power.is_power_saving = true;
     config.display.screen_on_secs = 30;
     config.power.wait_bluetooth_secs = 30;

src/sleep.cpp

@@ -24,6 +24,7 @@
 #include "mesh/wifi/WiFiAPClient.h"
 #endif
 #include "rom/rtc.h"
+#include <RadioLib.h>
 #include <driver/rtc_io.h>
 #include <driver/uart.h>
 
@@ -284,6 +285,8 @@ void doDeepSleep(uint32_t msecToWake, bool skipPreflight = false, bool skipSaveN
     pinMode(LORA_CS, OUTPUT);
     digitalWrite(LORA_CS, HIGH);
     gpio_hold_en((gpio_num_t)LORA_CS);
+#elif defined(ELECROW_PANEL)
+    // Elecrow panels do not use LORA_CS, do nothing
 #else
     if (GPIO_IS_VALID_OUTPUT_GPIO(LORA_CS)) {
         // LoRa CS (RADIO_NSS) needs to stay HIGH, even during deep sleep
@@ -400,7 +403,7 @@ esp_sleep_wakeup_cause_t doLightSleep(uint64_t sleepMsec) // FIXME, use a more r
 #ifdef INPUTDRIVER_ENCODER_BTN
     gpio_wakeup_enable((gpio_num_t)INPUTDRIVER_ENCODER_BTN, GPIO_INTR_LOW_LEVEL);
 #endif
-#if defined(T_WATCH_S3) || defined(ELECROW)
+#if defined(WAKE_ON_TOUCH)
     gpio_wakeup_enable((gpio_num_t)SCREEN_TOUCH_INT, GPIO_INTR_LOW_LEVEL);
 #endif
     enableLoraInterrupt();
@@ -433,11 +436,12 @@ esp_sleep_wakeup_cause_t doLightSleep(uint64_t sleepMsec) // FIXME, use a more r
     // Disable wake-on-button interrupt. Re-attach normal button-interrupts
     gpio_wakeup_disable(pin);
 #endif
-
+#if defined(INPUTDRIVER_ENCODER_BTN)
-#if defined(T_WATCH_S3) || defined(ELECROW)
+    gpio_wakeup_disable((gpio_num_t)INPUTDRIVER_ENCODER_BTN);
+#endif
+#if defined(WAKE_ON_TOUCH)
     gpio_wakeup_disable((gpio_num_t)SCREEN_TOUCH_INT);
 #endif
-
 #if !defined(SOC_PM_SUPPORT_EXT_WAKEUP) && defined(LORA_DIO1) && (LORA_DIO1 != RADIOLIB_NC)
     if (radioType != RF95_RADIO) {
         gpio_wakeup_disable((gpio_num_t)LORA_DIO1);
@@ -506,23 +510,24 @@ bool shouldLoraWake(uint32_t msecToWake)
 
 void enableLoraInterrupt()
 {
+    esp_err_t res;
 #if SOC_PM_SUPPORT_EXT_WAKEUP && defined(LORA_DIO1) && (LORA_DIO1 != RADIOLIB_NC)
-    gpio_pulldown_en((gpio_num_t)LORA_DIO1);
+    res = gpio_pulldown_en((gpio_num_t)LORA_DIO1);
+    if (res != ESP_OK) {
+        LOG_ERROR("gpio_pulldown_en(LORA_DIO1) result %d", res);
+    }
 #if defined(LORA_RESET) && (LORA_RESET != RADIOLIB_NC)
-    gpio_pullup_en((gpio_num_t)LORA_RESET);
+    res = gpio_pullup_en((gpio_num_t)LORA_RESET);
+    if (res != ESP_OK) {
+        LOG_ERROR("gpio_pullup_en(LORA_RESET) result %d", res);
+    }
 #endif
-#if defined(LORA_CS) && (LORA_CS != RADIOLIB_NC)
+#if defined(LORA_CS) && (LORA_CS != RADIOLIB_NC) && !defined(ELECROW_PANEL)
     gpio_pullup_en((gpio_num_t)LORA_CS);
 #endif
 
