pohui_pohui/firmware
1
0
Fork 0
mirror of https://github.com/meshtastic/firmware.git synced 2025-04-28 02:32:09 +00:00
Code Issues Actions 3 Packages Projects Releases Wiki Activity

remove more stale eink code

Browse Source
This commit is contained in:
geeksville 2020-09-26 12:40:15 -07:00
parent d7fbcf89bf
commit db33200468
2 changed files with 8 additions and 17 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

2
platformio.ini
View File

@ -9,7 +9,7 @@
; https://docs.platformio.org/page/projectconf.html ; https://docs.platformio.org/page/projectconf.html
[platformio] [platformio]
default_envs = eink # lora-relay-v1 # nrf52840dk-geeksville # linux # or if you'd like to change the default to something like lora-relay-v1 put that here default_envs = tbeam # lora-relay-v1 # nrf52840dk-geeksville # linux # or if you'd like to change the default to something like lora-relay-v1 put that here
[common] [common]
; common is not currently used ; common is not currently used

23
variants/eink/variant.h
View File

@ -16,8 +16,8 @@
Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*/ */
#ifndef _VARIANT_LORA_RELAY_V1_ #ifndef _VARIANT_TTGO_EINK_V1_
#define _VARIANT_LORA_RELAY_V1_ #define _VARIANT_TTGO_EINK_V1_
/** Master clock frequency */ /** Master clock frequency */
#define VARIANT_MCK (64000000ul) #define VARIANT_MCK (64000000ul)
@ -27,9 +27,10 @@
/* /*
@geeksville eink TODO: @geeksville eink TODO:
fix bootloader to use two buttons - remove bootloader hacks
fix battery voltage sensing fix battery voltage sensing
get second button working in app load get second button working in app load
fix bootloader to use two buttons if battery falls too low deassert PWR_ON (to force board to shutdown)
fix display width and height fix display width and height
clean up eink drawing to not have the nasty timeout hack clean up eink drawing to not have the nasty timeout hack
put eink to sleep when we think the screen is off put eink to sleep when we think the screen is off
@ -41,7 +42,6 @@ make screen.adjustBrightness() a nop on eink screens
enable gps sleep mode enable gps sleep mode
use new flash chip use new flash chip
add factory/power on self test add factory/power on self test
*/ */
/*---------------------------------------------------------------------------- /*----------------------------------------------------------------------------
@ -106,13 +106,9 @@ work.
#define PIN_SERIAL2_TX (0 + 8) #define PIN_SERIAL2_TX (0 + 8)
// #define PIN_SERIAL2_EN (0 + 17) // #define PIN_SERIAL2_EN (0 + 17)
// Connected to Jlink CDC /**
// #define PIN_SERIAL2_RX (8) Wire Interfaces
// #define PIN_SERIAL2_TX (6) */
/*
* Wire Interfaces
*/
#define WIRE_INTERFACES_COUNT 1 #define WIRE_INTERFACES_COUNT 1
#define PIN_WIRE_SDA (26) // Not connected on board? #define PIN_WIRE_SDA (26) // Not connected on board?
@ -204,11 +200,6 @@ FIXME define/FIX flash access
#define PIN_SPI_MOSI (0 + 22) #define PIN_SPI_MOSI (0 + 22)
#define PIN_SPI_SCK (0 + 19) #define PIN_SPI_SCK (0 + 19)
// static const uint8_t SS = SX1262_CS;
// static const uint8_t MOSI = PIN_SPI_MOSI;
// static const uint8_t MISO = PIN_SPI_MISO;
// static const uint8_t SCK = PIN_SPI_SCK;
// To debug via the segger JLINK console rather than the CDC-ACM serial device // To debug via the segger JLINK console rather than the CDC-ACM serial device
#define USE_SEGGER #define USE_SEGGER