diff --git a/src/graphics/Screen.cpp b/src/graphics/Screen.cpp
index 1ee0c0fdd..4f73c79be 100644
--- a/src/graphics/Screen.cpp
+++ b/src/graphics/Screen.cpp
@@ -1612,6 +1612,9 @@ void Screen::handleSetOn(bool on, FrameCallback einkScreensaver)
 #ifdef T_WATCH_S3
             PMU->enablePowerOutput(XPOWERS_ALDO2);
 #endif
+#ifdef HELTEC_TRACKER_V1_X
+            uint8_t tft_vext_enabled=digitalRead(VEXT_ENABLE);
+#endif
 #if !ARCH_PORTDUINO
             dispdev->displayOn();
 #endif
@@ -1622,6 +1625,13 @@ void Screen::handleSetOn(bool on, FrameCallback einkScreensaver)
 #endif
 
             dispdev->displayOn();
+#ifdef HELTEC_TRACKER_V1_X
+            // If the TFT VEXT power is not enabled, initialize the UI.
+            if(!tft_vext_enabled)
+            {
+            ui->init();
+            }
+#endif
 #ifdef USE_ST7789
             pinMode(VTFT_CTRL, OUTPUT);
             digitalWrite(VTFT_CTRL, LOW);
diff --git a/src/modules/Telemetry/Sensor/SHTC3Sensor.cpp b/src/modules/Telemetry/Sensor/SHTC3Sensor.cpp
index dbebec9d3..e9c4d2a0b 100644
--- a/src/modules/Telemetry/Sensor/SHTC3Sensor.cpp
+++ b/src/modules/Telemetry/Sensor/SHTC3Sensor.cpp
@@ -15,7 +15,7 @@ int32_t SHTC3Sensor::runOnce()
     if (!hasSensor()) {
         return DEFAULT_SENSOR_MINIMUM_WAIT_TIME_BETWEEN_READS;
     }
-    status = shtc3.begin();
+    status = shtc3.begin(nodeTelemetrySensorsMap[sensorType].second);
     return initI2CSensor();
 }
 
diff --git a/variants/heltec_vision_master_e213/variant.h b/variants/heltec_vision_master_e213/variant.h
index 49b8e91f5..ebb2c341f 100644
--- a/variants/heltec_vision_master_e213/variant.h
+++ b/variants/heltec_vision_master_e213/variant.h
@@ -31,7 +31,6 @@
 #define ADC_CHANNEL ADC1_GPIO7_CHANNEL
 #define ADC_MULTIPLIER 4.9 * 1.03
 #define ADC_ATTENUATION ADC_ATTEN_DB_2_5
-#define HAS_32768HZ
 
 // LoRa
 #define USE_SX1262
diff --git a/variants/heltec_vision_master_e290/variant.h b/variants/heltec_vision_master_e290/variant.h
index 9d6041539..02986d26b 100644
--- a/variants/heltec_vision_master_e290/variant.h
+++ b/variants/heltec_vision_master_e290/variant.h
@@ -30,7 +30,6 @@
 #define ADC_CHANNEL ADC1_GPIO7_CHANNEL
 #define ADC_MULTIPLIER 4.9 * 1.03
 #define ADC_ATTENUATION ADC_ATTEN_DB_2_5
-#define HAS_32768HZ
 
 // LoRa
 #define USE_SX1262
diff --git a/variants/heltec_vision_master_t190/variant.h b/variants/heltec_vision_master_t190/variant.h
index 1da3f9971..788466919 100644
--- a/variants/heltec_vision_master_t190/variant.h
+++ b/variants/heltec_vision_master_t190/variant.h
@@ -47,7 +47,6 @@
 #define ADC_CHANNEL ADC1_GPIO6_CHANNEL
 #define ADC_MULTIPLIER 4.9 * 1.03        // Voltage divider is roughly 1:1
 #define ADC_ATTENUATION ADC_ATTEN_DB_2_5 // Voltage divider output is quite high
-#define HAS_32768HZ
 
 // LoRa
 #define USE_SX1262
diff --git a/variants/heltec_wireless_paper/variant.h b/variants/heltec_wireless_paper/variant.h
index 0385945e6..bbfd54ada 100644
--- a/variants/heltec_wireless_paper/variant.h
+++ b/variants/heltec_wireless_paper/variant.h
@@ -28,7 +28,6 @@
 #define ADC_MULTIPLIER 2                // Voltage divider is roughly 1:1
 #define BAT_MEASURE_ADC_UNIT 2          // Use ADC2
 #define ADC_ATTENUATION ADC_ATTEN_DB_12 // Voltage divider output is quite high
-#define HAS_32768HZ
 #define ADC_CTRL_ENABLED LOW
 
 #define NO_EXT_GPIO 1
diff --git a/variants/heltec_wireless_paper_v1/variant.h b/variants/heltec_wireless_paper_v1/variant.h
index fe8f391df..4505395c9 100644
--- a/variants/heltec_wireless_paper_v1/variant.h
+++ b/variants/heltec_wireless_paper_v1/variant.h
@@ -29,7 +29,6 @@
 #define ADC_MULTIPLIER 2                // Voltage divider is roughly 1:1
 #define BAT_MEASURE_ADC_UNIT 2          // Use ADC2
 #define ADC_ATTENUATION ADC_ATTEN_DB_12 // Voltage divider output is quite high
-#define HAS_32768HZ
 #define ADC_CTRL_ENABLED LOW
 
 #define NO_EXT_GPIO 1