-    if (rtc_gpio_is_valid_gpio((gpio_num_t)LORA_DIO1)) {
+    LOG_INFO("setup LORA_DIO1 (GPIO%02d) with wakeup by gpio interrupt", LORA_DIO1);
-        // Setup light/deep sleep with wakeup by external source
+    gpio_wakeup_enable((gpio_num_t)LORA_DIO1, GPIO_INTR_HIGH_LEVEL);
-        LOG_INFO("setup LORA_DIO1 (GPIO%02d) with wakeup by external source", LORA_DIO1);
-        esp_sleep_enable_ext0_wakeup((gpio_num_t)LORA_DIO1, HIGH);
-    } else {
-        LOG_INFO("setup LORA_DIO1 (GPIO%02d) with wakeup by gpio interrupt", LORA_DIO1);
-        gpio_wakeup_enable((gpio_num_t)LORA_DIO1, GPIO_INTR_HIGH_LEVEL);
-    }
 
 #elif defined(LORA_DIO1) && (LORA_DIO1 != RADIOLIB_NC)
     if (radioType != RF95_RADIO) {

variants/elecrow_panel/pins_arduino.h

@@ -3,13 +3,11 @@
 
 #include <stdint.h>
 
-// static const uint8_t LED_BUILTIN = -1;
+static const uint8_t TX = 43;
+static const uint8_t RX = 44;
 
-// static const uint8_t TX = 43;
+static const uint8_t SDA = 15;
-// static const uint8_t RX = 44;
+static const uint8_t SCL = 16;
-
-static const uint8_t SDA = 39;
-static const uint8_t SCL = 40;
 
 // Default SPI will be mapped to Radio
 static const uint8_t SS = -1;
@@ -17,13 +15,9 @@ static const uint8_t MOSI = 48;
 static const uint8_t MISO = 47;
 static const uint8_t SCK = 41;
 
-#ifndef CROW_SELECT
 static const uint8_t SPI_MOSI = 6;
 static const uint8_t SPI_SCK = 5;
 static const uint8_t SPI_MISO = 4;
-static const uint8_t SPI_CS = 7; // SD does not support -1
-static const uint8_t SDCARD_CS = SPI_CS;
-#endif
 
 static const uint8_t A0 = 1;
 static const uint8_t A1 = 2;

variants/elecrow_panel/platformio.ini

@@ -4,10 +4,8 @@ board = crowpanel
 board_check = true
 upload_protocol = esptool
 board_build.partitions = default_16MB.csv ; must be here for some reason, board.json is not enough !?
-
 build_flags = ${esp32s3_base.build_flags} -Os
   -I variants/elecrow_panel
-  -D ELECROW
   -D ELECROW_PANEL
   -D CONFIG_ARDUHAL_LOG_COLORS
   -D RADIOLIB_DEBUG_SPI=0
@@ -22,15 +20,15 @@ build_flags = ${esp32s3_base.build_flags} -Os
   -D MESHTASTIC_EXCLUDE_SOCKETAPI=1
   -D MESHTASTIC_EXCLUDE_SCREEN=1
   -D MESHTASTIC_EXCLUDE_ENVIRONMENTAL_SENSOR=1
-;  -D INPUTDRIVER_BUTTON_TYPE=0
   -D HAS_TELEMETRY=0
   -D CONFIG_DISABLE_HAL_LOCKS=1
+  -D USE_PIN_BUZZER
   -D HAS_SCREEN=0
   -D HAS_TFT=1
   -D RAM_SIZE=6144
-	-D LV_LVGL_H_INCLUDE_SIMPLE
+  -D LV_LVGL_H_INCLUDE_SIMPLE
-	-D LV_CONF_INCLUDE_SIMPLE
+  -D LV_CONF_INCLUDE_SIMPLE
-	-D LV_COMP_CONF_INCLUDE_SIMPLE
+  -D LV_COMP_CONF_INCLUDE_SIMPLE
   -D LV_USE_SYSMON=0
   -D LV_USE_PROFILER=0
   -D LV_USE_PERF_MONITOR=0
@@ -40,29 +38,44 @@ build_flags = ${esp32s3_base.build_flags} -Os
   -D USE_LOG_DEBUG
   -D LOG_DEBUG_INC=\"DebugConfiguration.h\"
   -D USE_PACKET_API
+  -D HAS_SDCARD
+  -D SD_SPI_FREQUENCY=75000000
 
