clean up configuration.h and add support for ttgo-lora-v1 boards

bin/build-all.sh

@@ -15,6 +15,7 @@ ARCHIVEDIR=release/archive
 
 rm -f $OUTDIR/firmware*
 
+# build the named environment and copy the bins to the release directory
 function do_build {
     ENV_NAME=$1
     echo "Building for $ENV_NAME with $PLATFORMIO_BUILD_FLAGS"
@@ -33,6 +34,7 @@ for COUNTRY in $COUNTRIES; do
 
     export PLATFORMIO_BUILD_FLAGS="$COMMONOPTS"
 
+    do_build "ttgo-lora32-v1"
     do_build "tbeam"
     do_build "heltec"
 done

platformio.ini

@@ -17,8 +17,6 @@ hw_version = US
 
 [env]
 platform = espressif32
-; board = ttgo-t-beam
-; board = heltec_wifi_lora_32_V2
 framework = arduino
 
 ; customize the partition table
@@ -79,3 +77,10 @@ lib_deps =
 [env:heltec]
 ;build_type = debug ; to make it possible to step through our jtag debugger 
 board = heltec_wifi_lora_32_V2
+
+[env:ttgo-lora32-v1]
+board = ttgo-lora32-v1
+
+; note: the platformio definition for lora32-v2 seems stale, it is missing a pins_arduino.h file, therefore I don't think it works
+; [env:ttgo-lora32-v2]
+; board = ttgo-lora32-v2

src/configuration.h

@@ -39,16 +39,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 // Configuration
 // -----------------------------------------------------------------------------
 
-// Select which board is being used. If the outside build environment has sent a choice, just use that
-#if !defined(ARDUINO_T_Beam) && !defined(ARDUINO_HELTEC_WIFI_LORA_32_V2)
-// The platformio build environment should set this now
-// #define ARDUINO_T_Beam // AKA Rev1 (second board released)
-// #define ARDUINO_HELTEC_WIFI_LORA_32_V2
-
-#define HW_VERSION_US // We encode the hardware freq range in the hw version string, so sw update can eventually install the
-                      // correct build
-#endif
-
 // If we are using the JTAG port for debugging, some pins must be left free for that (and things like GPS have to be disabled)
 // we don't support jtag on the ttgo - access to gpio 12 is a PITA
 #ifdef ARDUINO_HELTEC_WIFI_LORA_32_V2
@@ -108,7 +98,7 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 #if defined(ARDUINO_T_Beam)
 // This string must exactly match the case used in release file names or the android updater won't work
-#define HW_VENDOR "TBEAM"
+#define HW_VENDOR "tbeam"
 
 // #define BUTTON_NEED_PULLUP // if set we need to turn on the internal CPU pullup during sleep
 
@@ -129,25 +119,59 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 #elif defined(ARDUINO_HELTEC_WIFI_LORA_32_V2)
 // This string must exactly match the case used in release file names or the android updater won't work
-#define HW_VENDOR "HELTEC"
+#define HW_VENDOR "heltec"
 
-#ifndef USE_JTAG // gpio15 is TDO for JTAG, so no I2C on this board while doing jtag
+#ifndef USE_JTAG  // gpio15 is TDO for JTAG, so no I2C on this board while doing jtag
-#define I2C_SDA 4
+#define I2C_SDA 4 // I2C pins for this board
 #define I2C_SCL 15
 #endif
 
-#define RESET_OLED 16
+#define RESET_OLED 16 // If defined, this pin will be used to reset the display controller
 
 #define VEXT_ENABLE 21 // active low, powers the oled display and the lora antenna boost
-#define LED_PIN 25
+#define LED_PIN 25     // If defined we will blink this LED
-#define BUTTON_PIN 0
+#define BUTTON_PIN 0   // If defined, this will be used for user button presses
 
 #ifndef USE_JTAG
-#define RESET_GPIO 14
+#define RESET_GPIO 14 // If defined, this pin will be used to reset the LORA radio
 #endif
 #define DIO0_GPIO 26
-#define DIO1_GPIO 35
+#define DIO1_GPIO 35 // DIO1 & DIO2 are not currently used, but they must be assigned to a pin number
-#define DIO2_GPIO 34
+#define DIO2_GPIO 34 // DIO1 & DIO2 are not currently used, but they must be assigned to a pin number
+#elif defined(ARDUINO_TTGO_LoRa32_V1)
+// This string must exactly match the case used in release file names or the android updater won't work
+#define HW_VENDOR "ttgo-lora32-v1"
+
+#define I2C_SDA 4 // I2C pins for this board
+#define I2C_SCL 15
+
+#define RESET_OLED 16 // If defined, this pin will be used to reset the display controller
+
+// #define VEXT_ENABLE 21 // active low, powers the oled display and the lora antenna boost
+#define LED_PIN 2     // If defined we will blink this LED
+#define BUTTON_PIN 0  // If defined, this will be used for user button presses
+
+#define RESET_GPIO 23 // If defined, this pin will be used to reset the LORA radio
+#define DIO0_GPIO 26  // IRQ line for the LORA radio
+#define DIO1_GPIO 35  // DIO1 & DIO2 are not currently used, but they must be assigned to a pin number
+#define DIO2_GPIO 34  // DIO1 & DIO2 are not currently used, but they must be assigned to a pin number
+#elif defined(ARDUINO_TTGO_LoRa32_V2)
+// This string must exactly match the case used in release file names or the android updater won't work
+#define HW_VENDOR "ttgo-lora32-v2"
+
+#define I2C_SDA 21 // I2C pins for this board
+#define I2C_SCL 22
+
+#define RESET_OLED 16 // If defined, this pin will be used to reset the display controller
+
+#define VEXT_ENABLE 21 // active low, powers the oled display and the lora antenna boost
+#define LED_PIN 2      // If defined we will blink this LED
+#define BUTTON_PIN 0   // If defined, this will be used for user button presses
+
+#define RESET_GPIO 23 // If defined, this pin will be used to reset the LORA radio
+#define DIO0_GPIO 26  // IRQ line for the LORA radio
+#define DIO1_GPIO 35  // DIO1 & DIO2 are not currently used, but they must be assigned to a pin number
+#define DIO2_GPIO 34  // DIO1 & DIO2 are not currently used, but they must be assigned to a pin number
 #endif
 
 // -----------------------------------------------------------------------------