Support native configuration Waveshare Pico LoRa module on Orange Pi Zero3 (#7295)

* Fix LED pinout for T-Echo board marked v1.0, date 2021-6-28

* Merge PR #420

* Fixed double and missing Default class.

* Use correct format specifier and fixed typo.

* Removed duplicate code.

* Fix error: #if with no expression

* Fix warning: extra tokens at end of #endif directive.

* Fix antenna switching logic. Complementary-pin control logic is required on the rp2040-lora board.

* Fix deprecated macros.

* Set RP2040 in dormant mode when deep sleep is triggered.

* Fix array out of bounds read.

* Admin key count needs to be set otherwise the key will be zero loaded after reset.

* Don't reset the admin key size when loading defaults. Preserve an existing key in config if possible.

* Remove log spam when reading INA voltage sensor.

* Remove static declaration for admin keys from userPrefs.h. Load hard coded admin keys in case config file has empty slots.

* Removed newlines from log.

* Fix issue #5665.

* Fix build for Pico2 RP2350 platform.

* Enable Wifi client on Pico2W.

* Use correct processor on Pico2.

* Fix deprecated warning.

* Update platform and framework for RP2350.

* Added Pico2W variant including Wifi support.

* Fix typo in used variant.

* Remove obsolete define.

* Fix for native Linux build.

* Simplify RP2350 platform tag reference.

Co-authored-by: Austin <vidplace7@gmail.com>

* Cast user prefs strings.

* Update to last successfully building platform package.

* Define I2C GPIOs to ensure usage of both ports. Possibly fixes #5361

* RAK11310 support for RAK12002 RTC added.

* Update platform and framework packages to 4.4.3.

* Use RP2040 base platform and framework package. Use RAK11300 board definition in arduino-pico framework.

* Use RAK11300 board definition in arduino-pico framework.

* Fix build when MESHTASTIC_EXCLUDE_GPS is defined.

* Added configuration for Waveshare Pico LoRa module in combination with Orange Pi Zero3.

* Equal to upstream master.

---------

Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
Co-authored-by: Thomas Göttgens <tgoettgens@gmail.com>
Co-authored-by: GUVWAF <78759985+GUVWAF@users.noreply.github.com>
Co-authored-by: Austin <vidplace7@gmail.com>
Co-authored-by: Tom Fifield <tom@tomfifield.net>

bin/config.d/lora-ws-raspberry-pico-to-orangepi-03.yaml

@@ -0,0 +1,52 @@
+# https://www.waveshare.com/pico-lora-sx1262-868m.htm
+# http://www.orangepi.org/html/hardWare/computerAndMicrocontrollers/details/Orange-Pi-Zero-3.html
+#
+# See Orange Pi Zero3 manual, chapter 3.16, page 124 for 26-pin header pinout
+#
+# Pin Connection
+# Waveshare       Orange Pi Zero3
+#   36    3.3V        17
+#   15    MOSI        19
+#   16    MISO        21  
+#   14    CLK         23
+#   38    GND         25
+#   4     BUSY        18
+#   20    RESET       22
+#   5     CS          24
+#   26    DIO1/IRQ    26
+
+Lora:
+  Module: sx1262  # Waveshare Raspberry Pico Lora module
+  DIO2_AS_RF_SWITCH: true
+  DIO3_TCXO_VOLTAGE: true
+  # Specify either the spidev1_1 or the CS below, not both!
+  # On DietPi Linux, when using the user overlay dietpi-spi1_1.dtbo, CS will be configured with spidev1.1
+  spidev: spidev1.1 # See Orange Pi Zero3 manual, chapter 3.18.3, page 130
+#  CS:             # CS     PIN_24 -> chip 1, line 233
+#    pin: 24
+#    gpiochip: 1
+#    line: 233
+  SCK:            # SCK     PIN_23 -> chip 1, line 230
+    pin: 23
+    gpiochip: 1
+    line: 230
+  Busy:           # BUSY    PIN_18 -> chip 1, line 78
+    pin: 18
+    gpiochip: 1
+    line: 78
+  MOSI:           # MOSI    PIN_19 -> chip 1, line 231
+    pin: 19
+    gpiochip: 1
+    line: 231
+  MISO:           # MISO    PIN_21 -> chip 1, line 232
+    pin: 21
+    gpiochip: 1
+    line: 232
+  Reset:          # NRST    PIN_22 -> chip 1, line 71
+    pin: 22
+    gpiochip: 1
+    line: 71
+  IRQ:            # DIO1    PIN_26 -> chip 1, line 74
+    pin: 26
+    gpiochip: 1
+    line: 74