 lib_deps = ${esp32s3_base.lib_deps}
   ${device-ui_base.lib_deps}
-  earlephilhower/ESP8266Audio@^1.9.9
+  earlephilhower/ESP8266Audio@1.9.9
-  earlephilhower/ESP8266SAM@^1.0.1
+  earlephilhower/ESP8266SAM@1.0.1
-  lovyan03/LovyanGFX@^1.2.0
+  lovyan03/LovyanGFX@1.2.0 ; note: v1.2.7 breaks the elecrow 7" display functionality
-  hideakitai/TCA9534@^0.1.1
+  hideakitai/TCA9534@0.1.1
 
-[env:elecrow-24-28-tft]
+[crowpanel_small] ; 2.4, 2.8, 3.5 inch
 extends = crowpanel_base
-
 build_flags =
   ${crowpanel_base.build_flags}
-  -D TFT_HEIGHT=320 ; needed in variant.h
+  -D CROW_SELECT=1
-  -D HAS_SDCARD
   -D SDCARD_USE_SOFT_SPI
+  -D SDCARD_CS=7
   -D SPI_DRIVER_SELECT=2
-  -D USE_PIN_BUZZER
-;  -D INPUTDRIVER_BUTTON_TYPE=0 ; no button as this pin is assigned to LoRa cs!
-  -D SCREEN_TOUCH_INT=47 ; used to wake up the MCU by touch
   -D LGFX_DRIVER_TEMPLATE
   -D LGFX_DRIVER=LGFX_GENERIC
   -D GFX_DRIVER_INC=\"graphics/LGFX/LGFX_GENERIC.h\"
+  -D VIEW_320x240
+  -D MAP_FULL_REDRAW
+
+[crowpanel_large] ; 4.3, 5.0, 7.0 inch
+extends = crowpanel_base
+build_flags =
+  ${crowpanel_base.build_flags}
+  -D CROW_SELECT=2
+  -D SDCARD_CS=7
+  -D LGFX_DRIVER=LGFX_ELECROW70
+  -D GFX_DRIVER_INC=\"graphics/LGFX/LGFX_ELECROW70.h\"
+  -D DISPLAY_SET_RESOLUTION
+
+[env:elecrow-adv-24-28-tft]
+extends = crowpanel_small
+build_flags =
+  ${crowpanel_small.build_flags}
   -D SPI_FREQUENCY=80000000
   -D LGFX_SCREEN_WIDTH=240
   -D LGFX_SCREEN_HEIGHT=320
@@ -81,25 +94,12 @@ build_flags =
   -D LGFX_TOUCH_INT=47
   -D LGFX_TOUCH_RST=48
   -D LGFX_TOUCH_ROTATION=0
-  -D VIEW_320x240
-  -D MAP_FULL_REDRAW
-
-[env:elecrow-35-tft]
-extends = crowpanel_base
 
+[env:elecrow-adv-35-tft]
+extends = crowpanel_small
 build_flags =
-  ${crowpanel_base.build_flags}
+  ${crowpanel_small.build_flags}
-  -D TFT_HEIGHT=480 ; needed in variant.h
-  -D HAS_SDCARD
-  -D SDCARD_USE_SOFT_SPI
-  -D SPI_DRIVER_SELECT=2
-  -D USE_PIN_BUZZER
-;  -D INPUTDRIVER_BUTTON_TYPE=0 ; no button as this pin is assigned to LoRa cs!
-  -D SCREEN_TOUCH_INT=47 ; used to wake up the MCU by touch
   -D LV_CACHE_DEF_SIZE=2097152
-  -D LGFX_DRIVER_TEMPLATE
-  -D LGFX_DRIVER=LGFX_GENERIC
-  -D GFX_DRIVER_INC=\"graphics/LGFX/LGFX_GENERIC.h\"
   -D SPI_FREQUENCY=60000000
   -D LGFX_SCREEN_WIDTH=320
   -D LGFX_SCREEN_HEIGHT=480
@@ -119,5 +119,10 @@ build_flags =
   -D LGFX_TOUCH_RST=48
   -D LGFX_TOUCH_ROTATION=0
   -D DISPLAY_SET_RESOLUTION
+
+; 4.3, 5.0, 7.0 inch 800x480 IPS (V1)
+[env:elecrow-adv1-43-50-70-tft]
+extends = crowpanel_large
+build_flags =
+  ${crowpanel_large.build_flags}
   -D VIEW_320x240
-  -D MAP_FULL_REDRAW

variants/elecrow_panel/variant.h

@@ -1,124 +1,14 @@
 #define I2C_SDA 15
 #define I2C_SCL 16
 
-#if TFT_HEIGHT == 320 && not defined(HAS_TFT) // 2.4 and 2.8 TFT
+#if CROW_SELECT == 1
-// ST7789 TFT LCD
+#define WAKE_ON_TOUCH
-#define ST7789_CS 40
-#define ST7789_RS 41  // DC
-#define ST7789_SDA 39 // MOSI
-#define ST7789_SCK 42
-#define ST7789_RESET -1
-#define ST7789_MISO 38
-#define ST7789_BUSY -1
-#define ST7789_BL 38
-#define ST7789_SPI_HOST SPI2_HOST
-#define TFT_BL 38
-#define SPI_FREQUENCY 60000000
-#define SPI_READ_FREQUENCY 16000000
-#define TFT_OFFSET_ROTATION 0
-#define SCREEN_ROTATE
-#define TFT_DUMMY_READ_PIXELS 8
-#define SCREEN_TRANSITION_FRAMERATE 5
-#define BRIGHTNESS_DEFAULT 130 // Medium Low Brightness
-
-#define HAS_TOUCHSCREEN 1
 #define SCREEN_TOUCH_INT 47
-#define SCREEN_TOUCH_RST 48
+#define USE_POWERSAVE
-#define TOUCH_I2C_PORT 0
+#define SLEEP_TIME 180
-#define TOUCH_SLAVE_ADDRESS 0x38 // FT5x06
 #endif
 
-#if TFT_HEIGHT == 480 && not defined(HAS_TFT) // 3.5 TFT
+#if CROW_SELECT == 1
-// ILI9488 TFT LCD
-#define ILI9488_CS 40
-#define ILI9488_RS 41  // DC
-#define ILI9488_SDA 39 // MOSI
-#define ILI9488_SCK 42
-#define ILI9488_RESET -1
-#define ILI9488_MISO 38
-#define ILI9488_BUSY -1
-#define ILI9488_BL 38
-#define ILI9488_SPI_HOST SPI2_HOST
-#define TFT_BL 38
-#define SPI_FREQUENCY 40000000
-#define SPI_READ_FREQUENCY 16000000
-#define TFT_OFFSET_ROTATION 0
-#define SCREEN_ROTATE
-#define TFT_DUMMY_READ_PIXELS 8
-#define SCREEN_TRANSITION_FRAMERATE 5
-#define BRIGHTNESS_DEFAULT 130 // Medium Low Brightness
-
-#define HAS_TOUCHSCREEN 1
-#define SCREEN_TOUCH_INT 47
-#define SCREEN_TOUCH_RST 48
-#define TOUCH_I2C_PORT 0
-#define TOUCH_SLAVE_ADDRESS 0x5D // GT911
-#endif
-
-#ifdef CROW_SELECT
-#define ST72xx_DE 42
-#define ST72xx_VSYNC 41
-#define ST72xx_HSYNC 40
-#define ST72xx_PCLK 39
-#define ST72xx_R0 7
-#define ST72xx_R1 17
-#define ST72xx_R2 18
-#define ST72xx_R3 3
-#define ST72xx_R4 46
-#define ST72xx_G0 9
-#define ST72xx_G1 10
-#define ST72xx_G2 11
-#define ST72xx_G3 12
-#define ST72xx_G4 13
-#define ST72xx_G5 14
-#define ST72xx_B0 21
-#define ST72xx_B1 47
-#define ST72xx_B2 48
-#define ST72xx_B3 45
-#define ST72xx_B4 38
-
-#define HAS_TOUCHSCREEN 1
-#define TOUCH_I2C_PORT 0
-#define TOUCH_SLAVE_ADDRESS 0x5D // GT911
-#endif
-
-#if defined(CROW_SELECT) && CROW_SELECT == 1 // 4.3 TFT 800x480
-#define ST7265_HSYNC_POLARITY 0
-#define ST7265_HSYNC_FRONT_PORCH 24
-#define ST7265_HSYNC_PULSE_WIDTH 8
-#define ST7265_HSYNC_BACK_PORCH 24
-#define ST7265_VSYNC_POLARITY 1
-#define ST7265_VSYNC_FRONT_PORCH 24
-#define ST7265_VSYNC_PULSE_WIDTH 8
-#define ST7265_VSYNC_BACK_PORCH 24
-#define ST7265_PCLK_ACTIVE_NEG 1
-#endif
-
-#if defined(CROW_SELECT) && CROW_SELECT == 2 // 5.0 TFT 800x480
-#define ST7262_HSYNC_POLARITY 0
-#define ST7262_HSYNC_FRONT_PORCH 8
-#define ST7262_HSYNC_PULSE_WIDTH 4
-#define ST7262_HSYNC_BACK_PORCH 8
-#define ST7262_VSYNC_POLARITY 0
-#define ST7262_VSYNC_FRONT_PORCH 8
-#define ST7262_VSYNC_PULSE_WIDTH 4
-#define ST7262_VSYNC_BACK_PORCH 8
-#define ST7262_PCLK_ACTIVE_NEG 0
-#endif
-
-#if defined(CROW_SELECT) && CROW_SELECT == 3 // 7.0 TFT 800x480
-#define SC7277_HSYNC_POLARITY 0
-#define SC7277_HSYNC_FRONT_PORCH 8
-#define SC7277_HSYNC_PULSE_WIDTH 4
-#define SC7277_HSYNC_BACK_PORCH 8
-#define SC7277_VSYNC_POLARITY 0
-#define SC7277_VSYNC_FRONT_PORCH 8
-#define SC7277_VSYNC_PULSE_WIDTH 4
-#define SC7277_VSYNC_BACK_PORCH 8
-#define SC7277_PCLK_ACTIVE_NEG 0
-#endif
-
-#if TFT_HEIGHT == 320 // 2.4-2.8 have I2S audio
 // dac / amp
 // #define HAS_I2S // didn't get I2S sound working
 #define PIN_BUZZER 8 // using pwm buzzer instead (nobody will notice, lol)
@@ -131,10 +21,16 @@
 #endif
 
 // GPS via UART1 connector
-#define HAS_GPS 1
 #define GPS_DEFAULT_NOT_PRESENT 1
+#define HAS_GPS 1
+#if CROW_SELECT == 1
 #define GPS_RX_PIN 18
 #define GPS_TX_PIN 17
+#else
+// GPIOs shared with LoRa or MIC module
+#define GPS_RX_PIN 19
+#define GPS_TX_PIN 20
+#endif
 
 // Extension Slot Layout, viewed from above (2.4-3.5)
 // DIO1/IO1 o   o IO2/NRESET
@@ -158,9 +54,11 @@
 
 // LoRa
 #define USE_SX1262
-#define LORA_CS 0 // GND
 
-#if TFT_HEIGHT == 320 || TFT_HEIGHT == 480 // 2.4 - 3.5 TFT
+#if CROW_SELECT == 1
+// 2.4", 2.8, 3.5"""
+#define HW_SPI1_DEVICE
+#define LORA_CS 0
 #define LORA_SCK 10
 #define LORA_MISO 9
 #define LORA_MOSI 3
@@ -173,6 +71,8 @@
 #define SENSOR_POWER_CTRL_PIN 45
 #define SENSOR_POWER_ON LOW
 #else
+// 4.3", 5.0", 7.0"
+#define LORA_CS 0
 #define LORA_SCK 5
 #define LORA_MISO 4
 #define LORA_MOSI 6
@@ -182,14 +82,9 @@
 #define LORA_DIO2 2  // SX1262 BUSY
 #endif
 
-#define HW_SPI1_DEVICE
 #define SX126X_CS LORA_CS
 #define SX126X_DIO1 LORA_DIO1
 #define SX126X_BUSY LORA_DIO2
 #define SX126X_RESET LORA_RESET
 #define SX126X_DIO2_AS_RF_SWITCH
-
 #define SX126X_DIO3_TCXO_VOLTAGE 3.3
-
-#define USE_VIRTUAL_KEYBOARD 1
-#define DISPLAY_CLOCK_FRAME 1

variants/mesh-tab/variant.h

@@ -3,7 +3,8 @@
 
 #define HAS_TOUCHSCREEN 1
 
-#define SLEEP_TIME 120
+#define USE_POWERSAVE
+#define SLEEP_TIME 180
 
 // Analog pins
 #define BATTERY_PIN 4 // A battery voltage measurement pin, voltage divider connected here to measure battery voltage

variants/rak_wismeshtap/variant.h

@@ -305,6 +305,9 @@ SO GPIO 39/TXEN MAY NOT BE DEFINED FOR SUCCESSFUL OPERATION OF THE SX1262 - TG
 #define HAS_TOUCHSCREEN 1
 #define SCREEN_TOUCH_INT WB_IO6
 
+#define USE_POWERSAVE
+#define SLEEP_TIME 120
+
 #define CANNED_MESSAGE_MODULE_ENABLE 1
 #define USE_VIRTUAL_KEYBOARD 1
 /*----------------------------------------------------------------------------

variants/t-deck/variant.h

@@ -31,6 +31,7 @@
 #define TOUCH_I2C_PORT 0
 #define TOUCH_SLAVE_ADDRESS 0x5D // GT911
 
+#define USE_POWERSAVE
 #define SLEEP_TIME 120
 
 #ifndef HAS_TFT

variants/t-watch-s3/variant.h

@@ -24,7 +24,9 @@
 #define SCREEN_TOUCH_USE_I2C1
 #define TOUCH_I2C_PORT 1
 #define TOUCH_SLAVE_ADDRESS 0x38
+#define WAKE_ON_TOUCH
 
+#define USE_POWERSAVE
 #define SLEEP_TIME 180
 
 #define I2C_SDA1 39 // Used for capacitive touch

variants/unphone/variant.h

@@ -41,6 +41,9 @@
 #define USE_XPT2046 1
 #define TOUCH_CS 38
 
+#define USE_POWERSAVE
+#define SLEEP_TIME 180
+
 #define HAS_GPS                                                                                                                  \
     0 // the unphone doesn't have a gps module by default (though
       // GPS featherwing -- https://www.adafruit.com/product/3133